view tests/test-rebase-scenario-global.t @ 42222:57203e0210f8

copies: calculate mergecopies() based on pathcopies()

When copies are stored in changesets, we need a changeset-centric
version of mergecopies() just like we have a changeset-centric version
of pathcopies(). I think the natural way of thinking about
mergecopies() is in terms of pathcopies() from the base to each of the
commits. So if we can rewrite mergecopies() based on two such
pathcopies() calls, we'll get the changeset-centric version for
free. That's what this patch does.

A nice bonus is that it ends up being a lot simpler. mergecopies() has
accumulated a lot of technical debt over time. One good example is the
code for dealing with grafts (the "partial/incomplete/dirty"
stuff). Since pathcopies() already deals with backwards renames and
ping-pong renames, we get that for free.

I've run tests with hard-coded debug logging for "fullcopy" and while
I haven't looked at every difference it produces, all the ones I have
looked at seemed reasonable to me. I'm a little surprised that no more
tests fail when run with '--extra-config-opt
experimental.copies.read-from=compatibility' compared to before this
patch. This patch also fixes the broken cases in test-annotate.t and
test-fastannotate.t. It also enables the part of test-copies.t that
was previously disabled exactly because mergecopies() needed to get a
changeset-centric version.

One drawback of the rewritten code is that we may now make
remotefilelog prefetch more files. We used to prefetch files that were
unique to either side of the merge compared to the other. We now
prefetch files that are unique to either side of the merge compared to
the base. This means that if you added the same file to each side, we
would not prefetch it before, but we would now. Such cases are
probably quite rare, but one likely scenario where they happen is when
moving from a commit to its successor (or the other way around). The
user will probably already have the files in the cache in such cases,
so it's probably not a big deal.

Some timings for calculating mergecopies between two revisions
(revisions shown on each line, all using the common ancestor as base):

In the hg repo:
4.8 4.9: 0.21s -> 0.21s
4.0 4.8: 0.35s -> 0.63s

In and old copy of the mozilla-unified repo:
FIREFOX_BETA_60_BASE^ FIREFOX_BETA_60_BASE: 0.82s -> 0.82s
FIREFOX_NIGHTLY_59_END FIREFOX_BETA_60_BASE: 2.5s -> 2.6s
FIREFOX_BETA_59_END FIREFOX_BETA_60_BASE: 3.9s -> 4.1s
FIREFOX_AURORA_50_BASE FIREFOX_BETA_60_BASE: 31s -> 33s

So it's measurably slower in most cases. The most significant
difference is in the hg repo between revisions 4.0 and 4.8. In that
case it seems to come from the fact that pathcopies() uses
fctx.isintroducedafter() (in _tracefile), while the old mergecopies()
used fctx.linkrev() (in _checkcopies()). That results in a single call
to filectx._adjustlinkrev(), which is responsible for the entire
difference in time (in my repo). So we pay a performance penalty but
we get more correct code (see change in
test-mv-cp-st-diff.t). Deleting the "== f.filenode()" in _tracefile()
recovers the lost performance in the hg repo.

There were are few other optimizations in _checkcopies() that I could
not measure any impact from. One was from the "seen" set. Another was
from a "continue" when the file was not in the destination manifest
(corresponding to "am" in _tracefile).

Also note that merge copies are not calculated when updating with a
clean working copy, which is probably the most common case. I
therefore think the much simpler code is worth the slowdown.

Differential Revision: https://phab.mercurial-scm.org/D6255

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > rebase=
  > drawdag=$TESTDIR/drawdag.py
  > 
  > [phases]
  > publish=False
  > 
  > [alias]
  > tglog = log -G --template "{rev}: {node|short} '{desc}' {branches}\n"
  > EOF


  $ hg init a
  $ cd a
  $ hg unbundle "$TESTDIR/bundles/rebase.hg"
  adding changesets
  adding manifests
  adding file changes
  added 8 changesets with 7 changes to 7 files (+2 heads)
  new changesets cd010b8cd998:02de42196ebe (8 drafts)
  (run 'hg heads' to see heads, 'hg merge' to merge)
  $ hg up tip
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd ..


