view tests/test-convert-svn-move.t @ 36534:5faeabb07cf5

debugcommands: support for triggering push protocol

The mechanism for pushing to a remote is a bit more complicated
than other commands. On SSH, we wait for a positive reply from
the server before we start sending the bundle payload.

This commit adds a mechanism to the "command" action in
`hg debugwireproto` to trigger the "push protocol" and to
specify a file whose contents should be submitted as the command
payload.

With this new feature, we implement a handful of tests for the
"unbundle" command. We try to cover various server failures and
hook/output scenarios so protocol behavior is as comprehensively
tested as possible. Even with so much test output, we only cover
bundle1 with Python hooks. There's still a lot of test coverage
that needs to be implemented. But this is certainly a good start.

Because there are so many new tests, we split these tests into their
own test file.

In order to make output deterministic, we need to disable the
doublepipe primitive. We add an option to `hg debugwireproto`
to do that. Because something in the bowels of the peer does a
read of stderr, we still capture read I/O from stderr. So there
is test coverage of what the server emits.

The tests around I/O capture some wonkiness. For example,
interleaved ui.write() and ui.write_err() calls are emitted in
order. However, (presumably due to buffering), print() to
sys.stdout and sys.stderr aren't in order.

We currently only test bundle1 because bundle2 is substantially
harder to test because it is more complicated (the server responds
with a stream containing a bundle2 instead of a frame).

Differential Revision: https://phab.mercurial-scm.org/D2471

#require svn svn-bindings

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > convert =
  > EOF

  $ svnadmin create svn-repo
  $ svnadmin load -q svn-repo < "$TESTDIR/svn/move.svndump"
  $ SVNREPOPATH=`pwd`/svn-repo
#if windows
  $ SVNREPOURL=file:///`$PYTHON -c "import urllib, sys; sys.stdout.write(urllib.quote(sys.argv[1]))" "$SVNREPOPATH"`
#else
  $ SVNREPOURL=file://`$PYTHON -c "import urllib, sys; sys.stdout.write(urllib.quote(sys.argv[1]))" "$SVNREPOPATH"`
#endif

Convert trunk and branches

  $ hg convert --datesort "$SVNREPOURL"/subproject A-hg
  initializing destination A-hg repository
  scanning source...
  sorting...
  converting...
  13 createtrunk
  12 moved1
  11 moved1
  10 moved2
  9 changeb and rm d2
  8 changeb and rm d2
  7 moved1again
  6 moved1again
  5 copyfilefrompast
  4 copydirfrompast
  3 add d3
  2 copy dir and remove subdir
  1 add d4old
  0 rename d4old into d4new

  $ cd A-hg
  $ hg log -G --template '{rev} {desc|firstline} files: {files}\n'
  o  13 rename d4old into d4new files: d4new/g d4old/g
  |
  o  12 add d4old files: d4old/g
  |
  o  11 copy dir and remove subdir files: d3/d31/e d4/d31/e d4/f
  |
  o  10 add d3 files: d3/d31/e d3/f
  |
  o  9 copydirfrompast files: d2/d
  |
  o  8 copyfilefrompast files: d
  |
  o  7 moved1again files: d1/b d1/c
  |
  | o  6 moved1again files:
  | |
  o |  5 changeb and rm d2 files: d1/b d2/d
  | |
  | o  4 changeb and rm d2 files: b
  | |
  o |  3 moved2 files: d2/d
  | |
  o |  2 moved1 files: d1/b d1/c
  | |
  | o  1 moved1 files: b c
  |
  o  0 createtrunk files:
  

Check move copy records

  $ hg st --rev 12:13 --copies
  A d4new/g
    d4old/g
  R d4old/g

Check branches

  $ hg branches
  default                       13:* (glob)
  d1                             6:* (glob)
  $ cd ..

