view tests/test-convert-git.t @ 42222:57203e0210f8

copies: calculate mergecopies() based on pathcopies()

When copies are stored in changesets, we need a changeset-centric
version of mergecopies() just like we have a changeset-centric version
of pathcopies(). I think the natural way of thinking about
mergecopies() is in terms of pathcopies() from the base to each of the
commits. So if we can rewrite mergecopies() based on two such
pathcopies() calls, we'll get the changeset-centric version for
free. That's what this patch does.

A nice bonus is that it ends up being a lot simpler. mergecopies() has
accumulated a lot of technical debt over time. One good example is the
code for dealing with grafts (the "partial/incomplete/dirty"
stuff). Since pathcopies() already deals with backwards renames and
ping-pong renames, we get that for free.

I've run tests with hard-coded debug logging for "fullcopy" and while
I haven't looked at every difference it produces, all the ones I have
looked at seemed reasonable to me. I'm a little surprised that no more
tests fail when run with '--extra-config-opt
experimental.copies.read-from=compatibility' compared to before this
patch. This patch also fixes the broken cases in test-annotate.t and
test-fastannotate.t. It also enables the part of test-copies.t that
was previously disabled exactly because mergecopies() needed to get a
changeset-centric version.

One drawback of the rewritten code is that we may now make
remotefilelog prefetch more files. We used to prefetch files that were
unique to either side of the merge compared to the other. We now
prefetch files that are unique to either side of the merge compared to
the base. This means that if you added the same file to each side, we
would not prefetch it before, but we would now. Such cases are
probably quite rare, but one likely scenario where they happen is when
moving from a commit to its successor (or the other way around). The
user will probably already have the files in the cache in such cases,
so it's probably not a big deal.

Some timings for calculating mergecopies between two revisions
(revisions shown on each line, all using the common ancestor as base):

In the hg repo:
4.8 4.9: 0.21s -> 0.21s
4.0 4.8: 0.35s -> 0.63s

In and old copy of the mozilla-unified repo:
FIREFOX_BETA_60_BASE^ FIREFOX_BETA_60_BASE: 0.82s -> 0.82s
FIREFOX_NIGHTLY_59_END FIREFOX_BETA_60_BASE: 2.5s -> 2.6s
FIREFOX_BETA_59_END FIREFOX_BETA_60_BASE: 3.9s -> 4.1s
FIREFOX_AURORA_50_BASE FIREFOX_BETA_60_BASE: 31s -> 33s

So it's measurably slower in most cases. The most significant
difference is in the hg repo between revisions 4.0 and 4.8. In that
case it seems to come from the fact that pathcopies() uses
fctx.isintroducedafter() (in _tracefile), while the old mergecopies()
used fctx.linkrev() (in _checkcopies()). That results in a single call
to filectx._adjustlinkrev(), which is responsible for the entire
difference in time (in my repo). So we pay a performance penalty but
we get more correct code (see change in
test-mv-cp-st-diff.t). Deleting the "== f.filenode()" in _tracefile()
recovers the lost performance in the hg repo.

There were are few other optimizations in _checkcopies() that I could
not measure any impact from. One was from the "seen" set. Another was
from a "continue" when the file was not in the destination manifest
(corresponding to "am" in _tracefile).

Also note that merge copies are not calculated when updating with a
clean working copy, which is probably the most common case. I
therefore think the much simpler code is worth the slowdown.

Differential Revision: https://phab.mercurial-scm.org/D6255

#require git

  $ echo "[core]" >> $HOME/.gitconfig
  $ echo "autocrlf = false" >> $HOME/.gitconfig
  $ echo "[core]" >> $HOME/.gitconfig
  $ echo "autocrlf = false" >> $HOME/.gitconfig
  $ echo "[extensions]" >> $HGRCPATH
  $ echo "convert=" >> $HGRCPATH
  $ cat >> $HGRCPATH <<EOF
  > [subrepos]
  > git:allowed = true
  > EOF
  $ GIT_AUTHOR_NAME='test'; export GIT_AUTHOR_NAME
  $ GIT_AUTHOR_EMAIL='[e-mail]'; export GIT_AUTHOR_EMAIL
  $ GIT_AUTHOR_DATE="2007-01-01 00:00:00 +0000"; export GIT_AUTHOR_DATE
  $ GIT_COMMITTER_NAME="$GIT_AUTHOR_NAME"; export GIT_COMMITTER_NAME
  $ GIT_COMMITTER_EMAIL="$GIT_AUTHOR_EMAIL"; export GIT_COMMITTER_EMAIL
  $ GIT_COMMITTER_DATE="$GIT_AUTHOR_DATE"; export GIT_COMMITTER_DATE
  $ INVALIDID1=afd12345af
  $ INVALIDID2=28173x36ddd1e67bf7098d541130558ef5534a86
  $ VALIDID1=39b3d83f9a69a9ba4ebb111461071a0af0027357
  $ VALIDID2=8dd6476bd09d9c7776355dc454dafe38efaec5da
  $ count=10
  $ commit()
  > {
  >     GIT_AUTHOR_DATE="2007-01-01 00:00:$count +0000"
  >     GIT_COMMITTER_DATE="$GIT_AUTHOR_DATE"
  >     git commit "$@" >/dev/null 2>/dev/null || echo "git commit error"
  >     count=`expr $count + 1`
  > }
  $ mkdir git-repo
  $ cd git-repo
  $ git init-db >/dev/null 2>/dev/null
  $ echo a > a
  $ mkdir d
  $ echo b > d/b
  $ git add a d
  $ commit -a -m t1

