view tests/test-commit.t @ 42222:57203e0210f8

copies: calculate mergecopies() based on pathcopies()

When copies are stored in changesets, we need a changeset-centric
version of mergecopies() just like we have a changeset-centric version
of pathcopies(). I think the natural way of thinking about
mergecopies() is in terms of pathcopies() from the base to each of the
commits. So if we can rewrite mergecopies() based on two such
pathcopies() calls, we'll get the changeset-centric version for
free. That's what this patch does.

A nice bonus is that it ends up being a lot simpler. mergecopies() has
accumulated a lot of technical debt over time. One good example is the
code for dealing with grafts (the "partial/incomplete/dirty"
stuff). Since pathcopies() already deals with backwards renames and
ping-pong renames, we get that for free.

I've run tests with hard-coded debug logging for "fullcopy" and while
I haven't looked at every difference it produces, all the ones I have
looked at seemed reasonable to me. I'm a little surprised that no more
tests fail when run with '--extra-config-opt
experimental.copies.read-from=compatibility' compared to before this
patch. This patch also fixes the broken cases in test-annotate.t and
test-fastannotate.t. It also enables the part of test-copies.t that
was previously disabled exactly because mergecopies() needed to get a
changeset-centric version.

One drawback of the rewritten code is that we may now make
remotefilelog prefetch more files. We used to prefetch files that were
unique to either side of the merge compared to the other. We now
prefetch files that are unique to either side of the merge compared to
the base. This means that if you added the same file to each side, we
would not prefetch it before, but we would now. Such cases are
probably quite rare, but one likely scenario where they happen is when
moving from a commit to its successor (or the other way around). The
user will probably already have the files in the cache in such cases,
so it's probably not a big deal.

Some timings for calculating mergecopies between two revisions
(revisions shown on each line, all using the common ancestor as base):

In the hg repo:
4.8 4.9: 0.21s -> 0.21s
4.0 4.8: 0.35s -> 0.63s

In and old copy of the mozilla-unified repo:
FIREFOX_BETA_60_BASE^ FIREFOX_BETA_60_BASE: 0.82s -> 0.82s
FIREFOX_NIGHTLY_59_END FIREFOX_BETA_60_BASE: 2.5s -> 2.6s
FIREFOX_BETA_59_END FIREFOX_BETA_60_BASE: 3.9s -> 4.1s
FIREFOX_AURORA_50_BASE FIREFOX_BETA_60_BASE: 31s -> 33s

So it's measurably slower in most cases. The most significant
difference is in the hg repo between revisions 4.0 and 4.8. In that
case it seems to come from the fact that pathcopies() uses
fctx.isintroducedafter() (in _tracefile), while the old mergecopies()
used fctx.linkrev() (in _checkcopies()). That results in a single call
to filectx._adjustlinkrev(), which is responsible for the entire
difference in time (in my repo). So we pay a performance penalty but
we get more correct code (see change in
test-mv-cp-st-diff.t). Deleting the "== f.filenode()" in _tracefile()
recovers the lost performance in the hg repo.

There were are few other optimizations in _checkcopies() that I could
not measure any impact from. One was from the "seen" set. Another was
from a "continue" when the file was not in the destination manifest
(corresponding to "am" in _tracefile).

Also note that merge copies are not calculated when updating with a
clean working copy, which is probably the most common case. I
therefore think the much simpler code is worth the slowdown.

