view tests/test-exchange-obsmarkers-case-C2.t @ 48507:58a3be48ddd2

simplemerge: stop merging file flags

As 384df4db6520 (merge: merge file flags together with file content,
2013-01-09) explains, we shouldn't do a 3-way merge of the
symlink. However, since 84614212ae39 (flags: actually merge flags in
simplemerge, 2020-05-16), we do that in
`simplemerge.simplemerge()`. What's more, the merging of the
executable flag there isn't actually necessary; it was made a no-op by
the very next commit, i.e. 4234c9af515d (flags: read flag from
dirstate/disk for workingcopyctx (issue5743), 2020-05-16).

I found the overall flag-merging code (not the bit in
`simplemerge.py`) very hard to follow, but I think I now finally
understand how it works. `mergestate.resolve()` calculates the merged
file flags and sets them on the local side of the merge (confusingly
by calling `_restore_backup()`). Then it calls
`filemerge.filemerge()`, which in turn calls
`simplemerge.simplemerge()` (if premerge is enabled). That means that
the flags on the local side `fcs.flags()` are already correct when the
flag-merging code in `simplemerge.simplemerge()` runs. Interestingly,
that code still works when the local side already has the merged
value, it just doesn't change the value. Here's a truth table to
explain why:

```
BLOMCAR
0000000
0011111
0101011
0111111
1000000
1010000
1100000
1111101
```

B: Base
L: Local
O: Other
M: Merged flags from `mergestate.resolve()`, i.e. what's called "local"
   when we get to `simplemerge.simplemerge()`
C: `commonflags` in `simplemerge.simplemerge()`, i.e. `M & O`
A: `addedflags` in `simplemerge.simplemerge()`, i.e. `(M ^ O) - B`
R: Re-merged flags `simplemerge.simplemerge()`, i.e. `C | A`

As you can see, the re-merged flags are always unchanged compared to
the initial merged flags (R equals M).

Therefore, this patch effectively backs out 84614212ae39. (I might
later refactor this code to have the flags explicitly passed in.)

`simplemerge.simplemerge()` is also called from
`contrib/simplemerge.py`, but that code never passes any flags.

Differential Revision: https://phab.mercurial-scm.org/D11879

============================================
Testing obsolescence markers push: Cases C.2
============================================

Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).

This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.

Category C: advanced case
TestCase 2: Pruned changeset on precursors
Variants:
# a: explicite push
# b: bare push

C.2 Pruned changeset on precursors
==================================

.. {{{
..   B ⊗
..     |
..   A ø⇠◔ A'
..     |/
..     ● O
.. }}}
..
.. Marker exist from:
..
..  * A' succeed to A
..  * B (prune)
..
.. Command run:
..
..  * hg push -r A'
..  * hg push
..
.. Expected exchange:
..
..  * `A ø⇠o A'`
..  * B (prune)

Setup
-----

  $ . $TESTDIR/testlib/exchange-obsmarker-util.sh

Itinial

  $ setuprepos C.2
  creating test repo for test case C.2
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A0
  $ mkcommit B
  $ hg prune -qd '0 0' .
  $ hg update -q 0
  $ mkcommit A1
  created new head
  $ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'`
  1 new obsolescence markers
  obsoleted 1 changesets
  $ hg log -G --hidden
  @  e5ea8f9c7314 (draft): A1
  |
  | x  06055a7959d4 (draft): B
  | |
  | x  28b51eb45704 (draft): A0
  |/
  o  a9bdc8b26820 (public): O
  
  $ inspect_obsmarkers
  obsstore content
  ================
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  $ cd ..
  $ cd ..

  $ cp -R C.2 C.2.a
  $ cp -R C.2 C.2.b

Actual Test (explicit push)
---------------------------

  $ dotest C.2.a A1
  ## Running testcase C.2.a
  # testing echange of "A1" (e5ea8f9c7314)
  ## initial state
  # obstore: main
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "A1" from main to pushdest
  pushing to pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  remote: 2 new obsolescence markers
  ## post push state
  # obstore: main
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling "e5ea8f9c7314" from main into pulldest
  pulling from main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  2 new obsolescence markers
  new changesets e5ea8f9c7314 (1 drafts)
  (run 'hg update' to get a working copy)
  ## post pull state
  # obstore: main
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}

Actual Test (bare push)
-------------------------------------

  $ dotest C.2.b
  ## Running testcase C.2.b
  ## initial state
  # obstore: main
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing from main to pushdest
  pushing to pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  remote: 2 new obsolescence markers
  ## post push state
  # obstore: main
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling from main into pulldest
  pulling from main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  2 new obsolescence markers
  new changesets e5ea8f9c7314 (1 drafts)
  (run 'hg update' to get a working copy)
  ## post pull state
  # obstore: main
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}