view tests/test-merge-no-file-change.t @ 48507:58a3be48ddd2

simplemerge: stop merging file flags

As 384df4db6520 (merge: merge file flags together with file content,
2013-01-09) explains, we shouldn't do a 3-way merge of the
symlink. However, since 84614212ae39 (flags: actually merge flags in
simplemerge, 2020-05-16), we do that in
`simplemerge.simplemerge()`. What's more, the merging of the
executable flag there isn't actually necessary; it was made a no-op by
the very next commit, i.e. 4234c9af515d (flags: read flag from
dirstate/disk for workingcopyctx (issue5743), 2020-05-16).

I found the overall flag-merging code (not the bit in
`simplemerge.py`) very hard to follow, but I think I now finally
understand how it works. `mergestate.resolve()` calculates the merged
file flags and sets them on the local side of the merge (confusingly
by calling `_restore_backup()`). Then it calls
`filemerge.filemerge()`, which in turn calls
`simplemerge.simplemerge()` (if premerge is enabled). That means that
the flags on the local side `fcs.flags()` are already correct when the
flag-merging code in `simplemerge.simplemerge()` runs. Interestingly,
that code still works when the local side already has the merged
value, it just doesn't change the value. Here's a truth table to
explain why:

```
BLOMCAR
0000000
0011111
0101011
0111111
1000000
1010000
1100000
1111101
```

B: Base
L: Local
O: Other
M: Merged flags from `mergestate.resolve()`, i.e. what's called "local"
   when we get to `simplemerge.simplemerge()`
C: `commonflags` in `simplemerge.simplemerge()`, i.e. `M & O`
A: `addedflags` in `simplemerge.simplemerge()`, i.e. `(M ^ O) - B`
R: Re-merged flags `simplemerge.simplemerge()`, i.e. `C | A`

As you can see, the re-merged flags are always unchanged compared to
the initial merged flags (R equals M).

Therefore, this patch effectively backs out 84614212ae39. (I might
later refactor this code to have the flags explicitly passed in.)

`simplemerge.simplemerge()` is also called from
`contrib/simplemerge.py`, but that code never passes any flags.

Differential Revision: https://phab.mercurial-scm.org/D11879

  $ cat <<'EOF' >> "$HGRCPATH"
  > [extensions]
  > convert =
  > [templates]
  > l = '{rev}:{node|short} p={p1rev},{p2rev} m={manifest} f={files|json}'
  > EOF

  $ check_convert_identity () {
  >     hg convert -q "$1" "$1.converted"
  >     hg outgoing -q -R "$1.converted" "$1"
  >     if [ "$?" != 1 ]; then
  >         echo '*** BUG: hash changes on convert ***'
  >         hg log -R "$1.converted" -GTl
  >     fi
  > }

Files added at both parents:

  $ hg init added-both
  $ cd added-both
  $ touch a b c
  $ hg ci -qAm0 a
  $ hg ci -qAm1 b
  $ hg up -q 0
  $ hg ci -qAm2 c

  $ hg merge
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci --debug -m merge
  committing files:
  b
  not reusing manifest (no file change in changelog, but manifest differs)
  committing manifest
  committing changelog
  updating the branch cache
  committed changeset 3:7aa8a293f5d97377037afc21e871e036e718d659
  $ hg log -GTl
  @    3:7aa8a293f5d9 p=2,1 m=3:8667461869a1 f=[]
  |\
  | o  2:e0ea47086fce p=0,-1 m=2:b2e5b07f9374 f=["c"]
  | |
  o |  1:64d01526d4c2 p=0,-1 m=1:686dbf0aeca4 f=["b"]
  |/
  o  0:487a0a245cea p=-1,-1 m=0:8515d4bfda76 f=["a"]
  

  $ cd ..
  $ check_convert_identity added-both

Files added at both parents, but the other removed at the merge:
(In this case, ctx.files() after the commit contains the removed file "b", but
its manifest does not differ from p1.)

  $ hg init added-both-removed-at-merge
  $ cd added-both-removed-at-merge
  $ touch a b c
  $ hg ci -qAm0 a
  $ hg ci -qAm1 b
  $ hg up -q 0
  $ hg ci -qAm2 c

  $ hg merge
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg rm -f b
  $ hg ci --debug -m merge
  committing files:
  committing manifest
  committing changelog
  updating the branch cache
  committed changeset 3:915745f3ca3d9d699925269474c2d0a9526e8dfa
  $ hg log -GTl
  @    3:915745f3ca3d p=2,1 m=3:8e9cf3456921 f=["b"]
  |\
  | o  2:e0ea47086fce p=0,-1 m=2:b2e5b07f9374 f=["c"]
  | |
  o |  1:64d01526d4c2 p=0,-1 m=1:686dbf0aeca4 f=["b"]
  |/
  o  0:487a0a245cea p=-1,-1 m=0:8515d4bfda76 f=["a"]
  