Differential Revision: https://phab.mercurial-scm.org/D6255

commit date test

  $ hg init test
  $ cd test
  $ echo foo > foo
  $ hg add foo
  $ cat > $TESTTMP/checkeditform.sh <<EOF
  > env | grep HGEDITFORM
  > true
  > EOF
  $ HGEDITOR="sh $TESTTMP/checkeditform.sh" hg commit -m ""
  HGEDITFORM=commit.normal.normal
  abort: empty commit message
  [255]
  $ hg commit -d '0 0' -m commit-1
  $ echo foo >> foo
  $ hg commit -d '1 4444444' -m commit-3
  hg: parse error: impossible time zone offset: 4444444
  [255]
  $ hg commit -d '1	15.1' -m commit-4
  hg: parse error: invalid date: '1\t15.1'
  [255]
  $ hg commit -d 'foo bar' -m commit-5
  hg: parse error: invalid date: 'foo bar'
  [255]
  $ hg commit -d ' 1 4444' -m commit-6
  $ hg commit -d '111111111111 0' -m commit-7
  hg: parse error: date exceeds 32 bits: 111111111111
  [255]
  $ hg commit -d '-111111111111 0' -m commit-7
  hg: parse error: date exceeds 32 bits: -111111111111
  [255]
  $ echo foo >> foo
  $ hg commit -d '1901-12-13 20:45:52 +0000' -m commit-7-2
  $ echo foo >> foo
  $ hg commit -d '-2147483648 0' -m commit-7-3
  $ hg log -T '{rev} {date|isodatesec}\n' -l2
  3 1901-12-13 20:45:52 +0000
  2 1901-12-13 20:45:52 +0000
  $ hg commit -d '1901-12-13 20:45:51 +0000' -m commit-7
  hg: parse error: date exceeds 32 bits: -2147483649
  [255]
  $ hg commit -d '-2147483649 0' -m commit-7
  hg: parse error: date exceeds 32 bits: -2147483649
  [255]

commit added file that has been deleted

  $ echo bar > bar
  $ hg add bar
  $ rm bar
  $ hg commit -m commit-8
  nothing changed (1 missing files, see 'hg status')
  [1]
  $ hg commit -m commit-8-2 bar
  abort: bar: file not found!
  [255]

  $ hg -q revert -a --no-backup

  $ mkdir dir
  $ echo boo > dir/file
  $ hg add
  adding dir/file
  $ hg -v commit -m commit-9 dir
  committing files:
  dir/file
  committing manifest
  committing changelog
  committed changeset 4:1957363f1ced

  $ echo > dir.file
  $ hg add
  adding dir.file
  $ hg commit -m commit-10 dir dir.file
  abort: dir: no match under directory!
  [255]

  $ echo >> dir/file
  $ mkdir bleh
  $ mkdir dir2
  $ cd bleh
  $ hg commit -m commit-11 .
  abort: bleh: no match under directory!
  [255]
  $ hg commit -m commit-12 ../dir ../dir2
  abort: dir2: no match under directory!
  [255]
  $ hg -v commit -m commit-13 ../dir
  committing files:
  dir/file
  committing manifest
  committing changelog
  committed changeset 5:a31d8f87544a
  $ cd ..

  $ hg commit -m commit-14 does-not-exist
  abort: does-not-exist: * (glob)
  [255]

#if symlink
  $ ln -s foo baz
  $ hg commit -m commit-15 baz
  abort: baz: file not tracked!
  [255]
  $ rm baz
#endif

  $ touch quux
  $ hg commit -m commit-16 quux
  abort: quux: file not tracked!
  [255]
  $ echo >> dir/file
  $ hg -v commit -m commit-17 dir/file
  committing files:
  dir/file
  committing manifest
  committing changelog
  committed changeset 6:32d054c9d085

An empty date was interpreted as epoch origin

  $ echo foo >> foo
  $ hg commit -d '' -m commit-no-date --config devel.default-date=
  $ hg tip --template '{date|isodate}\n' | grep '1970'
  [1]

Using the advanced --extra flag

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "commitextras=" >> $HGRCPATH
  $ hg status
  ? quux
  $ hg add quux
  $ hg commit -m "adding internal used extras" --extra amend_source=hash
  abort: key 'amend_source' is used internally, can't be set manually
  [255]
  $ hg commit -m "special chars in extra" --extra id@phab=214
  abort: keys can only contain ascii letters, digits, '_' and '-'
  [255]
  $ hg commit -m "empty key" --extra =value
  abort: unable to parse '=value', keys can't be empty
  [255]
  $ hg commit -m "adding extras" --extra sourcehash=foo --extra oldhash=bar
  $ hg log -r . -T '{extras % "{extra}\n"}'
  branch=default
  oldhash=bar
  sourcehash=foo

