view i18n/hggettext @ 23183:51c9196a6bd0

largefiles: remove meaningless code path for "hg pull --rebase" This patch removes "--rebase" specific code path for "hg pull" in "overridepull", because previous patch makes it meaningless: now, "rebase.rebase" ("orig" invocation in this patch) can update/commit largefiles safely without "repo._isrebasing = True". As a side effect of removing "rebase.rebase" invocation in "overridepull", this patch removes "nothing to rebase ..." message in "test-largefiles.t", which is shown only when rebase extension is enabled AFTER largefiles: before this patch: 1. "dispatch" invokes "pullrebase" of rebase as "hg pull" at first, because rebase wraps "hg pull" later 2. "pullrebase" invokes "overridepull" of largefiles as "orig", even though rebase assumes that "orig" is "pull" of commands 3. "overridepull" executes "pull" and "rebase" directly 3.1 "pull" pulls changesets and creates new head "X" 3.2 "rebase" rebases current working parent "Y" on "X" 4. "overridepull" returns to "pullrebase" 5. "pullrebase" tries to rebase, but there is nothing to be done, because "Y" is already rebased on "X". then, it shows "nothing to rebase ..." after this patch: 1. "dispatch" invokes "pullrebase" of rebase as "hg pull" 2. "pullrebase" invokes "overridepull" of largefiles as "orig" 3. "overridepull" executes "pull" as "orig" 4. "overridepull" returns to "pullrebase" 5. revision "Y" is not yet rebased, so "pullrebase" doesn't shows "nothing to rebase ..." As another side effect of removing "rebase.rebase" invocation, this patch fixes issue3861, which occurs only when rebase extension is enabled BEFORE largefiles: before this patch: 1. "dispatch" invokes "overridepull" of largefiles at first, because largefiles wrap "hg pull" later 2. "overridepull" executes "pull" and "rebase" explicitly 2.1 "pull" pulls changesets and creates new head "X" 2.2 "rebase" rebases current working parent, but fails because no revision is checked out in issue3861 case 3. "overridepull" returns to "dispatch" with exit code 1 returned from "rebase" at (2.2) 4. "hg pull" terminates with exit code 1 unexpectedly after this patch: 1. "dispatch" invokes "overridepull" of largefiles at first 2. "overridepull" invokes "pullrebase" of rebase as "orig" 3. "pullrebase" invokes "pull" as "orig" 4. "pullrebase" invokes "rebase", and it fails 5. "pullrebase" returns to "overridepull" with exit code 0 (because "pullrebase" ignores result of "pull" and "rebase") 6. "overridepull" returns to "dispatch" with exit code 0 returned from "rebase" at (5) 7. "hg pull" terminates with exit code 0
author FUJIWARA Katsunori <foozy@lares.dti.ne.jp>
date Wed, 05 Nov 2014 23:24:47 +0900
parents 80deae3bc5ea
children 2516bba643e7
line wrap: on
line source

#!/usr/bin/env python
#
# hggettext - carefully extract docstrings for Mercurial
#
# Copyright 2009 Matt Mackall <mpm@selenic.com> and others
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

# The normalize function is taken from pygettext which is distributed
# with Python under the Python License, which is GPL compatible.

"""Extract docstrings from Mercurial commands.

Compared to pygettext, this script knows about the cmdtable and table
dictionaries used by Mercurial, and will only extract docstrings from
functions mentioned therein.

Use xgettext like normal to extract strings marked as translatable and
join the message cataloges to get the final catalog.
"""

import os, sys, inspect


def escape(s):
    # The order is important, the backslash must be escaped first
    # since the other replacements introduce new backslashes
    # themselves.
    s = s.replace('\\', '\\\\')
    s = s.replace('\n', '\\n')
    s = s.replace('\r', '\\r')
    s = s.replace('\t', '\\t')
    s = s.replace('"', '\\"')
    return s


def normalize(s):
    # This converts the various Python string types into a format that
    # is appropriate for .po files, namely much closer to C style.
    lines = s.split('\n')
    if len(lines) == 1:
        s = '"' + escape(s) + '"'
    else:
        if not lines[-1]:
            del lines[-1]
            lines[-1] = lines[-1] + '\n'
        lines = map(escape, lines)
        lineterm = '\\n"\n"'
        s = '""\n"' + lineterm.join(lines) + '"'
    return s


def poentry(path, lineno, s):
    return ('#: %s:%d\n' % (path, lineno) +
            'msgid %s\n' % normalize(s) +
            'msgstr ""\n')


def offset(src, doc, name, default):
    """Compute offset or issue a warning on stdout."""
    # Backslashes in doc appear doubled in src.
    end = src.find(doc.replace('\\', '\\\\'))
    if end == -1:
        # This can happen if the docstring contains unnecessary escape
        # sequences such as \" in a triple-quoted string. The problem
        # is that \" is turned into " and so doc wont appear in src.
        sys.stderr.write("warning: unknown offset in %s, assuming %d lines\n"
                         % (name, default))
        return default
    else:
        return src.count('\n', 0, end)


def importpath(path):
    """Import a path like foo/bar/baz.py and return the baz module."""
    if path.endswith('.py'):
        path = path[:-3]
    if path.endswith('/__init__'):
        path = path[:-9]
    path = path.replace('/', '.')
    mod = __import__(path)
    for comp in path.split('.')[1:]:
        mod = getattr(mod, comp)
    return mod


def docstrings(path):
    """Extract docstrings from path.

    This respects the Mercurial cmdtable/table convention and will
    only extract docstrings from functions mentioned in these tables.
    """
    mod = importpath(path)
    if mod.__doc__:
        src = open(path).read()
        lineno = 1 + offset(src, mod.__doc__, path, 7)
        print poentry(path, lineno, mod.__doc__)

    functions = list(getattr(mod, 'i18nfunctions', []))
    functions = [(f, True) for f in functions]

    cmdtable = getattr(mod, 'cmdtable', {})
    if not cmdtable:
        # Maybe we are processing mercurial.commands?
        cmdtable = getattr(mod, 'table', {})
    functions.extend((c[0], False) for c in cmdtable.itervalues())

    for func, rstrip in functions:
        if func.__doc__:
            src = inspect.getsource(func)
            name = "%s.%s" % (path, func.__name__)
            lineno = func.func_code.co_firstlineno
            doc = func.__doc__
            if rstrip:
                doc = doc.rstrip()
            lineno += offset(src, doc, name, 1)
            print poentry(path, lineno, doc)


def rawtext(path):
    src = open(path).read()
    print poentry(path, 1, src)


if __name__ == "__main__":
    # It is very important that we import the Mercurial modules from
    # the source tree where hggettext is executed. Otherwise we might
    # accidentally import and extract strings from a Mercurial
    # installation mentioned in PYTHONPATH.
    sys.path.insert(0, os.getcwd())
    from mercurial import demandimport; demandimport.enable()
    for path in sys.argv[1:]:
        if path.endswith('.txt'):
            rawtext(path)
        else:
            docstrings(path)