largefiles: remove meaningless code path for "hg pull --rebase"
This patch removes "--rebase" specific code path for "hg pull" in
"overridepull", because previous patch makes it meaningless: now,
"rebase.rebase" ("orig" invocation in this patch) can
update/commit largefiles safely without "repo._isrebasing = True".
As a side effect of removing "rebase.rebase" invocation in
"overridepull", this patch removes "nothing to rebase ..." message in
"test-largefiles.t", which is shown only when rebase extension is
enabled AFTER largefiles:
before this patch:
1. "dispatch" invokes "pullrebase" of rebase as "hg pull" at
first, because rebase wraps "hg pull" later
2. "pullrebase" invokes "overridepull" of largefiles as "orig",
even though rebase assumes that "orig" is "pull" of commands
3. "overridepull" executes "pull" and "rebase" directly
3.1 "pull" pulls changesets and creates new head "X"
3.2 "rebase" rebases current working parent "Y" on "X"
4. "overridepull" returns to "pullrebase"
5. "pullrebase" tries to rebase, but there is nothing to be done,
because "Y" is already rebased on "X". then, it shows "nothing
to rebase ..."
after this patch:
1. "dispatch" invokes "pullrebase" of rebase as "hg pull"
2. "pullrebase" invokes "overridepull" of largefiles as "orig"
3. "overridepull" executes "pull" as "orig"
4. "overridepull" returns to "pullrebase"
5. revision "Y" is not yet rebased, so "pullrebase" doesn't shows
"nothing to rebase ..."
As another side effect of removing "rebase.rebase" invocation, this
patch fixes
issue3861, which occurs only when rebase extension is
enabled BEFORE largefiles:
before this patch:
1. "dispatch" invokes "overridepull" of largefiles at first,
because largefiles wrap "hg pull" later
2. "overridepull" executes "pull" and "rebase" explicitly
2.1 "pull" pulls changesets and creates new head "X"
2.2 "rebase" rebases current working parent, but fails because
no revision is checked out in
issue3861 case
3. "overridepull" returns to "dispatch" with exit code 1 returned
from "rebase" at (2.2)
4. "hg pull" terminates with exit code 1 unexpectedly
after this patch:
1. "dispatch" invokes "overridepull" of largefiles at first
2. "overridepull" invokes "pullrebase" of rebase as "orig"
3. "pullrebase" invokes "pull" as "orig"
4. "pullrebase" invokes "rebase", and it fails
5. "pullrebase" returns to "overridepull" with exit code 0
(because "pullrebase" ignores result of "pull" and "rebase")
6. "overridepull" returns to "dispatch" with exit code 0 returned
from "rebase" at (5)
7. "hg pull" terminates with exit code 0
$ cat <<EOF >> $HGRCPATH
> [extensions]
> notify=
>
> [hooks]
> incoming.notify = python:hgext.notify.hook
>
> [notify]
> sources = pull
> diffstat = False
>
> [usersubs]
> foo@bar = *
>
> [reposubs]
> * = baz
> EOF
$ hg help notify
notify extension - hooks for sending email push notifications
This extension implements hooks to send email notifications when changesets
are sent from or received by the local repository.
First, enable the extension as explained in "hg help extensions", and register
the hook you want to run. "incoming" and "changegroup" hooks are run when
changesets are received, while "outgoing" hooks are for changesets sent to
another repository:
[hooks]
# one email for each incoming changeset
incoming.notify = python:hgext.notify.hook
# one email for all incoming changesets
changegroup.notify = python:hgext.notify.hook
# one email for all outgoing changesets
outgoing.notify = python:hgext.notify.hook
This registers the hooks. To enable notification, subscribers must be assigned
to repositories. The "[usersubs]" section maps multiple repositories to a
given recipient. The "[reposubs]" section maps multiple recipients to a single
repository:
[usersubs]
# key is subscriber email, value is a comma-separated list of repo patterns
user@host = pattern
[reposubs]
# key is repo pattern, value is a comma-separated list of subscriber emails
pattern = user@host
A "pattern" is a "glob" matching the absolute path to a repository, optionally
combined with a revset expression. A revset expression, if present, is
separated from the glob by a hash. Example:
[reposubs]
*/widgets#branch(release) = qa-team@example.com
This sends to "qa-team@example.com" whenever a changeset on the "release"
branch triggers a notification in any repository ending in "widgets".
