view tests/test-revset.t @ 23183:51c9196a6bd0

largefiles: remove meaningless code path for "hg pull --rebase"

This patch removes "--rebase" specific code path for "hg pull" in
"overridepull", because previous patch makes it meaningless: now,
"rebase.rebase" ("orig" invocation in this patch) can
update/commit largefiles safely without "repo._isrebasing = True".

As a side effect of removing "rebase.rebase" invocation in
"overridepull", this patch removes "nothing to rebase ..." message in
"test-largefiles.t", which is shown only when rebase extension is
enabled AFTER largefiles:

  before this patch:

    1. "dispatch" invokes "pullrebase" of rebase as "hg pull" at
       first, because rebase wraps "hg pull" later

    2. "pullrebase" invokes "overridepull" of largefiles as "orig",
       even though rebase assumes that "orig" is "pull" of commands

    3. "overridepull" executes "pull" and "rebase" directly
      3.1 "pull" pulls changesets and creates new head "X"
      3.2 "rebase" rebases current working parent "Y" on "X"

    4. "overridepull" returns to "pullrebase"

    5. "pullrebase" tries to rebase, but there is nothing to be done,
       because "Y" is already rebased on "X". then, it shows "nothing
       to rebase ..."

  after this patch:

    1. "dispatch" invokes "pullrebase" of rebase as "hg pull"

    2. "pullrebase" invokes "overridepull" of largefiles as "orig"

    3. "overridepull" executes "pull" as "orig"

    4. "overridepull" returns to "pullrebase"

    5. revision "Y" is not yet rebased, so "pullrebase" doesn't shows
       "nothing to rebase ..."

As another side effect of removing "rebase.rebase" invocation, this
patch fixes issue3861, which occurs only when rebase extension is
enabled BEFORE largefiles:

  before this patch:

    1. "dispatch" invokes "overridepull" of largefiles at first,
       because largefiles wrap "hg pull" later

    2. "overridepull" executes "pull" and "rebase" explicitly
      2.1 "pull" pulls changesets and creates new head "X"
      2.2 "rebase" rebases current working parent, but fails because
          no revision is checked out in issue3861 case

    3. "overridepull" returns to "dispatch" with exit code 1 returned
       from "rebase" at (2.2)

    4. "hg pull" terminates with exit code 1 unexpectedly

  after this patch:

    1. "dispatch" invokes "overridepull" of largefiles at first

    2. "overridepull" invokes "pullrebase" of rebase as "orig"

    3. "pullrebase" invokes "pull" as "orig"

    4. "pullrebase" invokes "rebase", and it fails

    5. "pullrebase" returns to "overridepull" with exit code 0
       (because "pullrebase" ignores result of "pull" and "rebase")

    6. "overridepull" returns to "dispatch" with exit code 0 returned
       from "rebase" at (5)

    7. "hg pull" terminates with exit code 0

  $ HGENCODING=utf-8
  $ export HGENCODING

  $ try() {
  >   hg debugrevspec --debug "$@"
  > }

  $ log() {
  >   hg log --template '{rev}\n' -r "$1"
  > }

  $ hg init repo
  $ cd repo

  $ echo a > a
  $ hg branch a
  marked working directory as branch a
  (branches are permanent and global, did you want a bookmark?)
  $ hg ci -Aqm0

  $ echo b > b
  $ hg branch b
  marked working directory as branch b
  (branches are permanent and global, did you want a bookmark?)
  $ hg ci -Aqm1

  $ rm a
  $ hg branch a-b-c-
  marked working directory as branch a-b-c-
  (branches are permanent and global, did you want a bookmark?)
  $ hg ci -Aqm2 -u Bob

  $ hg log -r "extra('branch', 'a-b-c-')" --template '{rev}\n'
  2
  $ hg log -r "extra('branch')" --template '{rev}\n'
  0
  1
  2
  $ hg log -r "extra('branch', 're:a')" --template '{rev} {branch}\n'
  0 a
  2 a-b-c-

  $ hg co 1
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg branch +a+b+c+
  marked working directory as branch +a+b+c+
  (branches are permanent and global, did you want a bookmark?)
  $ hg ci -Aqm3