Remove the directory, then try to replace it with a file (issue754)

  $ git rm -f d/b
  rm 'd/b'
  $ commit -m t2
  $ echo d > d
  $ git add d
  $ commit -m t3
  $ echo b >> a
  $ commit -a -m t4.1
  $ git checkout -b other HEAD~ >/dev/null 2>/dev/null
  $ echo c > a
  $ echo a >> a
  $ commit -a -m t4.2
  $ git checkout master >/dev/null 2>/dev/null
  $ git pull --no-commit . other > /dev/null 2>/dev/null
  $ commit -m 'Merge branch other'
  $ cd ..
  $ hg convert --config extensions.progress= --config progress.assume-tty=1 \
  >   --config progress.delay=0 --config progress.changedelay=0 \
  >   --config progress.refresh=0 --config progress.width=60 \
  >   --config progress.format='topic, bar, number' --datesort git-repo
  \r (no-eol) (esc)
  scanning [======>                                     ] 1/6\r (no-eol) (esc)
  scanning [=============>                              ] 2/6\r (no-eol) (esc)
  scanning [=====================>                      ] 3/6\r (no-eol) (esc)
  scanning [============================>               ] 4/6\r (no-eol) (esc)
  scanning [===================================>        ] 5/6\r (no-eol) (esc)
  scanning [===========================================>] 6/6\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [                                          ] 0/6\r (no-eol) (esc)
  getting files [==================>                    ] 1/2\r (no-eol) (esc)
  getting files [======================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [======>                                   ] 1/6\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [=============>                            ] 2/6\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [====================>                     ] 3/6\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [===========================>              ] 4/6\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [==================================>       ] 5/6\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  assuming destination git-repo-hg
  initializing destination git-repo-hg repository
  scanning source...
  sorting...
  converting...
  5 t1
  4 t2
  3 t3
  2 t4.1
  1 t4.2
  0 Merge branch other
  updating bookmarks
  $ hg up -q -R git-repo-hg
  $ hg -R git-repo-hg tip -v
  changeset:   5:c78094926be2
  bookmark:    master
  tag:         tip
  parent:      3:f5f5cb45432b
  parent:      4:4e174f80c67c
  user:        test <[e-mail]>
  date:        Mon Jan 01 00:00:15 2007 +0000
  files:       a
  description:
  Merge branch other
  
  
  $ count=10
  $ mkdir git-repo2
  $ cd git-repo2
  $ git init-db >/dev/null 2>/dev/null
  $ echo foo > foo
  $ git add foo
  $ commit -a -m 'add foo'
  $ echo >> foo
  $ commit -a -m 'change foo'
  $ git checkout -b Bar HEAD~ >/dev/null 2>/dev/null
  $ echo quux >> quux
  $ git add quux
  $ commit -a -m 'add quux'
  $ echo bar > bar
  $ git add bar
  $ commit -a -m 'add bar'
  $ git checkout -b Baz HEAD~ >/dev/null 2>/dev/null
  $ echo baz > baz
  $ git add baz
  $ commit -a -m 'add baz'
  $ git checkout master >/dev/null 2>/dev/null
  $ git pull --no-commit . Bar Baz > /dev/null 2>/dev/null
  $ commit -m 'Octopus merge'
  $ echo bar >> bar
  $ commit -a -m 'change bar'
  $ git checkout -b Foo HEAD~ >/dev/null 2>/dev/null
  $ echo >> foo
  $ commit -a -m 'change foo'
  $ git checkout master >/dev/null 2>/dev/null
  $ git pull --no-commit -s ours . Foo > /dev/null 2>/dev/null
  $ commit -m 'Discard change to foo'
  $ cd ..
  $ glog()
  > {
  >     hg log -G --template '{rev} "{desc|firstline}" files: {files}\n' "$@"
  > }
  $ splitrepo()
  > {
  >     msg="$1"
  >     files="$2"
  >     opts=$3
  >     echo "% $files: $msg"
  >     prefix=`echo "$files" | sed -e 's/ /-/g'`
  >     fmap="$prefix.fmap"
  >     repo="$prefix.repo"
  >     for i in $files; do
  >         echo "include $i" >> "$fmap"
  >     done
  >     hg -q convert $opts --filemap "$fmap" --datesort git-repo2 "$repo"
  >     hg up -q -R "$repo"
  >     glog -R "$repo"
  >     hg -R "$repo" manifest --debug
  > }

