view tests/test-check-code.t @ 21022:52e9e63f1495

run-tests: test result shows when a failed test could not start a server

Failing to start a server happens regularly, at least on windows buildbot.
Such a failure often has nothing to do with the test, but with the environment.
But half the test output can change because some data is missing. Therefore this
is worth an extended error message.

Detect the server failure in the diff output because it is most reliable
there. Checking the output only does not show if the server failure was
expected.

 Old failure message when server start failed:
Failed test-serve.t: output changed

 New message:
Failed test-serve.t: serve failed and output changed

  $ cat > correct.py <<EOF
  > def toto(arg1, arg2):
  >     del arg2
  >     return (5 + 6, 9)
  > EOF
  $ cat > wrong.py <<EOF
  > def toto( arg1, arg2):
  >     del(arg2)
  >     return ( 5+6, 9)
  > EOF
  $ cat > quote.py <<EOF
  > # let's use quote in comments
  > (''' ( 4x5 )
  > but """\\''' and finally''',
  > """let's fool checkpatch""", '1+2',
  > '"""', 42+1, """and
  > ( 4-1 ) """, "( 1+1 )\" and ")
  > a, '\\\\\\\\', "\\\\\\" x-2", "c-1"
  > EOF
  $ cat > non-py24.py <<EOF
  > # Using builtins that does not exist in Python 2.4
  > if any():
  >     x = all()
  >     y = format(x)
  >     # next(generator) is new in 2.6
  >     z = next(x)
  >     # but generator.next() is okay
  >     x.next()
  >     # and we can make our own next
  >     def next(stuff):
  >         pass
  > 
  > # Do not complain about our own definition
  > def any(x):
  >     pass
  > 
  > # try/except/finally block does not exist in Python 2.4
  >     try:
  >         pass
  >     except StandardError, inst:
  >         pass
  >     finally:
  >         pass
  > 
  > # nested try/finally+try/except is allowed
  >     try:
  >         try:
  >             pass
  >         except StandardError, inst:
  >             pass
  >     finally:
  >         pass
  > 
  > # yield inside a try/finally block is not allowed in Python 2.4
  >     try:
  >         pass
  >         yield 1
  >     finally:
  >         pass
  >     try:
  >         yield
  >         pass
  >     finally:
  >         pass
  > 
  > EOF
  $ cat > classstyle.py <<EOF
  > class newstyle_class(object):
  >     pass
  > 
  > class oldstyle_class:
  >     pass
  > 
  > class empty():
  >     pass
  > 
  > no_class = 1:
  >     pass
  > EOF
  $ check_code="$TESTDIR"/../contrib/check-code.py
  $ "$check_code" ./wrong.py ./correct.py ./quote.py ./non-py24.py ./classstyle.py
  ./wrong.py:1:
   > def toto( arg1, arg2):
   gratuitous whitespace in () or []
  ./wrong.py:2:
   >     del(arg2)
   Python keyword is not a function
  ./wrong.py:3:
   >     return ( 5+6, 9)
   gratuitous whitespace in () or []
   missing whitespace in expression
  ./quote.py:5:
   > '"""', 42+1, """and
   missing whitespace in expression
  ./non-py24.py:2:
   > if any():
   any/all/format not available in Python 2.4
  ./non-py24.py:3:
   >     x = all()
   any/all/format not available in Python 2.4
  ./non-py24.py:4:
   >     y = format(x)
   any/all/format not available in Python 2.4
  ./non-py24.py:6:
   >     z = next(x)
   no next(foo) in Python 2.4 and 2.5, use foo.next() instead
  ./non-py24.py:18:
   >     try:
   no try/except/finally in Python 2.4
  ./non-py24.py:35:
   >     try:
   no yield inside try/finally in Python 2.4
  ./non-py24.py:40:
   >     try:
   no yield inside try/finally in Python 2.4
  ./classstyle.py:4:
   > class oldstyle_class:
   old-style class, use class foo(object)
  ./classstyle.py:7:
   > class empty():
   class foo() not available in Python 2.4, use class foo(object)
  [1]
  $ cat > python3-compat.py << EOF
  > foo <> bar
  > reduce(lambda a, b: a + b, [1, 2, 3, 4])
  > dict(key=value)
  > EOF
  $ "$check_code" python3-compat.py
  python3-compat.py:1:
   > foo <> bar
   <> operator is not available in Python 3+, use !=
  python3-compat.py:2:
   > reduce(lambda a, b: a + b, [1, 2, 3, 4])
   reduce is not available in Python 3+
  python3-compat.py:3:
   > dict(key=value)
   dict() is different in Py2 and 3 and is slower than {}
  [1]

  $ cat > is-op.py <<EOF
  > # is-operator comparing number or string literal
  > x = None
  > y = x is 'foo'
  > y = x is "foo"
  > y = x is 5346
  > y = x is -6
  > y = x is not 'foo'
  > y = x is not "foo"
  > y = x is not 5346
  > y = x is not -6
  > EOF

  $ "$check_code" ./is-op.py
  ./is-op.py:3:
   > y = x is 'foo'
   object comparison with literal
  ./is-op.py:4:
   > y = x is "foo"
   object comparison with literal
  ./is-op.py:5:
   > y = x is 5346
   object comparison with literal
  ./is-op.py:6:
   > y = x is -6
   object comparison with literal
  ./is-op.py:7:
   > y = x is not 'foo'
   object comparison with literal
  ./is-op.py:8:
   > y = x is not "foo"
   object comparison with literal
  ./is-op.py:9:
   > y = x is not 5346
   object comparison with literal
  ./is-op.py:10:
   > y = x is not -6
   object comparison with literal
  [1]

  $ cat > for-nolineno.py <<EOF
  > except:
  > EOF
  $ "$check_code" for-nolineno.py --nolineno
  for-nolineno.py:0:
   > except:
   naked except clause
  [1]

  $ cat > warning.t <<EOF
  >   $ function warnonly {
  >   > }
  >   $ diff -N aaa
  >   $ function onwarn {}
  > EOF
  $ "$check_code" warning.t
  $ "$check_code" --warn warning.t
  warning.t:1:
   >   $ function warnonly {
   warning: don't use 'function', use old style
  warning.t:3:
   >   $ diff -N aaa
   warning: don't use 'diff -N'
  warning.t:4:
   >   $ function onwarn {}
   warning: don't use 'function', use old style
  [1]
  $ cat > raise-format.py <<EOF
  > raise SomeException, message
  > # this next line is okay
  > raise SomeException(arg1, arg2)
  > EOF
  $ "$check_code" not-existing.py raise-format.py
  Skipping*not-existing.py* (glob)
  raise-format.py:1:
   > raise SomeException, message
   don't use old-style two-argument raise, use Exception(message)
  [1]

  $ cat > rst.py <<EOF
  > """problematic rst text
  > 
  > .. note::
  >     wrong
  > """
  > 
  > '''
  > 
  > .. note::
  > 
  >     valid
  > 
  > new text
  > 
  >     .. note::
  > 
  >         also valid
  > '''
  > 
  > """mixed
  > 
  > .. note::
  > 
  >   good
  > 
  >     .. note::
  >         plus bad
  > """
  > EOF
  $ $check_code -w rst.py
  rst.py:3:
   > .. note::
   warning: add two newlines after '.. note::'
  rst.py:26:
   >     .. note::
   warning: add two newlines after '.. note::'
  [1]