Failed commit with --addremove should not update dirstate

  $ echo foo > newfile
  $ hg status
  ? newfile
  $ HGEDITOR=false hg ci --addremove
  adding newfile
  abort: edit failed: false exited with status 1
  [255]
  $ hg status
  ? newfile

Make sure we do not obscure unknown requires file entries (issue2649)

  $ echo foo >> foo
  $ echo fake >> .hg/requires
  $ hg commit -m bla
  abort: repository requires features unknown to this Mercurial: fake!
  (see https://mercurial-scm.org/wiki/MissingRequirement for more information)
  [255]

  $ cd ..


partial subdir commit test

  $ hg init test2
  $ cd test2
  $ mkdir foo
  $ echo foo > foo/foo
  $ mkdir bar
  $ echo bar > bar/bar
  $ hg add
  adding bar/bar
  adding foo/foo
  $ HGEDITOR=cat hg ci -e -m commit-subdir-1 foo
  commit-subdir-1
  
  
  HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  HG: Leave message empty to abort commit.
  HG: --
  HG: user: test
  HG: branch 'default'
  HG: added foo/foo


  $ hg ci -m commit-subdir-2 bar

subdir log 1

  $ hg log -v foo
  changeset:   0:f97e73a25882
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       foo/foo
  description:
  commit-subdir-1
  
  

subdir log 2

  $ hg log -v bar
  changeset:   1:aa809156d50d
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       bar/bar
  description:
  commit-subdir-2
  
  

full log

  $ hg log -v
  changeset:   1:aa809156d50d
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       bar/bar
  description:
  commit-subdir-2
  
  
  changeset:   0:f97e73a25882
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       foo/foo
  description:
  commit-subdir-1
  
  
  $ cd ..


dot and subdir commit test

  $ hg init test3
  $ echo commit-foo-subdir > commit-log-test
  $ cd test3
  $ mkdir foo
  $ echo foo content > foo/plain-file
  $ hg add foo/plain-file
  $ HGEDITOR=cat hg ci --edit -l ../commit-log-test foo
  commit-foo-subdir
  
  
  HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  HG: Leave message empty to abort commit.
  HG: --
  HG: user: test
  HG: branch 'default'
  HG: added foo/plain-file


  $ echo modified foo content > foo/plain-file
  $ hg ci -m commit-foo-dot .

full log

  $ hg log -v
  changeset:   1:95b38e3a5b2e
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       foo/plain-file
  description:
  commit-foo-dot
  
  
  changeset:   0:65d4e9386227
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       foo/plain-file
  description:
  commit-foo-subdir
  
  

subdir log

  $ cd foo
  $ hg log .
  changeset:   1:95b38e3a5b2e
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     commit-foo-dot
  
  changeset:   0:65d4e9386227
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     commit-foo-subdir
  
  $ cd ..
  $ cd ..

Issue1049: Hg permits partial commit of merge without warning

  $ hg init issue1049
  $ cd issue1049
  $ echo a > a
  $ hg ci -Ama
  adding a
  $ echo a >> a
  $ hg ci -mb
  $ hg up 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b >> a
  $ hg ci -mc
  created new head
  $ HGMERGE=true hg merge
  merging a
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

should fail because we are specifying a file name

  $ hg ci -mmerge a
  abort: cannot partially commit a merge (do not specify files or patterns)
  [255]

should fail because we are specifying a pattern

  $ hg ci -mmerge -I a
  abort: cannot partially commit a merge (do not specify files or patterns)
  [255]

should succeed

  $ HGEDITOR="sh $TESTTMP/checkeditform.sh" hg ci -mmerge --edit
  HGEDITFORM=commit.normal.merge
  $ cd ..


