revset: drop translation marker from error message of _notpublic()
It is a kind of an internal error. End user won't see it.
# changegroup.py - Mercurial changegroup manipulation functions
#
# Copyright 2006 Matt Mackall <mpm@selenic.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
import weakref
from i18n import _
from node import nullrev, nullid, hex, short
import mdiff, util, dagutil
import struct, os, bz2, zlib, tempfile
import discovery, error, phases, branchmap
_CHANGEGROUPV1_DELTA_HEADER = "20s20s20s20s"
_CHANGEGROUPV2_DELTA_HEADER = "20s20s20s20s20s"
def readexactly(stream, n):
'''read n bytes from stream.read and abort if less was available'''
s = stream.read(n)
if len(s) < n:
raise util.Abort(_("stream ended unexpectedly"
" (got %d bytes, expected %d)")
% (len(s), n))
return s
def getchunk(stream):
"""return the next chunk from stream as a string"""
d = readexactly(stream, 4)
l = struct.unpack(">l", d)[0]
if l <= 4:
if l:
raise util.Abort(_("invalid chunk length %d") % l)
return ""
return readexactly(stream, l - 4)
def chunkheader(length):
"""return a changegroup chunk header (string)"""
return struct.pack(">l", length + 4)
def closechunk():
"""return a changegroup chunk header (string) for a zero-length chunk"""
return struct.pack(">l", 0)
def combineresults(results):
"""logic to combine 0 or more addchangegroup results into one"""
changedheads = 0
result = 1
for ret in results:
# If any changegroup result is 0, return 0
if ret == 0:
result = 0
break
if ret < -1:
changedheads += ret + 1
elif ret > 1:
changedheads += ret - 1
if changedheads > 0:
result = 1 + changedheads
elif changedheads < 0:
result = -1 + changedheads
return result
class nocompress(object):
def compress(self, x):
return x
def flush(self):
return ""
bundletypes = {
"": ("", nocompress), # only when using unbundle on ssh and old http servers
# since the unification ssh accepts a header but there
# is no capability signaling it.
"HG20": (), # special-cased below
"HG10UN": ("HG10UN", nocompress),
"HG10BZ": ("HG10", lambda: bz2.BZ2Compressor()),
"HG10GZ": ("HG10GZ", lambda: zlib.compressobj()),
}
# hgweb uses this list to communicate its preferred type
bundlepriority = ['HG10GZ', 'HG10BZ', 'HG10UN']
def writebundle(ui, cg, filename, bundletype, vfs=None):
"""Write a bundle file and return its filename.
Existing files will not be overwritten.
If no filename is specified, a temporary file is created.
bz2 compression can be turned off.
The bundle file will be deleted in case of errors.
"""
fh = None
cleanup = None
try:
if filename:
if vfs:
fh = vfs.open(filename, "wb")
else:
fh = open(filename, "wb")
else:
fd, filename = tempfile.mkstemp(prefix="hg-bundle-", suffix=".hg")
fh = os.fdopen(fd, "wb")
cleanup = filename
if bundletype == "HG20":
import bundle2
bundle = bundle2.bundle20(ui)
part = bundle.newpart('changegroup', data=cg.getchunks())
part.addparam('version', cg.version)
z = nocompress()
chunkiter = bundle.getchunks()
else:
if cg.version != '01':
raise util.Abort(_('old bundle types only supports v1 '
'changegroups'))
header, compressor = bundletypes[bundletype]
fh.write(header)
z = compressor()
chunkiter = cg.getchunks()