  $ hg co 2  # interleave
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo bb > b
  $ hg branch -- -a-b-c-
  marked working directory as branch -a-b-c-
  (branches are permanent and global, did you want a bookmark?)
  $ hg ci -Aqm4 -d "May 12 2005"

  $ hg co 3
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg branch !a/b/c/
  marked working directory as branch !a/b/c/
  (branches are permanent and global, did you want a bookmark?)
  $ hg ci -Aqm"5 bug"

  $ hg merge 4
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg branch _a_b_c_
  marked working directory as branch _a_b_c_
  (branches are permanent and global, did you want a bookmark?)
  $ hg ci -Aqm"6 issue619"

  $ hg branch .a.b.c.
  marked working directory as branch .a.b.c.
  (branches are permanent and global, did you want a bookmark?)
  $ hg ci -Aqm7

  $ hg branch all
  marked working directory as branch all
  (branches are permanent and global, did you want a bookmark?)

  $ hg co 4
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg branch é
  marked working directory as branch \xc3\xa9 (esc)
  (branches are permanent and global, did you want a bookmark?)
  $ hg ci -Aqm9

  $ hg tag -r6 1.0

  $ hg clone --quiet -U -r 7 . ../remote1
  $ hg clone --quiet -U -r 8 . ../remote2
  $ echo "[paths]" >> .hg/hgrc
  $ echo "default = ../remote1" >> .hg/hgrc

names that should work without quoting

  $ try a
  ('symbol', 'a')
  0
  $ try b-a
  (minus
    ('symbol', 'b')
    ('symbol', 'a'))
  1
  $ try _a_b_c_
  ('symbol', '_a_b_c_')
  6
  $ try _a_b_c_-a
  (minus
    ('symbol', '_a_b_c_')
    ('symbol', 'a'))
  6
  $ try .a.b.c.
  ('symbol', '.a.b.c.')
  7
  $ try .a.b.c.-a
  (minus
    ('symbol', '.a.b.c.')
    ('symbol', 'a'))
  7
  $ try -- '-a-b-c-' # complains
  hg: parse error at 7: not a prefix: end
  [255]
  $ log -a-b-c- # succeeds with fallback
  4

  $ try -- -a-b-c--a # complains
  (minus
    (minus
      (minus
        (negate
          ('symbol', 'a'))
        ('symbol', 'b'))
      ('symbol', 'c'))
    (negate
      ('symbol', 'a')))
  abort: unknown revision '-a'!
  [255]
  $ try é
  ('symbol', '\xc3\xa9')
  9

no quoting needed

  $ log ::a-b-c-
  0
  1
  2

quoting needed

  $ try '"-a-b-c-"-a'
  (minus
    ('string', '-a-b-c-')
    ('symbol', 'a'))
  4

  $ log '1 or 2'
  1
  2
  $ log '1|2'
  1
  2
  $ log '1 and 2'
  $ log '1&2'
  $ try '1&2|3' # precedence - and is higher
  (or
    (and
      ('symbol', '1')
      ('symbol', '2'))
    ('symbol', '3'))
  3
  $ try '1|2&3'
  (or
    ('symbol', '1')
    (and
      ('symbol', '2')
      ('symbol', '3')))
  1
  $ try '1&2&3' # associativity
  (and
    (and
      ('symbol', '1')
      ('symbol', '2'))
    ('symbol', '3'))
  $ try '1|(2|3)'
  (or
    ('symbol', '1')
    (group
      (or
        ('symbol', '2')
        ('symbol', '3'))))
  1
  2
  3
  $ log '1.0' # tag
  6
  $ log 'a' # branch
  0
  $ log '2785f51ee'
  0
  $ log 'date(2005)'
  4
  $ log 'date(this is a test)'
  hg: parse error at 10: unexpected token: symbol
  [255]
  $ log 'date()'
  hg: parse error: date requires a string
  [255]
  $ log 'date'
  hg: parse error: can't use date here
  [255]
  $ log 'date('
  hg: parse error at 5: not a prefix: end
  [255]
  $ log 'date(tip)'
  abort: invalid date: 'tip'
  [255]
  $ log '"date"'
  abort: unknown revision 'date'!
  [255]
  $ log 'date(2005) and 1::'
  4