Rebasing
D onto H - simple rebase:
(this also tests that editor is invoked if '--edit' is specified, and that we
can abort or warn for colliding untracked files)

  $ hg clone -q -u . a a1
  $ cd a1

  $ hg tglog
  @  7: 02de42196ebe 'H'
  |
  | o  6: eea13746799a 'G'
  |/|
  o |  5: 24b6387c8c8c 'F'
  | |
  | o  4: 9520eea781bc 'E'
  |/
  | o  3: 32af7686d403 'D'
  | |
  | o  2: 5fddd98957c8 'C'
  | |
  | o  1: 42ccdea3bb16 'B'
  |/
  o  0: cd010b8cd998 'A'
  

  $ hg status --rev "3^1" --rev 3
  A D
  $ echo collide > D
  $ HGEDITOR=cat hg rebase -s 3 -d 7 --edit --config merge.checkunknown=warn
  rebasing 3:32af7686d403 "D"
  D: replacing untracked file
  D
  
  
  HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  HG: Leave message empty to abort commit.
  HG: --
  HG: user: Nicolas Dumazet <[e-mail]>
  HG: branch 'default'
  HG: added D
  saved backup bundle to $TESTTMP/a1/.hg/strip-backup/32af7686d403-6f7dface-rebase.hg
  $ cat D.orig
  collide
  $ rm D.orig

  $ hg tglog
  o  7: 1619f02ff7dd 'D'
  |
  @  6: 02de42196ebe 'H'
  |
  | o  5: eea13746799a 'G'
  |/|
  o |  4: 24b6387c8c8c 'F'
  | |
  | o  3: 9520eea781bc 'E'
  |/
  | o  2: 5fddd98957c8 'C'
  | |
  | o  1: 42ccdea3bb16 'B'
  |/
  o  0: cd010b8cd998 'A'
  
  $ cd ..


D onto F - intermediate point:
(this also tests that editor is not invoked if '--edit' is not specified, and
that we can ignore for colliding untracked files)

  $ hg clone -q -u . a a2
  $ cd a2
  $ echo collide > D

  $ HGEDITOR=cat hg rebase -s 3 -d 5 --config merge.checkunknown=ignore
  rebasing 3:32af7686d403 "D"
  saved backup bundle to $TESTTMP/a2/.hg/strip-backup/32af7686d403-6f7dface-rebase.hg
  $ cat D.orig
  collide
  $ rm D.orig

  $ hg tglog
  o  7: 2107530e74ab 'D'
  |
  | @  6: 02de42196ebe 'H'
  |/
  | o  5: eea13746799a 'G'
  |/|
  o |  4: 24b6387c8c8c 'F'
  | |
  | o  3: 9520eea781bc 'E'
  |/
  | o  2: 5fddd98957c8 'C'
  | |
  | o  1: 42ccdea3bb16 'B'
  |/
  o  0: cd010b8cd998 'A'
  
  $ cd ..


E onto H - skip of G:
(this also tests that we can overwrite untracked files and don't create backups
if they have the same contents)

  $ hg clone -q -u . a a3
  $ cd a3
  $ hg cat -r 4 E | tee E
  E

  $ hg rebase -s 4 -d 7
  rebasing 4:9520eea781bc "E"
  rebasing 6:eea13746799a "G"
  note: not rebasing 6:eea13746799a "G", its destination already has all its changes
  saved backup bundle to $TESTTMP/a3/.hg/strip-backup/9520eea781bc-fcd8edd4-rebase.hg
  $ f E.orig
  E.orig: file not found

  $ hg tglog
  o  6: 9f8b8ec77260 'E'
  |
  @  5: 02de42196ebe 'H'
  |
  o  4: 24b6387c8c8c 'F'
  |
  | o  3: 32af7686d403 'D'
  | |
  | o  2: 5fddd98957c8 'C'
  | |
  | o  1: 42ccdea3bb16 'B'
  |/
  o  0: cd010b8cd998 'A'
  
  $ cd ..


