view tests/badserverext.py @ 36534:5faeabb07cf5

debugcommands: support for triggering push protocol

The mechanism for pushing to a remote is a bit more complicated
than other commands. On SSH, we wait for a positive reply from
the server before we start sending the bundle payload.

This commit adds a mechanism to the "command" action in
`hg debugwireproto` to trigger the "push protocol" and to
specify a file whose contents should be submitted as the command
payload.

With this new feature, we implement a handful of tests for the
"unbundle" command. We try to cover various server failures and
hook/output scenarios so protocol behavior is as comprehensively
tested as possible. Even with so much test output, we only cover
bundle1 with Python hooks. There's still a lot of test coverage
that needs to be implemented. But this is certainly a good start.

Because there are so many new tests, we split these tests into their
own test file.

In order to make output deterministic, we need to disable the
doublepipe primitive. We add an option to `hg debugwireproto`
to do that. Because something in the bowels of the peer does a
read of stderr, we still capture read I/O from stderr. So there
is test coverage of what the server emits.

The tests around I/O capture some wonkiness. For example,
interleaved ui.write() and ui.write_err() calls are emitted in
order. However, (presumably due to buffering), print() to
sys.stdout and sys.stderr aren't in order.

We currently only test bundle1 because bundle2 is substantially
harder to test because it is more complicated (the server responds
with a stream containing a bundle2 instead of a frame).

Differential Revision: https://phab.mercurial-scm.org/D2471

# badserverext.py - Extension making servers behave badly
#
# Copyright 2017 Gregory Szorc <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

# no-check-code

"""Extension to make servers behave badly.

This extension is useful for testing Mercurial behavior when various network
events occur.

Various config options in the [badserver] section influence behavior:

closebeforeaccept
   If true, close() the server socket when a new connection arrives before
   accept() is called. The server will then exit.

closeafteraccept
   If true, the server will close() the client socket immediately after
   accept().

closeafterrecvbytes
   If defined, close the client socket after receiving this many bytes.

closeaftersendbytes
   If defined, close the client socket after sending this many bytes.
"""

from __future__ import absolute_import

import socket

from mercurial import(
    registrar,
)

from mercurial.hgweb import (
    server,
)

configtable = {}
configitem = registrar.configitem(configtable)

configitem(b'badserver', b'closeafteraccept',
    default=False,
)
configitem(b'badserver', b'closeafterrecvbytes',
    default=0,
)
configitem(b'badserver', b'closeaftersendbytes',
    default=0,
)
configitem(b'badserver', b'closebeforeaccept',
    default=False,
)

# We can't adjust __class__ on a socket instance. So we define a proxy type.
class socketproxy(object):
    __slots__ = (
        '_orig',
        '_logfp',
        '_closeafterrecvbytes',
        '_closeaftersendbytes',
    )

    def __init__(self, obj, logfp, closeafterrecvbytes=0,
                 closeaftersendbytes=0):
        object.__setattr__(self, '_orig', obj)
        object.__setattr__(self, '_logfp', logfp)
        object.__setattr__(self, '_closeafterrecvbytes', closeafterrecvbytes)
        object.__setattr__(self, '_closeaftersendbytes', closeaftersendbytes)

    def __getattribute__(self, name):
        if name in ('makefile',):
            return object.__getattribute__(self, name)

        return getattr(object.__getattribute__(self, '_orig'), name)

    def __delattr__(self, name):
        delattr(object.__getattribute__(self, '_orig'), name)

    def __setattr__(self, name, value):
        setattr(object.__getattribute__(self, '_orig'), name, value)

    def makefile(self, mode, bufsize):
        f = object.__getattribute__(self, '_orig').makefile(mode, bufsize)

        logfp = object.__getattribute__(self, '_logfp')
        closeafterrecvbytes = object.__getattribute__(self,
                                                      '_closeafterrecvbytes')
        closeaftersendbytes = object.__getattribute__(self,
                                                      '_closeaftersendbytes')

        return fileobjectproxy(f, logfp,
                               closeafterrecvbytes=closeafterrecvbytes,
                               closeaftersendbytes=closeaftersendbytes)

# We can't adjust __class__ on socket._fileobject, so define a proxy.
class fileobjectproxy(object):
    __slots__ = (
        '_orig',
        '_logfp',
        '_closeafterrecvbytes',
        '_closeaftersendbytes',
    )

    def __init__(self, obj, logfp, closeafterrecvbytes=0,
                 closeaftersendbytes=0):
        object.__setattr__(self, '_orig', obj)
        object.__setattr__(self, '_logfp', logfp)
        object.__setattr__(self, '_closeafterrecvbytes', closeafterrecvbytes)
        object.__setattr__(self, '_closeaftersendbytes', closeaftersendbytes)

    def __getattribute__(self, name):
        if name in ('read', 'readline', 'write', '_writelog'):
            return object.__getattribute__(self, name)

        return getattr(object.__getattribute__(self, '_orig'), name)

    def __delattr__(self, name):
        delattr(object.__getattribute__(self, '_orig'), name)

    def __setattr__(self, name, value):
        setattr(object.__getattribute__(self, '_orig'), name, value)

    def _writelog(self, msg):
        msg = msg.replace('\r', '\\r').replace('\n', '\\n')

        object.__getattribute__(self, '_logfp').write(msg)
        object.__getattribute__(self, '_logfp').write('\n')
        object.__getattribute__(self, '_logfp').flush()

    def read(self, size=-1):
        remaining = object.__getattribute__(self, '_closeafterrecvbytes')

