testrunner: make `-j100 --runs-per-test=100 test-foo.t` use 100 jobs
It would use only 1 job since
1039404c5e1d (run-tests: print number of
tests and parallel process count, 2018-10-13), but I'm pretty sure
that was unintentional.
Differential Revision: https://phab.mercurial-scm.org/D5557
$ cat << EOF >> $HGRCPATH
> [ui]
> ssh="$PYTHON" "$TESTDIR/dummyssh"
> EOF
Set up repo
$ hg --config experimental.treemanifest=True init repo
$ cd repo
Requirements get set on init
$ grep treemanifest .hg/requires
treemanifest
Without directories, looks like any other repo
$ echo 0 > a
$ echo 0 > b
$ hg ci -Aqm initial
$ hg debugdata -m 0
a\x00362fef284ce2ca02aecc8de6d5e8a1c3af0556fe (esc)
b\x00362fef284ce2ca02aecc8de6d5e8a1c3af0556fe (esc)
Submanifest is stored in separate revlog
$ mkdir dir1
$ echo 1 > dir1/a
$ echo 1 > dir1/b
$ echo 1 > e
$ hg ci -Aqm 'add dir1'
$ hg debugdata -m 1
a\x00362fef284ce2ca02aecc8de6d5e8a1c3af0556fe (esc)
b\x00362fef284ce2ca02aecc8de6d5e8a1c3af0556fe (esc)
dir1\x008b3ffd73f901e83304c83d33132c8e774ceac44et (esc)
e\x00b8e02f6433738021a065f94175c7cd23db5f05be (esc)
$ hg debugdata --dir dir1 0
a\x00b8e02f6433738021a065f94175c7cd23db5f05be (esc)
b\x00b8e02f6433738021a065f94175c7cd23db5f05be (esc)
Can add nested directories
$ mkdir dir1/dir1
$ echo 2 > dir1/dir1/a
$ echo 2 > dir1/dir1/b
$ mkdir dir1/dir2
$ echo 2 > dir1/dir2/a
$ echo 2 > dir1/dir2/b
$ hg ci -Aqm 'add dir1/dir1'
$ hg files -r .
a
b
dir1/a
dir1/b
dir1/dir1/a
dir1/dir1/b
dir1/dir2/a
dir1/dir2/b
e
The manifest command works
$ hg manifest
a
b
dir1/a
dir1/b
dir1/dir1/a
dir1/dir1/b
dir1/dir2/a
dir1/dir2/b
e
Revision is not created for unchanged directory
$ mkdir dir2
$ echo 3 > dir2/a
$ hg add dir2
adding dir2/a
$ hg debugindex --dir dir1 > before
$ hg ci -qm 'add dir2'
$ hg debugindex --dir dir1 > after
$ diff before after
$ rm before after
Removing directory does not create an revlog entry
$ hg rm dir1/dir1
removing dir1/dir1/a
removing dir1/dir1/b
$ hg debugindex --dir dir1/dir1 > before
$ hg ci -qm 'remove dir1/dir1'
$ hg debugindex --dir dir1/dir1 > after
$ diff before after
$ rm before after
Check that hg files (calls treemanifest.walk()) works
without loading all directory revlogs
$ hg co 'desc("add dir2")'
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ mv .hg/store/meta/dir2 .hg/store/meta/dir2-backup
$ hg files -r . dir1
dir1/a
dir1/b
dir1/dir1/a
dir1/dir1/b
dir1/dir2/a
dir1/dir2/b
Check that status between revisions works (calls treemanifest.matches())
without loading all directory revlogs
$ hg status --rev 'desc("add dir1")' --rev . dir1
A dir1/dir1/a
A dir1/dir1/b
A dir1/dir2/a
A dir1/dir2/b
$ mv .hg/store/meta/dir2-backup .hg/store/meta/dir2
Merge creates 2-parent revision of directory revlog
$ echo 5 > dir1/a
$ hg ci -Aqm 'modify dir1/a'
$ hg co '.^'
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo 6 > dir1/b
$ hg ci -Aqm 'modify dir1/b'
$ hg merge 'desc("modify dir1/a")'
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg ci -m 'conflict-free merge involving dir1/'
$ cat dir1/a
5
$ cat dir1/b
6
$ hg debugindex --dir dir1
rev linkrev nodeid p1 p2
0 1 8b3ffd73f901 000000000000 000000000000
1 2 68e9d057c5a8 8b3ffd73f901 000000000000
2 4 4698198d2624 68e9d057c5a8 000000000000
3 5 44844058ccce 68e9d057c5a8 000000000000
4 6 bf3d9b744927 68e9d057c5a8 000000000000
5 7 dde7c0af2a03 bf3d9b744927 44844058ccce
Merge keeping directory from parent 1 does not create revlog entry. (Note that
dir1's manifest does change, but only because dir1/a's filelog changes.)