test commit message content

  $ hg init commitmsg
  $ cd commitmsg
  $ echo changed > changed
  $ echo removed > removed
  $ hg book activebookmark
  $ hg ci -qAm init

  $ hg rm removed
  $ echo changed >> changed
  $ echo added > added
  $ hg add added
  $ HGEDITOR=cat hg ci -A
  
  
  HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  HG: Leave message empty to abort commit.
  HG: --
  HG: user: test
  HG: branch 'default'
  HG: bookmark 'activebookmark'
  HG: added added
  HG: changed changed
  HG: removed removed
  abort: empty commit message
  [255]

test saving last-message.txt

  $ hg init sub
  $ echo a > sub/a
  $ hg -R sub add sub/a
  $ cat > sub/.hg/hgrc <<EOF
  > [hooks]
  > precommit.test-saving-last-message = false
  > EOF

  $ echo 'sub = sub' > .hgsub
  $ hg add .hgsub

  $ cat > $TESTTMP/editor.sh <<EOF
  > echo "==== before editing:"
  > cat \$1
  > echo "===="
  > echo "test saving last-message.txt" >> \$1
  > EOF

  $ rm -f .hg/last-message.txt
  $ HGEDITOR="sh $TESTTMP/editor.sh" hg commit -S -q
  ==== before editing:
  
  
  HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  HG: Leave message empty to abort commit.
  HG: --
  HG: user: test
  HG: branch 'default'
  HG: bookmark 'activebookmark'
  HG: subrepo sub
  HG: added .hgsub
  HG: added added
  HG: changed .hgsubstate
  HG: changed changed
  HG: removed removed
  ====
  abort: precommit.test-saving-last-message hook exited with status 1 (in subrepository "sub")
  [255]
  $ cat .hg/last-message.txt
  
  
  test saving last-message.txt

test that '[committemplate] changeset' definition and commit log
specific template keywords work well

  $ cat >> .hg/hgrc <<EOF
  > [committemplate]
  > changeset.commit.normal = 'HG: this is "commit.normal" template
  >     HG: {extramsg}
  >     {if(activebookmark,
  >    "HG: bookmark '{activebookmark}' is activated\n",
  >    "HG: no bookmark is activated\n")}{subrepos %
  >    "HG: subrepo '{subrepo}' is changed\n"}'
  > 
  > changeset.commit = HG: this is "commit" template
  >     HG: {extramsg}
  >     {if(activebookmark,
  >    "HG: bookmark '{activebookmark}' is activated\n",
  >    "HG: no bookmark is activated\n")}{subrepos %
  >    "HG: subrepo '{subrepo}' is changed\n"}
  > 
  > changeset = HG: this is customized commit template
  >     HG: {extramsg}
  >     {if(activebookmark,
  >    "HG: bookmark '{activebookmark}' is activated\n",
  >    "HG: no bookmark is activated\n")}{subrepos %
  >    "HG: subrepo '{subrepo}' is changed\n"}
  > EOF

  $ hg init sub2
  $ echo a > sub2/a
  $ hg -R sub2 add sub2/a
  $ echo 'sub2 = sub2' >> .hgsub

  $ HGEDITOR=cat hg commit -S -q
  HG: this is "commit.normal" template
  HG: Leave message empty to abort commit.
  HG: bookmark 'activebookmark' is activated
  HG: subrepo 'sub' is changed
  HG: subrepo 'sub2' is changed
  abort: empty commit message
  [255]

  $ cat >> .hg/hgrc <<EOF
  > [committemplate]
  > changeset.commit.normal =
  > # now, "changeset.commit" should be chosen for "hg commit"
  > EOF

  $ hg bookmark --inactive activebookmark
  $ hg forget .hgsub
  $ HGEDITOR=cat hg commit -q
  HG: this is "commit" template
  HG: Leave message empty to abort commit.
  HG: no bookmark is activated
  abort: empty commit message
  [255]

  $ cat >> .hg/hgrc <<EOF
  > [committemplate]
  > changeset.commit =
  > # now, "changeset" should be chosen for "hg commit"
  > EOF

