view tests/test-push.t @ 48507:58a3be48ddd2

simplemerge: stop merging file flags

As 384df4db6520 (merge: merge file flags together with file content,
2013-01-09) explains, we shouldn't do a 3-way merge of the
symlink. However, since 84614212ae39 (flags: actually merge flags in
simplemerge, 2020-05-16), we do that in
`simplemerge.simplemerge()`. What's more, the merging of the
executable flag there isn't actually necessary; it was made a no-op by
the very next commit, i.e. 4234c9af515d (flags: read flag from
dirstate/disk for workingcopyctx (issue5743), 2020-05-16).

I found the overall flag-merging code (not the bit in
`simplemerge.py`) very hard to follow, but I think I now finally
understand how it works. `mergestate.resolve()` calculates the merged
file flags and sets them on the local side of the merge (confusingly
by calling `_restore_backup()`). Then it calls
`filemerge.filemerge()`, which in turn calls
`simplemerge.simplemerge()` (if premerge is enabled). That means that
the flags on the local side `fcs.flags()` are already correct when the
flag-merging code in `simplemerge.simplemerge()` runs. Interestingly,
that code still works when the local side already has the merged
value, it just doesn't change the value. Here's a truth table to
explain why:

```
BLOMCAR
0000000
0011111
0101011
0111111
1000000
1010000
1100000
1111101
```

B: Base
L: Local
O: Other
M: Merged flags from `mergestate.resolve()`, i.e. what's called "local"
   when we get to `simplemerge.simplemerge()`
C: `commonflags` in `simplemerge.simplemerge()`, i.e. `M & O`
A: `addedflags` in `simplemerge.simplemerge()`, i.e. `(M ^ O) - B`
R: Re-merged flags `simplemerge.simplemerge()`, i.e. `C | A`

As you can see, the re-merged flags are always unchanged compared to
the initial merged flags (R equals M).

Therefore, this patch effectively backs out 84614212ae39. (I might
later refactor this code to have the flags explicitly passed in.)

`simplemerge.simplemerge()` is also called from
`contrib/simplemerge.py`, but that code never passes any flags.

Differential Revision: https://phab.mercurial-scm.org/D11879

==================================
Basic testing for the push command
==================================

Testing of the '--rev' flag
===========================

  $ hg init test-revflag
  $ hg -R test-revflag unbundle "$TESTDIR/bundles/remote.hg"
  adding changesets
  adding manifests
  adding file changes
  added 9 changesets with 7 changes to 4 files (+1 heads)
  new changesets bfaf4b5cbf01:916f1afdef90 (9 drafts)
  (run 'hg heads' to see heads, 'hg merge' to merge)

  $ for i in 0 1 2 3 4 5 6 7 8; do
  >    echo
  >    hg init test-revflag-"$i"
  >    hg -R test-revflag push -r "$i" test-revflag-"$i"
  >    hg -R test-revflag-"$i" verify
  > done
  
  pushing to test-revflag-0
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 1 changesets with 1 changes to 1 files
  
  pushing to test-revflag-1
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 2 changesets with 2 changes to 1 files
  
  pushing to test-revflag-2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 3 changesets with 3 changes to 1 files
  
  pushing to test-revflag-3
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 4 changes to 1 files
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 4 changesets with 4 changes to 1 files
  
  pushing to test-revflag-4
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 2 changesets with 2 changes to 1 files
  
  pushing to test-revflag-5
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 3 changesets with 3 changes to 1 files
  
  pushing to test-revflag-6
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 5 changes to 2 files
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 4 changesets with 5 changes to 2 files
  
  pushing to test-revflag-7
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 5 changesets with 6 changes to 3 files
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 5 changesets with 6 changes to 3 files
  
  pushing to test-revflag-8
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 5 changesets with 5 changes to 2 files
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 5 changesets with 5 changes to 2 files

  $ cd test-revflag-8

  $ hg pull ../test-revflag-7
  pulling from ../test-revflag-7
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 2 changes to 3 files (+1 heads)
  new changesets c70afb1ee985:faa2e4234c7a
  (run 'hg heads' to see heads, 'hg merge' to merge)

  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 9 changesets with 7 changes to 4 files

  $ cd ..

Test server side validation during push
=======================================

  $ hg init test-validation
  $ cd test-validation

  $ cat > .hg/hgrc <<EOF
  > [server]
  > validate=1
  > EOF

  $ echo alpha > alpha
  $ echo beta > beta
  $ hg addr
  adding alpha
  adding beta
  $ hg ci -m 1

  $ cd ..
  $ hg clone test-validation test-validation-clone
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

#if reporevlogstore

Test spurious filelog entries:

  $ cd test-validation-clone
  $ echo blah >> beta
  $ cp .hg/store/data/beta.i tmp1
  $ hg ci -m 2
  $ cp .hg/store/data/beta.i tmp2
  $ hg -q rollback
  $ mv tmp2 .hg/store/data/beta.i
  $ echo blah >> beta
  $ hg ci -m '2 (corrupt)'

Expected to fail:

  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
   beta@1: dddc47b3ba30 not in manifests
  checked 2 changesets with 4 changes to 2 files
  1 integrity errors encountered!
  (first damaged changeset appears to be 1)
  [1]

  $ hg push
  pushing to $TESTTMP/test-validation
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  transaction abort!
  rollback completed
  abort: received spurious file revlog entry
  [255]

  $ hg -q rollback
  $ mv tmp1 .hg/store/data/beta.i
  $ echo beta > beta

Test missing filelog entries:

  $ cp .hg/store/data/beta.i tmp
  $ echo blah >> beta
  $ hg ci -m '2 (corrupt)'
  $ mv tmp .hg/store/data/beta.i

Expected to fail:

  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
   beta@1: manifest refers to unknown revision dddc47b3ba30
  checked 2 changesets with 2 changes to 2 files
  1 integrity errors encountered!
  (first damaged changeset appears to be 1)
  [1]

  $ hg push
  pushing to $TESTTMP/test-validation
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  transaction abort!
  rollback completed
  abort: missing file data for beta:dddc47b3ba30e54484720ce0f4f768a0f4b6efb9 - run hg verify
  [255]

  $ cd ..