# parse the changegroup data, otherwise we will block
# in case of sshrepo because we don't know the end of the stream
# an empty chunkgroup is the end of the changegroup
# a changegroup has at least 2 chunkgroups (changelog and manifest).
# after that, an empty chunkgroup is the end of the changegroup
for chunk in chunkiter:
fh.write(z.compress(chunk))
fh.write(z.flush())
cleanup = None
return filename
finally:
if fh is not None:
fh.close()
if cleanup is not None:
if filename and vfs:
vfs.unlink(cleanup)
else:
os.unlink(cleanup)
def decompressor(fh, alg):
if alg == 'UN':
return fh
elif alg == 'GZ':
def generator(f):
zd = zlib.decompressobj()
for chunk in util.filechunkiter(f):
yield zd.decompress(chunk)
elif alg == 'BZ':
def generator(f):
zd = bz2.BZ2Decompressor()
zd.decompress("BZ")
for chunk in util.filechunkiter(f, 4096):
yield zd.decompress(chunk)
else:
raise util.Abort("unknown bundle compression '%s'" % alg)
return util.chunkbuffer(generator(fh))
class cg1unpacker(object):
deltaheader = _CHANGEGROUPV1_DELTA_HEADER
deltaheadersize = struct.calcsize(deltaheader)
version = '01'
def __init__(self, fh, alg):
self._stream = decompressor(fh, alg)
self._type = alg
self.callback = None
def compressed(self):
return self._type != 'UN'
def read(self, l):
return self._stream.read(l)
def seek(self, pos):
return self._stream.seek(pos)
def tell(self):
return self._stream.tell()
def close(self):
return self._stream.close()
def chunklength(self):
d = readexactly(self._stream, 4)
l = struct.unpack(">l", d)[0]
if l <= 4:
if l:
raise util.Abort(_("invalid chunk length %d") % l)
return 0
if self.callback:
self.callback()
return l - 4
def changelogheader(self):
"""v10 does not have a changelog header chunk"""
return {}
def manifestheader(self):
"""v10 does not have a manifest header chunk"""
return {}
def filelogheader(self):
"""return the header of the filelogs chunk, v10 only has the filename"""
l = self.chunklength()
if not l:
return {}
fname = readexactly(self._stream, l)
return {'filename': fname}
def _deltaheader(self, headertuple, prevnode):
node, p1, p2, cs = headertuple
if prevnode is None:
deltabase = p1
else:
deltabase = prevnode
return node, p1, p2, deltabase, cs
def deltachunk(self, prevnode):
l = self.chunklength()
if not l:
return {}
headerdata = readexactly(self._stream, self.deltaheadersize)
header = struct.unpack(self.deltaheader, headerdata)
delta = readexactly(self._stream, l - self.deltaheadersize)
node, p1, p2, deltabase, cs = self._deltaheader(header, prevnode)
return {'node': node, 'p1': p1, 'p2': p2, 'cs': cs,
'deltabase': deltabase, 'delta': delta}
def getchunks(self):
"""returns all the chunks contains in the bundle
Used when you need to forward the binary stream to a file or another
network API. To do so, it parse the changegroup data, otherwise it will
block in case of sshrepo because it don't know the end of the stream.
"""
# an empty chunkgroup is the end of the changegroup
# a changegroup has at least 2 chunkgroups (changelog and manifest).
# after that, an empty chunkgroup is the end of the changegroup
empty = False
count = 0
while not empty or count <= 2:
empty = True
count += 1
while True:
chunk = getchunk(self)
if not chunk:
break
empty = False
yield chunkheader(len(chunk))
pos = 0
while pos < len(chunk):
next = pos + 2**20
yield chunk[pos:next]
pos = next
yield closechunk()
class cg2unpacker(cg1unpacker):
deltaheader = _CHANGEGROUPV2_DELTA_HEADER
deltaheadersize = struct.calcsize(deltaheader)
version = '02'
def _deltaheader(self, headertuple, prevnode):
node, p1, p2, deltabase, cs = headertuple
return node, p1, p2, deltabase, cs
class headerlessfixup(object):
def __init__(self, fh, h):
self._h = h
self._fh = fh
def read(self, n):
if self._h:
d, self._h = self._h[:n], self._h[n:]
if len(d) < n:
d += readexactly(self._fh, n - len(d))
return d
return readexactly(self._fh, n)
class cg1packer(object):
deltaheader = _CHANGEGROUPV1_DELTA_HEADER
version = '01'
def __init__(self, repo, bundlecaps=None):
"""Given a source repo, construct a bundler.
bundlecaps is optional and can be used to specify the set of
capabilities which can be used to build the bundle.