full conversion

  $ hg convert --datesort git-repo2 fullrepo \
  > --config extensions.progress= --config progress.assume-tty=1 \
  > --config progress.delay=0 --config progress.changedelay=0 \
  > --config progress.refresh=0 --config progress.width=60 \
  > --config progress.format='topic, bar, number'
  \r (no-eol) (esc)
  scanning [===>                                        ] 1/9\r (no-eol) (esc)
  scanning [========>                                   ] 2/9\r (no-eol) (esc)
  scanning [=============>                              ] 3/9\r (no-eol) (esc)
  scanning [==================>                         ] 4/9\r (no-eol) (esc)
  scanning [=======================>                    ] 5/9\r (no-eol) (esc)
  scanning [============================>               ] 6/9\r (no-eol) (esc)
  scanning [=================================>          ] 7/9\r (no-eol) (esc)
  scanning [======================================>     ] 8/9\r (no-eol) (esc)
  scanning [===========================================>] 9/9\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [                                          ] 0/9\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [===>                                      ] 1/9\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [========>                                 ] 2/9\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [=============>                            ] 3/9\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [=================>                        ] 4/9\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [======================>                   ] 5/9\r (no-eol) (esc)
  getting files [===>                                   ] 1/8\r (no-eol) (esc)
  getting files [========>                              ] 2/8\r (no-eol) (esc)
  getting files [=============>                         ] 3/8\r (no-eol) (esc)
  getting files [==================>                    ] 4/8\r (no-eol) (esc)
  getting files [=======================>               ] 5/8\r (no-eol) (esc)
  getting files [============================>          ] 6/8\r (no-eol) (esc)
  getting files [=================================>     ] 7/8\r (no-eol) (esc)
  getting files [======================================>] 8/8\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [===========================>              ] 6/9\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [===============================>          ] 7/9\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [====================================>     ] 8/9\r (no-eol) (esc)
  getting files [==================>                    ] 1/2\r (no-eol) (esc)
  getting files [======================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  initializing destination fullrepo repository
  scanning source...
  sorting...
  converting...
  8 add foo
  7 change foo
  6 add quux
  5 add bar
  4 add baz
  3 Octopus merge
  2 change bar
  1 change foo
  0 Discard change to foo
  updating bookmarks
  $ hg up -q -R fullrepo
  $ glog -R fullrepo
  @    9 "Discard change to foo" files: foo
  |\
  | o  8 "change foo" files: foo
  | |
  o |  7 "change bar" files: bar
  |/
  o    6 "(octopus merge fixup)" files:
  |\
  | o    5 "Octopus merge" files: baz
  | |\
  o | |  4 "add baz" files: baz
  | | |
  +---o  3 "add bar" files: bar
  | |
  o |  2 "add quux" files: quux
  | |
  | o  1 "change foo" files: foo
  |/
  o  0 "add foo" files: foo
  
  $ hg -R fullrepo manifest --debug
  245a3b8bc653999c2b22cdabd517ccb47aecafdf 644   bar
  354ae8da6e890359ef49ade27b68bbc361f3ca88 644   baz
  9277c9cc8dd4576fc01a17939b4351e5ada93466 644   foo
  88dfeab657e8cf2cef3dec67b914f49791ae76b1 644   quux
  $ splitrepo 'octopus merge' 'foo bar baz'
  % foo bar baz: octopus merge
  @    8 "Discard change to foo" files: foo
  |\
  | o  7 "change foo" files: foo
  | |
  o |  6 "change bar" files: bar
  |/
  o    5 "(octopus merge fixup)" files:
  |\
  | o    4 "Octopus merge" files: baz
  | |\
  o | |  3 "add baz" files: baz
  | | |
  +---o  2 "add bar" files: bar
  | |
  | o  1 "change foo" files: foo
  |/
  o  0 "add foo" files: foo
  
  245a3b8bc653999c2b22cdabd517ccb47aecafdf 644   bar
  354ae8da6e890359ef49ade27b68bbc361f3ca88 644   baz
  9277c9cc8dd4576fc01a17939b4351e5ada93466 644   foo
  $ splitrepo 'only some parents of an octopus merge; "discard" a head' 'foo baz quux'
  % foo baz quux: only some parents of an octopus merge; "discard" a head
  @  6 "Discard change to foo" files: foo
  |
  o  5 "change foo" files: foo
  |
  o    4 "Octopus merge" files:
  |\
  | o  3 "add baz" files: baz
  | |
  | o  2 "add quux" files: quux
  | |
  o |  1 "change foo" files: foo
  |/
  o  0 "add foo" files: foo
  
  354ae8da6e890359ef49ade27b68bbc361f3ca88 644   baz
  9277c9cc8dd4576fc01a17939b4351e5ada93466 644   foo
  88dfeab657e8cf2cef3dec67b914f49791ae76b1 644   quux

test importing git renames and copies

  $ cd git-repo2
  $ git mv foo foo-renamed
since bar is not touched in this commit, this copy will not be detected
  $ cp bar bar-copied
  $ cp baz baz-copied
  $ cp baz baz-copied2
  $ cp baz ba-copy
  $ echo baz2 >> baz
  $ git add bar-copied baz-copied baz-copied2 ba-copy
  $ commit -a -m 'rename and copy'
  $ cd ..

input validation
  $ hg convert --config convert.git.similarity=foo --datesort git-repo2 fullrepo
  abort: convert.git.similarity is not a valid integer ('foo')
  [255]
  $ hg convert --config convert.git.similarity=-1 --datesort git-repo2 fullrepo
  abort: similarity must be between 0 and 100
  [255]
  $ hg convert --config convert.git.similarity=101 --datesort git-repo2 fullrepo
  abort: similarity must be between 0 and 100
  [255]

  $ hg -q convert --config convert.git.similarity=100 --datesort git-repo2 fullrepo
  $ hg -R fullrepo status -C --change master
  M baz
  A ba-copy
    baz
  A bar-copied
  A baz-copied
    baz
  A baz-copied2
    baz
  A foo-renamed
    foo
  R foo

Ensure that the modification to the copy source was preserved
(there was a bug where if the copy dest was alphabetically prior to the copy
source, the copy source took the contents of the copy dest)
  $ hg cat -r tip fullrepo/baz
  baz
  baz2

  $ cd git-repo2
  $ echo bar2 >> bar
  $ commit -a -m 'change bar'
  $ cp bar bar-copied2
  $ git add bar-copied2
  $ commit -a -m 'copy with no changes'
  $ cd ..

