view mercurial/server.py @ 44646:5f9c917e3b50

phabricator: teach `getoldnodedrevmap()` to handle folded reviews

The tricky part here is reasoning through all of the possible predecessor
scenarios.  In the typical case of submitting a folded range and then
resubmitting it (also folded), filtering the list of commits for the diff stored
on Phabricator through the local predecessor list for each single node will
result in the typical 1:1 mapping to the old node.

There are edge cases like using `hg fold` within the range prior to
resubmitting, that will result in mapping to multiple old nodes.  In that case,
the first direct predecessor is needed for the base of the diff, and the last
direct predecessor is needed for the head of the diff in order to make sure that
the entire range is included in the diff content.  And none of this matters for
commits in the middle of the range, as they are never used.

Fortunately the only crucial thing here is the `drev` number for each node.  For
these complicated cases where there are multiple old nodes, simply ignore them
all.  This will cause `createdifferentialrevision()` to generate a new diff
(within the same Differential), and avoids complicating the code.

Differential Revision: https://phab.mercurial-scm.org/D8311

# server.py - utility and factory of server
#
# Copyright 2005-2007 Matt Mackall <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from __future__ import absolute_import

import os

from .i18n import _
from .pycompat import open

from . import (
    chgserver,
    cmdutil,
    commandserver,
    error,
    hgweb,
    pycompat,
    util,
)

from .utils import procutil


def runservice(
    opts,
    parentfn=None,
    initfn=None,
    runfn=None,
    logfile=None,
    runargs=None,
    appendpid=False,
):
    '''Run a command as a service.'''

    postexecargs = {}

    if opts[b'daemon_postexec']:
        for inst in opts[b'daemon_postexec']:
            if inst.startswith(b'unlink:'):
                postexecargs[b'unlink'] = inst[7:]
            elif inst.startswith(b'chdir:'):
                postexecargs[b'chdir'] = inst[6:]
            elif inst != b'none':
                raise error.Abort(
                    _(b'invalid value for --daemon-postexec: %s') % inst
                )

    # When daemonized on Windows, redirect stdout/stderr to the lockfile (which
    # gets cleaned up after the child is up and running), so that the parent can
    # read and print the error if this child dies early.  See 594dd384803c.  On
    # other platforms, the child can write to the parent's stdio directly, until
    # it is redirected prior to runfn().
    if pycompat.iswindows and opts[b'daemon_postexec']:
        if b'unlink' in postexecargs and os.path.exists(
            postexecargs[b'unlink']
        ):
            procutil.stdout.flush()
            procutil.stderr.flush()

            fd = os.open(
                postexecargs[b'unlink'], os.O_WRONLY | os.O_APPEND | os.O_BINARY
            )
            try:
                os.dup2(fd, procutil.stdout.fileno())
                os.dup2(fd, procutil.stderr.fileno())
            finally:
                os.close(fd)

    def writepid(pid):
        if opts[b'pid_file']:
            if appendpid:
                mode = b'ab'
            else:
                mode = b'wb'
            fp = open(opts[b'pid_file'], mode)
            fp.write(b'%d\n' % pid)
            fp.close()

    if opts[b'daemon'] and not opts[b'daemon_postexec']:
        # Signal child process startup with file removal
        lockfd, lockpath = pycompat.mkstemp(prefix=b'hg-service-')
        os.close(lockfd)
        try:
            if not runargs:
                runargs = procutil.hgcmd() + pycompat.sysargv[1:]
            runargs.append(b'--daemon-postexec=unlink:%s' % lockpath)
            # Don't pass --cwd to the child process, because we've already
            # changed directory.
            for i in pycompat.xrange(1, len(runargs)):
                if runargs[i].startswith(b'--cwd='):
                    del runargs[i]
                    break
                elif runargs[i].startswith(b'--cwd'):
                    del runargs[i : i + 2]
                    break

            def condfn():
                return not os.path.exists(lockpath)