  $ HGEDITOR=cat hg commit -q
  HG: this is customized commit template
  HG: Leave message empty to abort commit.
  HG: no bookmark is activated
  abort: empty commit message
  [255]

  $ cat >> .hg/hgrc <<EOF
  > [committemplate]
  > changeset = {desc}
  >     HG: mods={file_mods}
  >     HG: adds={file_adds}
  >     HG: dels={file_dels}
  >     HG: files={files}
  >     HG:
  >     {splitlines(diff()) % 'HG: {line}\n'
  >    }HG:
  >     HG: mods={file_mods}
  >     HG: adds={file_adds}
  >     HG: dels={file_dels}
  >     HG: files={files}\n
  > EOF
  $ hg status -amr
  M changed
  A added
  R removed
  $ HGEDITOR=cat hg commit -q -e -m "foo bar" changed
  foo bar
  HG: mods=changed
  HG: adds=
  HG: dels=
  HG: files=changed
  HG:
  HG: diff -r d2313f97106f changed
  HG: --- a/changed	Thu Jan 01 00:00:00 1970 +0000
  HG: +++ b/changed	Thu Jan 01 00:00:00 1970 +0000
  HG: @@ -1,1 +1,2 @@
  HG:  changed
  HG: +changed
  HG:
  HG: mods=changed
  HG: adds=
  HG: dels=
  HG: files=changed
  $ hg status -amr
  A added
  R removed
  $ hg parents --template "M {file_mods}\nA {file_adds}\nR {file_dels}\n"
  M changed
  A 
  R 
  $ hg rollback -q

  $ cat >> .hg/hgrc <<EOF
  > [committemplate]
  > changeset = {desc}
  >     HG: mods={file_mods}
  >     HG: adds={file_adds}
  >     HG: dels={file_dels}
  >     HG: files={files}
  >     HG:
  >     {splitlines(diff("changed")) % 'HG: {line}\n'
  >    }HG:
  >     HG: mods={file_mods}
  >     HG: adds={file_adds}
  >     HG: dels={file_dels}
  >     HG: files={files}
  >     HG:
  >     {splitlines(diff("added")) % 'HG: {line}\n'
  >    }HG:
  >     HG: mods={file_mods}
  >     HG: adds={file_adds}
  >     HG: dels={file_dels}
  >     HG: files={files}
  >     HG:
  >     {splitlines(diff("removed")) % 'HG: {line}\n'
  >    }HG:
  >     HG: mods={file_mods}
  >     HG: adds={file_adds}
  >     HG: dels={file_dels}
  >     HG: files={files}\n
  > EOF
  $ HGEDITOR=cat hg commit -q -e -m "foo bar" added removed
  foo bar
  HG: mods=
  HG: adds=added
  HG: dels=removed
  HG: files=added removed
  HG:
  HG:
  HG: mods=
  HG: adds=added
  HG: dels=removed
  HG: files=added removed
  HG:
  HG: diff -r d2313f97106f added
  HG: --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
  HG: +++ b/added	Thu Jan 01 00:00:00 1970 +0000
  HG: @@ -0,0 +1,1 @@
  HG: +added
  HG:
  HG: mods=
  HG: adds=added
  HG: dels=removed
  HG: files=added removed
  HG:
  HG: diff -r d2313f97106f removed
  HG: --- a/removed	Thu Jan 01 00:00:00 1970 +0000
  HG: +++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
  HG: @@ -1,1 +0,0 @@
  HG: -removed
  HG:
  HG: mods=
  HG: adds=added
  HG: dels=removed
  HG: files=added removed
  $ hg status -amr
  M changed
  $ hg parents --template "M {file_mods}\nA {file_adds}\nR {file_dels}\n"
  M 
  A added
  R removed
  $ hg rollback -q

  $ cat >> .hg/hgrc <<EOF
  > # disable customizing for subsequent tests
  > [committemplate]
  > changeset =
  > EOF

  $ cd ..