        # No read limit. Call original function.
        if not remaining:
            result = object.__getattribute__(self, '_orig').read(size)
            self._writelog('read(%d) -> (%d) (%s) %s' % (size,
                                                           len(result),
                                                           result))
            return result

        origsize = size

        if size < 0:
            size = remaining
        else:
            size = min(remaining, size)

        result = object.__getattribute__(self, '_orig').read(size)
        remaining -= len(result)

        self._writelog('read(%d from %d) -> (%d) %s' % (
            size, origsize, len(result), result))

        object.__setattr__(self, '_closeafterrecvbytes', remaining)

        if remaining <= 0:
            self._writelog('read limit reached, closing socket')
            self._sock.close()
            # This is the easiest way to abort the current request.
            raise Exception('connection closed after receiving N bytes')

        return result

    def readline(self, size=-1):
        remaining = object.__getattribute__(self, '_closeafterrecvbytes')

        # No read limit. Call original function.
        if not remaining:
            result = object.__getattribute__(self, '_orig').readline(size)
            self._writelog('readline(%d) -> (%d) %s' % (
                size, len(result), result))
            return result

        origsize = size

        if size < 0:
            size = remaining
        else:
            size = min(remaining, size)

        result = object.__getattribute__(self, '_orig').readline(size)
        remaining -= len(result)

        self._writelog('readline(%d from %d) -> (%d) %s' % (
            size, origsize, len(result), result))

        object.__setattr__(self, '_closeafterrecvbytes', remaining)

        if remaining <= 0:
            self._writelog('read limit reached; closing socket')
            self._sock.close()
            # This is the easiest way to abort the current request.
            raise Exception('connection closed after receiving N bytes')

        return result

    def write(self, data):
        remaining = object.__getattribute__(self, '_closeaftersendbytes')

        # No byte limit on this operation. Call original function.
        if not remaining:
            self._writelog('write(%d) -> %s' % (len(data), data))
            result = object.__getattribute__(self, '_orig').write(data)
            return result

        if len(data) > remaining:
            newdata = data[0:remaining]
        else:
            newdata = data

        remaining -= len(newdata)

        self._writelog('write(%d from %d) -> (%d) %s' % (
            len(newdata), len(data), remaining, newdata))

        result = object.__getattribute__(self, '_orig').write(newdata)

        object.__setattr__(self, '_closeaftersendbytes', remaining)

        if remaining <= 0:
            self._writelog('write limit reached; closing socket')
            self._sock.close()
            raise Exception('connection closed after sending N bytes')

        return result

def extsetup(ui):
    # Change the base HTTP server class so various events can be performed.
    # See SocketServer.BaseServer for how the specially named methods work.
    class badserver(server.MercurialHTTPServer):
        def __init__(self, ui, *args, **kwargs):
            self._ui = ui
            super(badserver, self).__init__(ui, *args, **kwargs)

            # Need to inherit object so super() works.
            class badrequesthandler(self.RequestHandlerClass, object):
                def send_header(self, name, value):
                    # Make headers deterministic to facilitate testing.
                    if name.lower() == 'date':
                        value = 'Fri, 14 Apr 2017 00:00:00 GMT'
                    elif name.lower() == 'server':
                        value = 'badhttpserver'

                    return super(badrequesthandler, self).send_header(name,
                                                                      value)

            self.RequestHandlerClass = badrequesthandler

        # Called to accept() a pending socket.
        def get_request(self):
            if self._ui.configbool('badserver', 'closebeforeaccept'):
                self.socket.close()

                # Tells the server to stop processing more requests.
                self.__shutdown_request = True

                # Simulate failure to stop processing this request.
                raise socket.error('close before accept')

            if self._ui.configbool('badserver', 'closeafteraccept'):
                request, client_address = super(badserver, self).get_request()
                request.close()
                raise socket.error('close after accept')

            return super(badserver, self).get_request()

        # Does heavy lifting of processing a request. Invokes
        # self.finish_request() which calls self.RequestHandlerClass() which
        # is a hgweb.server._httprequesthandler.
        def process_request(self, socket, address):
            # Wrap socket in a proxy if we need to count bytes.
            closeafterrecvbytes = self._ui.configint('badserver',
                                                     'closeafterrecvbytes')
            closeaftersendbytes = self._ui.configint('badserver',
                                                     'closeaftersendbytes')

            if closeafterrecvbytes or closeaftersendbytes:
                socket = socketproxy(socket, self.errorlog,
                                     closeafterrecvbytes=closeafterrecvbytes,
                                     closeaftersendbytes=closeaftersendbytes)

            return super(badserver, self).process_request(socket, address)

    server.MercurialHTTPServer = badserver