Mercurial > hg
view Makefile @ 23183:51c9196a6bd0
largefiles: remove meaningless code path for "hg pull --rebase"
This patch removes "--rebase" specific code path for "hg pull" in
"overridepull", because previous patch makes it meaningless: now,
"rebase.rebase" ("orig" invocation in this patch) can
update/commit largefiles safely without "repo._isrebasing = True".
As a side effect of removing "rebase.rebase" invocation in
"overridepull", this patch removes "nothing to rebase ..." message in
"test-largefiles.t", which is shown only when rebase extension is
enabled AFTER largefiles:
before this patch:
1. "dispatch" invokes "pullrebase" of rebase as "hg pull" at
first, because rebase wraps "hg pull" later
2. "pullrebase" invokes "overridepull" of largefiles as "orig",
even though rebase assumes that "orig" is "pull" of commands
3. "overridepull" executes "pull" and "rebase" directly
3.1 "pull" pulls changesets and creates new head "X"
3.2 "rebase" rebases current working parent "Y" on "X"
4. "overridepull" returns to "pullrebase"
5. "pullrebase" tries to rebase, but there is nothing to be done,
because "Y" is already rebased on "X". then, it shows "nothing
to rebase ..."
after this patch:
1. "dispatch" invokes "pullrebase" of rebase as "hg pull"
2. "pullrebase" invokes "overridepull" of largefiles as "orig"
3. "overridepull" executes "pull" as "orig"
4. "overridepull" returns to "pullrebase"
5. revision "Y" is not yet rebased, so "pullrebase" doesn't shows
"nothing to rebase ..."
As another side effect of removing "rebase.rebase" invocation, this
patch fixes issue3861, which occurs only when rebase extension is
enabled BEFORE largefiles:
before this patch:
1. "dispatch" invokes "overridepull" of largefiles at first,
because largefiles wrap "hg pull" later
2. "overridepull" executes "pull" and "rebase" explicitly
2.1 "pull" pulls changesets and creates new head "X"
2.2 "rebase" rebases current working parent, but fails because
no revision is checked out in issue3861 case
3. "overridepull" returns to "dispatch" with exit code 1 returned
from "rebase" at (2.2)
4. "hg pull" terminates with exit code 1 unexpectedly
after this patch:
1. "dispatch" invokes "overridepull" of largefiles at first
2. "overridepull" invokes "pullrebase" of rebase as "orig"
3. "pullrebase" invokes "pull" as "orig"
4. "pullrebase" invokes "rebase", and it fails
5. "pullrebase" returns to "overridepull" with exit code 0
(because "pullrebase" ignores result of "pull" and "rebase")
6. "overridepull" returns to "dispatch" with exit code 0 returned
from "rebase" at (5)
7. "hg pull" terminates with exit code 0
author | FUJIWARA Katsunori <foozy@lares.dti.ne.jp> |
---|---|
date | Wed, 05 Nov 2014 23:24:47 +0900 |
parents | a5d6a609752b |
children | 272b1cc3e83e |
line wrap: on
line source
# If you want to change PREFIX, do not just edit it below. The changed # value wont get passed on to recursive make calls. You should instead # override the variable on the command like: # # % make PREFIX=/opt/ install PREFIX=/usr/local export PREFIX PYTHON=python PURE= PYFILES:=$(shell find mercurial hgext doc -name '*.py') DOCFILES=mercurial/help/*.txt export LANGUAGE=C export LC_ALL=C # Set this to e.g. "mingw32" to use a non-default compiler. COMPILER= help: @echo 'Commonly used make targets:' @echo ' all - build program and documentation' @echo ' install - install program and man pages to $$PREFIX ($(PREFIX))' @echo ' install-home - install with setup.py install --home=$$HOME ($(HOME))' @echo ' local - build for inplace usage' @echo ' tests - run all tests in the automatic test suite' @echo ' test-foo - run only specified tests (e.g. test-merge1.t)' @echo ' dist - run all tests and create a source tarball in dist/' @echo ' clean - remove files created by other targets' @echo ' (except installed files or dist source tarball)' @echo ' update-pot - update i18n/hg.pot' @echo @echo 'Example for a system-wide installation under /usr/local:' @echo ' make all && su -c "make install" && hg version' @echo @echo 'Example for a local installation (usable in this directory):' @echo ' make local && ./hg version' all: build doc local: $(PYTHON) setup.py $(PURE) \ build_py -c -d . \ build_ext $(COMPILER:%=-c %) -i \ build_hgexe $(COMPILER:%=-c %) -i \ build_mo env HGRCPATH= $(PYTHON) hg version build: $(PYTHON) setup.py $(PURE) build $(COMPILER:%=-c %) doc: $(MAKE) -C doc clean: -$(PYTHON) setup.py clean --all # ignore errors from this command find contrib doc hgext i18n mercurial tests \ \( -name '*.py[cdo]' -o -name '*.so' \) -exec rm -f '{}' ';' rm -f $(addprefix mercurial/,$(notdir $(wildcard mercurial/pure/[a-z]*.py))) rm -f MANIFEST MANIFEST.in hgext/__index__.py tests/*.err if test -d .hg; then rm -f mercurial/__version__.py; fi rm -rf build mercurial/locale $(MAKE) -C doc clean install: install-bin install-doc install-bin: build $(PYTHON) setup.py $(PURE) install --root="$(DESTDIR)/" --prefix="$(PREFIX)" --force install-doc: doc cd doc && $(MAKE) $(MFLAGS) install install-home: install-home-bin install-home-doc install-home-bin: build $(PYTHON) setup.py $(PURE) install --home="$(HOME)" --prefix="" --force install-home-doc: doc cd doc && $(MAKE) $(MFLAGS) PREFIX="$(HOME)" install MANIFEST-doc: $(MAKE) -C doc MANIFEST MANIFEST.in: MANIFEST-doc hg manifest | sed -e 's/^/include /' > MANIFEST.in echo include mercurial/__version__.py >> MANIFEST.in sed -e 's/^/include /' < doc/MANIFEST >> MANIFEST.in dist: tests dist-notests dist-notests: doc MANIFEST.in TAR_OPTIONS="--owner=root --group=root --mode=u+w,go-w,a+rX-s" $(PYTHON) setup.py -q sdist check: tests tests: cd tests && $(PYTHON) run-tests.py $(TESTFLAGS) test-%: cd tests && $(PYTHON) run-tests.py $(TESTFLAGS) $@ check-code: hg manifest | xargs python contrib/check-code.py update-pot: i18n/hg.pot i18n/hg.pot: $(PYFILES) $(DOCFILES) i18n/posplit i18n/hggettext $(PYTHON) i18n/hggettext mercurial/commands.py \ hgext/*.py hgext/*/__init__.py \ mercurial/fileset.py mercurial/revset.py \ mercurial/templatefilters.py mercurial/templatekw.py \ mercurial/filemerge.py \ $(DOCFILES) > i18n/hg.pot.tmp # All strings marked for translation in Mercurial contain # ASCII characters only. But some files contain string # literals like this '\037\213'. xgettext thinks it has to # parse them even though they are not marked for translation. # Extracting with an explicit encoding of ISO-8859-1 will make # xgettext "parse" and ignore them. echo $(PYFILES) | xargs \ xgettext --package-name "Mercurial" \ --msgid-bugs-address "<mercurial-devel@selenic.com>" \ --copyright-holder "Matt Mackall <mpm@selenic.com> and others" \ --from-code ISO-8859-1 --join --sort-by-file --add-comments=i18n: \ -d hg -p i18n -o hg.pot.tmp $(PYTHON) i18n/posplit i18n/hg.pot.tmp # The target file is not created before the last step. So it never is in # an intermediate state. mv -f i18n/hg.pot.tmp i18n/hg.pot %.po: i18n/hg.pot # work on a temporary copy for never having a half completed target cp $@ $@.tmp msgmerge --no-location --update $@.tmp $^ mv -f $@.tmp $@ # Packaging targets osx: @which bdist_mpkg >/dev/null || \ (echo "Missing bdist_mpkg (easy_install bdist_mpkg)"; false) rm -rf dist/mercurial-*.mpkg bdist_mpkg setup.py mkdir -p packages/osx N=`cd dist && echo mercurial-*.mpkg | sed 's,\.mpkg$$,,'` && hdiutil create -srcfolder dist/$$N.mpkg/ -scrub -volname "$$N" -ov packages/osx/$$N.dmg rm -rf dist/mercurial-*.mpkg fedora20: mkdir -p packages/fedora20 contrib/buildrpm cp rpmbuild/RPMS/*/* packages/fedora20 cp rpmbuild/SRPMS/* packages/fedora20 rm -rf rpmbuild docker-fedora20: mkdir -p packages/fedora20 contrib/dockerrpm fedora20 centos5: mkdir -p packages/centos5 contrib/buildrpm --withpython cp rpmbuild/RPMS/*/* packages/centos5 cp rpmbuild/SRPMS/* packages/centos5 docker-centos5: mkdir -p packages/centos5 contrib/dockerrpm centos5 --withpython centos6: mkdir -p packages/centos6 contrib/buildrpm cp rpmbuild/RPMS/*/* packages/centos6 cp rpmbuild/SRPMS/* packages/centos6 docker-centos6: mkdir -p packages/centos6 contrib/dockerrpm centos6 centos7: mkdir -p packages/centos7 contrib/buildrpm cp rpmbuild/RPMS/*/* packages/centos7 cp rpmbuild/SRPMS/* packages/centos7 docker-centos7: mkdir -p packages/centos7 contrib/dockerrpm centos7 .PHONY: help all local build doc clean install install-bin install-doc \ install-home install-home-bin install-home-doc \ dist dist-notests check tests check-code update-pot \ osx fedora20 docker-fedora20 \ centos5 docker-centos5 centos6 docker-centos6 centos7 docker-centos7