  $ hg -q convert --config convert.git.similarity=100 \
  > --config convert.git.findcopiesharder=1 --datesort git-repo2 fullrepo
  $ hg -R fullrepo status -C --change master
  A bar-copied2
    bar

renamelimit config option works

  $ cd git-repo2
  $ cat >> copy-source << EOF
  > sc0
  > sc1
  > sc2
  > sc3
  > sc4
  > sc5
  > sc6
  > EOF
  $ git add copy-source
  $ commit -m 'add copy-source'
  $ cp copy-source source-copy0
  $ echo 0 >> source-copy0
  $ cp copy-source source-copy1
  $ echo 1 >> source-copy1
  $ git add source-copy0 source-copy1
  $ commit -a -m 'copy copy-source 2 times'
  $ cd ..

  $ hg -q convert --config convert.git.renamelimit=1 \
  > --config convert.git.findcopiesharder=true --datesort git-repo2 fullrepo2
  $ hg -R fullrepo2 status -C --change master
  A source-copy0
  A source-copy1

  $ hg -q convert --config convert.git.renamelimit=100 \
  > --config convert.git.findcopiesharder=true --datesort git-repo2 fullrepo3
  $ hg -R fullrepo3 status -C --change master
  A source-copy0
    copy-source
  A source-copy1
    copy-source

test binary conversion (issue1359)

  $ count=19
  $ mkdir git-repo3
  $ cd git-repo3
  $ git init-db >/dev/null 2>/dev/null
  $ "$PYTHON" -c 'import struct; open("b", "wb").write(b"".join([struct.Struct(">B").pack(i) for i in range(256)])*16)'
  $ git add b
  $ commit -a -m addbinary
  $ cd ..

convert binary file

  $ hg convert git-repo3 git-repo3-hg
  initializing destination git-repo3-hg repository
  scanning source...
  sorting...
  converting...
  0 addbinary
  updating bookmarks
  $ cd git-repo3-hg
  $ hg up -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ "$PYTHON" -c 'from __future__ import print_function; print(len(open("b", "rb").read()))'
  4096
  $ cd ..

test author vs committer

  $ mkdir git-repo4
  $ cd git-repo4
  $ git init-db >/dev/null 2>/dev/null
  $ echo >> foo
  $ git add foo
  $ commit -a -m addfoo
  $ echo >> foo
  $ GIT_AUTHOR_NAME="nottest"
  $ commit -a -m addfoo2
  $ cd ..

convert author committer

  $ hg convert git-repo4 git-repo4-hg
  initializing destination git-repo4-hg repository
  scanning source...
  sorting...
  converting...
  1 addfoo
  0 addfoo2
  updating bookmarks
  $ hg -R git-repo4-hg log -v
  changeset:   1:d63e967f93da
  bookmark:    master
  tag:         tip
  user:        nottest <[e-mail]>
  date:        Mon Jan 01 00:00:21 2007 +0000
  files:       foo
  description:
  addfoo2
  
  committer: test <[e-mail]>
  
  
  changeset:   0:0735477b0224
  user:        test <[e-mail]>
  date:        Mon Jan 01 00:00:20 2007 +0000
  files:       foo
  description:
  addfoo
  
  

Various combinations of committeractions fail

  $ hg --config convert.git.committeractions=messagedifferent,messagealways convert git-repo4 bad-committer
  initializing destination bad-committer repository
  abort: committeractions cannot define both messagedifferent and messagealways
  [255]

  $ hg --config convert.git.committeractions=dropcommitter,replaceauthor convert git-repo4 bad-committer
  initializing destination bad-committer repository
  abort: committeractions cannot define both dropcommitter and replaceauthor
  [255]

  $ hg --config convert.git.committeractions=dropcommitter,messagealways convert git-repo4 bad-committer
  initializing destination bad-committer repository
  abort: committeractions cannot define both dropcommitter and messagealways
  [255]

custom prefix on messagedifferent works

  $ hg --config convert.git.committeractions=messagedifferent=different: convert git-repo4 git-repo4-hg-messagedifferentprefix
  initializing destination git-repo4-hg-messagedifferentprefix repository
  scanning source...
  sorting...
  converting...
  1 addfoo
  0 addfoo2
  updating bookmarks

  $ hg -R git-repo4-hg-messagedifferentprefix log -v
  changeset:   1:2fe0c98a109d
  bookmark:    master
  tag:         tip
  user:        nottest <[e-mail]>
  date:        Mon Jan 01 00:00:21 2007 +0000
  files:       foo
  description:
  addfoo2
  
  different: test <[e-mail]>
  
  
  changeset:   0:0735477b0224
  user:        test <[e-mail]>
  date:        Mon Jan 01 00:00:20 2007 +0000
  files:       foo
  description:
  addfoo
  
  

messagealways will always add the "committer: " line even if committer identical

  $ hg --config convert.git.committeractions=messagealways convert git-repo4 git-repo4-hg-messagealways
  initializing destination git-repo4-hg-messagealways repository
  scanning source...
  sorting...
  converting...
  1 addfoo
  0 addfoo2
  updating bookmarks

