view tests/test-merge-commit.t @ 30190:56b930238036 stable

largefiles: more safe handling of interruptions while updating modifications

Largefiles are fragile with the design where dirstate and lfdirstate must be
kept in sync.

To be less fragile, mark all clean largefiles as unsure ("normallookup") before
updating standins. After standins have been updated and we know exactly which
largefile standins actually was changed, mark the unchanged largefiles back to
clean ("normal").

This will make the failure mode more safe. If interrupted, the next command
will continue to perform extra hashing of all largefiles. That will do that all
largefiles that are out of sync with their standin will be marked dirty and
they will show up in status and can be cleaned with update --clean.

Check that renames are correctly saved by a commit after a merge

Test with the merge on 3 having the rename on the local parent

  $ hg init a
  $ cd a

  $ echo line1 > foo
  $ hg add foo
  $ hg ci -m '0: add foo'

  $ echo line2 >> foo
  $ hg ci -m '1: change foo'

  $ hg up -C 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg mv foo bar
  $ rm bar
  $ echo line0 > bar
  $ echo line1 >> bar
  $ hg ci -m '2: mv foo bar; change bar'
  created new head

  $ hg merge 1
  merging bar and foo to bar
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ cat bar
  line0
  line1
  line2

  $ hg ci -m '3: merge with local rename'

  $ hg debugindex bar
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0      77  .....       2 d35118874825 000000000000 000000000000 (re)
       1        77      76  .....       3 5345f5ab8abd 000000000000 d35118874825 (re)

  $ hg debugrename bar
  bar renamed from foo:9e25c27b87571a1edee5ae4dddee5687746cc8e2

  $ hg debugindex foo
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       7  .....       0 690b295714ae 000000000000 000000000000 (re)
       1         7      13  .....       1 9e25c27b8757 690b295714ae 000000000000 (re)


Revert the content change from rev 2:

  $ hg up -C 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm bar
  $ echo line1 > bar
  $ hg ci -m '4: revert content change from rev 2'
  created new head

  $ hg log --template '{rev}:{node|short} {parents}\n'
  4:2263c1be0967 2:0f2ff26688b9 
  3:0555950ead28 2:0f2ff26688b9 1:5cd961e4045d 
  2:0f2ff26688b9 0:2665aaee66e9 
  1:5cd961e4045d 
  0:2665aaee66e9 

This should use bar@rev2 as the ancestor:

  $ hg --debug merge 3
    searching for copies back to rev 1
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 0f2ff26688b9, local: 2263c1be0967+, remote: 0555950ead28
   preserving bar for resolve of bar
  starting 4 threads for background file closing (?)
   bar: versions differ -> m (premerge)
  picked tool ':merge' for bar (binary False symlink False changedelete False)
  merging bar
  my bar@2263c1be0967+ other bar@0555950ead28 ancestor bar@0f2ff26688b9
   premerge successful
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ cat bar
  line1
  line2

  $ hg ci -m '5: merge'

  $ hg debugindex bar
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0      77  .....       2 d35118874825 000000000000 000000000000 (re)
       1        77      76  .....       3 5345f5ab8abd 000000000000 d35118874825 (re)
       2       153       7  .....       4 ff4b45017382 d35118874825 000000000000 (re)
       3       160      13  .....       5 3701b4893544 ff4b45017382 5345f5ab8abd (re)


Same thing, but with the merge on 3 having the rename
on the remote parent:

  $ cd ..
  $ hg clone -U -r 1 -r 2 a b
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 2 files (+1 heads)
  $ cd b

  $ hg up -C 1
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg merge 2
  merging foo and bar to bar
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ cat bar
  line0
  line1
  line2

  $ hg ci -m '3: merge with remote rename'

  $ hg debugindex bar
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0      77  .....       2 d35118874825 000000000000 000000000000 (re)
       1        77      76  .....       3 5345f5ab8abd 000000000000 d35118874825 (re)

  $ hg debugrename bar
  bar renamed from foo:9e25c27b87571a1edee5ae4dddee5687746cc8e2

  $ hg debugindex foo
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       7  .....       0 690b295714ae 000000000000 000000000000 (re)
       1         7      13  .....       1 9e25c27b8757 690b295714ae 000000000000 (re)


Revert the content change from rev 2:

  $ hg up -C 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm bar
  $ echo line1 > bar
  $ hg ci -m '4: revert content change from rev 2'
  created new head

  $ hg log --template '{rev}:{node|short} {parents}\n'
  4:2263c1be0967 2:0f2ff26688b9 
  3:3ffa6b9e35f0 1:5cd961e4045d 2:0f2ff26688b9 
  2:0f2ff26688b9 0:2665aaee66e9 
  1:5cd961e4045d 
  0:2665aaee66e9 

This should use bar@rev2 as the ancestor:

  $ hg --debug merge 3
    searching for copies back to rev 1
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 0f2ff26688b9, local: 2263c1be0967+, remote: 3ffa6b9e35f0
   preserving bar for resolve of bar
  starting 4 threads for background file closing (?)
   bar: versions differ -> m (premerge)
  picked tool ':merge' for bar (binary False symlink False changedelete False)
  merging bar
  my bar@2263c1be0967+ other bar@3ffa6b9e35f0 ancestor bar@0f2ff26688b9
   premerge successful
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ cat bar
  line1
  line2

  $ hg ci -m '5: merge'

  $ hg debugindex bar
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0      77  .....       2 d35118874825 000000000000 000000000000 (re)
       1        77      76  .....       3 5345f5ab8abd 000000000000 d35118874825 (re)
       2       153       7  .....       4 ff4b45017382 d35118874825 000000000000 (re)
       3       160      13  .....       5 3701b4893544 ff4b45017382 5345f5ab8abd (re)

  $ cd ..