$ hg co 'desc("add dir2")'
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo 8 > dir2/a
$ hg ci -m 'modify dir2/a'
created new head
$ hg debugindex --dir dir2 > before
$ hg merge 'desc("modify dir1/a")'
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg revert -r 'desc("modify dir2/a")' .
reverting dir1/a
$ hg ci -m 'merge, keeping parent 1'
$ hg debugindex --dir dir2 > after
$ diff before after
$ rm before after
Merge keeping directory from parent 2 does not create revlog entry. (Note that
dir2's manifest does change, but only because dir2/a's filelog changes.)
$ hg co 'desc("modify dir2/a")'
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg debugindex --dir dir1 > before
$ hg merge 'desc("modify dir1/a")'
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg revert -r 'desc("modify dir1/a")' .
reverting dir2/a
$ hg ci -m 'merge, keeping parent 2'
created new head
$ hg debugindex --dir dir1 > after
$ diff before after
$ rm before after
Create flat source repo for tests with mixed flat/tree manifests
$ cd ..
$ hg init repo-flat
$ cd repo-flat
Create a few commits with flat manifest
$ echo 0 > a
$ echo 0 > b
$ echo 0 > e
$ for d in dir1 dir1/dir1 dir1/dir2 dir2
> do
> mkdir $d
> echo 0 > $d/a
> echo 0 > $d/b
> done
$ hg ci -Aqm initial
$ echo 1 > a
$ echo 1 > dir1/a
$ echo 1 > dir1/dir1/a
$ hg ci -Aqm 'modify on branch 1'
$ hg co 0
3 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo 2 > b
$ echo 2 > dir1/b
$ echo 2 > dir1/dir1/b
$ hg ci -Aqm 'modify on branch 2'
$ hg merge 1
3 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg ci -m 'merge of flat manifests to new flat manifest'
$ hg serve -p $HGPORT -d --pid-file=hg.pid --errorlog=errors.log
$ cat hg.pid >> $DAEMON_PIDS
Create clone with tree manifests enabled
$ cd ..
$ hg clone --config experimental.treemanifest=1 \
> http://localhost:$HGPORT repo-mixed -r 1
adding changesets
adding manifests
adding file changes
added 2 changesets with 14 changes to 11 files
new changesets 5b02a3e8db7e:581ef6037d8b
updating to branch default
11 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd repo-mixed
$ test -d .hg/store/meta
[1]
$ grep treemanifest .hg/requires
treemanifest
Should be possible to push updates from flat to tree manifest repo
$ hg -R ../repo-flat push ssh://user@dummy/repo-mixed
pushing to ssh://user@dummy/repo-mixed
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 2 changesets with 3 changes to 3 files
Commit should store revlog per directory
$ hg co 1
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo 3 > a
$ echo 3 > dir1/a
$ echo 3 > dir1/dir1/a
$ hg ci -m 'first tree'
created new head
$ find .hg/store/meta | sort
.hg/store/meta
.hg/store/meta/dir1
.hg/store/meta/dir1/00manifest.i
.hg/store/meta/dir1/dir1
.hg/store/meta/dir1/dir1/00manifest.i
.hg/store/meta/dir1/dir2
.hg/store/meta/dir1/dir2/00manifest.i
.hg/store/meta/dir2
.hg/store/meta/dir2/00manifest.i
Merge of two trees
$ hg co 2
6 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg merge 1
3 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg ci -m 'merge of flat manifests to new tree manifest'
created new head
$ hg diff -r 3
Parent of tree root manifest should be flat manifest, and two for merge
$ hg debugindex -m
rev linkrev nodeid p1 p2
0 0 40536115ed9e 000000000000 000000000000
1 1 f3376063c255 40536115ed9e 000000000000
2 2 5d9b9da231a2 40536115ed9e 000000000000
3 3 d17d663cbd8a 5d9b9da231a2 f3376063c255
4 4 51e32a8c60ee f3376063c255 000000000000
5 5 cc5baa78b230 5d9b9da231a2 f3376063c255
Status across flat/tree boundary should work
$ hg status --rev '.^' --rev .