commit copy

  $ hg init dir2
  $ cd dir2
  $ echo bleh > bar
  $ hg add bar
  $ hg ci -m 'add bar'

  $ hg cp bar foo
  $ echo >> bar
  $ hg ci -m 'cp bar foo; change bar'

  $ hg debugrename foo
  foo renamed from bar:26d3ca0dfd18e44d796b564e38dd173c9668d3a9
  $ hg debugindex bar
     rev linkrev nodeid       p1           p2
       0       0 26d3ca0dfd18 000000000000 000000000000
       1       1 d267bddd54f7 26d3ca0dfd18 000000000000

Test making empty commits
  $ hg commit --config ui.allowemptycommit=True -m "empty commit"
  $ hg log -r . -v --stat
  changeset:   2:d809f3644287
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  description:
  empty commit
  
  
  
verify pathauditor blocks evil filepaths
  $ cat > evil-commit.py <<EOF
  > from __future__ import absolute_import
  > from mercurial import context, hg, node, ui as uimod
  > notrc = u".h\u200cg".encode('utf-8') + b'/hgrc'
  > u = uimod.ui.load()
  > r = hg.repository(u, b'.')
  > def filectxfn(repo, memctx, path):
  >     return context.memfilectx(repo, memctx, path,
  >         b'[hooks]\nupdate = echo owned')
  > c = context.memctx(r, [r.changelog.tip(), node.nullid],
  >                    b'evil', [notrc], filectxfn, 0)
  > r.commitctx(c)
  > EOF
  $ "$PYTHON" evil-commit.py
#if windows
  $ hg co --clean tip
  abort: path contains illegal component: .h\xe2\x80\x8cg\\hgrc (esc)
  [255]
#else
  $ hg co --clean tip
  abort: path contains illegal component: .h\xe2\x80\x8cg/hgrc (esc)
  [255]
#endif

  $ hg rollback -f
  repository tip rolled back to revision 2 (undo commit)
  $ cat > evil-commit.py <<EOF
  > from __future__ import absolute_import
  > from mercurial import context, hg, node, ui as uimod
  > notrc = b"HG~1/hgrc"
  > u = uimod.ui.load()
  > r = hg.repository(u, b'.')
  > def filectxfn(repo, memctx, path):
  >     return context.memfilectx(repo, memctx, path,
  >         b'[hooks]\nupdate = echo owned')
  > c = context.memctx(r, [r[b'tip'].node(), node.nullid],
  >                    b'evil', [notrc], filectxfn, 0)
  > r.commitctx(c)
  > EOF
  $ "$PYTHON" evil-commit.py
  $ hg co --clean tip
  abort: path contains illegal component: HG~1/hgrc
  [255]

  $ hg rollback -f
  repository tip rolled back to revision 2 (undo commit)
  $ cat > evil-commit.py <<EOF
  > from __future__ import absolute_import
  > from mercurial import context, hg, node, ui as uimod
  > notrc = b"HG8B6C~2/hgrc"
  > u = uimod.ui.load()
  > r = hg.repository(u, b'.')
  > def filectxfn(repo, memctx, path):
  >     return context.memfilectx(repo, memctx, path,
  >         b'[hooks]\nupdate = echo owned')
  > c = context.memctx(r, [r[b'tip'].node(), node.nullid],
  >                    b'evil', [notrc], filectxfn, 0)
  > r.commitctx(c)
  > EOF
  $ "$PYTHON" evil-commit.py
  $ hg co --clean tip
  abort: path contains illegal component: HG8B6C~2/hgrc
  [255]