  $ mkdir test-replace
  $ cd test-replace
  $ svnadmin create svn-repo
  $ svnadmin load -q svn-repo < "$TESTDIR/svn/replace.svndump"

Convert files being replaced by directories

  $ hg convert svn-repo hg-repo
  initializing destination hg-repo repository
  scanning source...
  sorting...
  converting...
  6 initial
  5 clobber symlink
  4 clobber1
  3 clobber2
  2 adddb
  1 clobberdir
  0 branch

  $ cd hg-repo

Manifest before

  $ hg -v manifest -r 1
  644   a
  644   d/b
  644   d2/a
  644 @ dlink
  644 @ dlink2
  644   dlink3

Manifest after clobber1

  $ hg -v manifest -r 2
  644   a/b
  644   d/b
  644   d2/a
  644   dlink/b
  644 @ dlink2
  644   dlink3

Manifest after clobber2

  $ hg -v manifest -r 3
  644   a/b
  644   d/b
  644   d2/a
  644   dlink/b
  644 @ dlink2
  644 @ dlink3

Manifest after clobberdir

  $ hg -v manifest -r 6
  644   a/b
  644   d/b
  644   d2/a
  644   d2/c
  644   dlink/b
  644 @ dlink2
  644 @ dlink3

Try updating

  $ hg up -qC default
  $ cd ..

Test convert progress bar

  $ cat >> $HGRCPATH <<EOF
  > [progress]
  > assume-tty = 1
  > delay = 0
  > changedelay = 0
  > format = topic bar number
  > refresh = 0
  > width = 60
  > EOF

  $ hg convert svn-repo hg-progress
  \r (no-eol) (esc)
  scanning [=====>                                      ] 1/7\r (no-eol) (esc)
  scanning [===========>                                ] 2/7\r (no-eol) (esc)
  scanning [=================>                          ] 3/7\r (no-eol) (esc)
  scanning [========================>                   ] 4/7\r (no-eol) (esc)
  scanning [==============================>             ] 5/7\r (no-eol) (esc)
  scanning [====================================>       ] 6/7\r (no-eol) (esc)
  scanning [===========================================>] 7/7\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [                                          ] 0/7\r (no-eol) (esc)
  getting files [=====>                                 ] 1/6\r (no-eol) (esc)
  getting files [============>                          ] 2/6\r (no-eol) (esc)
  getting files [==================>                    ] 3/6\r (no-eol) (esc)
  getting files [=========================>             ] 4/6\r (no-eol) (esc)
  getting files [===============================>       ] 5/6\r (no-eol) (esc)
  getting files [======================================>] 6/6\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [=====>                                    ] 1/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/1\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [===========>                              ] 2/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/2\r (no-eol) (esc)
  scanning paths [==================>                   ] 1/2\r (no-eol) (esc)
  getting files [========>                              ] 1/4\r (no-eol) (esc)
  getting files [==================>                    ] 2/4\r (no-eol) (esc)
  getting files [============================>          ] 3/4\r (no-eol) (esc)
  getting files [======================================>] 4/4\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [=================>                        ] 3/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/1\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [=======================>                  ] 4/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/1\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [=============================>            ] 5/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/1\r (no-eol) (esc)
  getting files [===>                                   ] 1/8\r (no-eol) (esc)
  getting files [========>                              ] 2/8\r (no-eol) (esc)
  getting files [=============>                         ] 3/8\r (no-eol) (esc)
  getting files [==================>                    ] 4/8\r (no-eol) (esc)
  getting files [=======================>               ] 5/8\r (no-eol) (esc)
  getting files [============================>          ] 6/8\r (no-eol) (esc)
  getting files [=================================>     ] 7/8\r (no-eol) (esc)
  getting files [======================================>] 8/8\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [===================================>      ] 6/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/3\r (no-eol) (esc)
  scanning paths [===========>                          ] 1/3\r (no-eol) (esc)
  scanning paths [========================>             ] 2/3\r (no-eol) (esc)
  getting files [===>                                   ] 1/8\r (no-eol) (esc)
  getting files [========>                              ] 2/8\r (no-eol) (esc)
  getting files [=============>                         ] 3/8\r (no-eol) (esc)
  getting files [==================>                    ] 4/8\r (no-eol) (esc)
  getting files [=======================>               ] 5/8\r (no-eol) (esc)
  getting files [============================>          ] 6/8\r (no-eol) (esc)
  getting files [=================================>     ] 7/8\r (no-eol) (esc)
  getting files [======================================>] 8/8\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  initializing destination hg-progress repository
  scanning source...
  sorting...
  converting...
  6 initial
  5 clobber symlink
  4 clobber1
  3 clobber2
  2 adddb
  1 clobberdir
  0 branch

  $ cd ..