            pid = procutil.rundetached(runargs, condfn)
            if pid < 0:
                # If the daemonized process managed to write out an error msg,
                # report it.
                if pycompat.iswindows and os.path.exists(lockpath):
                    with open(lockpath, b'rb') as log:
                        for line in log:
                            procutil.stderr.write(line)
                raise error.Abort(_(b'child process failed to start'))
            writepid(pid)
        finally:
            util.tryunlink(lockpath)
        if parentfn:
            return parentfn(pid)
        else:
            return

    if initfn:
        initfn()

    if not opts[b'daemon']:
        writepid(procutil.getpid())

    if opts[b'daemon_postexec']:
        try:
            os.setsid()
        except AttributeError:
            pass

        if b'chdir' in postexecargs:
            os.chdir(postexecargs[b'chdir'])
        procutil.hidewindow()
        procutil.stdout.flush()
        procutil.stderr.flush()

        nullfd = os.open(os.devnull, os.O_RDWR)
        logfilefd = nullfd
        if logfile:
            logfilefd = os.open(
                logfile, os.O_RDWR | os.O_CREAT | os.O_APPEND, 0o666
            )
        os.dup2(nullfd, procutil.stdin.fileno())
        os.dup2(logfilefd, procutil.stdout.fileno())
        os.dup2(logfilefd, procutil.stderr.fileno())
        stdio = (
            procutil.stdin.fileno(),
            procutil.stdout.fileno(),
            procutil.stderr.fileno(),
        )
        if nullfd not in stdio:
            os.close(nullfd)
        if logfile and logfilefd not in stdio:
            os.close(logfilefd)

        # Only unlink after redirecting stdout/stderr, so Windows doesn't
        # complain about a sharing violation.
        if b'unlink' in postexecargs:
            os.unlink(postexecargs[b'unlink'])

    if runfn:
        return runfn()


_cmdservicemap = {
    b'chgunix': chgserver.chgunixservice,
    b'pipe': commandserver.pipeservice,
    b'unix': commandserver.unixforkingservice,
}


def _createcmdservice(ui, repo, opts):
    mode = opts[b'cmdserver']
    try:
        servicefn = _cmdservicemap[mode]
    except KeyError:
        raise error.Abort(_(b'unknown mode %s') % mode)
    commandserver.setuplogging(ui, repo)
    return servicefn(ui, repo, opts)


def _createhgwebservice(ui, repo, opts):
    # this way we can check if something was given in the command-line
    if opts.get(b'port'):
        opts[b'port'] = util.getport(opts.get(b'port'))

    alluis = {ui}
    if repo:
        baseui = repo.baseui
        alluis.update([repo.baseui, repo.ui])
    else:
        baseui = ui
    webconf = opts.get(b'web_conf') or opts.get(b'webdir_conf')
    if webconf:
        if opts.get(b'subrepos'):
            raise error.Abort(_(b'--web-conf cannot be used with --subrepos'))

        # load server settings (e.g. web.port) to "copied" ui, which allows
        # hgwebdir to reload webconf cleanly
        servui = ui.copy()
        servui.readconfig(webconf, sections=[b'web'])
        alluis.add(servui)
    elif opts.get(b'subrepos'):
        servui = ui

        # If repo is None, hgweb.createapp() already raises a proper abort
        # message as long as webconf is None.
        if repo:
            webconf = dict()
            cmdutil.addwebdirpath(repo, b"", webconf)
    else:
        servui = ui

    optlist = (
        b"name templates style address port prefix ipv6"
        b" accesslog errorlog certificate encoding"
    )
    for o in optlist.split():
        val = opts.get(o, b'')
        if val in (None, b''):  # should check against default options instead
            continue
        for u in alluis:
            u.setconfig(b"web", o, val, b'serve')

    app = hgweb.createapp(baseui, repo, webconf)
    return hgweb.httpservice(servui, app, opts)


def createservice(ui, repo, opts):
    if opts[b"cmdserver"]:
        return _createcmdservice(ui, repo, opts)
    else:
        return _createhgwebservice(ui, repo, opts)