"""
# Set of capabilities we can use to build the bundle.
if bundlecaps is None:
bundlecaps = set()
self._bundlecaps = bundlecaps
reorder = repo.ui.config('bundle', 'reorder', 'auto')
if reorder == 'auto':
reorder = None
else:
reorder = util.parsebool(reorder)
self._repo = repo
self._reorder = reorder
self._progress = repo.ui.progress
if self._repo.ui.verbose and not self._repo.ui.debugflag:
self._verbosenote = self._repo.ui.note
else:
self._verbosenote = lambda s: None
def close(self):
return closechunk()
def fileheader(self, fname):
return chunkheader(len(fname)) + fname
def group(self, nodelist, revlog, lookup, units=None):
"""Calculate a delta group, yielding a sequence of changegroup chunks
(strings).
Given a list of changeset revs, return a set of deltas and
metadata corresponding to nodes. The first delta is
first parent(nodelist[0]) -> nodelist[0], the receiver is
guaranteed to have this parent as it has all history before
these changesets. In the case firstparent is nullrev the
changegroup starts with a full revision.
If units is not None, progress detail will be generated, units specifies
the type of revlog that is touched (changelog, manifest, etc.).
"""
# if we don't have any revisions touched by these changesets, bail
if len(nodelist) == 0:
yield self.close()
return
# for generaldelta revlogs, we linearize the revs; this will both be
# much quicker and generate a much smaller bundle
if (revlog._generaldelta and self._reorder is None) or self._reorder:
dag = dagutil.revlogdag(revlog)
revs = set(revlog.rev(n) for n in nodelist)
revs = dag.linearize(revs)
else:
revs = sorted([revlog.rev(n) for n in nodelist])
# add the parent of the first rev
p = revlog.parentrevs(revs[0])[0]
revs.insert(0, p)
# build deltas
total = len(revs) - 1
msgbundling = _('bundling')
for r in xrange(len(revs) - 1):
if units is not None:
self._progress(msgbundling, r + 1, unit=units, total=total)
prev, curr = revs[r], revs[r + 1]
linknode = lookup(revlog.node(curr))
for c in self.revchunk(revlog, curr, prev, linknode):
yield c
if units is not None:
self._progress(msgbundling, None)
yield self.close()
# filter any nodes that claim to be part of the known set
def prune(self, revlog, missing, commonrevs):
rr, rl = revlog.rev, revlog.linkrev
return [n for n in missing if rl(rr(n)) not in commonrevs]
def generate(self, commonrevs, clnodes, fastpathlinkrev, source):
'''yield a sequence of changegroup chunks (strings)'''
repo = self._repo
cl = repo.changelog
ml = repo.manifest
clrevorder = {}
mfs = {} # needed manifests
fnodes = {} # needed file nodes
changedfiles = set()
# Callback for the changelog, used to collect changed files and manifest
# nodes.
# Returns the linkrev node (identity in the changelog case).
def lookupcl(x):
c = cl.read(x)
clrevorder[x] = len(clrevorder)
changedfiles.update(c[3])
# record the first changeset introducing this manifest version
mfs.setdefault(c[0], x)
return x
self._verbosenote(_('uncompressed size of bundle content:\n'))
size = 0
for chunk in self.group(clnodes, cl, lookupcl, units=_('changesets')):
size += len(chunk)
yield chunk
self._verbosenote(_('%8.i (changelog)\n') % size)
