view tests/test-config.t @ 36534:5faeabb07cf5

debugcommands: support for triggering push protocol

The mechanism for pushing to a remote is a bit more complicated
than other commands. On SSH, we wait for a positive reply from
the server before we start sending the bundle payload.

This commit adds a mechanism to the "command" action in
`hg debugwireproto` to trigger the "push protocol" and to
specify a file whose contents should be submitted as the command
payload.

With this new feature, we implement a handful of tests for the
"unbundle" command. We try to cover various server failures and
hook/output scenarios so protocol behavior is as comprehensively
tested as possible. Even with so much test output, we only cover
bundle1 with Python hooks. There's still a lot of test coverage
that needs to be implemented. But this is certainly a good start.

Because there are so many new tests, we split these tests into their
own test file.

In order to make output deterministic, we need to disable the
doublepipe primitive. We add an option to `hg debugwireproto`
to do that. Because something in the bowels of the peer does a
read of stderr, we still capture read I/O from stderr. So there
is test coverage of what the server emits.

The tests around I/O capture some wonkiness. For example,
interleaved ui.write() and ui.write_err() calls are emitted in
order. However, (presumably due to buffering), print() to
sys.stdout and sys.stderr aren't in order.

We currently only test bundle1 because bundle2 is substantially
harder to test because it is more complicated (the server responds
with a stream containing a bundle2 instead of a frame).

Differential Revision: https://phab.mercurial-scm.org/D2471

hide outer repo
  $ hg init

Invalid syntax: no value

  $ cat > .hg/hgrc << EOF
  > novaluekey
  > EOF
  $ hg showconfig
  hg: parse error at $TESTTMP/.hg/hgrc:1: novaluekey
  [255]

Invalid syntax: no key

  $ cat > .hg/hgrc << EOF
  > =nokeyvalue
  > EOF
  $ hg showconfig
  hg: parse error at $TESTTMP/.hg/hgrc:1: =nokeyvalue
  [255]

Test hint about invalid syntax from leading white space

  $ cat > .hg/hgrc << EOF
  >  key=value
  > EOF
  $ hg showconfig
  hg: parse error at $TESTTMP/.hg/hgrc:1:  key=value
  unexpected leading whitespace
  [255]

  $ cat > .hg/hgrc << EOF
  >  [section]
  > key=value
  > EOF
  $ hg showconfig
  hg: parse error at $TESTTMP/.hg/hgrc:1:  [section]
  unexpected leading whitespace
  [255]

Reset hgrc

  $ echo > .hg/hgrc

Test case sensitive configuration

  $ cat <<EOF >> $HGRCPATH
  > [Section]
  > KeY = Case Sensitive
  > key = lower case
  > EOF

  $ hg showconfig Section
  Section.KeY=Case Sensitive
  Section.key=lower case

  $ hg showconfig Section -Tjson
  [
   {
    "name": "Section.KeY",
    "source": "*.hgrc:*", (glob)
    "value": "Case Sensitive"
   },
   {
    "name": "Section.key",
    "source": "*.hgrc:*", (glob)
    "value": "lower case"
   }
  ]
  $ hg showconfig Section.KeY -Tjson
  [
   {
    "name": "Section.KeY",
    "source": "*.hgrc:*", (glob)
    "value": "Case Sensitive"
   }
  ]
  $ hg showconfig -Tjson | tail -7
   },
   {
    "name": "*", (glob)
    "source": "*", (glob)
    "value": "*" (glob)
   }
  ]

Test empty config source:

  $ cat <<EOF > emptysource.py
  > def reposetup(ui, repo):
  >     ui.setconfig('empty', 'source', 'value')
  > EOF
  $ cp .hg/hgrc .hg/hgrc.orig
  $ cat <<EOF >> .hg/hgrc
  > [extensions]
  > emptysource = `pwd`/emptysource.py
  > EOF

  $ hg config --debug empty.source
  read config from: * (glob)
  none: value
  $ hg config empty.source -Tjson
  [
   {
    "name": "empty.source",
    "source": "",
    "value": "value"
   }
  ]

  $ cp .hg/hgrc.orig .hg/hgrc

Test "%unset"

  $ cat >> $HGRCPATH <<EOF
  > [unsettest]
  > local-hgrcpath = should be unset (HGRCPATH)
  > %unset local-hgrcpath
  > 
  > global = should be unset (HGRCPATH)
  > 
  > both = should be unset (HGRCPATH)
  > 
  > set-after-unset = should be unset (HGRCPATH)
  > EOF

  $ cat >> .hg/hgrc <<EOF
  > [unsettest]
  > local-hgrc = should be unset (.hg/hgrc)
  > %unset local-hgrc
  > 
  > %unset global
  > 
  > both = should be unset (.hg/hgrc)
  > %unset both
  > 
  > set-after-unset = should be unset (.hg/hgrc)
  > %unset set-after-unset
  > set-after-unset = should be set (.hg/hgrc)
  > EOF

  $ hg showconfig unsettest
  unsettest.set-after-unset=should be set (.hg/hgrc)

Test exit code when no config matches

  $ hg config Section.idontexist
  [1]

sub-options in [paths] aren't expanded

  $ cat > .hg/hgrc << EOF
  > [paths]
  > foo = ~/foo
  > foo:suboption = ~/foo
  > EOF

  $ hg showconfig paths
  paths.foo:suboption=~/foo
  paths.foo=$TESTTMP/foo

edit failure

  $ HGEDITOR=false hg config --edit
  abort: edit failed: false exited with status 1
  [255]

config affected by environment variables

  $ EDITOR=e1 VISUAL=e2 hg config --debug | grep 'ui\.editor'
  $VISUAL: ui.editor=e2

  $ VISUAL=e2 hg config --debug --config ui.editor=e3 | grep 'ui\.editor'
  --config: ui.editor=e3

  $ PAGER=p1 hg config --debug | grep 'pager\.pager'
  $PAGER: pager.pager=p1

  $ PAGER=p1 hg config --debug --config pager.pager=p2 | grep 'pager\.pager'
  --config: pager.pager=p2

verify that aliases are evaluated as well

  $ hg init aliastest
  $ cd aliastest
  $ cat > .hg/hgrc << EOF
  > [ui]
  > user = repo user
  > EOF
  $ touch index
  $ unset HGUSER
  $ hg ci -Am test
  adding index
  $ hg log --template '{author}\n'
  repo user
  $ cd ..

alias has lower priority

  $ hg init aliaspriority
  $ cd aliaspriority
  $ cat > .hg/hgrc << EOF
  > [ui]
  > user = alias user
  > username = repo user
  > EOF
  $ touch index
  $ unset HGUSER
  $ hg ci -Am test
  adding index
  $ hg log --template '{author}\n'
  repo user
  $ cd ..