# test that an unmodified commit template message aborts

  $ hg init unmodified_commit_template
  $ cd unmodified_commit_template
  $ echo foo > foo
  $ hg add foo
  $ hg commit -m "foo"
  $ cat >> .hg/hgrc <<EOF
  > [committemplate]
  > changeset.commit = HI THIS IS NOT STRIPPED
  >     HG: this is customized commit template
  >     HG: {extramsg}
  >     {if(activebookmark,
  >    "HG: bookmark '{activebookmark}' is activated\n",
  >    "HG: no bookmark is activated\n")}{subrepos %
  >    "HG: subrepo '{subrepo}' is changed\n"}
  > EOF
  $ cat > $TESTTMP/notouching.sh <<EOF
  > true
  > EOF
  $ echo foo2 > foo2
  $ hg add foo2
  $ HGEDITOR="sh $TESTTMP/notouching.sh" hg commit
  abort: commit message unchanged
  [255]

test that text below the --- >8 --- special string is ignored

  $ cat <<'EOF' > $TESTTMP/lowercaseline.sh
  > cat $1 | sed s/LINE/line/ | tee $1.new
  > mv $1.new $1
  > EOF

  $ hg init ignore_below_special_string
  $ cd ignore_below_special_string
  $ echo foo > foo
  $ hg add foo
  $ hg commit -m "foo"
  $ cat >> .hg/hgrc <<EOF
  > [committemplate]
  > changeset.commit = first LINE
  >     HG: this is customized commit template
  >     HG: {extramsg}
  >     HG: ------------------------ >8 ------------------------
  >     {diff()}
  > EOF
  $ echo foo2 > foo2
  $ hg add foo2
  $ HGEDITOR="sh $TESTTMP/notouching.sh" hg ci
  abort: commit message unchanged
  [255]
  $ HGEDITOR="sh $TESTTMP/lowercaseline.sh" hg ci
  first line
  HG: this is customized commit template
  HG: Leave message empty to abort commit.
  HG: ------------------------ >8 ------------------------
  diff -r e63c23eaa88a foo2
  --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
  +++ b/foo2	Thu Jan 01 00:00:00 1970 +0000
  @@ -0,0 +1,1 @@
  +foo2
  $ hg log -T '{desc}\n' -r .
  first line

test that the special string --- >8 --- isn't used when not at the beginning of
a line

  $ cat >> .hg/hgrc <<EOF
  > [committemplate]
  > changeset.commit = first LINE2
  >     another line HG: ------------------------ >8 ------------------------
  >     HG: this is customized commit template
  >     HG: {extramsg}
  >     HG: ------------------------ >8 ------------------------
  >     {diff()}
  > EOF
  $ echo foo >> foo
  $ HGEDITOR="sh $TESTTMP/lowercaseline.sh" hg ci
  first line2
  another line HG: ------------------------ >8 ------------------------
  HG: this is customized commit template
  HG: Leave message empty to abort commit.
  HG: ------------------------ >8 ------------------------
  diff -r 3661b22b0702 foo
  --- a/foo	Thu Jan 01 00:00:00 1970 +0000
  +++ b/foo	Thu Jan 01 00:00:00 1970 +0000
  @@ -1,1 +1,2 @@
   foo
  +foo
  $ hg log -T '{desc}\n' -r .
  first line2
  another line HG: ------------------------ >8 ------------------------

also test that this special string isn't accepted when there is some extra text
at the end

  $ cat >> .hg/hgrc <<EOF
  > [committemplate]
  > changeset.commit = first LINE3
  >     HG: ------------------------ >8 ------------------------foobar
  >     second line
  >     HG: this is customized commit template
  >     HG: {extramsg}
  >     HG: ------------------------ >8 ------------------------
  >     {diff()}
  > EOF
  $ echo foo >> foo
  $ HGEDITOR="sh $TESTTMP/lowercaseline.sh" hg ci
  first line3
  HG: ------------------------ >8 ------------------------foobar
  second line
  HG: this is customized commit template
  HG: Leave message empty to abort commit.
  HG: ------------------------ >8 ------------------------
  diff -r ce648f5f066f foo
  --- a/foo	Thu Jan 01 00:00:00 1970 +0000
  +++ b/foo	Thu Jan 01 00:00:00 1970 +0000
  @@ -1,2 +1,3 @@
   foo
   foo
  +foo
  $ hg log -T '{desc}\n' -r .
  first line3
  second line

  $ cd ..