# We need to make sure that the linkrev in the changegroup refers to
# the first changeset that introduced the manifest or file revision.
# The fastpath is usually safer than the slowpath, because the filelogs
# are walked in revlog order.
#
# When taking the slowpath with reorder=None and the manifest revlog
# uses generaldelta, the manifest may be walked in the "wrong" order.
# Without 'clrevorder', we would get an incorrect linkrev (see fix in
# cc0ff93d0c0c).
#
# When taking the fastpath, we are only vulnerable to reordering
# of the changelog itself. The changelog never uses generaldelta, so
# it is only reordered when reorder=True. To handle this case, we
# simply take the slowpath, which already has the 'clrevorder' logic.
# This was also fixed in cc0ff93d0c0c.
fastpathlinkrev = fastpathlinkrev and not self._reorder
# Callback for the manifest, used to collect linkrevs for filelog
# revisions.
# Returns the linkrev node (collected in lookupcl).
def lookupmf(x):
clnode = mfs[x]
if not fastpathlinkrev:
mdata = ml.readfast(x)
for f, n in mdata.iteritems():
if f in changedfiles:
# record the first changeset introducing this filelog
# version
fclnodes = fnodes.setdefault(f, {})
fclnode = fclnodes.setdefault(n, clnode)
if clrevorder[clnode] < clrevorder[fclnode]:
fclnodes[n] = clnode
return clnode
mfnodes = self.prune(ml, mfs, commonrevs)
size = 0
for chunk in self.group(mfnodes, ml, lookupmf, units=_('manifests')):
size += len(chunk)
yield chunk
self._verbosenote(_('%8.i (manifests)\n') % size)
mfs.clear()
clrevs = set(cl.rev(x) for x in clnodes)
def linknodes(filerevlog, fname):
if fastpathlinkrev:
llr = filerevlog.linkrev
def genfilenodes():
for r in filerevlog:
linkrev = llr(r)
if linkrev in clrevs:
yield filerevlog.node(r), cl.node(linkrev)
return dict(genfilenodes())
return fnodes.get(fname, {})
for chunk in self.generatefiles(changedfiles, linknodes, commonrevs,
source):
yield chunk
yield self.close()
if clnodes:
repo.hook('outgoing', node=hex(clnodes[0]), source=source)
# The 'source' parameter is useful for extensions
def generatefiles(self, changedfiles, linknodes, commonrevs, source):
repo = self._repo
progress = self._progress
msgbundling = _('bundling')
total = len(changedfiles)
# for progress output
msgfiles = _('files')
for i, fname in enumerate(sorted(changedfiles)):
filerevlog = repo.file(fname)
if not filerevlog:
raise util.Abort(_("empty or missing revlog for %s") % fname)
linkrevnodes = linknodes(filerevlog, fname)
# Lookup for filenodes, we collected the linkrev nodes above in the
# fastpath case and with lookupmf in the slowpath case.
def lookupfilelog(x):
return linkrevnodes[x]
filenodes = self.prune(filerevlog, linkrevnodes, commonrevs)
if filenodes:
progress(msgbundling, i + 1, item=fname, unit=msgfiles,
total=total)
h = self.fileheader(fname)
size = len(h)
yield h
for chunk in self.group(filenodes, filerevlog, lookupfilelog):
size += len(chunk)
yield chunk
self._verbosenote(_('%8.i %s\n') % (size, fname))
progress(msgbundling, None)
def deltaparent(self, revlog, rev, p1, p2, prev):
return prev
def revchunk(self, revlog, rev, prev, linknode):
node = revlog.node(rev)
p1, p2 = revlog.parentrevs(rev)
base = self.deltaparent(revlog, rev, p1, p2, prev)
prefix = ''
if revlog.iscensored(base) or revlog.iscensored(rev):
try:
delta = revlog.revision(node)
except error.CensoredNodeError, e:
delta = e.tombstone
if base == nullrev:
prefix = mdiff.trivialdiffheader(len(delta))
else:
baselen = revlog.rawsize(base)
prefix = mdiff.replacediffheader(baselen, len(delta))
elif base == nullrev:
delta = revlog.revision(node)
prefix = mdiff.trivialdiffheader(len(delta))
else:
delta = revlog.revdiff(base, rev)
p1n, p2n = revlog.parents(node)
basenode = revlog.node(base)
meta = self.builddeltaheader(node, p1n, p2n, basenode, linknode)
meta += prefix
l = len(meta) + len(delta)
yield chunkheader(l)
yield meta
yield delta
def builddeltaheader(self, node, p1n, p2n, basenode, linknode):
# do nothing with basenode, it is implicitly the previous one in HG10
return struct.pack(self.deltaheader, node, p1n, p2n, linknode)
class cg2packer(cg1packer):
version = '02'
deltaheader = _CHANGEGROUPV2_DELTA_HEADER
def __init__(self, repo, bundlecaps=None):
super(cg2packer, self).__init__(repo, bundlecaps)
if self._reorder is None:
# Since generaldelta is directly supported by cg2, reordering
# generally doesn't help, so we disable it by default (treating
# bundle.reorder=auto just like bundle.reorder=False).
self._reorder = False
def deltaparent(self, revlog, rev, p1, p2, prev):
dp = revlog.deltaparent(rev)
# avoid storing full revisions; pick prev in those cases
# also pick prev when we can't be sure remote has dp
if dp == nullrev or (dp != p1 and dp != p2 and dp != prev):
return prev
return dp
def builddeltaheader(self, node, p1n, p2n, basenode, linknode):
return struct.pack(self.deltaheader, node, p1n, p2n, basenode, linknode)
packermap = {'01': (cg1packer, cg1unpacker),
'02': (cg2packer, cg2unpacker)}
def _changegroupinfo(repo, nodes, source):
if repo.ui.verbose or source == 'bundle':
repo.ui.status(_("%d changesets found\n") % len(nodes))
if repo.ui.debugflag:
repo.ui.debug("list of changesets:\n")
for node in nodes:
repo.ui.debug("%s\n" % hex(node))
def getsubsetraw(repo, outgoing, bundler, source, fastpath=False):
repo = repo.unfiltered()
commonrevs = outgoing.common
csets = outgoing.missing
heads = outgoing.missingheads
# We go through the fast path if we get told to, or if all (unfiltered
# heads have been requested (since we then know there all linkrevs will
# be pulled by the client).
heads.sort()
fastpathlinkrev = fastpath or (
repo.filtername is None and heads == sorted(repo.heads()))
repo.hook('preoutgoing', throw=True, source=source)
_changegroupinfo(repo, csets, source)
return bundler.generate(commonrevs, csets, fastpathlinkrev, source)
def getsubset(repo, outgoing, bundler, source, fastpath=False, version='01'):
gengroup = getsubsetraw(repo, outgoing, bundler, source, fastpath)
return packermap[version][1](util.chunkbuffer(gengroup), 'UN')
def changegroupsubset(repo, roots, heads, source, version='01'):
"""Compute a changegroup consisting of all the nodes that are
descendants of any of the roots and ancestors of any of the heads.
Return a chunkbuffer object whose read() method will return
successive changegroup chunks.
It is fairly complex as determining which filenodes and which
manifest nodes need to be included for the changeset to be complete
is non-trivial.
Another wrinkle is doing the reverse, figuring out which changeset in
the changegroup a particular filenode or manifestnode belongs to.
"""
cl = repo.changelog
if not roots:
roots = [nullid]
# TODO: remove call to nodesbetween.
csets, roots, heads = cl.nodesbetween(roots, heads)
discbases = []
for n in roots:
discbases.extend([p for p in cl.parents(n) if p != nullid])
outgoing = discovery.outgoing(cl, discbases, heads)
bundler = packermap[version][0](repo)
return getsubset(repo, outgoing, bundler, source, version=version)
def getlocalchangegroupraw(repo, source, outgoing, bundlecaps=None,
version='01'):
"""Like getbundle, but taking a discovery.outgoing as an argument.
This is only implemented for local repos and reuses potentially
precomputed sets in outgoing. Returns a raw changegroup generator."""
if not outgoing.missing:
return None
bundler = packermap[version][0](repo, bundlecaps)
return getsubsetraw(repo, outgoing, bundler, source)
def getlocalchangegroup(repo, source, outgoing, bundlecaps=None):
"""Like getbundle, but taking a discovery.outgoing as an argument.
This is only implemented for local repos and reuses potentially
precomputed sets in outgoing."""
if not outgoing.missing:
return None
bundler = cg1packer(repo, bundlecaps)
return getsubset(repo, outgoing, bundler, source)
def _computeoutgoing(repo, heads, common):
"""Computes which revs are outgoing given a set of common
and a set of heads.
This is a separate function so extensions can have access to
the logic.
Returns a discovery.outgoing object.
"""
cl = repo.changelog
if common:
hasnode = cl.hasnode
common = [n for n in common if hasnode(n)]
else:
common = [nullid]
if not heads:
heads = cl.heads()
return discovery.outgoing(cl, common, heads)
def getchangegroupraw(repo, source, heads=None, common=None, bundlecaps=None,
version='01'):
"""Like changegroupsubset, but returns the set difference between the
ancestors of heads and the ancestors common.