F onto E - rebase of a branching point (skip G):

  $ hg clone -q -u . a a4
  $ cd a4

  $ hg rebase -s 5 -d 4
  rebasing 5:24b6387c8c8c "F"
  rebasing 6:eea13746799a "G"
  note: not rebasing 6:eea13746799a "G", its destination already has all its changes
  rebasing 7:02de42196ebe "H" (tip)
  saved backup bundle to $TESTTMP/a4/.hg/strip-backup/24b6387c8c8c-c3fe765d-rebase.hg

  $ hg tglog
  @  6: e9240aeaa6ad 'H'
  |
  o  5: 5d0ccadb6e3e 'F'
  |
  o  4: 9520eea781bc 'E'
  |
  | o  3: 32af7686d403 'D'
  | |
  | o  2: 5fddd98957c8 'C'
  | |
  | o  1: 42ccdea3bb16 'B'
  |/
  o  0: cd010b8cd998 'A'
  
  $ cd ..


G onto H - merged revision having a parent in ancestors of target:

  $ hg clone -q -u . a a5
  $ cd a5

  $ hg rebase -s 6 -d 7
  rebasing 6:eea13746799a "G"
  saved backup bundle to $TESTTMP/a5/.hg/strip-backup/eea13746799a-883828ed-rebase.hg

  $ hg tglog
  o    7: 397834907a90 'G'
  |\
  | @  6: 02de42196ebe 'H'
  | |
  | o  5: 24b6387c8c8c 'F'
  | |
  o |  4: 9520eea781bc 'E'
  |/
  | o  3: 32af7686d403 'D'
  | |
  | o  2: 5fddd98957c8 'C'
  | |
  | o  1: 42ccdea3bb16 'B'
  |/
  o  0: cd010b8cd998 'A'
  
  $ cd ..


F onto B - G maintains E as parent:

  $ hg clone -q -u . a a6
  $ cd a6

  $ hg rebase -s 5 -d 1
  rebasing 5:24b6387c8c8c "F"
  rebasing 6:eea13746799a "G"
  rebasing 7:02de42196ebe "H" (tip)
  saved backup bundle to $TESTTMP/a6/.hg/strip-backup/24b6387c8c8c-c3fe765d-rebase.hg

  $ hg tglog
  @  7: c87be72f9641 'H'
  |
  | o  6: 17badd73d4f1 'G'
  |/|
  o |  5: 74fb9ed646c4 'F'
  | |
  | o  4: 9520eea781bc 'E'
  | |
  | | o  3: 32af7686d403 'D'
  | | |
  +---o  2: 5fddd98957c8 'C'
  | |
  o |  1: 42ccdea3bb16 'B'
  |/
  o  0: cd010b8cd998 'A'
  
  $ cd ..


These will fail (using --source):

G onto F - rebase onto an ancestor:

  $ hg clone -q -u . a a7
  $ cd a7

  $ hg rebase -s 6 -d 5
  nothing to rebase
  [1]

F onto G - rebase onto a descendant:

  $ hg rebase -s 5 -d 6
  abort: source and destination form a cycle
  [255]

G onto B - merge revision with both parents not in ancestors of target:

  $ hg rebase -s 6 -d 1
  rebasing 6:eea13746799a "G"
  abort: cannot rebase 6:eea13746799a without moving at least one of its parents
  [255]
  $ hg rebase --abort
  rebase aborted

These will abort gracefully (using --base):

G onto G - rebase onto same changeset:

  $ hg rebase -b 6 -d 6
  nothing to rebase - eea13746799a is both "base" and destination
  [1]

G onto F - rebase onto an ancestor:

  $ hg rebase -b 6 -d 5
  nothing to rebase
  [1]

F onto G - rebase onto a descendant:

  $ hg rebase -b 5 -d 6
  nothing to rebase - "base" 24b6387c8c8c is already an ancestor of destination eea13746799a
  [1]

C onto A - rebase onto an ancestor:

  $ hg rebase -d 0 -s 2
  rebasing 2:5fddd98957c8 "C"
  rebasing 3:32af7686d403 "D"
  saved backup bundle to $TESTTMP/a7/.hg/strip-backup/5fddd98957c8-f9244fa1-rebase.hg
  $ hg tglog
  o  7: c9659aac0000 'D'
  |
  o  6: e1c4361dd923 'C'
  |
  | @  5: 02de42196ebe 'H'
  | |
  | | o  4: eea13746799a 'G'
  | |/|
  | o |  3: 24b6387c8c8c 'F'
  |/ /
  | o  2: 9520eea781bc 'E'
  |/
  | o  1: 42ccdea3bb16 'B'
  |/
  o  0: cd010b8cd998 'A'
  

