mergestate: determine if active without looking for state files on disk
I couldn't think of a reason that we need to check state files on disk
to determine if a merge is active. I could imagine them being for
there for detecting broken state files that would then be cleaned up
by some later command, but we always delete the entire `.hg/merge/`
tree, so that doesn't seem to be it.
The checks were added in
4e932dc5c113 (resolve: abort when not
applicable (BC), 2014-04-18). Perhaps there were needed for that and
then made obsolete by
6062593d8b06 (resolve: don't abort resolve -l
even when no merge is in progress, 2014-05-23).
The reason I want to delete the checks is that I think `ms =
mergestate.read(repo); ms.active() and ms.local` should be a valid
pattern, but it crashes when the merge state file is an empty file if
we consider mere presence of the file as "active".
Differential Revision: https://phab.mercurial-scm.org/D8118
$ echo "[extensions]" >> $HGRCPATH
$ echo "share = " >> $HGRCPATH
prepare repo1
$ hg init repo1
$ cd repo1
$ echo a > a
$ hg commit -A -m'init'
adding a
share it
$ cd ..
$ hg share repo1 repo2
updating working directory
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
share shouldn't have a store dir
$ cd repo2
$ test -d .hg/store
[1]
$ hg root -Tjson | sed 's|\\\\|\\|g'
[
{
"hgpath": "$TESTTMP/repo2/.hg",
"reporoot": "$TESTTMP/repo2",
"storepath": "$TESTTMP/repo1/.hg/store"
}
]
share shouldn't have a full cache dir, original repo should
$ hg branches
default 0:d3873e73d99e
$ hg tags
tip 0:d3873e73d99e
$ test -d .hg/cache
[1]
$ ls -1 .hg/wcache || true
checkisexec (execbit !)
checklink (symlink !)
checklink-target (symlink !)
manifestfulltextcache (reporevlogstore !)
$ ls -1 ../repo1/.hg/cache
branch2-served
rbc-names-v1
rbc-revs-v1
tags2-visible
Some sed versions appends newline, some don't, and some just fails
$ cat .hg/sharedpath; echo
$TESTTMP/repo1/.hg
trailing newline on .hg/sharedpath is ok
$ hg tip -q
0:d3873e73d99e
$ echo '' >> .hg/sharedpath
$ cat .hg/sharedpath
$TESTTMP/repo1/.hg
$ hg tip -q
0:d3873e73d99e
commit in shared clone
$ echo a >> a
$ hg commit -m'change in shared clone'
check original
$ cd ../repo1
$ hg log
changeset: 1:8af4dc49db9e
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: change in shared clone
changeset: 0:d3873e73d99e
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: init
$ hg update
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cat a # should be two lines of "a"
a
a
commit in original
$ echo b > b
$ hg commit -A -m'another file'
adding b
check in shared clone
$ cd ../repo2
$ hg log
changeset: 2:c2e0ac586386
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: another file
changeset: 1:8af4dc49db9e
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: change in shared clone
changeset: 0:d3873e73d99e
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: init
$ hg update
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cat b # should exist with one "b"
b
hg serve shared clone
$ hg serve -n test -p $HGPORT -d --pid-file=hg.pid
$ cat hg.pid >> $DAEMON_PIDS
$ get-with-headers.py localhost:$HGPORT 'raw-file/'
200 Script output follows
-rw-r--r-- 4 a
-rw-r--r-- 2 b
Cloning a shared repo via bundle2 results in a non-shared clone
$ cd ..
$ hg clone -q --stream --config ui.ssh="\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/`pwd`/repo2 cloned-via-bundle2
$ cat ./cloned-via-bundle2/.hg/requires | grep "shared"
[1]
$ hg id --cwd cloned-via-bundle2 -r tip
c2e0ac586386 tip
$ cd repo2
test unshare command
$ hg unshare
$ test -d .hg/store
$ test -f .hg/sharedpath
[1]
$ grep shared .hg/requires
[1]
$ hg unshare
abort: this is not a shared repo
[255]
check that a change does not propagate
$ echo b >> b
$ hg commit -m'change in unshared'
$ cd ../repo1
$ hg id -r tip
c2e0ac586386 tip
$ cd ..
non largefiles repos won't enable largefiles
$ hg share --config extensions.largefiles= repo2 sharedrepo
The fsmonitor extension is incompatible with the largefiles extension and has been disabled. (fsmonitor !)
The fsmonitor extension is incompatible with the largefiles extension and has been disabled. (fsmonitor !)
updating working directory
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ [ -f sharedrepo/.hg/hgrc ]
[1]
test shared clones using relative paths work
$ mkdir thisdir
$ hg init thisdir/orig
$ hg share -U thisdir/orig thisdir/abs
$ hg share -U --relative thisdir/abs thisdir/rel
$ cat thisdir/rel/.hg/sharedpath
../../orig/.hg (no-eol)
$ grep shared thisdir/*/.hg/requires
thisdir/abs/.hg/requires:shared
thisdir/rel/.hg/requires:relshared
thisdir/rel/.hg/requires:shared
test that relative shared paths aren't relative to $PWD
$ cd thisdir
$ hg -R rel root
$TESTTMP/thisdir/rel
$ cd ..
now test that relative paths really are relative, survive across
renames and changes of PWD
$ hg -R thisdir/abs root
$TESTTMP/thisdir/abs
$ hg -R thisdir/rel root
$TESTTMP/thisdir/rel
$ mv thisdir thatdir
$ hg -R thatdir/abs root
abort: .hg/sharedpath points to nonexistent directory $TESTTMP/thisdir/orig/.hg!
[255]
$ hg -R thatdir/rel root
$TESTTMP/thatdir/rel
test unshare relshared repo
$ cd thatdir/rel
$ hg unshare
$ test -d .hg/store
$ test -f .hg/sharedpath
[1]
$ grep shared .hg/requires
[1]
$ hg unshare
abort: this is not a shared repo
[255]
$ cd ../..
$ rm -r thatdir
Demonstrate buggy behavior around requirements validation
See comment in localrepo.py:makelocalrepository() for more.
$ hg init sharenewrequires
$ hg share sharenewrequires shareoldrequires
updating working directory
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cat >> sharenewrequires/.hg/requires << EOF
> missing-requirement
> EOF
We cannot open the repo with the unknown requirement
$ hg -R sharenewrequires status
abort: repository requires features unknown to this Mercurial: missing-requirement!
(see https://mercurial-scm.org/wiki/MissingRequirement for more information)
[255]
BUG: we don't get the same error when opening the shared repo pointing to it
$ hg -R shareoldrequires status
Explicitly kill daemons to let the test exit on Windows
$ killdaemons.py