M a
M dir1/a
M dir1/dir1/a
Turning off treemanifest config has no effect
$ hg debugindex --dir dir1
rev linkrev nodeid p1 p2
0 4 064927a0648a 000000000000 000000000000
1 5 25ecb8cb8618 000000000000 000000000000
$ echo 2 > dir1/a
$ hg --config experimental.treemanifest=False ci -qm 'modify dir1/a'
$ hg debugindex --dir dir1
rev linkrev nodeid p1 p2
0 4 064927a0648a 000000000000 000000000000
1 5 25ecb8cb8618 000000000000 000000000000
2 6 5b16163a30c6 25ecb8cb8618 000000000000
Stripping and recovering changes should work
$ hg st --change tip
M dir1/a
$ hg --config extensions.strip= strip tip
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
saved backup bundle to $TESTTMP/repo-mixed/.hg/strip-backup/51cfd7b1e13b-78a2f3ed-backup.hg
$ hg debugindex --dir dir1
rev linkrev nodeid p1 p2
0 4 064927a0648a 000000000000 000000000000
1 5 25ecb8cb8618 000000000000 000000000000
#if repobundlerepo
$ hg incoming .hg/strip-backup/*
comparing with .hg/strip-backup/*-backup.hg (glob)
searching for changes
changeset: 6:51cfd7b1e13b
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: modify dir1/a
#endif
$ hg unbundle .hg/strip-backup/*
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets 51cfd7b1e13b (1 drafts)
(run 'hg update' to get a working copy)
$ hg --config extensions.strip= strip tip
saved backup bundle to $TESTTMP/repo-mixed/.hg/strip-backup/*-backup.hg (glob)
$ hg unbundle -q .hg/strip-backup/*
$ hg debugindex --dir dir1
rev linkrev nodeid p1 p2
0 4 064927a0648a 000000000000 000000000000
1 5 25ecb8cb8618 000000000000 000000000000
2 6 5b16163a30c6 25ecb8cb8618 000000000000
$ hg st --change tip
M dir1/a
Shelving and unshelving should work
$ echo foo >> dir1/a
$ hg --config extensions.shelve= shelve
shelved as default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg --config extensions.shelve= unshelve
unshelving change 'default'
$ hg diff --nodates
diff -r 708a273da119 dir1/a
--- a/dir1/a
+++ b/dir1/a
@@ -1,1 +1,2 @@
1
+foo
Pushing from treemanifest repo to an empty repo makes that a treemanifest repo
$ cd ..
$ hg init empty-repo
$ cat << EOF >> empty-repo/.hg/hgrc
> [experimental]
> changegroup3=yes
> EOF
$ grep treemanifest empty-repo/.hg/requires
[1]
$ hg push -R repo -r 0 empty-repo
pushing to empty-repo
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 2 changes to 2 files
$ grep treemanifest empty-repo/.hg/requires
treemanifest
Pushing to an empty repo works
$ hg --config experimental.treemanifest=1 init clone
$ grep treemanifest clone/.hg/requires
treemanifest
$ hg push -R repo clone
pushing to clone
searching for changes
adding changesets
adding manifests
adding file changes
added 11 changesets with 15 changes to 10 files (+3 heads)
$ grep treemanifest clone/.hg/requires
treemanifest
$ hg -R clone verify
checking changesets
checking manifests
checking directory manifests
crosschecking files in changesets and manifests
checking files
checked 11 changesets with 15 changes to 10 files
Create deeper repo with tree manifests.