  $ hg -R git-repo4-hg-messagealways log -v
  changeset:   1:8db057d8cd37
  bookmark:    master
  tag:         tip
  user:        nottest <[e-mail]>
  date:        Mon Jan 01 00:00:21 2007 +0000
  files:       foo
  description:
  addfoo2
  
  committer: test <[e-mail]>
  
  
  changeset:   0:8f71fe9c98be
  user:        test <[e-mail]>
  date:        Mon Jan 01 00:00:20 2007 +0000
  files:       foo
  description:
  addfoo
  
  committer: test <[e-mail]>
  
  

custom prefix on messagealways works

  $ hg --config convert.git.committeractions=messagealways=always: convert git-repo4 git-repo4-hg-messagealwaysprefix
  initializing destination git-repo4-hg-messagealwaysprefix repository
  scanning source...
  sorting...
  converting...
  1 addfoo
  0 addfoo2
  updating bookmarks

  $ hg -R git-repo4-hg-messagealwaysprefix log -v
  changeset:   1:83c17174de79
  bookmark:    master
  tag:         tip
  user:        nottest <[e-mail]>
  date:        Mon Jan 01 00:00:21 2007 +0000
  files:       foo
  description:
  addfoo2
  
  always: test <[e-mail]>
  
  
  changeset:   0:2ac9bcb3534a
  user:        test <[e-mail]>
  date:        Mon Jan 01 00:00:20 2007 +0000
  files:       foo
  description:
  addfoo
  
  always: test <[e-mail]>
  
  

replaceauthor replaces author with committer

  $ hg --config convert.git.committeractions=replaceauthor convert git-repo4 git-repo4-hg-replaceauthor
  initializing destination git-repo4-hg-replaceauthor repository
  scanning source...
  sorting...
  converting...
  1 addfoo
  0 addfoo2
  updating bookmarks

  $ hg -R git-repo4-hg-replaceauthor log -v
  changeset:   1:122c1d8999ea
  bookmark:    master
  tag:         tip
  user:        test <[e-mail]>
  date:        Mon Jan 01 00:00:21 2007 +0000
  files:       foo
  description:
  addfoo2
  
  
  changeset:   0:0735477b0224
  user:        test <[e-mail]>
  date:        Mon Jan 01 00:00:20 2007 +0000
  files:       foo
  description:
  addfoo
  
  

dropcommitter removes the committer

  $ hg --config convert.git.committeractions=dropcommitter convert git-repo4 git-repo4-hg-dropcommitter
  initializing destination git-repo4-hg-dropcommitter repository
  scanning source...
  sorting...
  converting...
  1 addfoo
  0 addfoo2
  updating bookmarks

  $ hg -R git-repo4-hg-dropcommitter log -v
  changeset:   1:190b2da396cc
  bookmark:    master
  tag:         tip
  user:        nottest <[e-mail]>
  date:        Mon Jan 01 00:00:21 2007 +0000
  files:       foo
  description:
  addfoo2
  
  
  changeset:   0:0735477b0224
  user:        test <[e-mail]>
  date:        Mon Jan 01 00:00:20 2007 +0000
  files:       foo
  description:
  addfoo
  
  

--sourceorder should fail

  $ hg convert --sourcesort git-repo4 git-repo4-sourcesort-hg
  initializing destination git-repo4-sourcesort-hg repository
  abort: --sourcesort is not supported by this data source
  [255]

test converting certain branches

  $ mkdir git-testrevs
  $ cd git-testrevs
  $ git init
  Initialized empty Git repository in $TESTTMP/git-testrevs/.git/
  $ echo a >> a ; git add a > /dev/null; git commit -m 'first' > /dev/null
  $ echo a >> a ; git add a > /dev/null; git commit -m 'master commit' > /dev/null
  $ git checkout -b goodbranch 'HEAD^'
  Switched to a new branch 'goodbranch'
  $ echo a >> b ; git add b > /dev/null; git commit -m 'good branch commit' > /dev/null
  $ git checkout -b badbranch 'HEAD^'
  Switched to a new branch 'badbranch'
  $ echo a >> c ; git add c > /dev/null; git commit -m 'bad branch commit' > /dev/null
  $ cd ..
  $ hg convert git-testrevs hg-testrevs --rev master --rev goodbranch
  initializing destination hg-testrevs repository
  scanning source...
  sorting...
  converting...
  2 first
  1 good branch commit
  0 master commit
  updating bookmarks
  $ cd hg-testrevs
  $ hg log -G -T '{rev} {bookmarks}'
  o  2 master
  |
  | o  1 goodbranch
  |/
  o  0
  
  $ cd ..

test sub modules

  $ mkdir git-repo5
  $ cd git-repo5
  $ git init-db >/dev/null 2>/dev/null
  $ echo 'sub' >> foo
  $ git add foo
  $ commit -a -m 'addfoo'
  $ BASE=`pwd`
  $ cd ..
  $ mkdir git-repo6
  $ cd git-repo6
  $ git init-db >/dev/null 2>/dev/null
  $ git submodule add ${BASE} >/dev/null 2>/dev/null
  $ commit -a -m 'addsubmodule' >/dev/null 2>/dev/null

test non-tab whitespace .gitmodules

  $ cat >> .gitmodules <<EOF
  > [submodule "git-repo5"]
  >   path = git-repo5
  >   url = git-repo5
  > EOF
  $ git commit -q -a -m "weird white space submodule"
  $ cd ..
  $ hg convert git-repo6 hg-repo6
  initializing destination hg-repo6 repository
  scanning source...
  sorting...
  converting...
  1 addsubmodule
  0 weird white space submodule
  updating bookmarks