Check rebasing public changeset

  $ hg pull --config phases.publish=True -q -r 6 . # update phase of 6
  $ hg rebase -d 0 -b 6
  nothing to rebase
  [1]
  $ hg rebase -d 5 -b 6
  abort: can't rebase public changeset e1c4361dd923
  (see 'hg help phases' for details)
  [255]
  $ hg rebase -d 5 -r '1 + (6::)'
  abort: can't rebase public changeset e1c4361dd923
  (see 'hg help phases' for details)
  [255]

  $ hg rebase -d 5 -b 6 --keep
  rebasing 6:e1c4361dd923 "C"
  rebasing 7:c9659aac0000 "D" (tip)

Check rebasing mutable changeset
Source phase greater or equal to destination phase: new changeset get the phase of source:
  $ hg id -n
  5
  $ hg rebase -s9 -d0
  rebasing 9:2b23e52411f4 "D" (tip)
  saved backup bundle to $TESTTMP/a7/.hg/strip-backup/2b23e52411f4-f942decf-rebase.hg
  $ hg id -n # check we updated back to parent
  5
  $ hg log --template "{phase}\n" -r 9
  draft
  $ hg rebase -s9 -d1
  rebasing 9:2cb10d0cfc6c "D" (tip)
  saved backup bundle to $TESTTMP/a7/.hg/strip-backup/2cb10d0cfc6c-ddb0f256-rebase.hg
  $ hg log --template "{phase}\n" -r 9
  draft
  $ hg phase --force --secret 9
  $ hg rebase -s9 -d0
  rebasing 9:c5b12b67163a "D" (tip)
  saved backup bundle to $TESTTMP/a7/.hg/strip-backup/c5b12b67163a-4e372053-rebase.hg
  $ hg log --template "{phase}\n" -r 9
  secret
  $ hg rebase -s9 -d1
  rebasing 9:2a0524f868ac "D" (tip)
  saved backup bundle to $TESTTMP/a7/.hg/strip-backup/2a0524f868ac-cefd8574-rebase.hg
  $ hg log --template "{phase}\n" -r 9
  secret
Source phase lower than destination phase: new changeset get the phase of destination:
  $ hg rebase -s8 -d9
  rebasing 8:6d4f22462821 "C"
  saved backup bundle to $TESTTMP/a7/.hg/strip-backup/6d4f22462821-3441f70b-rebase.hg
  $ hg log --template "{phase}\n" -r 'rev(9)'
  secret

  $ cd ..

Check that temporary bundle doesn't lose phase when not using generaldelta

  $ hg --config format.usegeneraldelta=no init issue5678
  $ cd issue5678
  $ grep generaldelta .hg/requires
  [1]
  $ echo a > a
  $ hg ci -Aqm a
  $ echo b > b
  $ hg ci -Aqm b
  $ hg co -q '.^'
  $ echo c > c
  $ hg ci -Aqm c
  $ hg phase --public
  $ hg log -G -T '{rev}:{node|shortest} {phase} {desc}\n'
  @  2:d36c public c
  |
  | o  1:d2ae draft b
  |/
  o  0:cb9a public a
  
  $ hg rebase -s 1 -d 2
  rebasing 1:d2ae7f538514 "b"
  saved backup bundle to $TESTTMP/issue5678/.hg/strip-backup/d2ae7f538514-2953539b-rebase.hg
  $ hg log -G -T '{rev}:{node|shortest} {phase} {desc}\n'
  o  2:c882 draft b
  |
  @  1:d36c public c
  |
  o  0:cb9a public a
  
  $ cd ..