$ hg --config experimental.treemanifest=True init deeprepo
$ cd deeprepo
$ mkdir .A
$ mkdir b
$ mkdir b/bar
$ mkdir b/bar/orange
$ mkdir b/bar/orange/fly
$ mkdir b/foo
$ mkdir b/foo/apple
$ mkdir b/foo/apple/bees
$ touch .A/one.txt
$ touch .A/two.txt
$ touch b/bar/fruits.txt
$ touch b/bar/orange/fly/gnat.py
$ touch b/bar/orange/fly/housefly.txt
$ touch b/foo/apple/bees/flower.py
$ touch c.txt
$ touch d.py
$ hg ci -Aqm 'initial'
$ echo >> .A/one.txt
$ echo >> .A/two.txt
$ echo >> b/bar/fruits.txt
$ echo >> b/bar/orange/fly/gnat.py
$ echo >> b/bar/orange/fly/housefly.txt
$ echo >> b/foo/apple/bees/flower.py
$ echo >> c.txt
$ echo >> d.py
$ hg ci -Aqm 'second'
We'll see that visitdir works by removing some treemanifest revlogs and running
the files command with various parameters.
Test files from the root.
$ hg files -r .
.A/one.txt
.A/two.txt
b/bar/fruits.txt
b/bar/orange/fly/gnat.py
b/bar/orange/fly/housefly.txt
b/foo/apple/bees/flower.py
c.txt
d.py
Excludes with a glob should not exclude everything from the glob's root
$ hg files -r . -X 'b/fo?' b
b/bar/fruits.txt
b/bar/orange/fly/gnat.py
b/bar/orange/fly/housefly.txt
$ cp -R .hg/store .hg/store-copy
Test files for a subdirectory.
#if reporevlogstore
$ rm -r .hg/store/meta/~2e_a
#endif
#if reposimplestore
$ rm -r .hg/store/meta/._a
#endif
$ hg files -r . b
b/bar/fruits.txt
b/bar/orange/fly/gnat.py
b/bar/orange/fly/housefly.txt
b/foo/apple/bees/flower.py
$ hg diff -r '.^' -r . --stat b
b/bar/fruits.txt | 1 +
b/bar/orange/fly/gnat.py | 1 +
b/bar/orange/fly/housefly.txt | 1 +
b/foo/apple/bees/flower.py | 1 +
4 files changed, 4 insertions(+), 0 deletions(-)
$ cp -R .hg/store-copy/. .hg/store
Test files with just includes and excludes.
#if reporevlogstore
$ rm -r .hg/store/meta/~2e_a
#endif
#if reposimplestore
$ rm -r .hg/store/meta/._a
#endif
$ rm -r .hg/store/meta/b/bar/orange/fly
$ rm -r .hg/store/meta/b/foo/apple/bees
$ hg files -r . -I path:b/bar -X path:b/bar/orange/fly -I path:b/foo -X path:b/foo/apple/bees
b/bar/fruits.txt
$ hg diff -r '.^' -r . --stat -I path:b/bar -X path:b/bar/orange/fly -I path:b/foo -X path:b/foo/apple/bees
b/bar/fruits.txt | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
$ cp -R .hg/store-copy/. .hg/store
Test files for a subdirectory, excluding a directory within it.
#if reporevlogstore
$ rm -r .hg/store/meta/~2e_a
#endif
#if reposimplestore
$ rm -r .hg/store/meta/._a
#endif
$ rm -r .hg/store/meta/b/foo
$ hg files -r . -X path:b/foo b
b/bar/fruits.txt
b/bar/orange/fly/gnat.py
b/bar/orange/fly/housefly.txt
$ hg diff -r '.^' -r . --stat -X path:b/foo b
b/bar/fruits.txt | 1 +
b/bar/orange/fly/gnat.py | 1 +
b/bar/orange/fly/housefly.txt | 1 +
3 files changed, 3 insertions(+), 0 deletions(-)
$ cp -R .hg/store-copy/. .hg/store
Test files for a sub directory, including only a directory within it, and
including an unrelated directory.
#if reporevlogstore
$ rm -r .hg/store/meta/~2e_a
#endif
#if reposimplestore
$ rm -r .hg/store/meta/._a
#endif
$ rm -r .hg/store/meta/b/foo
$ hg files -r . -I path:b/bar/orange -I path:a b
b/bar/orange/fly/gnat.py
b/bar/orange/fly/housefly.txt
$ hg diff -r '.^' -r . --stat -I path:b/bar/orange -I path:a b
b/bar/orange/fly/gnat.py | 1 +
b/bar/orange/fly/housefly.txt | 1 +
2 files changed, 2 insertions(+), 0 deletions(-)
$ cp -R .hg/store-copy/. .hg/store
Test files for a pattern, including a directory, and excluding a directory
within that.