ancestor can accept 0 or more arguments

  $ log 'ancestor()'
  $ log 'ancestor(1)'
  1
  $ log 'ancestor(4,5)'
  1
  $ log 'ancestor(4,5) and 4'
  $ log 'ancestor(0,0,1,3)'
  0
  $ log 'ancestor(3,1,5,3,5,1)'
  1
  $ log 'ancestor(0,1,3,5)'
  0
  $ log 'ancestor(1,2,3,4,5)'
  1
  $ log 'ancestors(5)'
  0
  1
  3
  5
  $ log 'ancestor(ancestors(5))'
  0
  $ log 'author(bob)'
  2
  $ log 'author("re:bob|test")'
  0
  1
  2
  3
  4
  5
  6
  7
  8
  9
  $ log 'branch(é)'
  8
  9
  $ log 'branch(a)'
  0
  $ hg log -r 'branch("re:a")' --template '{rev} {branch}\n'
  0 a
  2 a-b-c-
  3 +a+b+c+
  4 -a-b-c-
  5 !a/b/c/
  6 _a_b_c_
  7 .a.b.c.
  $ log 'children(ancestor(4,5))'
  2
  3
  $ log 'closed()'
  $ log 'contains(a)'
  0
  1
  3
  5
  $ log 'contains("../repo/a")'
  0
  1
  3
  5
  $ log 'desc(B)'
  5
  $ log 'descendants(2 or 3)'
  2
  3
  4
  5
  6
  7
  8
  9
  $ log 'file("b*")'
  1
  4
  $ log 'filelog("b")'
  1
  4
  $ log 'filelog("../repo/b")'
  1
  4
  $ log 'follow()'
  0
  1
  2
  4
  8
  9
  $ log 'grep("issue\d+")'
  6
  $ try 'grep("(")' # invalid regular expression
  (func
    ('symbol', 'grep')
    ('string', '('))
  hg: parse error: invalid match pattern: unbalanced parenthesis
  [255]
  $ try 'grep("\bissue\d+")'
  (func
    ('symbol', 'grep')
    ('string', '\x08issue\\d+'))
  $ try 'grep(r"\bissue\d+")'
  (func
    ('symbol', 'grep')
    ('string', '\\bissue\\d+'))
  6
  $ try 'grep(r"\")'
  hg: parse error at 7: unterminated string
  [255]
  $ log 'head()'
  0
  1
  2
  3
  4
  5
  6
  7
  9
  $ log 'heads(6::)'
  7
  $ log 'keyword(issue)'
  6
  $ log 'keyword("test a")'
  $ log 'limit(head(), 1)'
  0
  $ log 'matching(6)'
  6
  $ log 'matching(6:7, "phase parents user date branch summary files description substate")'
  6
  7

Testing min and max

max: simple

  $ log 'max(contains(a))'
  5

max: simple on unordered set)

  $ log 'max((4+0+2+5+7) and contains(a))'
  5

max: no result

  $ log 'max(contains(stringthatdoesnotappearanywhere))'

max: no result on unordered set

  $ log 'max((4+0+2+5+7) and contains(stringthatdoesnotappearanywhere))'

min: simple

  $ log 'min(contains(a))'
  0

min: simple on unordered set

  $ log 'min((4+0+2+5+7) and contains(a))'
  0

min: empty

  $ log 'min(contains(stringthatdoesnotappearanywhere))'

min: empty on unordered set

  $ log 'min((4+0+2+5+7) and contains(stringthatdoesnotappearanywhere))'


  $ log 'merge()'
  6
  $ log 'branchpoint()'
  1
  4
  $ log 'modifies(b)'
  4
  $ log 'modifies("path:b")'
  4
  $ log 'modifies("*")'
  4
  6
  $ log 'modifies("set:modified()")'
  4
  $ log 'id(5)'
  2
  $ log 'only(9)'
  8
  9
  $ log 'only(8)'
  8
  $ log 'only(9, 5)'
  2
  4
  8
  9
  $ log 'only(7 + 9, 5 + 2)'
  4
  6
  7
  8
  9

Test empty set input
  $ log 'only(p2())'
  $ log 'only(p1(), p2())'
  0
  1
  2
  4
  8
  9

Test explicit numeric revision
  $ log 'rev(-1)'
  $ log 'rev(0)'
  0
  $ log 'rev(9)'
  9
  $ log 'rev(10)'
  $ log 'rev(tip)'
  hg: parse error: rev expects a number
  [255]