Test for revset

We need a bit different graph
All destination are B

  $ hg init ah
  $ cd ah
  $ hg unbundle "$TESTDIR/bundles/rebase-revset.hg"
  adding changesets
  adding manifests
  adding file changes
  added 9 changesets with 9 changes to 9 files (+2 heads)
  new changesets 9ae2ed22e576:479ddb54a924 (9 drafts)
  (run 'hg heads' to see heads, 'hg merge' to merge)
  $ hg tglog
  o  8: 479ddb54a924 'I'
  |
  o  7: 72434a4e60b0 'H'
  |
  o  6: 3d8a618087a7 'G'
  |
  | o  5: 41bfcc75ed73 'F'
  | |
  | o  4: c01897464e7f 'E'
  |/
  o  3: ffd453c31098 'D'
  |
  o  2: c9e50f6cdc55 'C'
  |
  | o  1: 8fd0f7e49f53 'B'
  |/
  o  0: 9ae2ed22e576 'A'
  
  $ cd ..


Simple case with keep:

Source on have two descendant heads but ask for one

  $ hg clone -q -u . ah ah1
  $ cd ah1
  $ hg rebase -r '2::8' -d 1
  abort: can't remove original changesets with unrebased descendants
  (use --keep to keep original changesets)
  [255]
  $ hg rebase -r '2::8' -d 1 -k
  rebasing 2:c9e50f6cdc55 "C"
  rebasing 3:ffd453c31098 "D"
  rebasing 6:3d8a618087a7 "G"
  rebasing 7:72434a4e60b0 "H"
  rebasing 8:479ddb54a924 "I" (tip)
  $ hg tglog
  o  13: 9bf1d9358a90 'I'
  |
  o  12: 274623a778d4 'H'
  |
  o  11: ab8c8617c8e8 'G'
  |
  o  10: c8cbf59f70da 'D'
  |
  o  9: 563e4faab485 'C'
  |
  | o  8: 479ddb54a924 'I'
  | |
  | o  7: 72434a4e60b0 'H'
  | |
  | o  6: 3d8a618087a7 'G'
  | |
  | | o  5: 41bfcc75ed73 'F'
  | | |
  | | o  4: c01897464e7f 'E'
  | |/
  | o  3: ffd453c31098 'D'
  | |
  | o  2: c9e50f6cdc55 'C'
  | |
  o |  1: 8fd0f7e49f53 'B'
  |/
  o  0: 9ae2ed22e576 'A'
  

  $ cd ..

Base on have one descendant heads we ask for but common ancestor have two

  $ hg clone -q -u . ah ah2
  $ cd ah2
  $ hg rebase -r '3::8' -d 1
  abort: can't remove original changesets with unrebased descendants
  (use --keep to keep original changesets)
  [255]
  $ hg rebase -r '3::8' -d 1 --keep
  rebasing 3:ffd453c31098 "D"
  rebasing 6:3d8a618087a7 "G"
  rebasing 7:72434a4e60b0 "H"
  rebasing 8:479ddb54a924 "I" (tip)
  $ hg tglog
  o  12: 9d7da0053b1c 'I'
  |
  o  11: 8fbd00952cbc 'H'
  |
  o  10: 51d434a615ee 'G'
  |
  o  9: a9c125634b0b 'D'
  |
  | o  8: 479ddb54a924 'I'
  | |
  | o  7: 72434a4e60b0 'H'
  | |
  | o  6: 3d8a618087a7 'G'
  | |
  | | o  5: 41bfcc75ed73 'F'
  | | |
  | | o  4: c01897464e7f 'E'
  | |/
  | o  3: ffd453c31098 'D'
  | |
  | o  2: c9e50f6cdc55 'C'
  | |
  o |  1: 8fd0f7e49f53 'B'
  |/
  o  0: 9ae2ed22e576 'A'
  

  $ cd ..

rebase subset

  $ hg clone -q -u . ah ah3
  $ cd ah3
  $ hg rebase -r '3::7' -d 1
  abort: can't remove original changesets with unrebased descendants
  (use --keep to keep original changesets)
  [255]
  $ hg rebase -r '3::7' -d 1 --keep
  rebasing 3:ffd453c31098 "D"
  rebasing 6:3d8a618087a7 "G"
  rebasing 7:72434a4e60b0 "H"
  $ hg tglog
  o  11: 8fbd00952cbc 'H'
  |
  o  10: 51d434a615ee 'G'
  |
  o  9: a9c125634b0b 'D'
  |
  | o  8: 479ddb54a924 'I'
  | |
  | o  7: 72434a4e60b0 'H'
  | |
  | o  6: 3d8a618087a7 'G'
  | |
  | | o  5: 41bfcc75ed73 'F'
  | | |
  | | o  4: c01897464e7f 'E'
  | |/
  | o  3: ffd453c31098 'D'
  | |
  | o  2: c9e50f6cdc55 'C'
  | |
  o |  1: 8fd0f7e49f53 'B'
  |/
  o  0: 9ae2ed22e576 'A'
  