  $ cd ..
  $ check_convert_identity added-both

An identical file added at both parents:

  $ hg init added-identical
  $ cd added-identical
  $ touch a b
  $ hg ci -qAm0 a
  $ hg ci -qAm1 b
  $ hg up -q 0
  $ touch b
  $ hg ci -qAm2 b

  $ hg merge
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci --debug -m merge
  reusing manifest from p1 (no file change)
  committing changelog
  updating the branch cache
  committed changeset 3:de26182cd210f0c3fb175ca7616704ab963d3024
  $ hg log -GTl
  @    3:de26182cd210 p=2,1 m=1:686dbf0aeca4 f=[]
  |\
  | o  2:f00991f11eca p=0,-1 m=1:686dbf0aeca4 f=["b"]
  | |
  o |  1:64d01526d4c2 p=0,-1 m=1:686dbf0aeca4 f=["b"]
  |/
  o  0:487a0a245cea p=-1,-1 m=0:8515d4bfda76 f=["a"]
  

  $ cd ..
  $ check_convert_identity added-identical

#if execbit

An identical file added at both parents, but the flag differs. Take local:

  $ hg init flag-change-take-p1
  $ cd flag-change-take-p1
  $ touch a b
  $ hg ci -qAm0 a
  $ hg ci -qAm1 b
  $ hg up -q 0
  $ touch b
  $ chmod +x b
  $ hg ci -qAm2 b

  $ hg merge
  warning: cannot merge flags for b without common ancestor - keeping local flags
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ chmod +x b
  $ hg ci --debug -m merge
  committing files:
  b
  reusing manifest from p1 (listed files actually unchanged)
  committing changelog
  updating the branch cache
  committed changeset 3:c8d50407916ef8a5a97cb6e36ca9bc844a6ee13e
  $ hg log -GTl
  @    3:c8d50407916e p=2,1 m=2:36b69ba4b24b f=[]
  |\
  | o  2:99451f16b3f5 p=0,-1 m=2:36b69ba4b24b f=["b"]
  | |
  o |  1:64d01526d4c2 p=0,-1 m=1:686dbf0aeca4 f=["b"]
  |/
  o  0:487a0a245cea p=-1,-1 m=0:8515d4bfda76 f=["a"]
  
  $ hg files -vr3
           0   a
           0 x b

  $ cd ..
  $ check_convert_identity flag-change-take-p1

An identical file added at both parents, but the flag differs. Take other:

  $ hg init flag-change-take-p2
  $ cd flag-change-take-p2
  $ touch a b
  $ hg ci -qAm0 a
  $ hg ci -qAm1 b
  $ hg up -q 0
  $ touch b
  $ chmod +x b
  $ hg ci -qAm2 b

  $ hg merge
  warning: cannot merge flags for b without common ancestor - keeping local flags
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ chmod -x b
  $ hg ci --debug -m merge
  committing files:
  b
  committing manifest
  committing changelog
  updating the branch cache
  committed changeset 3:06a62a687d87c7d8944743dee1ee9d8c66b3f6e3
  $ hg log -GTl
  @    3:06a62a687d87 p=2,1 m=3:2a315ba1aa45 f=["b"]
  |\
  | o  2:99451f16b3f5 p=0,-1 m=2:36b69ba4b24b f=["b"]
  | |
  o |  1:64d01526d4c2 p=0,-1 m=1:686dbf0aeca4 f=["b"]
  |/
  o  0:487a0a245cea p=-1,-1 m=0:8515d4bfda76 f=["a"]
  
  $ hg files -vr3
           0   a
           0   b

  $ cd ..
  $ check_convert_identity flag-change-take-p2

#endif

An identical file added at both parents, one more file added at p2:

  $ hg init added-some-p2
  $ cd added-some-p2
  $ touch a b c
  $ hg ci -qAm0 a
  $ hg ci -qAm1 b
  $ hg ci -qAm2 c
  $ hg up -q 0
  $ touch b
  $ hg ci -qAm3 b

  $ hg merge
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci --debug -m merge
  committing files:
  c
  not reusing manifest (no file change in changelog, but manifest differs)
  committing manifest
  committing changelog
  updating the branch cache
  committed changeset 4:f7fbc4e4d9a8fde03ba475adad675578c8bf472d
  $ hg log -GTl
  @    4:f7fbc4e4d9a8 p=3,2 m=3:92acd5bfd716 f=[]
  |\
  | o  3:e9d9f3cc981f p=0,-1 m=1:686dbf0aeca4 f=["b"]
  | |
  o |  2:93c5529a4ec7 p=1,-1 m=2:ae25a31b30b3 f=["c"]
  | |
  o |  1:64d01526d4c2 p=0,-1 m=1:686dbf0aeca4 f=["b"]
  |/
  o  0:487a0a245cea p=-1,-1 m=0:8515d4bfda76 f=["a"]
  

  $ cd ..
  $ check_convert_identity added-some-p2

An identical file added at both parents, one more file added at p1:
(In this case, p1 manifest is reused at the merge commit, which means the
manifest DAG does not have the same shape as the changelog.)