If heads is None, use the local heads. If common is None, use [nullid].
If version is None, use a version '1' changegroup.
The nodes in common might not all be known locally due to the way the
current discovery protocol works. Returns a raw changegroup generator.
"""
outgoing = _computeoutgoing(repo, heads, common)
return getlocalchangegroupraw(repo, source, outgoing, bundlecaps=bundlecaps,
version=version)
def getchangegroup(repo, source, heads=None, common=None, bundlecaps=None):
"""Like changegroupsubset, but returns the set difference between the
ancestors of heads and the ancestors common.
If heads is None, use the local heads. If common is None, use [nullid].
The nodes in common might not all be known locally due to the way the
current discovery protocol works.
"""
outgoing = _computeoutgoing(repo, heads, common)
return getlocalchangegroup(repo, source, outgoing, bundlecaps=bundlecaps)
def changegroup(repo, basenodes, source):
# to avoid a race we use changegroupsubset() (issue1320)
return changegroupsubset(repo, basenodes, repo.heads(), source)
def addchangegroupfiles(repo, source, revmap, trp, pr, needfiles):
revisions = 0
files = 0
while True:
chunkdata = source.filelogheader()
if not chunkdata:
break
f = chunkdata["filename"]
repo.ui.debug("adding %s revisions\n" % f)
pr()
fl = repo.file(f)
o = len(fl)
try:
if not fl.addgroup(source, revmap, trp):
raise util.Abort(_("received file revlog group is empty"))
except error.CensoredBaseError, e:
raise util.Abort(_("received delta base is censored: %s") % e)
revisions += len(fl) - o
files += 1
if f in needfiles:
needs = needfiles[f]
for new in xrange(o, len(fl)):
n = fl.node(new)
if n in needs:
needs.remove(n)
else:
raise util.Abort(
_("received spurious file revlog entry"))
if not needs:
del needfiles[f]
repo.ui.progress(_('files'), None)
for f, needs in needfiles.iteritems():
fl = repo.file(f)
for n in needs:
try:
fl.rev(n)
except error.LookupError:
raise util.Abort(
_('missing file data for %s:%s - run hg verify') %
(f, hex(n)))
return revisions, files
def addchangegroup(repo, source, srctype, url, emptyok=False,
targetphase=phases.draft):
"""Add the changegroup returned by source.read() to this repo.
srctype is a string like 'push', 'pull', or 'unbundle'. url is
the URL of the repo where this changegroup is coming from.
Return an integer summarizing the change to this repo:
- nothing changed or no source: 0
- more heads than before: 1+added heads (2..n)
- fewer heads than before: -1-removed heads (-2..-n)
- number of heads stays the same: 1
"""
repo = repo.unfiltered()
def csmap(x):
repo.ui.debug("add changeset %s\n" % short(x))
return len(cl)
def revmap(x):
return cl.rev(x)
if not source:
return 0
changesets = files = revisions = 0
efiles = set()
tr = repo.transaction("\n".join([srctype, util.hidepassword(url)]))