  $ log 'outgoing()'
  8
  9
  $ log 'outgoing("../remote1")'
  8
  9
  $ log 'outgoing("../remote2")'
  3
  5
  6
  7
  9
  $ log 'p1(merge())'
  5
  $ log 'p2(merge())'
  4
  $ log 'parents(merge())'
  4
  5
  $ log 'p1(branchpoint())'
  0
  2
  $ log 'p2(branchpoint())'
  $ log 'parents(branchpoint())'
  0
  2
  $ log 'removes(a)'
  2
  6
  $ log 'roots(all())'
  0
  $ log 'reverse(2 or 3 or 4 or 5)'
  5
  4
  3
  2
  $ log 'reverse(all())'
  9
  8
  7
  6
  5
  4
  3
  2
  1
  0
  $ log 'rev(5)'
  5
  $ log 'sort(limit(reverse(all()), 3))'
  7
  8
  9
  $ log 'sort(2 or 3 or 4 or 5, date)'
  2
  3
  5
  4
  $ log 'tagged()'
  6
  $ log 'tag()'
  6
  $ log 'tag(1.0)'
  6
  $ log 'tag(tip)'
  9

test sort revset
--------------------------------------------

test when adding two unordered revsets

  $ log 'sort(keyword(issue) or modifies(b))'
  4
  6

test when sorting a reversed collection in the same way it is

  $ log 'sort(reverse(all()), -rev)'
  9
  8
  7
  6
  5
  4
  3
  2
  1
  0

test when sorting a reversed collection

  $ log 'sort(reverse(all()), rev)'
  0
  1
  2
  3
  4
  5
  6
  7
  8
  9


test sorting two sorted collections in different orders

  $ log 'sort(outgoing() or reverse(removes(a)), rev)'
  2
  6
  8
  9

test sorting two sorted collections in different orders backwards

  $ log 'sort(outgoing() or reverse(removes(a)), -rev)'
  9
  8
  6
  2

test subtracting something from an addset

  $ log '(outgoing() or removes(a)) - removes(a)'
  8
  9

test intersecting something with an addset

  $ log 'parents(outgoing() or removes(a))'
  1
  4
  5
  8

test that `or` operation combines elements in the right order:

  $ log '3:4 or 2:5'
  3
  4
  2
  5
  $ log '3:4 or 5:2'
  3
  4
  5
  2
  $ log 'sort(3:4 or 2:5)'
  2
  3
  4
  5
  $ log 'sort(3:4 or 5:2)'
  2
  3
  4
  5

check that conversion to only works
  $ try --optimize '::3 - ::1'
  (minus
    (dagrangepre
      ('symbol', '3'))
    (dagrangepre
      ('symbol', '1')))
  * optimized:
  (func
    ('symbol', 'only')
    (list
      ('symbol', '3')
      ('symbol', '1')))
  3
  $ try --optimize 'ancestors(1) - ancestors(3)'
  (minus
    (func
      ('symbol', 'ancestors')
      ('symbol', '1'))
    (func
      ('symbol', 'ancestors')
      ('symbol', '3')))
  * optimized:
  (func
    ('symbol', 'only')
    (list
      ('symbol', '1')
      ('symbol', '3')))
  $ try --optimize 'not ::2 and ::6'
  (and
    (not
      (dagrangepre
        ('symbol', '2')))
    (dagrangepre
      ('symbol', '6')))
  * optimized:
  (func
    ('symbol', 'only')
    (list
      ('symbol', '6')
      ('symbol', '2')))
  3
  4
  5
  6
  $ try --optimize 'ancestors(6) and not ancestors(4)'
  (and
    (func
      ('symbol', 'ancestors')
      ('symbol', '6'))
    (not
      (func
        ('symbol', 'ancestors')
        ('symbol', '4'))))
  * optimized:
  (func
    ('symbol', 'only')
    (list
      ('symbol', '6')
      ('symbol', '4')))
  3
  5
  6

we can use patterns when searching for tags

  $ log 'tag("1..*")'
  abort: tag '1..*' does not exist
  [255]
  $ log 'tag("re:1..*")'
  6
  $ log 'tag("re:[0-9].[0-9]")'
  6
  $ log 'tag("literal:1.0")'
  6
  $ log 'tag("re:0..*")'