In order to place them under direct user management, "[usersubs]" and
"[reposubs]" sections may be placed in a separate "hgrc" file and incorporated
by reference:
[notify]
config = /path/to/subscriptionsfile
Notifications will not be sent until the "notify.test" value is set to
"False"; see below.
Notifications content can be tweaked with the following configuration entries:
notify.test
If "True", print messages to stdout instead of sending them. Default: True.
notify.sources
Space-separated list of change sources. Notifications are activated only
when a changeset's source is in this list. Sources may be:
"serve" changesets received via http or ssh
"pull" changesets received via "hg pull"
"unbundle" changesets received via "hg unbundle"
"push" changesets sent or received via "hg push"
"bundle" changesets sent via "hg unbundle"
Default: serve.
notify.strip
Number of leading slashes to strip from url paths. By default, notifications
reference repositories with their absolute path. "notify.strip" lets you
turn them into relative paths. For example, "notify.strip=3" will change
"/long/path/repository" into "repository". Default: 0.
notify.domain
Default email domain for sender or recipients with no explicit domain.
notify.style
Style file to use when formatting emails.
notify.template
Template to use when formatting emails.
notify.incoming
Template to use when run as an incoming hook, overriding "notify.template".
notify.outgoing
Template to use when run as an outgoing hook, overriding "notify.template".
notify.changegroup
Template to use when running as a changegroup hook, overriding
"notify.template".
notify.maxdiff
Maximum number of diff lines to include in notification email. Set to 0 to
disable the diff, or -1 to include all of it. Default: 300.
notify.maxsubject
Maximum number of characters in email's subject line. Default: 67.
notify.diffstat
Set to True to include a diffstat before diff content. Default: True.
notify.merge
If True, send notifications for merge changesets. Default: True.
notify.mbox
If set, append mails to this mbox file instead of sending. Default: None.
notify.fromauthor
If set, use the committer of the first changeset in a changegroup for the
"From" field of the notification mail. If not set, take the user from the
pushing repo. Default: False.
If set, the following entries will also be used to customize the
notifications:
email.from
Email "From" address to use if none can be found in the generated email
content.
web.baseurl
Root repository URL to combine with repository paths when making references.
See also "notify.strip".
no commands defined
$ hg init a
$ echo a > a/a
commit
$ hg --cwd a commit -Ama -d '0 0'
adding a
clone
$ hg --traceback clone a b
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a >> a/a
commit
$ hg --traceback --cwd a commit -Amb -d '1 0'
on Mac OS X 10.5 the tmp path is very long so would get stripped in the subject line
$ cat <<EOF >> $HGRCPATH
> [notify]
> maxsubject = 200
> EOF
the python call below wraps continuation lines, which appear on Mac OS X 10.5 because
of the very long subject line
pull (minimal config)
$ hg --traceback --cwd b pull ../a | \
> $PYTHON -c 'import sys,re; print re.sub("\n[\t ]", " ", sys.stdin.read()),'
pulling from ../a
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Date: * (glob)
Subject: changeset in $TESTTMP/b: b
From: test
X-Hg-Notification: changeset 0647d048b600
Message-Id: <*> (glob)
To: baz, foo@bar
changeset 0647d048b600 in $TESTTMP/b (glob)
details: $TESTTMP/b?cmd=changeset;node=0647d048b600
description: b
diffs (6 lines):
diff -r cb9a9f314b8b -r 0647d048b600 a
--- a/a Thu Jan 01 00:00:00 1970 +0000
+++ b/a Thu Jan 01 00:00:01 1970 +0000
@@ -1,1 +1,2 @@ a
+a
(run 'hg update' to get a working copy)
$ cat <<EOF >> $HGRCPATH
> [notify]
> config = `pwd`/.notify.conf
> domain = test.com
> strip = 42