  $ rm -rf hg-repo6
  $ cd git-repo6
  $ git reset --hard 'HEAD^' > /dev/null

test missing .gitmodules

  $ git submodule add ../git-repo4 >/dev/null 2>/dev/null
  $ git checkout HEAD -- .gitmodules
  $ git rm .gitmodules
  rm '.gitmodules'
  $ git commit -q -m "remove .gitmodules" .gitmodules
  $ git commit -q -m "missing .gitmodules"
  $ cd ..
  $ hg convert git-repo6 hg-repo6 --traceback 2>&1 | grep -v "fatal: Path '.gitmodules' does not exist"
  initializing destination hg-repo6 repository
  scanning source...
  sorting...
  converting...
  2 addsubmodule
  1 remove .gitmodules
  0 missing .gitmodules
  warning: cannot read submodules config file in * (glob)
  updating bookmarks
  $ rm -rf hg-repo6
  $ cd git-repo6
  $ rm -rf git-repo4
  $ git reset --hard 'HEAD^^' > /dev/null
  $ cd ..

test invalid splicemap1

  $ cat > splicemap <<EOF
  > $VALIDID1
  > EOF
  $ hg convert --splicemap splicemap git-repo2 git-repo2-splicemap1-hg
  initializing destination git-repo2-splicemap1-hg repository
  abort: syntax error in splicemap(1): child parent1[,parent2] expected
  [255]

test invalid splicemap2

  $ cat > splicemap <<EOF
  > $VALIDID1 $VALIDID2, $VALIDID2, $VALIDID2
  > EOF
  $ hg convert --splicemap splicemap git-repo2 git-repo2-splicemap2-hg
  initializing destination git-repo2-splicemap2-hg repository
  abort: syntax error in splicemap(1): child parent1[,parent2] expected
  [255]

test invalid splicemap3

  $ cat > splicemap <<EOF
  > $INVALIDID1 $INVALIDID2
  > EOF
  $ hg convert --splicemap splicemap git-repo2 git-repo2-splicemap3-hg
  initializing destination git-repo2-splicemap3-hg repository
  abort: splicemap entry afd12345af is not a valid revision identifier
  [255]

convert sub modules
  $ hg convert git-repo6 git-repo6-hg
  initializing destination git-repo6-hg repository
  scanning source...
  sorting...
  converting...
  0 addsubmodule
  updating bookmarks
  $ hg -R git-repo6-hg log -v
  changeset:   0:* (glob)
  bookmark:    master
  tag:         tip
  user:        nottest <[e-mail]>
  date:        Mon Jan 01 00:00:23 2007 +0000
  files:       .hgsub .hgsubstate
  description:
  addsubmodule
  
  committer: test <[e-mail]>
  
  

  $ cd git-repo6-hg
  $ hg up >/dev/null 2>/dev/null
  $ cat .hgsubstate
  * git-repo5 (glob)
  $ cd git-repo5
  $ cat foo
  sub

  $ cd ../..

make sure rename detection doesn't break removing and adding gitmodules

  $ cd git-repo6
  $ git mv .gitmodules .gitmodules-renamed
  $ commit -a -m 'rename .gitmodules'
  $ git mv .gitmodules-renamed .gitmodules
  $ commit -a -m 'rename .gitmodules back'
  $ cd ..

  $ hg --config convert.git.similarity=100 convert -q git-repo6 git-repo6-hg
  $ hg -R git-repo6-hg log -r 'tip^' -T "{desc|firstline}\n"
  rename .gitmodules
  $ hg -R git-repo6-hg status -C --change 'tip^'
  A .gitmodules-renamed
  R .hgsub
  R .hgsubstate
  $ hg -R git-repo6-hg log -r tip -T "{desc|firstline}\n"
  rename .gitmodules back
  $ hg -R git-repo6-hg status -C --change tip
  A .hgsub
  A .hgsubstate
  R .gitmodules-renamed

convert the revision removing '.gitmodules' itself (and related
submodules)

  $ cd git-repo6
  $ git rm .gitmodules
  rm '.gitmodules'
  $ git rm --cached git-repo5
  rm 'git-repo5'
  $ commit -a -m 'remove .gitmodules and submodule git-repo5'
  $ cd ..

  $ hg convert -q git-repo6 git-repo6-hg
  $ hg -R git-repo6-hg tip -T "{desc|firstline}\n"
  remove .gitmodules and submodule git-repo5
  $ hg -R git-repo6-hg tip -T "{file_dels}\n"
  .hgsub .hgsubstate

skip submodules in the conversion

  $ hg convert -q git-repo6 no-submodules --config convert.git.skipsubmodules=True
  $ hg -R no-submodules manifest --all
  .gitmodules-renamed

convert using a different remote prefix
  $ git init git-repo7
  Initialized empty Git repository in $TESTTMP/git-repo7/.git/
  $ cd git-repo7
TODO: it'd be nice to use (?) lines instead of grep -v to handle the
git output variance, but that doesn't currently work in the middle of
a block, so do this for now.
  $ touch a && git add a && git commit -am "commit a" | grep -v changed
  [master (root-commit) 8ae5f69] commit a
   Author: nottest <[e-mail]>
   create mode 100644 a
  $ cd ..
  $ git clone git-repo7 git-repo7-client
  Cloning into 'git-repo7-client'...
  done.
  $ hg convert --config convert.git.remoteprefix=origin git-repo7-client hg-repo7
  initializing destination hg-repo7 repository
  scanning source...
  sorting...
  converting...
  0 commit a
  updating bookmarks
  $ hg -R hg-repo7 bookmarks
     master                    0:03bf38caa4c6
     origin/master             0:03bf38caa4c6

