largefiles: remove meaningless code path for "hg pull --rebase"
This patch removes "--rebase" specific code path for "hg pull" in
"overridepull", because previous patch makes it meaningless: now,
"rebase.rebase" ("orig" invocation in this patch) can
update/commit largefiles safely without "repo._isrebasing = True".
As a side effect of removing "rebase.rebase" invocation in
"overridepull", this patch removes "nothing to rebase ..." message in
"test-largefiles.t", which is shown only when rebase extension is
enabled AFTER largefiles:
before this patch:
1. "dispatch" invokes "pullrebase" of rebase as "hg pull" at
first, because rebase wraps "hg pull" later
2. "pullrebase" invokes "overridepull" of largefiles as "orig",
even though rebase assumes that "orig" is "pull" of commands
3. "overridepull" executes "pull" and "rebase" directly
3.1 "pull" pulls changesets and creates new head "X"
3.2 "rebase" rebases current working parent "Y" on "X"
4. "overridepull" returns to "pullrebase"
5. "pullrebase" tries to rebase, but there is nothing to be done,
because "Y" is already rebased on "X". then, it shows "nothing
to rebase ..."
after this patch:
1. "dispatch" invokes "pullrebase" of rebase as "hg pull"
2. "pullrebase" invokes "overridepull" of largefiles as "orig"
3. "overridepull" executes "pull" as "orig"
4. "overridepull" returns to "pullrebase"
5. revision "Y" is not yet rebased, so "pullrebase" doesn't shows
"nothing to rebase ..."
As another side effect of removing "rebase.rebase" invocation, this
patch fixes
issue3861, which occurs only when rebase extension is
enabled BEFORE largefiles:
before this patch:
1. "dispatch" invokes "overridepull" of largefiles at first,
because largefiles wrap "hg pull" later
2. "overridepull" executes "pull" and "rebase" explicitly
2.1 "pull" pulls changesets and creates new head "X"
2.2 "rebase" rebases current working parent, but fails because
no revision is checked out in
issue3861 case
3. "overridepull" returns to "dispatch" with exit code 1 returned
from "rebase" at (2.2)
4. "hg pull" terminates with exit code 1 unexpectedly
after this patch:
1. "dispatch" invokes "overridepull" of largefiles at first
2. "overridepull" invokes "pullrebase" of rebase as "orig"
3. "pullrebase" invokes "pull" as "orig"
4. "pullrebase" invokes "rebase", and it fails
5. "pullrebase" returns to "overridepull" with exit code 0
(because "pullrebase" ignores result of "pull" and "rebase")
6. "overridepull" returns to "dispatch" with exit code 0 returned
from "rebase" at (5)
7. "hg pull" terminates with exit code 0
$ HGMERGE=true; export HGMERGE
init
$ hg init repo
$ cd repo
commit
$ echo 'a' > a
$ hg ci -A -m test -u nobody -d '1 0'
adding a
annotate -c
$ hg annotate -c a
8435f90966e4: a
annotate -cl
$ hg annotate -cl a
8435f90966e4:1: a
annotate -d
$ hg annotate -d a
Thu Jan 01 00:00:01 1970 +0000: a
annotate -n
$ hg annotate -n a
0: a
annotate -nl
$ hg annotate -nl a
0:1: a
annotate -u
$ hg annotate -u a
nobody: a
annotate -cdnu
$ hg annotate -cdnu a
nobody 0 8435f90966e4 Thu Jan 01 00:00:01 1970 +0000: a
annotate -cdnul
$ hg annotate -cdnul a
nobody 0 8435f90966e4 Thu Jan 01 00:00:01 1970 +0000:1: a
annotate (JSON)
$ hg annotate -Tjson a
[
{
"line": "a\n",
"rev": 0
}
]
$ hg annotate -Tjson -cdfnul a
[
{
"date": [1.0, 0],
"file": "a",
"line": "a\n",
"line_number": 1,
"node": "8435f90966e442695d2ded29fdade2bac5ad8065",
"rev": 0,
"user": "nobody"
}
]
$ cat <<EOF >>a
> a
> a
> EOF
$ hg ci -ma1 -d '1 0'
$ hg cp a b
$ hg ci -mb -d '1 0'
$ cat <<EOF >> b
> b4
> b5
> b6
> EOF
$ hg ci -mb2 -d '2 0'
annotate -n b
$ hg annotate -n b
0: a
1: a
1: a
3: b4
3: b5
3: b6
annotate --no-follow b
$ hg annotate --no-follow b
2: a
2: a
2: a
3: b4
3: b5
3: b6
annotate -nl b
$ hg annotate -nl b
0:1: a
1:2: a
1:3: a
3:4: b4
3:5: b5
3:6: b6
annotate -nf b
$ hg annotate -nf b
0 a: a
1 a: a
1 a: a
3 b: b4
3 b: b5
3 b: b6
annotate -nlf b
$ hg annotate -nlf b
0 a:1: a
1 a:2: a
1 a:3: a
3 b:4: b4
3 b:5: b5
3 b:6: b6
$ hg up -C 2
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cat <<EOF >> b
> b4
> c
> b5
> EOF
$ hg ci -mb2.1 -d '2 0'
created new head
$ hg merge
merging b
0 files updated, 1 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg ci -mmergeb -d '3 0'
annotate after merge
$ hg annotate -nf b
0 a: a