# The transaction could have been created before and already carries source
# information. In this case we use the top level data. We overwrite the
# argument because we need to use the top level value (if they exist) in
# this function.
srctype = tr.hookargs.setdefault('source', srctype)
url = tr.hookargs.setdefault('url', url)
# write changelog data to temp files so concurrent readers will not see
# inconsistent view
cl = repo.changelog
cl.delayupdate(tr)
oldheads = cl.heads()
try:
repo.hook('prechangegroup', throw=True, **tr.hookargs)
trp = weakref.proxy(tr)
# pull off the changeset group
repo.ui.status(_("adding changesets\n"))
clstart = len(cl)
class prog(object):
step = _('changesets')
count = 1
ui = repo.ui
total = None
def __call__(repo):
repo.ui.progress(repo.step, repo.count, unit=_('chunks'),
total=repo.total)
repo.count += 1
pr = prog()
source.callback = pr
source.changelogheader()
srccontent = cl.addgroup(source, csmap, trp)
if not (srccontent or emptyok):
raise util.Abort(_("received changelog group is empty"))
clend = len(cl)
changesets = clend - clstart
for c in xrange(clstart, clend):
efiles.update(repo[c].files())
efiles = len(efiles)
repo.ui.progress(_('changesets'), None)
# pull off the manifest group
repo.ui.status(_("adding manifests\n"))
pr.step = _('manifests')
pr.count = 1
pr.total = changesets # manifests <= changesets
# no need to check for empty manifest group here:
# if the result of the merge of 1 and 2 is the same in 3 and 4,
# no new manifest will be created and the manifest group will
# be empty during the pull
source.manifestheader()
repo.manifest.addgroup(source, revmap, trp)
repo.ui.progress(_('manifests'), None)
needfiles = {}
if repo.ui.configbool('server', 'validate', default=False):
# validate incoming csets have their manifests
for cset in xrange(clstart, clend):
mfnode = repo.changelog.read(repo.changelog.node(cset))[0]
mfest = repo.manifest.readdelta(mfnode)
# store file nodes we must see
for f, n in mfest.iteritems():
needfiles.setdefault(f, set()).add(n)
# process the files
repo.ui.status(_("adding file changes\n"))
pr.step = _('files')
pr.count = 1
pr.total = efiles
source.callback = None
newrevs, newfiles = addchangegroupfiles(repo, source, revmap, trp, pr,
needfiles)
revisions += newrevs
files += newfiles
dh = 0
if oldheads:
heads = cl.heads()
dh = len(heads) - len(oldheads)
for h in heads:
if h not in oldheads and repo[h].closesbranch():
dh -= 1
htext = ""
if dh:
htext = _(" (%+d heads)") % dh
repo.ui.status(_("added %d changesets"
" with %d changes to %d files%s\n")
% (changesets, revisions, files, htext))
repo.invalidatevolatilesets()
if changesets > 0:
p = lambda: tr.writepending() and repo.root or ""
if 'node' not in tr.hookargs:
tr.hookargs['node'] = hex(cl.node(clstart))
hookargs = dict(tr.hookargs)
else:
hookargs = dict(tr.hookargs)
hookargs['node'] = hex(cl.node(clstart))
repo.hook('pretxnchangegroup', throw=True, pending=p, **hookargs)
added = [cl.node(r) for r in xrange(clstart, clend)]
publishing = repo.ui.configbool('phases', 'publish', True)
if srctype in ('push', 'serve'):
# Old servers can not push the boundary themselves.
# New servers won't push the boundary if changeset already
# exists locally as secret
#
# We should not use added here but the list of all change in
# the bundle
if publishing:
phases.advanceboundary(repo, tr, phases.public, srccontent)
else:
# Those changesets have been pushed from the outside, their
# phases are going to be pushed alongside. Therefor
# `targetphase` is ignored.
phases.advanceboundary(repo, tr, phases.draft, srccontent)
phases.retractboundary(repo, tr, phases.draft, added)
elif srctype != 'strip':
# publishing only alter behavior during push
#
# strip should not touch boundary at all
phases.retractboundary(repo, tr, targetphase, added)
if changesets > 0:
if srctype != 'strip':
# During strip, branchcache is invalid but coming call to
# `destroyed` will repair it.
# In other case we can safely update cache on disk.
branchmap.updatecache(repo.filtered('served'))
def runhooks():
# These hooks run when the lock releases, not when the
# transaction closes. So it's possible for the changelog
# to have changed since we last saw it.
if clstart >= len(repo):
return
# forcefully update the on-disk branch cache
repo.ui.debug("updating the branch cache\n")
repo.hook("changegroup", **hookargs)
for n in added:
args = hookargs.copy()
args['node'] = hex(n)
repo.hook("incoming", **args)
newheads = [h for h in repo.heads() if h not in oldheads]
repo.ui.log("incoming",
"%s incoming changes - new heads: %s\n",
len(added),
', '.join([hex(c[:6]) for c in newheads]))
tr.addpostclose('changegroup-runhooks-%020i' % clstart,
lambda tr: repo._afterlock(runhooks))
tr.close()
finally:
tr.release()
repo.ui.flush()
# never return 0 here:
if dh < 0:
return dh - 1
else:
return dh + 1