  $ log 'tag(unknown)'
  abort: tag 'unknown' does not exist
  [255]
  $ log 'branch(unknown)'
  abort: unknown revision 'unknown'!
  [255]
  $ log 'user(bob)'
  2

  $ log '4::8'
  4
  8
  $ log '4:8'
  4
  5
  6
  7
  8

  $ log 'sort(!merge() & (modifies(b) | user(bob) | keyword(bug) | keyword(issue) & 1::9), "-date")'
  4
  2
  5

  $ log 'not 0 and 0:2'
  1
  2
  $ log 'not 1 and 0:2'
  0
  2
  $ log 'not 2 and 0:2'
  0
  1
  $ log '(1 and 2)::'
  $ log '(1 and 2):'
  $ log '(1 and 2):3'
  $ log 'sort(head(), -rev)'
  9
  7
  6
  5
  4
  3
  2
  1
  0
  $ log '4::8 - 8'
  4
  $ log 'matching(1 or 2 or 3) and (2 or 3 or 1)'
  2
  3
  1

issue2437

  $ log '3 and p1(5)'
  3
  $ log '4 and p2(6)'
  4
  $ log '1 and parents(:2)'
  1
  $ log '2 and children(1:)'
  2
  $ log 'roots(all()) or roots(all())'
  0
  $ hg debugrevspec 'roots(all()) or roots(all())'
  0
  $ log 'heads(branch(é)) or heads(branch(é))'
  9
  $ log 'ancestors(8) and (heads(branch("-a-b-c-")) or heads(branch(é)))'
  4

issue2654: report a parse error if the revset was not completely parsed

  $ log '1 OR 2'
  hg: parse error at 2: invalid token
  [255]

or operator should preserve ordering:
  $ log 'reverse(2::4) or tip'
  4
  2
  9

parentrevspec

  $ log 'merge()^0'
  6
  $ log 'merge()^'
  5
  $ log 'merge()^1'
  5
  $ log 'merge()^2'
  4
  $ log 'merge()^^'
  3
  $ log 'merge()^1^'
  3
  $ log 'merge()^^^'
  1

  $ log 'merge()~0'
  6
  $ log 'merge()~1'
  5
  $ log 'merge()~2'
  3
  $ log 'merge()~2^1'
  1
  $ log 'merge()~3'
  1

  $ log '(-3:tip)^'
  4
  6
  8

  $ log 'tip^foo'
  hg: parse error: ^ expects a number 0, 1, or 2
  [255]

multiple revspecs

  $ hg log -r 'tip~1:tip' -r 'tip~2:tip~1' --template '{rev}\n'
  8
  9
  4
  5
  6
  7

test usage in revpair (with "+")

(real pair)

  $ hg diff -r 'tip^^' -r 'tip'
  diff -r 2326846efdab -r 24286f4ae135 .hgtags
  --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
  +++ b/.hgtags	Thu Jan 01 00:00:00 1970 +0000
  @@ -0,0 +1,1 @@
  +e0cc66ef77e8b6f711815af4e001a6594fde3ba5 1.0
  $ hg diff -r 'tip^^::tip'
  diff -r 2326846efdab -r 24286f4ae135 .hgtags
  --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
  +++ b/.hgtags	Thu Jan 01 00:00:00 1970 +0000
  @@ -0,0 +1,1 @@
  +e0cc66ef77e8b6f711815af4e001a6594fde3ba5 1.0

(single rev)

  $ hg diff -r 'tip^' -r 'tip^'
  $ hg diff -r 'tip^::tip^ or tip^'

(single rev that does not looks like a range)

  $ hg diff -r 'tip^ or tip^'
  diff -r d5d0dcbdc4d9 .hgtags
  --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
  +++ b/.hgtags	* (glob)
  @@ -0,0 +1,1 @@
  +e0cc66ef77e8b6f711815af4e001a6594fde3ba5 1.0

(no rev)

  $ hg diff -r 'author("babar") or author("celeste")'
  abort: empty revision range
  [255]

aliases:

  $ echo '[revsetalias]' >> .hg/hgrc
  $ echo 'm = merge()' >> .hg/hgrc
  $ echo 'sincem = descendants(m)' >> .hg/hgrc
  $ echo 'd($1) = reverse(sort($1, date))' >> .hg/hgrc
  $ echo 'rs(ARG1, ARG2) = reverse(sort(ARG1, ARG2))' >> .hg/hgrc
  $ echo 'rs4(ARG1, ARGA, ARGB, ARG2) = reverse(sort(ARG1, ARG2))' >> .hg/hgrc