  $ cd ..

rebase subset with multiple head

  $ hg clone -q -u . ah ah4
  $ cd ah4
  $ hg rebase -r '3::(7+5)' -d 1
  abort: can't remove original changesets with unrebased descendants
  (use --keep to keep original changesets)
  [255]
  $ hg rebase -r '3::(7+5)' -d 1 --keep
  rebasing 3:ffd453c31098 "D"
  rebasing 4:c01897464e7f "E"
  rebasing 5:41bfcc75ed73 "F"
  rebasing 6:3d8a618087a7 "G"
  rebasing 7:72434a4e60b0 "H"
  $ hg tglog
  o  13: 8fbd00952cbc 'H'
  |
  o  12: 51d434a615ee 'G'
  |
  | o  11: df23d8bda0b7 'F'
  | |
  | o  10: 47b7889448ff 'E'
  |/
  o  9: a9c125634b0b 'D'
  |
  | o  8: 479ddb54a924 'I'
  | |
  | o  7: 72434a4e60b0 'H'
  | |
  | o  6: 3d8a618087a7 'G'
  | |
  | | o  5: 41bfcc75ed73 'F'
  | | |
  | | o  4: c01897464e7f 'E'
  | |/
  | o  3: ffd453c31098 'D'
  | |
  | o  2: c9e50f6cdc55 'C'
  | |
  o |  1: 8fd0f7e49f53 'B'
  |/
  o  0: 9ae2ed22e576 'A'
  

  $ cd ..

More advanced tests

rebase on ancestor with revset

  $ hg clone -q -u . ah ah5
  $ cd ah5
  $ hg rebase -r '6::' -d 2
  rebasing 6:3d8a618087a7 "G"
  rebasing 7:72434a4e60b0 "H"
  rebasing 8:479ddb54a924 "I" (tip)
  saved backup bundle to $TESTTMP/ah5/.hg/strip-backup/3d8a618087a7-b4f73f31-rebase.hg
  $ hg tglog
  o  8: fcb52e68a694 'I'
  |
  o  7: 77bd65cd7600 'H'
  |
  o  6: 12d0e738fb18 'G'
  |
  | o  5: 41bfcc75ed73 'F'
  | |
  | o  4: c01897464e7f 'E'
  | |
  | o  3: ffd453c31098 'D'
  |/
  o  2: c9e50f6cdc55 'C'
  |
  | o  1: 8fd0f7e49f53 'B'
  |/
  o  0: 9ae2ed22e576 'A'
  
  $ cd ..


rebase with multiple root.
We rebase E and G on B
We would expect heads are I, F if it was supported

  $ hg clone -q -u . ah ah6
  $ cd ah6
  $ hg rebase -r '(4+6)::' -d 1
  rebasing 4:c01897464e7f "E"
  rebasing 5:41bfcc75ed73 "F"
  rebasing 6:3d8a618087a7 "G"
  rebasing 7:72434a4e60b0 "H"
  rebasing 8:479ddb54a924 "I" (tip)
  saved backup bundle to $TESTTMP/ah6/.hg/strip-backup/3d8a618087a7-aae93a24-rebase.hg
  $ hg tglog
  o  8: 9136df9a87cf 'I'
  |
  o  7: 23e8f30da832 'H'
  |
  o  6: b0efe8534e8b 'G'
  |
  | o  5: 6eb5b496ab79 'F'
  | |
  | o  4: d15eade9b0b1 'E'
  |/
  | o  3: ffd453c31098 'D'
  | |
  | o  2: c9e50f6cdc55 'C'
  | |
  o |  1: 8fd0f7e49f53 'B'
  |/
  o  0: 9ae2ed22e576 'A'
  
  $ cd ..