Run convert when the remote branches have changed
(there was an old bug where the local convert read branches from the server)

  $ cd git-repo7
  $ echo a >> a
  $ git commit -q -am "move master forward"
  $ cd ..
  $ rm -rf hg-repo7
  $ hg convert --config convert.git.remoteprefix=origin git-repo7-client hg-repo7
  initializing destination hg-repo7 repository
  scanning source...
  sorting...
  converting...
  0 commit a
  updating bookmarks
  $ hg -R hg-repo7 bookmarks
     master                    0:03bf38caa4c6
     origin/master             0:03bf38caa4c6

damaged git repository tests:
In case the hard-coded hashes change, the following commands can be used to
list the hashes and their corresponding types in the repository:
cd git-repo4/.git/objects
find . -type f | cut -c 3- | sed 's_/__' | xargs -n 1 -t git cat-file -t
cd ../../..

damage git repository by renaming a commit object
  $ COMMIT_OBJ=1c/0ce3c5886f83a1d78a7b517cdff5cf9ca17bdd
  $ mv git-repo4/.git/objects/$COMMIT_OBJ git-repo4/.git/objects/$COMMIT_OBJ.tmp
  $ hg convert git-repo4 git-repo4-broken-hg 2>&1 | grep 'abort:'
  abort: cannot retrieve number of commits in $TESTTMP/git-repo4/.git
  $ mv git-repo4/.git/objects/$COMMIT_OBJ.tmp git-repo4/.git/objects/$COMMIT_OBJ
damage git repository by renaming a blob object

  $ BLOB_OBJ=8b/137891791fe96927ad78e64b0aad7bded08bdc
  $ mv git-repo4/.git/objects/$BLOB_OBJ git-repo4/.git/objects/$BLOB_OBJ.tmp
  $ hg convert git-repo4 git-repo4-broken-hg 2>&1 | grep 'abort:'
  abort: cannot read 'blob' object at 8b137891791fe96927ad78e64b0aad7bded08bdc
  $ mv git-repo4/.git/objects/$BLOB_OBJ.tmp git-repo4/.git/objects/$BLOB_OBJ
damage git repository by renaming a tree object

  $ TREE_OBJ=72/49f083d2a63a41cc737764a86981eb5f3e4635
  $ mv git-repo4/.git/objects/$TREE_OBJ git-repo4/.git/objects/$TREE_OBJ.tmp
  $ hg convert git-repo4 git-repo4-broken-hg 2>&1 | grep 'abort:'
  abort: cannot read changes in 1c0ce3c5886f83a1d78a7b517cdff5cf9ca17bdd

#if no-windows git19

test for escaping the repo name (CVE-2016-3069)

  $ git init '`echo pwned >COMMAND-INJECTION`'
  Initialized empty Git repository in $TESTTMP/`echo pwned >COMMAND-INJECTION`/.git/
  $ cd '`echo pwned >COMMAND-INJECTION`'
  $ git commit -q --allow-empty -m 'empty'
  $ cd ..
  $ hg convert '`echo pwned >COMMAND-INJECTION`' 'converted'
  initializing destination converted repository
  scanning source...
  sorting...
  converting...
  0 empty
  updating bookmarks
  $ test -f COMMAND-INJECTION
  [1]

test for safely passing paths to git (CVE-2016-3105)

  $ git init 'ext::sh -c echo% pwned% >GIT-EXT-COMMAND-INJECTION% #'
  Initialized empty Git repository in $TESTTMP/ext::sh -c echo% pwned% >GIT-EXT-COMMAND-INJECTION% #/.git/
  $ cd 'ext::sh -c echo% pwned% >GIT-EXT-COMMAND-INJECTION% #'
  $ git commit -q --allow-empty -m 'empty'
  $ cd ..
  $ hg convert 'ext::sh -c echo% pwned% >GIT-EXT-COMMAND-INJECTION% #' 'converted-git-ext'
  initializing destination converted-git-ext repository
  scanning source...
  sorting...
  converting...
  0 empty
  updating bookmarks
  $ test -f GIT-EXT-COMMAND-INJECTION
  [1]

#endif

Conversion of extra commit metadata to extras works

  $ git init gitextras >/dev/null 2>/dev/null
  $ cd gitextras
  $ touch foo
  $ git add foo
  $ commit -m initial
  $ echo 1 > foo
  $ tree=`git write-tree`

Git doesn't provider a user-facing API to write extra metadata into the
commit, so create the commit object by hand

  $ git hash-object -t commit -w --stdin << EOF
  > tree ${tree}
  > parent ba6b1344e977ece9e00958dbbf17f1f09384b2c1
  > author test <[e-mail]> 1000000000 +0000
  > committer test <[e-mail]> 1000000000 +0000
  > extra-1 extra-1
  > extra-2 extra-2 with space
  > convert_revision 0000aaaabbbbccccddddeeee
  > 
  > message with extras
  > EOF
  8123727c8361a4117d1a2d80e0c4e7d70c757f18