#if reporevlogstore
$ rm -r .hg/store/meta/~2e_a
#endif
#if reposimplestore
$ rm -r .hg/store/meta/._a
#endif
$ rm -r .hg/store/meta/b/foo
$ rm -r .hg/store/meta/b/bar/orange
$ hg files -r . glob:**.txt -I path:b/bar -X path:b/bar/orange
b/bar/fruits.txt
$ hg diff -r '.^' -r . --stat glob:**.txt -I path:b/bar -X path:b/bar/orange
b/bar/fruits.txt | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
$ cp -R .hg/store-copy/. .hg/store
Add some more changes to the deep repo
$ echo narf >> b/bar/fruits.txt
$ hg ci -m narf
$ echo troz >> b/bar/orange/fly/gnat.py
$ hg ci -m troz
Verify works
$ hg verify
checking changesets
checking manifests
checking directory manifests
crosschecking files in changesets and manifests
checking files
checked 4 changesets with 18 changes to 8 files
#if repofncache
Dirlogs are included in fncache
$ grep meta/.A/00manifest.i .hg/store/fncache
meta/.A/00manifest.i
Rebuilt fncache includes dirlogs
$ rm .hg/store/fncache
$ hg debugrebuildfncache
adding data/.A/one.txt.i
adding data/.A/two.txt.i
adding data/b/bar/fruits.txt.i
adding data/b/bar/orange/fly/gnat.py.i
adding data/b/bar/orange/fly/housefly.txt.i
adding data/b/foo/apple/bees/flower.py.i
adding data/c.txt.i
adding data/d.py.i
adding meta/.A/00manifest.i
adding meta/b/00manifest.i
adding meta/b/bar/00manifest.i
adding meta/b/bar/orange/00manifest.i
adding meta/b/bar/orange/fly/00manifest.i
adding meta/b/foo/00manifest.i
adding meta/b/foo/apple/00manifest.i
adding meta/b/foo/apple/bees/00manifest.i
16 items added, 0 removed from fncache
#endif
Finish first server
$ killdaemons.py
Back up the recently added revlogs
$ cp -R .hg/store .hg/store-newcopy
Verify reports missing dirlog
$ rm .hg/store/meta/b/00manifest.*
$ hg verify
checking changesets
checking manifests
checking directory manifests
0: empty or missing b/
b/@0: parent-directory manifest refers to unknown revision 67688a370455
b/@1: parent-directory manifest refers to unknown revision f065da70369e
b/@2: parent-directory manifest refers to unknown revision ac0d30948e0b
b/@3: parent-directory manifest refers to unknown revision 367152e6af28
warning: orphan data file 'meta/b/bar/00manifest.i' (reporevlogstore !)
warning: orphan data file 'meta/b/bar/orange/00manifest.i' (reporevlogstore !)
warning: orphan data file 'meta/b/bar/orange/fly/00manifest.i' (reporevlogstore !)
warning: orphan data file 'meta/b/foo/00manifest.i' (reporevlogstore !)
warning: orphan data file 'meta/b/foo/apple/00manifest.i' (reporevlogstore !)
warning: orphan data file 'meta/b/foo/apple/bees/00manifest.i' (reporevlogstore !)
crosschecking files in changesets and manifests
b/bar/fruits.txt@0: in changeset but not in manifest
b/bar/orange/fly/gnat.py@0: in changeset but not in manifest
b/bar/orange/fly/housefly.txt@0: in changeset but not in manifest
b/foo/apple/bees/flower.py@0: in changeset but not in manifest
checking files
checked 4 changesets with 18 changes to 8 files
6 warnings encountered! (reporevlogstore !)
9 integrity errors encountered!
(first damaged changeset appears to be 0)
[1]
$ cp -R .hg/store-newcopy/. .hg/store
Verify reports missing dirlog entry
$ mv -f .hg/store-copy/meta/b/00manifest.* .hg/store/meta/b/
$ hg verify
checking changesets
checking manifests
checking directory manifests
b/@2: parent-directory manifest refers to unknown revision ac0d30948e0b
b/@3: parent-directory manifest refers to unknown revision 367152e6af28
b/bar/@?: rev 2 points to unexpected changeset 2
b/bar/@?: 44d7e1146e0d not in parent-directory manifest
b/bar/@?: rev 3 points to unexpected changeset 3
b/bar/@?: 70b10c6b17b7 not in parent-directory manifest
b/bar/orange/@?: rev 2 points to unexpected changeset 3
(expected None)
b/bar/orange/fly/@?: rev 2 points to unexpected changeset 3
(expected None)
crosschecking files in changesets and manifests
checking files
checked 4 changesets with 18 changes to 8 files
2 warnings encountered!