  $ hg init added-some-p1
  $ cd added-some-p1
  $ touch a b
  $ hg ci -qAm0 a
  $ hg ci -qAm1 b
  $ hg up -q 0
  $ touch b c
  $ hg ci -qAm2 b
  $ hg ci -qAm3 c

  $ hg merge
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci --debug -m merge
  reusing manifest from p1 (no file change)
  committing changelog
  updating the branch cache
  committed changeset 4:a9f0f589a913f5a149dc10dfbd5af726977c36c4
  $ hg log -GTl
  @    4:a9f0f589a913 p=3,1 m=2:ae25a31b30b3 f=[]
  |\
  | o  3:b8dc385241b5 p=2,-1 m=2:ae25a31b30b3 f=["c"]
  | |
  | o  2:f00991f11eca p=0,-1 m=1:686dbf0aeca4 f=["b"]
  | |
  o |  1:64d01526d4c2 p=0,-1 m=1:686dbf0aeca4 f=["b"]
  |/
  o  0:487a0a245cea p=-1,-1 m=0:8515d4bfda76 f=["a"]
  

  $ cd ..
  $ check_convert_identity added-some-p1

A file added at p2, a named branch created at p1:

  $ hg init named-branch-p1
  $ cd named-branch-p1
  $ touch a b
  $ hg ci -qAm0 a
  $ hg ci -qAm1 b
  $ hg up -q 0
  $ hg branch -q foo
  $ hg ci -m2

  $ hg merge default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci --debug -m merge
  committing files:
  b
  not reusing manifest (no file change in changelog, but manifest differs)
  committing manifest
  committing changelog
  updating the branch cache
  committed changeset 3:fb97d83b02fd072295cfc2171f21b7d38509bfd7
  $ hg log -GT'{l} branch={branch}'
  @    3:fb97d83b02fd p=2,1 m=2:9091c64f4ea1 f=[] branch=foo
  |\
  | o  2:a3a9fa6587e5 p=0,-1 m=0:8515d4bfda76 f=[] branch=foo
  | |
  o |  1:64d01526d4c2 p=0,-1 m=1:686dbf0aeca4 f=["b"] branch=default
  |/
  o  0:487a0a245cea p=-1,-1 m=0:8515d4bfda76 f=["a"] branch=default
  

  $ cd ..
  $ check_convert_identity named-branch-p1

A file added at p1, a named branch created at p2:
(In this case, p1 manifest is reused at the merge commit, which means the
manifest DAG does not have the same shape as the changelog.)

  $ hg init named-branch-p2
  $ cd named-branch-p2
  $ touch a b
  $ hg ci -qAm0 a
  $ hg branch -q foo
  $ hg ci -m1
  $ hg up -q 0
  $ hg ci -qAm1 b

  $ hg merge foo
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci --debug -m merge
  reusing manifest from p1 (no file change)
  committing changelog
  updating the branch cache
  committed changeset 3:036823e24692218324d4af43b07ff89f8a000096
  $ hg log -GT'{l} branch={branch}'
  @    3:036823e24692 p=2,1 m=1:686dbf0aeca4 f=[] branch=default
  |\
  | o  2:64d01526d4c2 p=0,-1 m=1:686dbf0aeca4 f=["b"] branch=default
  | |
  o |  1:da38c8e00727 p=0,-1 m=0:8515d4bfda76 f=[] branch=foo
  |/
  o  0:487a0a245cea p=-1,-1 m=0:8515d4bfda76 f=["a"] branch=default
  

  $ cd ..
  $ check_convert_identity named-branch-p2

A file changed once at both parents, but amended to have identical content:

  $ hg init amend-p1
  $ cd amend-p1
  $ touch a
  $ hg ci -qAm0 a
  $ echo foo > a
  $ hg ci -m1
  $ hg up -q 0
  $ echo bar > a
  $ hg ci -qm2
  $ echo foo > a
  $ hg ci -qm3 --amend

  $ hg merge
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci --debug -m merge
  reusing manifest from p1 (no file change)
  committing changelog
  updating the branch cache
  committed changeset 3:314e5bc5adf5c58ea571efabe33eedba20a201aa
  $ hg log -GT'{l} branch={branch}'
  @    3:314e5bc5adf5 p=2,1 m=1:d33ea248bd73 f=[] branch=default
  |\
  | o  2:de9c64f226a3 p=0,-1 m=1:d33ea248bd73 f=["a"] branch=default
  | |
  o |  1:6a74aec01b3c p=0,-1 m=1:d33ea248bd73 f=["a"] branch=default
  |/
  o  0:487a0a245cea p=-1,-1 m=0:8515d4bfda76 f=["a"] branch=default
  

  $ cd ..
  $ check_convert_identity amend-p1