Mercurial > hg
view tests/test-http.t @ 21022:52e9e63f1495
run-tests: test result shows when a failed test could not start a server
Failing to start a server happens regularly, at least on windows buildbot.
Such a failure often has nothing to do with the test, but with the environment.
But half the test output can change because some data is missing. Therefore this
is worth an extended error message.
Detect the server failure in the diff output because it is most reliable
there. Checking the output only does not show if the server failure was
expected.
Old failure message when server start failed:
Failed test-serve.t: output changed
New message:
Failed test-serve.t: serve failed and output changed
author | Simon Heimberg <simohe@besonet.ch> |
---|---|
date | Mon, 25 Nov 2013 22:00:46 +0100 |
parents | 63659b809021 |
children | 9fcf772f15ff |
line wrap: on
line source
$ "$TESTDIR/hghave" serve || exit 80 $ hg init test $ cd test $ echo foo>foo $ mkdir foo.d foo.d/bAr.hg.d foo.d/baR.d.hg $ echo foo>foo.d/foo $ echo bar>foo.d/bAr.hg.d/BaR $ echo bar>foo.d/baR.d.hg/bAR $ hg commit -A -m 1 adding foo adding foo.d/bAr.hg.d/BaR adding foo.d/baR.d.hg/bAR adding foo.d/foo $ hg serve -p $HGPORT -d --pid-file=../hg1.pid -E ../error.log $ hg --config server.uncompressed=False serve -p $HGPORT1 -d --pid-file=../hg2.pid Test server address cannot be reused #if windows $ hg serve -p $HGPORT1 2>&1 abort: cannot start server at ':$HGPORT1': * (glob) [255] #else $ hg serve -p $HGPORT1 2>&1 abort: cannot start server at ':$HGPORT1': Address already in use [255] #endif $ cd .. $ cat hg1.pid hg2.pid >> $DAEMON_PIDS clone via stream $ hg clone --uncompressed http://localhost:$HGPORT/ copy 2>&1 streaming all changes 6 files to transfer, 606 bytes of data transferred * bytes in * seconds (*/sec) (glob) updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg verify -R copy checking changesets checking manifests crosschecking files in changesets and manifests checking files 4 files, 1 changesets, 4 total revisions try to clone via stream, should use pull instead $ hg clone --uncompressed http://localhost:$HGPORT1/ copy2 requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 4 changes to 4 files updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved clone via pull $ hg clone http://localhost:$HGPORT1/ copy-pull requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 4 changes to 4 files updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg verify -R copy-pull checking changesets checking manifests crosschecking files in changesets and manifests checking files 4 files, 1 changesets, 4 total revisions $ cd test $ echo bar > bar $ hg commit -A -d '1 0' -m 2 adding bar $ cd .. clone over http with --update $ hg clone http://localhost:$HGPORT1/ updated --update 0 requesting all changes adding changesets adding manifests adding file changes added 2 changesets with 5 changes to 5 files updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg log -r . -R updated changeset: 0:8b6053c928fe user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 1 $ rm -rf updated incoming via HTTP $ hg clone http://localhost:$HGPORT1/ --rev 0 partial adding changesets adding manifests adding file changes added 1 changesets with 4 changes to 4 files updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd partial $ touch LOCAL $ hg ci -qAm LOCAL $ hg incoming http://localhost:$HGPORT1/ --template '{desc}\n' comparing with http://localhost:$HGPORT1/ searching for changes 2 $ cd .. pull $ cd copy-pull $ echo '[hooks]' >> .hg/hgrc $ echo "changegroup = python \"$TESTDIR/printenv.py\" changegroup" >> .hg/hgrc $ hg pull pulling from http://localhost:$HGPORT1/ searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files changegroup hook: HG_NODE=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_SOURCE=pull HG_URL=http://localhost:$HGPORT1/ (run 'hg update' to get a working copy) $ cd .. clone from invalid URL $ hg clone http://localhost:$HGPORT/bad abort: HTTP Error 