  $ git reset --hard 8123727c8361a4117d1a2d80e0c4e7d70c757f18 > /dev/null

  $ cd ..

convert will not retain custom metadata keys by default

  $ hg convert gitextras hgextras1
  initializing destination hgextras1 repository
  scanning source...
  sorting...
  converting...
  1 initial
  0 message with extras
  updating bookmarks

  $ hg -R hgextras1 log --debug -r 1
  changeset:   1:e13a39880f68479127b2a80fa0b448cc8524aa09
  bookmark:    master
  tag:         tip
  phase:       draft
  parent:      0:dcb68977c55cd02cbd13b901df65c4b6e7b9c4b9
  parent:      -1:0000000000000000000000000000000000000000
  manifest:    0:6a3df4de388f3c4f8e28f4f9a814299a3cbb5f50
  user:        test <[e-mail]>
  date:        Sun Sep 09 01:46:40 2001 +0000
  extra:       branch=default
  extra:       convert_revision=8123727c8361a4117d1a2d80e0c4e7d70c757f18
  description:
  message with extras
  
  

Attempting to convert a banned extra is disallowed

  $ hg convert --config convert.git.extrakeys=tree,parent gitextras hgextras-banned
  initializing destination hgextras-banned repository
  abort: copying of extra key is forbidden: parent, tree
  [255]

Converting a specific extra works

  $ hg convert --config convert.git.extrakeys=extra-1 gitextras hgextras2
  initializing destination hgextras2 repository
  scanning source...
  sorting...
  converting...
  1 initial
  0 message with extras
  updating bookmarks

  $ hg -R hgextras2 log --debug -r 1
  changeset:   1:d40fb205d58597e6ecfd55b16f198be5bf436391
  bookmark:    master
  tag:         tip
  phase:       draft
  parent:      0:dcb68977c55cd02cbd13b901df65c4b6e7b9c4b9
  parent:      -1:0000000000000000000000000000000000000000
  manifest:    0:6a3df4de388f3c4f8e28f4f9a814299a3cbb5f50
  user:        test <[e-mail]>
  date:        Sun Sep 09 01:46:40 2001 +0000
  extra:       branch=default
  extra:       convert_revision=8123727c8361a4117d1a2d80e0c4e7d70c757f18
  extra:       extra-1=extra-1
  description:
  message with extras
  
  

Converting multiple extras works

  $ hg convert --config convert.git.extrakeys=extra-1,extra-2 gitextras hgextras3
  initializing destination hgextras3 repository
  scanning source...
  sorting...
  converting...
  1 initial
  0 message with extras
  updating bookmarks

  $ hg -R hgextras3 log --debug -r 1
  changeset:   1:0105af33379e7b6491501fd34141b7af700fe125
  bookmark:    master
  tag:         tip
  phase:       draft
  parent:      0:dcb68977c55cd02cbd13b901df65c4b6e7b9c4b9
  parent:      -1:0000000000000000000000000000000000000000
  manifest:    0:6a3df4de388f3c4f8e28f4f9a814299a3cbb5f50
  user:        test <[e-mail]>
  date:        Sun Sep 09 01:46:40 2001 +0000
  extra:       branch=default
  extra:       convert_revision=8123727c8361a4117d1a2d80e0c4e7d70c757f18
  extra:       extra-1=extra-1
  extra:       extra-2=extra-2 with space
  description:
  message with extras
  
  

convert.git.saverev can be disabled to prevent convert_revision from being written

  $ hg convert --config convert.git.saverev=false gitextras hgextras4
  initializing destination hgextras4 repository
  scanning source...
  sorting...
  converting...
  1 initial
  0 message with extras
  updating bookmarks

  $ hg -R hgextras4 log --debug -r 1
  changeset:   1:1dcaf4ffe5bee43fa86db2800821f6f0af212c5c
  bookmark:    master
  tag:         tip
  phase:       draft
  parent:      0:a13935fec4daf06a5a87a7307ccb0fc94f98d06d
  parent:      -1:0000000000000000000000000000000000000000
  manifest:    0:6a3df4de388f3c4f8e28f4f9a814299a3cbb5f50
  user:        test <[e-mail]>
  date:        Sun Sep 09 01:46:40 2001 +0000
  extra:       branch=default
  description:
  message with extras
  
  

convert.git.saverev and convert.git.extrakeys can be combined to preserve
convert_revision from source

  $ hg convert --config convert.git.saverev=false --config convert.git.extrakeys=convert_revision gitextras hgextras5
  initializing destination hgextras5 repository
  scanning source...
  sorting...
  converting...
  1 initial
  0 message with extras
  updating bookmarks

  $ hg -R hgextras5 log --debug -r 1
  changeset:   1:574d85931544d4542007664fee3747360e85ee28
  bookmark:    master
  tag:         tip
  phase:       draft
  parent:      0:a13935fec4daf06a5a87a7307ccb0fc94f98d06d
  parent:      -1:0000000000000000000000000000000000000000
  manifest:    0:6a3df4de388f3c4f8e28f4f9a814299a3cbb5f50
  user:        test <[e-mail]>
  date:        Sun Sep 09 01:46:40 2001 +0000
  extra:       branch=default
  extra:       convert_revision=0000aaaabbbbccccddddeeee
  description:
  message with extras