changelog: specify checkambig=True to revlog.__init__, to avoid ambiguity
If steps below occurs at "the same time in sec", all of mtime, ctime
and size are same between (1) and (3).
1. append data to 00changelog.i (and close transaction)
2. discard appended data by truncation (strip or rollback)
3. append same size but different data to 00changelog.i again
Therefore, cache validation doesn't work after (3) as expected.
To avoid such file stat ambiguity around truncation, this patch
specifies checkambig=True to revlog.__init__(). This makes revlog
write changes out with checkambig=True.
Even though changes of 00changelog.i themselves are written out at
changelog._finalize(), this checkambig=True is needed, because
revlog.checkinlinesize(), which is invoked at the end of
changelog._finalize(), might replace already changed 00changelog.i by
converted one.
Even after this patch, avoiding file stat ambiguity of 00changelog.i
around truncation isn't yet completed, because truncation side isn't
aware of this issue.
This is a part of ExactCacheValidationPlan.
https://www.mercurial-scm.org/wiki/ExactCacheValidationPlan
$ remove() {
> hg rm $@
> echo "exit code: $?"
> hg st
> # do not use ls -R, which recurses in .hg subdirs on Mac OS X 10.5
> find . -name .hg -prune -o -type f -print | sort
> hg up -C
> }
$ cat >> $HGRCPATH <<EOF
> [progress]
> disable=False
> assume-tty = 1
> delay = 0
> # set changedelay really large so we don't see nested topics
> changedelay = 30000
> format = topic bar number
> refresh = 0
> width = 60
> EOF
$ hg init a
$ cd a
$ echo a > foo
file not managed
$ remove foo
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
not removing foo: file is untracked
exit code: 1
? foo
./foo
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg add foo
$ hg commit -m1
the table cases
00 state added, options none
$ echo b > bar
$ hg add bar
$ remove bar
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
skipping [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
not removing bar: file has been marked for add (use 'hg forget' to undo add)
exit code: 1
A bar
./bar
./foo
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
01 state clean, options none
$ remove foo
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
exit code: 0
R foo
? bar
./bar
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
02 state modified, options none
$ echo b >> foo
$ remove foo
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
skipping [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
not removing foo: file is modified (use -f to force removal)
exit code: 1
M foo
? bar
./bar
./foo
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
03 state missing, options none
$ rm foo
$ remove foo
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
exit code: 0
R foo
? bar
./bar
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
10 state added, options -f
$ echo b > bar
$ hg add bar
$ remove -f bar
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
exit code: 0
? bar
./bar
./foo
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm bar
11 state clean, options -f
$ remove -f foo
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
exit code: 0
R foo
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
12 state modified, options -f
$ echo b >> foo
$ remove -f foo
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
exit code: 0
R foo
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
13 state missing, options -f
$ rm foo
$ remove -f foo
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
exit code: 0
R foo
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
20 state added, options -A
$ echo b > bar
$ hg add bar
$ remove -A bar
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
skipping [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
not removing bar: file still exists
exit code: 1
A bar
./bar
./foo
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
21 state clean, options -A
$ remove -A foo
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
skipping [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
not removing foo: file still exists
exit code: 1
? bar
./bar
./foo
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
22 state modified, options -A
$ echo b >> foo
$ remove -A foo
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
skipping [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
not removing foo: file still exists
exit code: 1
M foo
? bar
./bar
./foo
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
23 state missing, options -A
$ rm foo
$ remove -A foo
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
exit code: 0
R foo
? bar
./bar
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
30 state added, options -Af
$ echo b > bar
$ hg add bar
$ remove -Af bar
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
exit code: 0
? bar
./bar
./foo
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm bar
31 state clean, options -Af
$ remove -Af foo
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
exit code: 0
R foo
./foo
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
32 state modified, options -Af
$ echo b >> foo
$ remove -Af foo
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
exit code: 0
R foo
./foo
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
33 state missing, options -Af
$ rm foo
$ remove -Af foo
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
exit code: 0
R foo
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
test some directory stuff
$ mkdir test
$ echo a > test/foo
$ echo b > test/bar
$ hg ci -Am2
adding test/bar
adding test/foo
dir, options none
$ rm test/bar
$ remove test
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
deleting [=====================> ] 1/2\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
deleting [===========================================>] 2/2\r (no-eol) (esc)
\r (no-eol) (esc)
removing test/bar (glob)
removing test/foo (glob)
exit code: 0
R test/bar
R test/foo
./foo
\r (no-eol) (esc)
updating [===========================================>] 2/2\r (no-eol) (esc)
\r (no-eol) (esc)
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
dir, options -f
$ rm test/bar
$ remove -f test
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
deleting [=====================> ] 1/2\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
deleting [===========================================>] 2/2\r (no-eol) (esc)
\r (no-eol) (esc)
removing test/bar (glob)
removing test/foo (glob)
exit code: 0
R test/bar
R test/foo
./foo
\r (no-eol) (esc)
updating [===========================================>] 2/2\r (no-eol) (esc)
\r (no-eol) (esc)
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
dir, options -A
$ rm test/bar
$ remove -A test
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
skipping [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
removing test/bar (glob)
not removing test/foo: file still exists (glob)
exit code: 1
R test/bar
./foo
./test/foo
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
dir, options -Af
$ rm test/bar
$ remove -Af test
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
deleting [=====================> ] 1/2\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
deleting [===========================================>] 2/2\r (no-eol) (esc)
\r (no-eol) (esc)
removing test/bar (glob)
removing test/foo (glob)
exit code: 0
R test/bar
R test/foo
./foo
./test/foo
\r (no-eol) (esc)
updating [===========================================>] 2/2\r (no-eol) (esc)
\r (no-eol) (esc)
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
test remove dropping empty trees (issue1861)
$ mkdir -p issue1861/b/c
$ echo x > issue1861/x
$ echo y > issue1861/b/c/y
$ hg ci -Am add
adding issue1861/b/c/y
adding issue1861/x
$ hg rm issue1861/b
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
removing issue1861/b/c/y (glob)
$ hg ci -m remove
$ ls issue1861
x
test that commit does not crash if the user removes a newly added file
$ touch f1
$ hg add f1
$ rm f1
$ hg ci -A -mx
removing f1
nothing changed
[1]
handling of untracked directories and missing files
$ mkdir d1
$ echo a > d1/a
$ hg rm --after d1
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
not removing d1: no tracked files
[1]
$ hg add d1/a
$ rm d1/a
$ hg rm --after d1
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
removing d1/a (glob)
$ hg rm --after nosuch
nosuch: * (glob)
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
[1]