#endif

Test push hook locking
=====================

  $ hg init 1

  $ echo '[ui]' >> 1/.hg/hgrc
  $ echo 'timeout = 10' >> 1/.hg/hgrc

  $ echo foo > 1/foo
  $ hg --cwd 1 ci -A -m foo
  adding foo

  $ hg clone 1 2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg clone 2 3
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cat <<EOF > $TESTTMP/debuglocks-pretxn-hook.sh
  > hg debuglocks
  > true
  > EOF
  $ echo '[hooks]' >> 2/.hg/hgrc
  $ echo "pretxnchangegroup.a = sh $TESTTMP/debuglocks-pretxn-hook.sh" >> 2/.hg/hgrc
  $ echo 'changegroup.push = hg push -qf ../1' >> 2/.hg/hgrc

  $ echo bar >> 3/foo
  $ hg --cwd 3 ci -m bar

  $ hg --cwd 3 push ../2 --config devel.legacy.exchange=bundle1
  pushing to ../2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  lock:  user *, process * (*s) (glob)
  wlock: free
  added 1 changesets with 1 changes to 1 files

  $ hg --cwd 1 --config extensions.strip= strip tip -q
  $ hg --cwd 2 --config extensions.strip= strip tip -q
  $ hg --cwd 3 push ../2 # bundle2+
  pushing to ../2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  lock:  user *, process * (*s) (glob)
  wlock: user *, process * (*s) (glob)
  added 1 changesets with 1 changes to 1 files

Test bare push with multiple race checking options
--------------------------------------------------

  $ hg init test-bare-push-no-concurrency
  $ hg init test-bare-push-unrelated-concurrency
  $ hg -R test-revflag push -r 0 test-bare-push-no-concurrency --config server.concurrent-push-mode=strict
  pushing to test-bare-push-no-concurrency
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  $ hg -R test-revflag push -r 0 test-bare-push-unrelated-concurrency --config server.concurrent-push-mode=check-related
  pushing to test-bare-push-unrelated-concurrency
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files

SEC: check for unsafe ssh url

  $ cat >> $HGRCPATH << EOF
  > [ui]
  > ssh = sh -c "read l; read l; read l"
  > EOF

  $ hg -R test-revflag push 'ssh://-oProxyCommand=touch${IFS}owned/path'
  pushing to ssh://-oProxyCommand%3Dtouch%24%7BIFS%7Downed/path
  abort: potentially unsafe url: 'ssh://-oProxyCommand=touch${IFS}owned/path'
  [255]
  $ hg -R test-revflag push 'ssh://%2DoProxyCommand=touch${IFS}owned/path'
  pushing to ssh://-oProxyCommand%3Dtouch%24%7BIFS%7Downed/path
  abort: potentially unsafe url: 'ssh://-oProxyCommand=touch${IFS}owned/path'
  [255]
  $ hg -R test-revflag push 'ssh://fakehost|touch${IFS}owned/path'
  pushing to ssh://fakehost%7Ctouch%24%7BIFS%7Downed/path
  abort: no suitable response from remote hg
  [255]
  $ hg -R test-revflag push 'ssh://fakehost%7Ctouch%20owned/path'
  pushing to ssh://fakehost%7Ctouch%20owned/path
  abort: no suitable response from remote hg
  [255]

  $ [ ! -f owned ] || echo 'you got owned'

Test `commands.push.require-revs`
---------------------------------

  $ hg clone -q test-revflag test-require-revs-source
  $ hg init test-require-revs-dest
  $ cd test-require-revs-source
  $ cat >> .hg/hgrc << EOF
  > [paths]
  > default = ../test-require-revs-dest
  > [commands]
  > push.require-revs=1
  > EOF
  $ hg push
  pushing to $TESTTMP/test-require-revs-dest
  abort: no revisions specified to push
  (did you mean "hg push -r ."?)
  [10]
  $ hg push -r 0
  pushing to $TESTTMP/test-require-revs-dest
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  $ hg bookmark -r 0 push-this-bookmark
(test that -B (bookmark) works for specifying "revs")
  $ hg push -B push-this-bookmark
  pushing to $TESTTMP/test-require-revs-dest
  searching for changes
  no changes found
  exporting bookmark push-this-bookmark
  [1]
(test that -b (branch)  works for specifying "revs")
  $ hg push -b default
  pushing to $TESTTMP/test-require-revs-dest
  searching for changes
  abort: push creates new remote head [0-9a-f]+ (re)
  (merge or see 'hg help push' for details about pushing new heads)
  [20]
(demonstrate that even though we don't have anything to exchange, we're still
showing the error)
  $ hg push
  pushing to $TESTTMP/test-require-revs-dest
  abort: no revisions specified to push
  (did you mean "hg push -r ."?)
  [10]
  $ hg push --config paths.default:pushrev=0
  pushing to $TESTTMP/test-require-revs-dest
  searching for changes
  no changes found
  [1]