view tests/test-exchange-obsmarkers-case-C1.t @ 36534:5faeabb07cf5

debugcommands: support for triggering push protocol

The mechanism for pushing to a remote is a bit more complicated
than other commands. On SSH, we wait for a positive reply from
the server before we start sending the bundle payload.

This commit adds a mechanism to the "command" action in
`hg debugwireproto` to trigger the "push protocol" and to
specify a file whose contents should be submitted as the command
payload.

With this new feature, we implement a handful of tests for the
"unbundle" command. We try to cover various server failures and
hook/output scenarios so protocol behavior is as comprehensively
tested as possible. Even with so much test output, we only cover
bundle1 with Python hooks. There's still a lot of test coverage
that needs to be implemented. But this is certainly a good start.

Because there are so many new tests, we split these tests into their
own test file.

In order to make output deterministic, we need to disable the
doublepipe primitive. We add an option to `hg debugwireproto`
to do that. Because something in the bowels of the peer does a
read of stderr, we still capture read I/O from stderr. So there
is test coverage of what the server emits.

The tests around I/O capture some wonkiness. For example,
interleaved ui.write() and ui.write_err() calls are emitted in
order. However, (presumably due to buffering), print() to
sys.stdout and sys.stderr aren't in order.

We currently only test bundle1 because bundle2 is substantially
harder to test because it is more complicated (the server responds
with a stream containing a bundle2 instead of a frame).

Differential Revision: https://phab.mercurial-scm.org/D2471

============================================
Testing obsolescence markers push: Cases C.1
============================================

Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).

This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.

Category C: advanced case
TestCase 1: Multiple pruned changeset atop each other
Variants:
# a: explicite push
# b: bare push

C.1 Multiple pruned changeset atop each other
=============================================

.. {{{
..   ⊗ B
..   |
..   ⊗ A
..   |
..   ● O
.. }}}
..
.. Marker exist from:
..
..  * A (prune)
..  * B (prune)
..
.. Commands run:
..
..  * hg push -r O
..  * hg push
..
.. Expected exchange:
..
..  * A (prune)
..  * B (prune)

Setup
-----

  $ . $TESTDIR/testlib/exchange-obsmarker-util.sh

Initial

  $ setuprepos C.1
  creating test repo for test case C.1
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A
  $ mkcommit B
  $ hg prune -qd '0 0' '.~1'
  1 new orphan changesets
  $ hg prune -qd '0 0' .
  $ hg log -G --hidden
  x  f6fbb35d8ac9 (draft): B
  |
  x  f5bc6836db60 (draft): A
  |
  @  a9bdc8b26820 (public): O
  
  $ inspect_obsmarkers
  obsstore content
  ================
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6fbb35d8ac958bbe70035e4c789c18471cdc0af 0 {f5bc6836db60e308a17ba08bf050154ba9c4fad7} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  $ cd ..
  $ cd ..

  $ cp -R C.1 C.1.a
  $ cp -R C.1 C.1.b

Actual Test (explicit push)
---------------------------

  $ dotest C.1.a O
  ## Running testcase C.1.a
  # testing echange of "O" (a9bdc8b26820)
  ## initial state
  # obstore: main
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6fbb35d8ac958bbe70035e4c789c18471cdc0af 0 {f5bc6836db60e308a17ba08bf050154ba9c4fad7} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "O" from main to pushdest
  pushing to pushdest
  searching for changes
  no changes found
  remote: 2 new obsolescence markers
  ## post push state
  # obstore: main
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6fbb35d8ac958bbe70035e4c789c18471cdc0af 0 {f5bc6836db60e308a17ba08bf050154ba9c4fad7} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6fbb35d8ac958bbe70035e4c789c18471cdc0af 0 {f5bc6836db60e308a17ba08bf050154ba9c4fad7} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling "a9bdc8b26820" from main into pulldest
  pulling from main
  no changes found
  2 new obsolescence markers
  ## post pull state
  # obstore: main
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6fbb35d8ac958bbe70035e4c789c18471cdc0af 0 {f5bc6836db60e308a17ba08bf050154ba9c4fad7} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6fbb35d8ac958bbe70035e4c789c18471cdc0af 0 {f5bc6836db60e308a17ba08bf050154ba9c4fad7} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6fbb35d8ac958bbe70035e4c789c18471cdc0af 0 {f5bc6836db60e308a17ba08bf050154ba9c4fad7} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}

Actual Test (bare push)
-------------------------------------

  $ dotest C.1.b
  ## Running testcase C.1.b
  ## initial state
  # obstore: main
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6fbb35d8ac958bbe70035e4c789c18471cdc0af 0 {f5bc6836db60e308a17ba08bf050154ba9c4fad7} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing from main to pushdest
  pushing to pushdest
  searching for changes
  no changes found
  remote: 2 new obsolescence markers
  ## post push state
  # obstore: main
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6fbb35d8ac958bbe70035e4c789c18471cdc0af 0 {f5bc6836db60e308a17ba08bf050154ba9c4fad7} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6fbb35d8ac958bbe70035e4c789c18471cdc0af 0 {f5bc6836db60e308a17ba08bf050154ba9c4fad7} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling from main into pulldest
  pulling from main
  searching for changes
  no changes found
  2 new obsolescence markers
  ## post pull state
  # obstore: main
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6fbb35d8ac958bbe70035e4c789c18471cdc0af 0 {f5bc6836db60e308a17ba08bf050154ba9c4fad7} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6fbb35d8ac958bbe70035e4c789c18471cdc0af 0 {f5bc6836db60e308a17ba08bf050154ba9c4fad7} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6fbb35d8ac958bbe70035e4c789c18471cdc0af 0 {f5bc6836db60e308a17ba08bf050154ba9c4fad7} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}