8 integrity errors encountered!
(first damaged changeset appears to be 2)
[1]
$ cp -R .hg/store-newcopy/. .hg/store
Test cloning a treemanifest repo over http.
$ hg serve -p $HGPORT -d --pid-file=hg.pid --errorlog=errors.log
$ cat hg.pid >> $DAEMON_PIDS
$ cd ..
We can clone even with the knob turned off and we'll get a treemanifest repo.
$ hg clone --config experimental.treemanifest=False \
> --config experimental.changegroup3=True \
> http://localhost:$HGPORT deepclone
requesting all changes
adding changesets
adding manifests
adding file changes
added 4 changesets with 18 changes to 8 files
new changesets 775704be6f52:523e5c631710
updating to branch default
8 files updated, 0 files merged, 0 files removed, 0 files unresolved
No server errors.
$ cat deeprepo/errors.log
requires got updated to include treemanifest
$ cat deepclone/.hg/requires | grep treemanifest
treemanifest
Tree manifest revlogs exist.
$ find deepclone/.hg/store/meta | sort
deepclone/.hg/store/meta
deepclone/.hg/store/meta/._a (reposimplestore !)
deepclone/.hg/store/meta/._a/00manifest.i (reposimplestore !)
deepclone/.hg/store/meta/b
deepclone/.hg/store/meta/b/00manifest.i
deepclone/.hg/store/meta/b/bar
deepclone/.hg/store/meta/b/bar/00manifest.i
deepclone/.hg/store/meta/b/bar/orange
deepclone/.hg/store/meta/b/bar/orange/00manifest.i
deepclone/.hg/store/meta/b/bar/orange/fly
deepclone/.hg/store/meta/b/bar/orange/fly/00manifest.i
deepclone/.hg/store/meta/b/foo
deepclone/.hg/store/meta/b/foo/00manifest.i
deepclone/.hg/store/meta/b/foo/apple
deepclone/.hg/store/meta/b/foo/apple/00manifest.i
deepclone/.hg/store/meta/b/foo/apple/bees
deepclone/.hg/store/meta/b/foo/apple/bees/00manifest.i
deepclone/.hg/store/meta/~2e_a (reporevlogstore !)
deepclone/.hg/store/meta/~2e_a/00manifest.i (reporevlogstore !)
Verify passes.
$ cd deepclone
$ hg verify
checking changesets
checking manifests
checking directory manifests
crosschecking files in changesets and manifests
checking files
checked 4 changesets with 18 changes to 8 files
$ cd ..
#if reporevlogstore
Create clones using old repo formats to use in later tests
$ hg clone --config format.usestore=False \
> --config experimental.changegroup3=True \
> http://localhost:$HGPORT deeprepo-basicstore
requesting all changes
adding changesets
adding manifests
adding file changes
added 4 changesets with 18 changes to 8 files
new changesets 775704be6f52:523e5c631710
updating to branch default
8 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd deeprepo-basicstore
$ grep store .hg/requires
[1]
$ hg serve -p $HGPORT1 -d --pid-file=hg.pid --errorlog=errors.log
$ cat hg.pid >> $DAEMON_PIDS
$ cd ..
$ hg clone --config format.usefncache=False \
> --config experimental.changegroup3=True \
> http://localhost:$HGPORT deeprepo-encodedstore
requesting all changes
adding changesets
adding manifests
adding file changes
added 4 changesets with 18 changes to 8 files
new changesets 775704be6f52:523e5c631710
updating to branch default
8 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd deeprepo-encodedstore
$ grep fncache .hg/requires
[1]
$ hg serve -p $HGPORT2 -d --pid-file=hg.pid --errorlog=errors.log
$ cat hg.pid >> $DAEMON_PIDS
$ cd ..