404: Not Found [255] test http authentication + use the same server to test server side streaming preference $ cd test $ cat << EOT > userpass.py > import base64 > from mercurial.hgweb import common > def perform_authentication(hgweb, req, op): > auth = req.env.get('HTTP_AUTHORIZATION') > if not auth: > raise common.ErrorResponse(common.HTTP_UNAUTHORIZED, 'who', > [('WWW-Authenticate', 'Basic Realm="mercurial"')]) > if base64.b64decode(auth.split()[1]).split(':', 1) != ['user', 'pass']: > raise common.ErrorResponse(common.HTTP_FORBIDDEN, 'no') > def extsetup(): > common.permhooks.insert(0, perform_authentication) > EOT $ hg --config extensions.x=userpass.py serve -p $HGPORT2 -d --pid-file=pid \ > --config server.preferuncompressed=True \ > --config web.push_ssl=False --config web.allow_push=* -A ../access.log $ cat pid >> $DAEMON_PIDS $ cat << EOF > get_pass.py > import getpass > def newgetpass(arg): > return "pass" > getpass.getpass = newgetpass > EOF #if python243 $ hg id http://localhost:$HGPORT2/ abort: http authorization required for http://localhost:$HGPORT2/ [255] $ hg id http://localhost:$HGPORT2/ abort: http authorization required for http://localhost:$HGPORT2/ [255] $ hg id --config ui.interactive=true --config extensions.getpass=get_pass.py http://user@localhost:$HGPORT2/ http authorization required for http://localhost:$HGPORT2/ realm: mercurial user: user password: 5fed3813f7f5 $ hg id http://user:pass@localhost:$HGPORT2/ 5fed3813f7f5 #endif $ echo '[auth]' >> .hg/hgrc $ echo 'l.schemes=http' >> .hg/hgrc $ echo 'l.prefix=lo' >> .hg/hgrc $ echo 'l.username=user' >> .hg/hgrc $ echo 'l.password=pass' >> .hg/hgrc $ hg id http://localhost:$HGPORT2/ 5fed3813f7f5 $ hg id http://localhost:$HGPORT2/ 5fed3813f7f5 $ hg id http://user@localhost:$HGPORT2/ 5fed3813f7f5 #if python243 $ hg clone http://user:pass@localhost:$HGPORT2/ dest 2>&1 streaming all changes 7 files to transfer, 916 bytes of data transferred * bytes in * seconds (*/sec) (glob) updating to branch default 5 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg id http://user2@localhost:$HGPORT2/ abort: http authorization required for http://localhost:$HGPORT2/ [255] $ hg id http://user:pass2@localhost:$HGPORT2/ abort: HTTP Error 403: no [255] $ hg -R dest tag -r tip top $ hg -R dest push http://user:pass@localhost:$HGPORT2/ pushing to http://user:***@localhost:$HGPORT2/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 1 changes to 1 files $ hg rollback -q $ cut -c38- ../access.log "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=branchmap HTTP/1.1" 200 - "GET /?cmd=stream_out HTTP/1.1" 401 - "GET /?cmd=stream_out HTTP/1.1" 200 - "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 403 - x-hgarg-1:namespace=namespaces "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D7f4e523d01f2cc3765ac8934da3d14db775ff872 "GET /?cmd=branchmap HTTP/1.1" 200 - "GET /?cmd=branchmap HTTP/1.1" 200 - "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=bookmarks "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=686173686564+5eb5abfefeea63c80dd7553bcc3783f37e0c5524 "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks #endif $ cd .. clone of serve with repo in root and unserved subrepo (issue2970) $ hg --cwd test init sub $ echo empty > test/sub/empty $ hg --cwd test/sub add empty $ hg --cwd test/sub commit -qm 'add empty' $ hg --cwd test/sub tag -r 0 something $ echo sub = sub > test/.hgsub $ hg --cwd test add .hgsub $ hg --cwd test commit -qm 'add subrepo' $ hg clone http://localhost:$HGPORT noslash-clone requesting all changes adding changesets adding manifests adding file changes added 3 changesets with 7 changes to 7 files updating to branch default abort: HTTP Error 404: Not Found [255] $ hg clone http://localhost:$HGPORT/ slash-clone requesting all changes adding changesets adding manifests adding file changes added 3 changesets with 7 changes to 7 files updating to branch default abort: HTTP Error 404: Not Found [255] check error log $ cat error.log