More complex rebase with multiple roots
each root have a different common ancestor with the destination and this is a detach

(setup)

  $ hg clone -q -u . a a8
  $ cd a8
  $ echo I > I
  $ hg add I
  $ hg commit -m I
  $ hg up 4
  1 files updated, 0 files merged, 3 files removed, 0 files unresolved
  $ echo I > J
  $ hg add J
  $ hg commit -m J
  created new head
  $ echo I > K
  $ hg add K
  $ hg commit -m K
  $ hg tglog
  @  10: 23a4ace37988 'K'
  |
  o  9: 1301922eeb0c 'J'
  |
  | o  8: e7ec4e813ba6 'I'
  | |
  | o  7: 02de42196ebe 'H'
  | |
  +---o  6: eea13746799a 'G'
  | |/
  | o  5: 24b6387c8c8c 'F'
  | |
  o |  4: 9520eea781bc 'E'
  |/
  | o  3: 32af7686d403 'D'
  | |
  | o  2: 5fddd98957c8 'C'
  | |
  | o  1: 42ccdea3bb16 'B'
  |/
  o  0: cd010b8cd998 'A'
  
(actual test)

  $ hg rebase --dest 'desc(G)' --rev 'desc(K) + desc(I)'
  rebasing 8:e7ec4e813ba6 "I"
  rebasing 10:23a4ace37988 "K" (tip)
  saved backup bundle to $TESTTMP/a8/.hg/strip-backup/23a4ace37988-b06984b3-rebase.hg
  $ hg log --rev 'children(desc(G))'
  changeset:   9:adb617877056
  parent:      6:eea13746799a
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     I
  
  changeset:   10:882431a34a0e
  tag:         tip
  parent:      6:eea13746799a
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     K
  
  $ hg tglog
  @  10: 882431a34a0e 'K'
  |
  | o  9: adb617877056 'I'
  |/
  | o  8: 1301922eeb0c 'J'
  | |
  | | o  7: 02de42196ebe 'H'
  | | |
  o---+  6: eea13746799a 'G'
  |/ /
  | o  5: 24b6387c8c8c 'F'
  | |
  o |  4: 9520eea781bc 'E'
  |/
  | o  3: 32af7686d403 'D'
  | |
  | o  2: 5fddd98957c8 'C'
  | |
  | o  1: 42ccdea3bb16 'B'
  |/
  o  0: cd010b8cd998 'A'
  

Test that rebase is not confused by $CWD disappearing during rebase (issue4121)

  $ cd ..
  $ hg init cwd-vanish
  $ cd cwd-vanish
  $ touch initial-file
  $ hg add initial-file
  $ hg commit -m 'initial commit'
  $ touch dest-file
  $ hg add dest-file
  $ hg commit -m 'dest commit'
  $ hg up 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ touch other-file
  $ hg add other-file
  $ hg commit -m 'first source commit'
  created new head
  $ mkdir subdir
  $ cd subdir
  $ touch subfile
  $ hg add subfile
  $ hg commit -m 'second source with subdir'

  $ hg rebase -b . -d 1 --traceback
  rebasing 2:779a07b1b7a0 "first source commit"
  current directory was removed (rmcwd !)
  (consider changing to repo root: $TESTTMP/cwd-vanish) (rmcwd !)
  rebasing 3:a7d6f3a00bf3 "second source with subdir" (tip)
  saved backup bundle to $TESTTMP/cwd-vanish/.hg/strip-backup/779a07b1b7a0-853e0073-rebase.hg

Get back to the root of cwd-vanish. Note that even though `cd ..`
works on most systems, it does not work on FreeBSD 10, so we use an
absolute path to get back to the repository.
  $ cd $TESTTMP

Test that rebase is done in topo order (issue5370)

  $ hg init order
  $ cd order
  $ touch a && hg add a && hg ci -m A
  $ touch b && hg add b && hg ci -m B
  $ touch c && hg add c && hg ci -m C
  $ hg up 1
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ touch d && hg add d && hg ci -m D
  created new head
  $ hg up 2
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ touch e && hg add e && hg ci -m E
  $ hg up 3
  1 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ touch f && hg add f && hg ci -m F
  $ hg up 0
  0 files updated, 0 files merged, 3 files removed, 0 files unresolved
  $ touch g && hg add g && hg ci -m G
  created new head