Local clone with basicstore
$ hg clone -U deeprepo-basicstore local-clone-basicstore
$ hg -R local-clone-basicstore verify
checking changesets
checking manifests
checking directory manifests
crosschecking files in changesets and manifests
checking files
checked 4 changesets with 18 changes to 8 files
Local clone with encodedstore
$ hg clone -U deeprepo-encodedstore local-clone-encodedstore
$ hg -R local-clone-encodedstore verify
checking changesets
checking manifests
checking directory manifests
crosschecking files in changesets and manifests
checking files
checked 4 changesets with 18 changes to 8 files
Local clone with fncachestore
$ hg clone -U deeprepo local-clone-fncachestore
$ hg -R local-clone-fncachestore verify
checking changesets
checking manifests
checking directory manifests
crosschecking files in changesets and manifests
checking files
checked 4 changesets with 18 changes to 8 files
Stream clone with basicstore
$ hg clone --config experimental.changegroup3=True --stream -U \
> http://localhost:$HGPORT1 stream-clone-basicstore
streaming all changes
21 files to transfer, * of data (glob)
transferred * in * seconds (*) (glob)
$ hg -R stream-clone-basicstore verify
checking changesets
checking manifests
checking directory manifests
crosschecking files in changesets and manifests
checking files
checked 4 changesets with 18 changes to 8 files
Stream clone with encodedstore
$ hg clone --config experimental.changegroup3=True --stream -U \
> http://localhost:$HGPORT2 stream-clone-encodedstore
streaming all changes
21 files to transfer, * of data (glob)
transferred * in * seconds (*) (glob)
$ hg -R stream-clone-encodedstore verify
checking changesets
checking manifests
checking directory manifests
crosschecking files in changesets and manifests
checking files
checked 4 changesets with 18 changes to 8 files
Stream clone with fncachestore
$ hg clone --config experimental.changegroup3=True --stream -U \
> http://localhost:$HGPORT stream-clone-fncachestore
streaming all changes
22 files to transfer, * of data (glob)
transferred * in * seconds (*) (glob)
$ hg -R stream-clone-fncachestore verify
checking changesets
checking manifests
checking directory manifests
crosschecking files in changesets and manifests
checking files
checked 4 changesets with 18 changes to 8 files
Packed bundle
$ hg -R deeprepo debugcreatestreamclonebundle repo-packed.hg
writing 5330 bytes for 18 files
bundle requirements: generaldelta, revlogv1, sparserevlog, treemanifest
$ hg debugbundle --spec repo-packed.hg
none-packed1;requirements%3Dgeneraldelta%2Crevlogv1%2Csparserevlog%2Ctreemanifest
#endif
Bundle with changegroup2 is not supported
$ hg -R deeprepo bundle --all -t v2 deeprepo.bundle
abort: repository does not support bundle version 02
[255]
Pull does not include changegroup for manifest the client already has from
other branch
$ mkdir grafted-dir-repo
$ cd grafted-dir-repo
$ hg --config experimental.treemanifest=1 init
$ mkdir dir
$ echo a > dir/file
$ echo a > file
$ hg ci -Am initial
adding dir/file
adding file
$ echo b > dir/file
$ hg ci -m updated
$ hg co '.^'
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg revert -r tip dir/
reverting dir/file
$ echo b > file # to make sure root manifest is sent
$ hg ci -m grafted
created new head
$ cd ..
$ hg --config experimental.treemanifest=1 clone --pull -r 1 \
> grafted-dir-repo grafted-dir-repo-clone
adding changesets
adding manifests
adding file changes
added 2 changesets with 3 changes to 2 files
new changesets d84f4c419457:09ab742f3b0f
updating to branch default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd grafted-dir-repo-clone
$ hg pull -r 2
pulling from $TESTTMP/grafted-dir-repo
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
new changesets 73699489fb7c
(run 'hg heads' to see heads, 'hg merge' to merge)
Committing a empty commit does not duplicate root treemanifest
$ echo z >> z
$ hg commit -Aqm 'pre-empty commit'
$ hg rm z
$ hg commit --amend -m 'empty commit'
saved backup bundle to $TESTTMP/grafted-dir-repo-clone/.hg/strip-backup/cb99d5717cea-9e3b6b02-amend.hg
$ hg log -r 'tip + tip^' -T '{manifest}\n'
1:678d3574b88c
1:678d3574b88c
$ hg --config extensions.strip= strip -r . -q