> template = Subject: {desc|firstline|strip}\nFrom: {author}\nX-Test: foo\n\nchangeset {node|short} in {webroot}\ndescription:\n\t{desc|tabindent|strip}
>
> [web]
> baseurl = http://test/
> EOF
fail for config file is missing
$ hg --cwd b rollback
repository tip rolled back to revision 0 (undo pull)
$ hg --cwd b pull ../a 2>&1 | grep 'error.*\.notify\.conf' > /dev/null && echo pull failed
pull failed
$ touch ".notify.conf"
pull
$ hg --cwd b rollback
repository tip rolled back to revision 0 (undo pull)
$ hg --traceback --cwd b pull ../a | \
> $PYTHON -c 'import sys,re; print re.sub("\n\t", " ", sys.stdin.read()),'
pulling from ../a
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
X-Test: foo
Date: * (glob)
Subject: b
From: test@test.com
X-Hg-Notification: changeset 0647d048b600
Message-Id: <*> (glob)
To: baz@test.com, foo@bar
changeset 0647d048b600 in b
description: b
diffs (6 lines):
diff -r cb9a9f314b8b -r 0647d048b600 a
--- a/a Thu Jan 01 00:00:00 1970 +0000
+++ b/a Thu Jan 01 00:00:01 1970 +0000
@@ -1,1 +1,2 @@
a
+a
(run 'hg update' to get a working copy)
$ cat << EOF >> $HGRCPATH
> [hooks]
> incoming.notify = python:hgext.notify.hook
>
> [notify]
> sources = pull
> diffstat = True
> EOF
pull
$ hg --cwd b rollback
repository tip rolled back to revision 0 (undo pull)
$ hg --traceback --cwd b pull ../a | \
> $PYTHON -c 'import sys,re; print re.sub("\n\t", " ", sys.stdin.read()),'
pulling from ../a
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
X-Test: foo
Date: * (glob)
Subject: b
From: test@test.com
X-Hg-Notification: changeset 0647d048b600
Message-Id: <*> (glob)
To: baz@test.com, foo@bar
changeset 0647d048b600 in b
description: b
diffstat:
a | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diffs (6 lines):
diff -r cb9a9f314b8b -r 0647d048b600 a
--- a/a Thu Jan 01 00:00:00 1970 +0000
+++ b/a Thu Jan 01 00:00:01 1970 +0000
@@ -1,1 +1,2 @@
a
+a
(run 'hg update' to get a working copy)
test merge
$ cd a
$ hg up -C 0
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a >> a
$ hg ci -Am adda2 -d '2 0'
created new head
$ hg merge
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg ci -m merge -d '3 0'
$ cd ..
$ hg --traceback --cwd b pull ../a | \
> $PYTHON -c 'import sys,re; print re.sub("\n\t", " ", sys.stdin.read()),'
pulling from ../a
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 0 changes to 0 files
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
X-Test: foo
Date: * (glob)
Subject: adda2
From: test@test.com
X-Hg-Notification: changeset 0a184ce6067f
Message-Id: <*> (glob)
To: baz@test.com, foo@bar
changeset 0a184ce6067f in b
description: adda2
diffstat:
a | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diffs (6 lines):
diff -r cb9a9f314b8b -r 0a184ce6067f a
--- a/a Thu Jan 01 00:00:00 1970 +0000
+++ b/a Thu Jan 01 00:00:02 1970 +0000
@@ -1,1 +1,2 @@
a
+a
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
X-Test: foo
Date: * (glob)
Subject: merge
From: test@test.com
X-Hg-Notification: changeset 6a0cf76b2701
Message-Id: <*> (glob)
To: baz@test.com, foo@bar
changeset 6a0cf76b2701 in b
description: merge
(run 'hg update' to get a working copy)
non-ascii content and truncation of multi-byte subject
$ cat <<EOF >> $HGRCPATH
> [notify]
> maxsubject = 4
> EOF
$ echo a >> a/a
$ hg --cwd a --encoding utf-8 commit -A -d '0 0' \
> -m `$PYTHON -c 'print "\xc3\xa0\xc3\xa1\xc3\xa2\xc3\xa3\xc3\xa4"'`
$ hg --traceback --cwd b --encoding utf-8 pull ../a | \
> $PYTHON -c 'import sys,re; print re.sub("\n\t", " ", sys.stdin.read()),'
pulling from ../a
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
X-Test: foo
Date: * (glob)
Subject: \xc3\xa0... (esc)
From: test@test.com
X-Hg-Notification: changeset 7ea05ad269dc
Message-Id: <*> (glob)
To: baz@test.com, foo@bar
changeset 7ea05ad269dc in b
description: \xc3\xa0\xc3\xa1\xc3\xa2\xc3\xa3\xc3\xa4 (esc)
diffstat:
a | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diffs (7 lines):
