Mercurial > hg
view tests/test-status.t @ 17758:5863f0e4cd3a
histedit: replace various nodes lists with replacement graph (and issue3582)
This changeset rewrites the change tracking logic of histedit to record every
operation it does. Tracked operations record the full list of "old" node that
will eventually be removed to the list of new nodes that replace it. Operations
on temporary nodes are tracked too. Dropped changesets are also recorded as an
"old" node replacement by nothing. This logic is similar to the obsolescence
marker one and will be used for this purpose in later commit.
This new logic implies a big amount of change in the histedit code base.
histedit action functions now always return a tuple of
(new-ctx, [list of rewriting operations])
The old `created`, `replaced` and `tmpnodes` are no longer returned and stored
during histedit operation. When such information is necessary it is computed
from the replacement graph. This computation is done in the `processreplacement`
function.
The `replacemap` is also dropped. It is computed at the end of the command from the
graph. The `bootstrapcontinue` methods are altered to compute this different kind of
information.
This new mechanism requires much less information to be written on disk.
Note:
This changes allows a more accurate bookmark movement. bookmark on dropped
changeset are now move of their parent (or replacement of their parent)
instead of their children.
This fix issue3582
author | Pierre-Yves David <pierre-yves.david@ens-lyon.org> |
---|---|
date | Thu, 11 Oct 2012 08:36:50 +0200 |
parents | a10f7eeb2588 |
children | fcf08023c011 |
line wrap: on
line source
$ hg init repo1 $ cd repo1 $ mkdir a b a/1 b/1 b/2 $ touch in_root a/in_a b/in_b a/1/in_a_1 b/1/in_b_1 b/2/in_b_2 hg status in repo root: $ hg status ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root hg status . in repo root: $ hg status . ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd a ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd a . ? 1/in_a_1 ? in_a $ hg status --cwd a .. ? 1/in_a_1 ? in_a ? ../b/1/in_b_1 ? ../b/2/in_b_2 ? ../b/in_b ? ../in_root $ hg status --cwd b ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd b . ? 1/in_b_1 ? 2/in_b_2 ? in_b $ hg status --cwd b .. ? ../a/1/in_a_1 ? ../a/in_a ? 1/in_b_1 ? 2/in_b_2 ? in_b ? ../in_root $ hg status --cwd a/1 ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd a/1 . ? in_a_1 $ hg status --cwd a/1 .. ? in_a_1 ? ../in_a $ hg status --cwd b/1 ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd b/1 . ? in_b_1 $ hg status --cwd b/1 .. ? in_b_1 ? ../2/in_b_2 ? ../in_b $ hg status --cwd b/2 ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd b/2 . ? in_b_2 $ hg status --cwd b/2 .. ? ../1/in_b_1 ? in_b_2 ? ../in_b $ cd .. $ hg init repo2 $ cd repo2 $ touch modified removed deleted ignored $ echo "^ignored$" > .hgignore $ hg ci -A -m 'initial checkin' adding .hgignore adding deleted adding modified adding removed $ touch modified added unknown ignored $ hg add added $ hg remove removed $ rm deleted hg status: $ hg status A added R removed ! deleted ? unknown hg status modified added removed deleted unknown never-existed ignored: $ hg status modified added removed deleted unknown never-existed ignored never-existed: * (glob) A added R removed ! deleted ? unknown $ hg copy modified copied hg status -C: $ hg status -C A added A copied modified R removed ! deleted ? unknown hg status -A: $ hg status -A A added A copied modified R removed ! deleted ? unknown I ignored C .hgignore C modified $ echo "^ignoreddir$" > .hgignore $ mkdir ignoreddir $ touch ignoreddir/file hg status ignoreddir/file: $ hg status ignoreddir/file hg status -i ignoreddir/file: $ hg status -i ignoreddir/file I ignoreddir/file $ cd .. Check 'status -q' and some combinations $ hg init repo3 $ cd repo3 $ touch modified removed deleted ignored $ echo "^ignored$" > .hgignore $ hg commit -A -m 'initial checkin' adding .hgignore adding deleted adding modified adding removed $ touch added unknown ignored $ hg add added $ echo "test" >> modified $ hg remove removed $ rm deleted $ hg copy modified copied Run status with 2 different flags. Check if result is the same or different. If result is not as expected, raise error $ assert() { > hg status $1 > ../a > hg status $2 > ../b > if diff ../a ../b > /dev/null; then > out=0 > else > out=1 > fi > if [ $3 -eq 0 ]; then > df="same" > else > df="different" > fi > if [ $out -ne $3 ]; then > echo "Error on $1 and $2, should be $df." > fi > } Assert flag1 flag2 [0-same | 1-different] $ assert "-q" "-mard" 0 $ assert "-A" "-marduicC" 0 $ assert "-qA" "-mardcC" 0 $ assert "-qAui" "-A" 0 $ assert "-qAu" "-marducC" 0 $ assert "-qAi" "-mardicC" 0 $ assert "-qu" "-u" 0 $ assert "-q" "-u" 1 $ assert "-m" "-a" 1 $ assert "-r" "-d" 1 $ cd .. $ hg init repo4 $ cd repo4 $ touch modified removed deleted $ hg ci -q -A -m 'initial checkin' $ touch added unknown $ hg add added $ hg remove removed $ rm deleted $ echo x > modified $ hg copy modified copied $ hg ci -m 'test checkin' -d "1000001 0" $ rm * $ touch unrelated $ hg ci -q -A -m 'unrelated checkin' -d "1000002 0" hg status --change 1: $ hg status --change 1 M modified A added A copied R removed hg status --change 1 unrelated: $ hg status --change 1 unrelated hg status -C --change 1 added modified copied removed deleted: $ hg status -C --change 1 added modified copied removed deleted M modified A added A copied modified R removed hg status -A --change 1 and revset: $ hg status -A --change '1|1' M modified A added A copied modified R removed C deleted $ cd .. hg status of binary file starting with '\1\n', a separator for metadata: $ hg init repo5 $ cd repo5 >>> open("010a", "wb").write("\1\nfoo") $ hg ci -q -A -m 'initial checkin' $ hg status -A C 010a >>> open("010a", "wb").write("\1\nbar") $ hg status -A M 010a $ hg ci -q -m 'modify 010a' $ hg status -A --rev 0:1 M 010a $ touch empty $ hg ci -q -A -m 'add another file' $ hg status -A --rev 1:2 010a C 010a $ cd .. test "hg status" with "directory pattern" which matches against files only known on target revision. $ hg init repo6 $ cd repo6 $ echo a > a.txt $ hg add a.txt $ hg commit -m '#0' $ mkdir -p 1/2/3/4/5 $ echo b > 1/2/3/4/5/b.txt $ hg add 1/2/3/4/5/b.txt $ hg commit -m '#1' $ hg update -C 0 > /dev/null $ hg status -A C a.txt the directory matching against specified pattern should be removed, because directory existence prevents 'dirstate.walk()' from showing warning message about such pattern. $ test ! -d 1 $ hg status -A --rev 1 1/2/3/4/5/b.txt R 1/2/3/4/5/b.txt $ hg status -A --rev 1 1/2/3/4/5 R 1/2/3/4/5/b.txt $ hg status -A --rev 1 1/2/3 R 1/2/3/4/5/b.txt $ hg status -A --rev 1 1 R 1/2/3/4/5/b.txt #if windows $ hg --config ui.slash=false status -A --rev 1 1 R 1\2\3\4\5\b.txt #endif $ cd ..