1 a: a
1 a: a
3 b: b4
4 b: c
3 b: b5
annotate after merge with -l
$ hg annotate -nlf b
0 a:1: a
1 a:2: a
1 a:3: a
3 b:4: b4
4 b:5: c
3 b:5: b5
$ hg up -C 1
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg cp a b
$ cat <<EOF > b
> a
> z
> a
> EOF
$ hg ci -mc -d '3 0'
created new head
$ hg merge
merging b
0 files updated, 1 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ cat <<EOF >> b
> b4
> c
> b5
> EOF
$ echo d >> b
$ hg ci -mmerge2 -d '4 0'
annotate after rename merge
$ hg annotate -nf b
0 a: a
6 b: z
1 a: a
3 b: b4
4 b: c
3 b: b5
7 b: d
annotate after rename merge with -l
$ hg annotate -nlf b
0 a:1: a
6 b:2: z
1 a:3: a
3 b:4: b4
4 b:5: c
3 b:5: b5
7 b:7: d
Issue2807: alignment of line numbers with -l
$ echo more >> b
$ hg ci -mmore -d '5 0'
$ echo more >> b
$ hg ci -mmore -d '6 0'
$ echo more >> b
$ hg ci -mmore -d '7 0'
$ hg annotate -nlf b
0 a: 1: a
6 b: 2: z
1 a: 3: a
3 b: 4: b4
4 b: 5: c
3 b: 5: b5
7 b: 7: d
8 b: 8: more
9 b: 9: more
10 b:10: more
linkrev vs rev
$ hg annotate -r tip -n a
0: a
1: a
1: a
linkrev vs rev with -l
$ hg annotate -r tip -nl a
0:1: a
1:2: a
1:3: a
Issue589: "undelete" sequence leads to crash
annotate was crashing when trying to --follow something
like A -> B -> A
generate ABA rename configuration
$ echo foo > foo
$ hg add foo
$ hg ci -m addfoo
$ hg rename foo bar
$ hg ci -m renamefoo
$ hg rename bar foo
$ hg ci -m renamebar
annotate after ABA with follow
$ hg annotate --follow foo
foo: foo
missing file
$ hg ann nosuchfile
abort: nosuchfile: no such file in rev e9e6b4fa872f
[255]
annotate file without '\n' on last line
$ printf "" > c
$ hg ci -A -m test -u nobody -d '1 0'
adding c
$ hg annotate c
$ printf "a\nb" > c
$ hg ci -m test
$ hg annotate c
[0-9]+: a (re)
[0-9]+: b (re)
Issue3841: check annotation of the file of which filelog includes
merging between the revision and its ancestor
to reproduce the situation with recent Mercurial, this script uses (1)
"hg debugsetparents" to merge without ancestor check by "hg merge",
and (2) the extension to allow filelog merging between the revision
and its ancestor by overriding "repo._filecommit".
$ cat > ../legacyrepo.py <<EOF
> from mercurial import node, util
> def reposetup(ui, repo):
> class legacyrepo(repo.__class__):
> def _filecommit(self, fctx, manifest1, manifest2,
> linkrev, tr, changelist):
> fname = fctx.path()
> text = fctx.data()
> flog = self.file(fname)
> fparent1 = manifest1.get(fname, node.nullid)
> fparent2 = manifest2.get(fname, node.nullid)
> meta = {}
> copy = fctx.renamed()
> if copy and copy[0] != fname:
> raise util.Abort('copying is not supported')
> if fparent2 != node.nullid:
> changelist.append(fname)
> return flog.add(text, meta, tr, linkrev,
> fparent1, fparent2)
> raise util.Abort('only merging is supported')
> repo.__class__ = legacyrepo
> EOF
$ cat > baz <<EOF
> 1
> 2
> 3
> 4
> 5
> EOF
$ hg add baz
$ hg commit -m "baz:0"
$ cat > baz <<EOF
> 1 baz:1
> 2
> 3
> 4
> 5
> EOF
$ hg commit -m "baz:1"
$ cat > baz <<EOF
> 1 baz:1
> 2 baz:2
> 3
> 4
> 5
> EOF
$ hg debugsetparents 17 17
$ hg --config extensions.legacyrepo=../legacyrepo.py commit -m "baz:2"
$ hg debugindexdot .hg/store/data/baz.i
digraph G {
-1 -> 0
0 -> 1
1 -> 2
1 -> 2
}
$ hg annotate baz
17: 1 baz:1
18: 2 baz:2
16: 3
16: 4
16: 5
$ cat > baz <<EOF
> 1 baz:1
> 2 baz:2
> 3 baz:3
> 4
> 5
> EOF
$ hg commit -m "baz:3"
$ cat > baz <<EOF
> 1 baz:1
> 2 baz:2
> 3 baz:3
> 4 baz:4
> 5
> EOF
$ hg debugsetparents 19 18
$ hg --config extensions.legacyrepo=../legacyrepo.py commit -m "baz:4"
$ hg debugindexdot .hg/store/data/baz.i
digraph G {
-1 -> 0
0 -> 1
1 -> 2
1 -> 2
2 -> 3
3 -> 4
2 -> 4
}
$ hg annotate baz
17: 1 baz:1
18: 2 baz:2
19: 3 baz:3
20: 4 baz:4
16: 5
Test annotate with whitespace options
$ cd ..
$ hg init repo-ws
$ cd repo-ws
$ cat > a <<EOF
> aa
>
> b b
> EOF
$ hg ci -Am "adda"
adding a
$ sed 's/EOL$//g' > a <<EOF
> a a
>
> EOL
> b b
> EOF
$ hg ci -m "changea"
Annotate with no option
$ hg annotate a
1: a a
0:
1:
1: b b
Annotate with --ignore-space-change
$ hg annotate --ignore-space-change a
1: a a
1:
0:
0: b b
Annotate with --ignore-all-space
$ hg annotate --ignore-all-space a
0: a a
0:
1:
0: b b
Annotate with --ignore-blank-lines (similar to no options case)
$ hg annotate --ignore-blank-lines a
1: a a
0:
1:
1: b b
$ cd ..