  $ try m
  ('symbol', 'm')
  (func
    ('symbol', 'merge')
    None)
  6

test alias recursion

  $ try sincem
  ('symbol', 'sincem')
  (func
    ('symbol', 'descendants')
    (func
      ('symbol', 'merge')
      None))
  6
  7

test infinite recursion

  $ echo 'recurse1 = recurse2' >> .hg/hgrc
  $ echo 'recurse2 = recurse1' >> .hg/hgrc
  $ try recurse1
  ('symbol', 'recurse1')
  hg: parse error: infinite expansion of revset alias "recurse1" detected
  [255]

  $ echo 'level1($1, $2) = $1 or $2' >> .hg/hgrc
  $ echo 'level2($1, $2) = level1($2, $1)' >> .hg/hgrc
  $ try "level2(level1(1, 2), 3)"
  (func
    ('symbol', 'level2')
    (list
      (func
        ('symbol', 'level1')
        (list
          ('symbol', '1')
          ('symbol', '2')))
      ('symbol', '3')))
  (or
    ('symbol', '3')
    (or
      ('symbol', '1')
      ('symbol', '2')))
  3
  1
  2

test nesting and variable passing

  $ echo 'nested($1) = nested2($1)' >> .hg/hgrc
  $ echo 'nested2($1) = nested3($1)' >> .hg/hgrc
  $ echo 'nested3($1) = max($1)' >> .hg/hgrc
  $ try 'nested(2:5)'
  (func
    ('symbol', 'nested')
    (range
      ('symbol', '2')
      ('symbol', '5')))
  (func
    ('symbol', 'max')
    (range
      ('symbol', '2')
      ('symbol', '5')))
  5

test variable isolation, variable placeholders are rewritten as string
then parsed and matched again as string. Check they do not leak too
far away.

  $ echo 'injectparamasstring = max("$1")' >> .hg/hgrc
  $ echo 'callinjection($1) = descendants(injectparamasstring)' >> .hg/hgrc
  $ try 'callinjection(2:5)'
  (func
    ('symbol', 'callinjection')
    (range
      ('symbol', '2')
      ('symbol', '5')))
  (func
    ('symbol', 'descendants')
    (func
      ('symbol', 'max')
      ('string', '$1')))
  abort: unknown revision '$1'!
  [255]

  $ echo 'injectparamasstring2 = max(_aliasarg("$1"))' >> .hg/hgrc
  $ echo 'callinjection2($1) = descendants(injectparamasstring2)' >> .hg/hgrc
  $ try 'callinjection2(2:5)'
  (func
    ('symbol', 'callinjection2')
    (range
      ('symbol', '2')
      ('symbol', '5')))
  hg: parse error: not a function: _aliasarg
  [255]
  >>> data = file('.hg/hgrc', 'rb').read()
  >>> file('.hg/hgrc', 'wb').write(data.replace('_aliasarg', ''))

  $ try 'd(2:5)'
  (func
    ('symbol', 'd')
    (range
      ('symbol', '2')
      ('symbol', '5')))
  (func
    ('symbol', 'reverse')
    (func
      ('symbol', 'sort')
      (list
        (range
          ('symbol', '2')
          ('symbol', '5'))
        ('symbol', 'date'))))
  4
  5
  3
  2
  $ try 'rs(2 or 3, date)'
  (func
    ('symbol', 'rs')
    (list
      (or
        ('symbol', '2')
        ('symbol', '3'))
      ('symbol', 'date')))
  (func
    ('symbol', 'reverse')
    (func
      ('symbol', 'sort')
      (list
        (or
          ('symbol', '2')
          ('symbol', '3'))
        ('symbol', 'date'))))
  3
  2
  $ try 'rs()'
  (func
    ('symbol', 'rs')
    None)
  hg: parse error: invalid number of arguments: 0
  [255]
  $ try 'rs(2)'
  (func
    ('symbol', 'rs')
    ('symbol', '2'))
  hg: parse error: invalid number of arguments: 1
  [255]
  $ try 'rs(2, data, 7)'
  (func
    ('symbol', 'rs')
    (list
      (list
        ('symbol', '2')
        ('symbol', 'data'))
      ('symbol', '7')))
  hg: parse error: invalid number of arguments: 3
  [255]
  $ try 'rs4(2 or 3, x, x, date)'
  (func
    ('symbol', 'rs4')
    (list
      (list
        (list
          (or
            ('symbol', '2')
            ('symbol', '3'))
          ('symbol', 'x'))
        ('symbol', 'x'))
      ('symbol', 'date')))
  (func
    ('symbol', 'reverse')
    (func
      ('symbol', 'sort')
      (list
        (or
          ('symbol', '2')
          ('symbol', '3'))
        ('symbol', 'date'))))
  3
  2

