changelog: specify checkambig=True to revlog.__init__, to avoid ambiguity
If steps below occurs at "the same time in sec", all of mtime, ctime
and size are same between (1) and (3).
1. append data to 00changelog.i (and close transaction)
2. discard appended data by truncation (strip or rollback)
3. append same size but different data to 00changelog.i again
Therefore, cache validation doesn't work after (3) as expected.
To avoid such file stat ambiguity around truncation, this patch
specifies checkambig=True to revlog.__init__(). This makes revlog
write changes out with checkambig=True.
Even though changes of 00changelog.i themselves are written out at
changelog._finalize(), this checkambig=True is needed, because
revlog.checkinlinesize(), which is invoked at the end of
changelog._finalize(), might replace already changed 00changelog.i by
converted one.
Even after this patch, avoiding file stat ambiguity of 00changelog.i
around truncation isn't yet completed, because truncation side isn't
aware of this issue.
This is a part of ExactCacheValidationPlan.
https://www.mercurial-scm.org/wiki/ExactCacheValidationPlan
$ hg init test
$ cd test
$ echo 0 >> afile
$ hg add afile
$ hg commit -m "0.0"
$ echo 1 >> afile
$ hg commit -m "0.1"
$ echo 2 >> afile
$ hg commit -m "0.2"
$ echo 3 >> afile
$ hg commit -m "0.3"
$ hg update -C 0
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo 1 >> afile
$ hg commit -m "1.1"
created new head
$ echo 2 >> afile
$ hg commit -m "1.2"
$ echo a line > fred
$ echo 3 >> afile
$ hg add fred
$ hg commit -m "1.3"
$ hg mv afile adifferentfile
$ hg commit -m "1.3m"
$ hg update -C 3
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
$ hg mv afile anotherfile
$ hg commit -m "0.3m"
$ hg debugindex -f 1 afile
rev flag offset length size ..... link p1 p2 nodeid (re)
0 0000 0 3 2 ..... 0 -1 -1 362fef284ce2 (re)
1 0000 3 5 4 ..... 1 0 -1 125144f7e028 (re)
2 0000 8 7 6 ..... 2 1 -1 4c982badb186 (re)
3 0000 15 9 8 ..... 3 2 -1 19b1fc555737 (re)
$ hg debugindex adifferentfile
rev offset length ..... linkrev nodeid p1 p2 (re)
0 0 75 ..... 7 2565f3199a74 000000000000 000000000000 (re)
$ hg debugindex anotherfile
rev offset length ..... linkrev nodeid p1 p2 (re)
0 0 75 ..... 8 2565f3199a74 000000000000 000000000000 (re)
$ hg debugindex fred
rev offset length ..... linkrev nodeid p1 p2 (re)
0 0 8 ..... 6 12ab3bcc5ea4 000000000000 000000000000 (re)
$ hg debugindex --manifest
rev offset length ..... linkrev nodeid p1 p2 (re)
0 0 48 ..... 0 43eadb1d2d06 000000000000 000000000000 (re)
1 48 48 ..... 1 8b89697eba2c 43eadb1d2d06 000000000000 (re)
2 96 48 ..... 2 626a32663c2f 8b89697eba2c 000000000000 (re)
3 144 48 ..... 3 f54c32f13478 626a32663c2f 000000000000 (re)
4 192 .. ..... 6 de68e904d169 626a32663c2f 000000000000 (re)
5 2.. .. ..... 7 09bb521d218d de68e904d169 000000000000 (re)
6 3.. 54 ..... 8 1fde233dfb0f f54c32f13478 000000000000 (re)
$ hg verify
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
4 files, 9 changesets, 7 total revisions
$ cd ..
$ for i in 0 1 2 3 4 5 6 7 8; do
> echo
> echo ---- hg clone -r "$i" test test-"$i"
> hg clone -r "$i" test test-"$i"
> cd test-"$i"
> hg verify
> cd ..
> done
---- hg clone -r 0 test test-0
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
1 files, 1 changesets, 1 total revisions
---- hg clone -r 1 test test-1
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 1 files
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
1 files, 2 changesets, 2 total revisions
---- hg clone -r 2 test test-2
adding changesets
adding manifests
adding file changes
added 3 changesets with 3 changes to 1 files
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
1 files, 3 changesets, 3 total revisions
---- hg clone -r 3 test test-3
adding changesets
adding manifests
adding file changes
added 4 changesets with 4 changes to 1 files
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
1 files, 4 changesets, 4 total revisions
---- hg clone -r 4 test test-4
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 1 files
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
1 files, 2 changesets, 2 total revisions
---- hg clone -r 5 test test-5
adding changesets
adding manifests
adding file changes
added 3 changesets with 3 changes to 1 files
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
1 files, 3 changesets, 3 total revisions
---- hg clone -r 6 test test-6
adding changesets
adding manifests
adding file changes
added 4 changesets with 5 changes to 2 files
updating to branch default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
2 files, 4 changesets, 5 total revisions
---- hg clone -r 7 test test-7
adding changesets
adding manifests
adding file changes
added 5 changesets with 6 changes to 3 files
updating to branch default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
3 files, 5 changesets, 6 total revisions
---- hg clone -r 8 test test-8
adding changesets
adding manifests
adding file changes
added 5 changesets with 5 changes to 2 files
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
2 files, 5 changesets, 5 total revisions
$ cd test-8
$ hg pull ../test-7
pulling from ../test-7
searching for changes
adding changesets
adding manifests
adding file changes
added 4 changesets with 2 changes to 3 files (+1 heads)
(run 'hg heads' to see heads, 'hg merge' to merge)
$ hg verify
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
4 files, 9 changesets, 7 total revisions
$ cd ..
$ hg clone test test-9
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd test-9
$ hg branch foobar
marked working directory as branch foobar
(branches are permanent and global, did you want a bookmark?)
$ echo file2 >> file2
$ hg add file2
$ hg commit -m "changeset9"
$ echo file3 >> file3
$ hg add file3
$ hg commit -m "changeset10"
$ cd ..
$ hg clone -r 9 -u foobar test-9 test-10
adding changesets
adding manifests
adding file changes
added 6 changesets with 6 changes to 3 files
updating to branch foobar
2 files updated, 0 files merged, 0 files removed, 0 files unresolved