  $ hg tglog
  @  6: 124bb27b6f28 'G'
  |
  | o  5: 412b391de760 'F'
  | |
  | | o  4: 82ae8dc7a9b7 'E'
  | | |
  | o |  3: ab709c9f7171 'D'
  | | |
  | | o  2: d84f5cfaaf14 'C'
  | |/
  | o  1: 76035bbd54bd 'B'
  |/
  o  0: 216878401574 'A'
  

  $ hg rebase -s 1 -d 6
  rebasing 1:76035bbd54bd "B"
  rebasing 2:d84f5cfaaf14 "C"
  rebasing 4:82ae8dc7a9b7 "E"
  rebasing 3:ab709c9f7171 "D"
  rebasing 5:412b391de760 "F"
  saved backup bundle to $TESTTMP/order/.hg/strip-backup/76035bbd54bd-e341bc99-rebase.hg

  $ hg tglog
  o  6: 31884cfb735e 'F'
  |
  o  5: 6d89fa5b0909 'D'
  |
  | o  4: de64d97c697b 'E'
  | |
  | o  3: b18e4d2d0aa1 'C'
  |/
  o  2: 0983daf9ff6a 'B'
  |
  @  1: 124bb27b6f28 'G'
  |
  o  0: 216878401574 'A'
  

Test experimental revset
========================

  $ cd ../cwd-vanish

Make the repo a bit more interesting

  $ hg up 1
  0 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ echo aaa > aaa
  $ hg add aaa
  $ hg commit -m aaa
  created new head
  $ hg log -G
  @  changeset:   4:5f7bc9025ed2
  |  tag:         tip
  |  parent:      1:58d79cc1cf43
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     aaa
  |
  | o  changeset:   3:1910d5ff34ea
  | |  user:        test
  | |  date:        Thu Jan 01 00:00:00 1970 +0000
  | |  summary:     second source with subdir
  | |
  | o  changeset:   2:82901330b6ef
  |/   user:        test
  |    date:        Thu Jan 01 00:00:00 1970 +0000
  |    summary:     first source commit
  |
  o  changeset:   1:58d79cc1cf43
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     dest commit
  |
  o  changeset:   0:e94b687f7da3
     user:        test
     date:        Thu Jan 01 00:00:00 1970 +0000
     summary:     initial commit
  

Testing from lower head

  $ hg up 3
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg log -r '_destrebase()'
  changeset:   4:5f7bc9025ed2
  tag:         tip
  parent:      1:58d79cc1cf43
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     aaa
  

Testing from upper head

  $ hg log -r '_destrebase(4)'
  changeset:   3:1910d5ff34ea
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     second source with subdir
  
  $ hg up 4
  1 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ hg log -r '_destrebase()'
  changeset:   3:1910d5ff34ea
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     second source with subdir
  
Testing rebase being called inside another transaction

  $ cd $TESTTMP
  $ hg init tr-state
  $ cd tr-state
  $ cat > $TESTTMP/wraprebase.py <<EOF
  > from __future__ import absolute_import
  > from mercurial import extensions
  > def _rebase(orig, ui, repo, *args, **kwargs):
  >     with repo.wlock():
  >         with repo.lock():
  >             with repo.transaction(b'wrappedrebase'):
  >                 return orig(ui, repo, *args, **kwargs)
  > def wraprebase(loaded):
  >     assert loaded
  >     rebasemod = extensions.find(b'rebase')
  >     extensions.wrapcommand(rebasemod.cmdtable, b'rebase', _rebase)
  > def extsetup(ui):
  >     extensions.afterloaded(b'rebase', wraprebase)
  > EOF

  $ cat >> .hg/hgrc <<EOF
  > [extensions]
  > wraprebase=$TESTTMP/wraprebase.py
  > [experimental]
  > evolution=true
  > EOF

  $ hg debugdrawdag <<'EOS'
  > B C
  > |/
  > A
  > EOS

  $ hg rebase -s C -d B
  rebasing 2:dc0947a82db8 "C" (C tip)

  $ [ -f .hg/rebasestate ] && echo 'WRONG: rebasestate should not exist'
  [1]