issue2549 - correct optimizations

  $ log 'limit(1 or 2 or 3, 2) and not 2'
  1
  $ log 'max(1 or 2) and not 2'
  $ log 'min(1 or 2) and not 1'
  $ log 'last(1 or 2, 1) and not 2'

issue4289 - ordering of built-ins
  $ hg log -M -q -r 3:2
  3:8528aa5637f2
  2:5ed5505e9f1c

test revsets started with 40-chars hash (issue3669)

  $ ISSUE3669_TIP=`hg tip --template '{node}'`
  $ hg log -r "${ISSUE3669_TIP}" --template '{rev}\n'
  9
  $ hg log -r "${ISSUE3669_TIP}^" --template '{rev}\n'
  8

test or-ed indirect predicates (issue3775)

  $ log '6 or 6^1' | sort
  5
  6
  $ log '6^1 or 6' | sort
  5
  6
  $ log '4 or 4~1' | sort
  2
  4
  $ log '4~1 or 4' | sort
  2
  4
  $ log '(0 or 2):(4 or 6) or 0 or 6' | sort
  0
  1
  2
  3
  4
  5
  6
  $ log '0 or 6 or (0 or 2):(4 or 6)' | sort
  0
  1
  2
  3
  4
  5
  6

tests for 'remote()' predicate:
#.  (csets in remote) (id)            (remote)
1.  less than local   current branch  "default"
2.  same with local   specified       "default"
3.  more than local   specified       specified

  $ hg clone --quiet -U . ../remote3
  $ cd ../remote3
  $ hg update -q 7
  $ echo r > r
  $ hg ci -Aqm 10
  $ log 'remote()'
  7
  $ log 'remote("a-b-c-")'
  2
  $ cd ../repo
  $ log 'remote(".a.b.c.", "../remote3")'

  $ cd ..

test author/desc/keyword in problematic encoding
# unicode: cp932:
# u30A2    0x83 0x41(= 'A')
# u30C2    0x83 0x61(= 'a')

  $ hg init problematicencoding
  $ cd problematicencoding

  $ python > setup.sh <<EOF
  > print u'''
  > echo a > text
  > hg add text
  > hg --encoding utf-8 commit -u '\u30A2' -m none
  > echo b > text
  > hg --encoding utf-8 commit -u '\u30C2' -m none
  > echo c > text
  > hg --encoding utf-8 commit -u none -m '\u30A2'
  > echo d > text
  > hg --encoding utf-8 commit -u none -m '\u30C2'
  > '''.encode('utf-8')
  > EOF
  $ sh < setup.sh

test in problematic encoding
  $ python > test.sh <<EOF
  > print u'''
  > hg --encoding cp932 log --template '{rev}\\n' -r 'author(\u30A2)'
  > echo ====
  > hg --encoding cp932 log --template '{rev}\\n' -r 'author(\u30C2)'
  > echo ====
  > hg --encoding cp932 log --template '{rev}\\n' -r 'desc(\u30A2)'
  > echo ====
  > hg --encoding cp932 log --template '{rev}\\n' -r 'desc(\u30C2)'
  > echo ====
  > hg --encoding cp932 log --template '{rev}\\n' -r 'keyword(\u30A2)'
  > echo ====
  > hg --encoding cp932 log --template '{rev}\\n' -r 'keyword(\u30C2)'
  > '''.encode('cp932')
  > EOF
  $ sh < test.sh
  0
  ====
  1
  ====
  2
  ====
  3
  ====
  0
  2
  ====
  1
  3

  $ cd ..