view tests/test-import-eol.t @ 48507:58a3be48ddd2

simplemerge: stop merging file flags

As 384df4db6520 (merge: merge file flags together with file content,
2013-01-09) explains, we shouldn't do a 3-way merge of the
symlink. However, since 84614212ae39 (flags: actually merge flags in
simplemerge, 2020-05-16), we do that in
`simplemerge.simplemerge()`. What's more, the merging of the
executable flag there isn't actually necessary; it was made a no-op by
the very next commit, i.e. 4234c9af515d (flags: read flag from
dirstate/disk for workingcopyctx (issue5743), 2020-05-16).

I found the overall flag-merging code (not the bit in
`simplemerge.py`) very hard to follow, but I think I now finally
understand how it works. `mergestate.resolve()` calculates the merged
file flags and sets them on the local side of the merge (confusingly
by calling `_restore_backup()`). Then it calls
`filemerge.filemerge()`, which in turn calls
`simplemerge.simplemerge()` (if premerge is enabled). That means that
the flags on the local side `fcs.flags()` are already correct when the
flag-merging code in `simplemerge.simplemerge()` runs. Interestingly,
that code still works when the local side already has the merged
value, it just doesn't change the value. Here's a truth table to
explain why:

```
BLOMCAR
0000000
0011111
0101011
0111111
1000000
1010000
1100000
1111101
```

B: Base
L: Local
O: Other
M: Merged flags from `mergestate.resolve()`, i.e. what's called "local"
   when we get to `simplemerge.simplemerge()`
C: `commonflags` in `simplemerge.simplemerge()`, i.e. `M & O`
A: `addedflags` in `simplemerge.simplemerge()`, i.e. `(M ^ O) - B`
R: Re-merged flags `simplemerge.simplemerge()`, i.e. `C | A`

As you can see, the re-merged flags are always unchanged compared to
the initial merged flags (R equals M).

Therefore, this patch effectively backs out 84614212ae39. (I might
later refactor this code to have the flags explicitly passed in.)

`simplemerge.simplemerge()` is also called from
`contrib/simplemerge.py`, but that code never passes any flags.

Differential Revision: https://phab.mercurial-scm.org/D11879

  $ cat > makepatch.py <<EOF
  > import sys
  > f = open(sys.argv[2], 'wb')
  > w = f.write
  > w(b'test message\n')
  > w(b'diff --git a/a b/a\n')
  > w(b'--- a/a\n')
  > w(b'+++ b/a\n')
  > w(b'@@ -1,5 +1,5 @@\n')
  > w(b' a\n')
  > w(b'-bbb\r\n')
  > w(b'+yyyy\r\n')
  > w(b' cc\r\n')
  > w({'empty:lf': b' \n',
  >    'empty:crlf': b' \r\n',
  >    'empty:stripped-lf': b'\n',
  >    'empty:stripped-crlf': b'\r\n'}[sys.argv[1]])
  > w(b' d\n')
  > w(b'-e\n')
  > w(b'\\\\ No newline at end of file\n')
  > w(b'+z\r\n')
  > w(b'\\\\ No newline at end of file\r\n')
  > EOF

  $ hg init repo
  $ cd repo
  $ echo '\.diff' > .hgignore


Test different --eol values

  $ "$PYTHON" -c 'open("a", "wb").write(b"a\nbbb\ncc\n\nd\ne")'
  $ hg ci -Am adda
  adding .hgignore
  adding a
  $ "$PYTHON" ../makepatch.py empty:lf eol.diff
  $ "$PYTHON" ../makepatch.py empty:crlf eol-empty-crlf.diff
  $ "$PYTHON" ../makepatch.py empty:stripped-lf eol-empty-stripped-lf.diff
  $ "$PYTHON" ../makepatch.py empty:stripped-crlf eol-empty-stripped-crlf.diff

invalid eol

  $ hg --config patch.eol='LFCR' import eol.diff
  applying eol.diff
  abort: unsupported line endings type: LFCR
  [255]
  $ hg revert -a


force LF

  $ hg --traceback --config patch.eol='LF' import eol.diff
  applying eol.diff
  $ hg id
  9e4ef7b3d4af tip
  $ cat a
  a
  yyyy
  cc
  
  d
  e (no-eol)
  $ hg st

 (test empty-line variants: all of them should generate the same revision)

  $ hg up -qC 0
  $ hg --config patch.eol='LF' import eol-empty-crlf.diff
  applying eol-empty-crlf.diff
  $ hg id
  9e4ef7b3d4af tip

  $ hg up -qC 0
  $ hg --config patch.eol='LF' import eol-empty-stripped-lf.diff
  applying eol-empty-stripped-lf.diff
  $ hg id
  9e4ef7b3d4af tip

  $ hg up -qC 0
  $ hg --config patch.eol='LF' import eol-empty-stripped-crlf.diff
  applying eol-empty-stripped-crlf.diff
  $ hg id
  9e4ef7b3d4af tip

force CRLF

  $ hg up -C 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg --traceback --config patch.eol='CRLF' import eol.diff
  applying eol.diff
  $ cat a
  a\r (esc)
  yyyy\r (esc)
  cc\r (esc)
  \r (esc)
  d\r (esc)
  e (no-eol)
  $ hg st


auto EOL on LF file

  $ hg up -C 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg --traceback --config patch.eol='auto' import eol.diff
  applying eol.diff
  $ cat a
  a
  yyyy
  cc
  
  d
  e (no-eol)
  $ hg st


auto EOL on CRLF file

  $ "$PYTHON" -c 'open("a", "wb").write(b"a\r\nbbb\r\ncc\r\n\r\nd\r\ne")'
  $ hg commit -m 'switch EOLs in a'
  $ hg --traceback --config patch.eol='auto' import eol.diff
  applying eol.diff
  $ cat a
  a\r (esc)
  yyyy\r (esc)
  cc\r (esc)
  \r (esc)
  d\r (esc)
  e (no-eol)
  $ hg st


auto EOL on new file or source without any EOL

  $ "$PYTHON" -c 'open("noeol", "wb").write(b"noeol")'
  $ hg add noeol
  $ hg commit -m 'add noeol'
  $ "$PYTHON" -c 'open("noeol", "wb").write(b"noeol\r\nnoeol\n")'
  $ "$PYTHON" -c 'open("neweol", "wb").write(b"neweol\nneweol\r\n")'
  $ hg add neweol
  $ hg diff --git > noeol.diff
  $ hg revert --no-backup noeol neweol
  $ rm neweol
  $ hg --traceback --config patch.eol='auto' import -m noeol noeol.diff
  applying noeol.diff
  $ cat noeol
  noeol\r (esc)
  noeol
  $ cat neweol
  neweol
  neweol\r (esc)
  $ hg st


Test --eol and binary patches

  $ "$PYTHON" -c 'open("b", "wb").write(b"a\x00\nb\r\nd")'
  $ hg ci -Am addb
  adding b
  $ "$PYTHON" -c 'open("b", "wb").write(b"a\x00\nc\r\nd")'
  $ hg diff --git > bin.diff
  $ hg revert --no-backup b

binary patch with --eol

  $ hg import --config patch.eol='CRLF' -m changeb bin.diff
  applying bin.diff
  $ cat b
  a\x00 (esc)
  c\r (esc)
  d (no-eol)
  $ hg st
  $ cd ..