diff -r 6a0cf76b2701 -r 7ea05ad269dc a
--- a/a Thu Jan 01 00:00:03 1970 +0000
+++ b/a Thu Jan 01 00:00:00 1970 +0000
@@ -1,2 +1,3 @@
a
a
+a
(run 'hg update' to get a working copy)
long lines
$ cat <<EOF >> $HGRCPATH
> [notify]
> maxsubject = 67
> test = False
> mbox = mbox
> EOF
$ $PYTHON -c 'file("a/a", "ab").write("no" * 500 + "\n")'
$ hg --cwd a commit -A -m "long line"
$ hg --traceback --cwd b pull ../a
pulling from ../a
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
notify: sending 2 subscribers 1 changes
(run 'hg update' to get a working copy)
$ $PYTHON -c 'import sys,re; print re.sub("\n\t", " ", file("b/mbox").read()),'
From test@test.com ... ... .. ..:..:.. .... (re)
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable
X-Test: foo
Date: * (glob)
Subject: long line
From: test@test.com
X-Hg-Notification: changeset e0be44cf638b
Message-Id: <hg.e0be44cf638b.*.*@*> (glob)
To: baz@test.com, foo@bar
changeset e0be44cf638b in b
description: long line
diffstat:
a | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diffs (8 lines):
diff -r 7ea05ad269dc -r e0be44cf638b a
--- a/a Thu Jan 01 00:00:00 1970 +0000
+++ b/a Thu Jan 01 00:00:00 1970 +0000
@@ -1,3 +1,4 @@
a
a
a
+nonononononononononononononononononononononononononononononononononononono=
nononononononononononononononononononononononononononononononononononononon=
ononononononononononononononononononononononononononononononononononononono=
nononononononononononononononononononononononononononononononononononononon=
ononononononononononononononononononononononononononononononononononononono=
nononononononononononononononononononononononononononononononononononononon=
ononononononononononononononononononononononononononononononononononononono=
nononononononononononononononononononononononononononononononononononononon=
ononononononononononononononononononononononononononononononononononononono=
nononononononononononononononononononononononononononononononononononononon=
ononononononononononononononononononononononononononononononononononononono=
nononononononononononononononononononononononononononononononononononononon=
ononononononononononononononononononononononononononononononononononononono=
nonononononononononononono
revset selection: send to address that matches branch and repo
$ cat << EOF >> $HGRCPATH
> [hooks]
> incoming.notify = python:hgext.notify.hook
>
> [notify]
> sources = pull
> test = True
> diffstat = False
> maxdiff = 0
>
> [reposubs]
> */a#branch(test) = will_no_be_send@example.com
> */b#branch(test) = notify@example.com
> EOF
$ hg --cwd a branch test
marked working directory as branch test
(branches are permanent and global, did you want a bookmark?)
$ echo a >> a/a
$ hg --cwd a ci -m test -d '1 0'
$ hg --traceback --cwd b pull ../a | \
> $PYTHON -c 'import sys,re; print re.sub("\n\t", " ", sys.stdin.read()),'
pulling from ../a
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
X-Test: foo
Date: * (glob)
Subject: test
From: test@test.com
X-Hg-Notification: changeset fbbcbc516f2f
Message-Id: <hg.fbbcbc516f2f.*.*@*> (glob)
To: baz@test.com, foo@bar, notify@example.com
changeset fbbcbc516f2f in b
description: test
(run 'hg update' to get a working copy)
revset selection: don't send to address that waits for mails
from different branch
$ hg --cwd a update default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a >> a/a
$ hg --cwd a ci -m test -d '1 0'
$ hg --traceback --cwd b pull ../a | \
> $PYTHON -c 'import sys,re; print re.sub("\n\t", " ", sys.stdin.read()),'
pulling from ../a
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 0 changes to 0 files (+1 heads)
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
X-Test: foo
Date: * (glob)
Subject: test
From: test@test.com
X-Hg-Notification: changeset 38b42fa092de
Message-Id: <hg.38b42fa092de.*.*@*> (glob)
To: baz@test.com, foo@bar
changeset 38b42fa092de in b
description: test
(run 'hg heads' to see heads)