view tests/test-pull-update.t @ 36534:5faeabb07cf5

debugcommands: support for triggering push protocol

The mechanism for pushing to a remote is a bit more complicated
than other commands. On SSH, we wait for a positive reply from
the server before we start sending the bundle payload.

This commit adds a mechanism to the "command" action in
`hg debugwireproto` to trigger the "push protocol" and to
specify a file whose contents should be submitted as the command
payload.

With this new feature, we implement a handful of tests for the
"unbundle" command. We try to cover various server failures and
hook/output scenarios so protocol behavior is as comprehensively
tested as possible. Even with so much test output, we only cover
bundle1 with Python hooks. There's still a lot of test coverage
that needs to be implemented. But this is certainly a good start.

Because there are so many new tests, we split these tests into their
own test file.

In order to make output deterministic, we need to disable the
doublepipe primitive. We add an option to `hg debugwireproto`
to do that. Because something in the bowels of the peer does a
read of stderr, we still capture read I/O from stderr. So there
is test coverage of what the server emits.

The tests around I/O capture some wonkiness. For example,
interleaved ui.write() and ui.write_err() calls are emitted in
order. However, (presumably due to buffering), print() to
sys.stdout and sys.stderr aren't in order.

We currently only test bundle1 because bundle2 is substantially
harder to test because it is more complicated (the server responds
with a stream containing a bundle2 instead of a frame).

Differential Revision: https://phab.mercurial-scm.org/D2471

  $ hg init t
  $ cd t
  $ echo 1 > foo
  $ hg ci -Am m
  adding foo

  $ cd ..
  $ hg clone t tt
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd tt
  $ echo 1.1 > foo
  $ hg ci -Am m

  $ cd ../t
  $ echo 1.2 > foo
  $ hg ci -Am m

Should respect config to disable dirty update
  $ hg co -qC 0
  $ echo 2 > foo
  $ hg --config commands.update.check=abort pull -u ../tt
  pulling from ../tt
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 107cefe13e42
  abort: uncommitted changes
  [255]
  $ hg --config extensions.strip= strip --no-backup tip
  $ hg co -qC tip

Should not update to the other topological branch:

  $ hg pull -u ../tt
  pulling from ../tt
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 107cefe13e42
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updated to "800c91d5bfc1: m"
  1 other heads for branch "default"

  $ cd ../tt

Should not update to the other branch:

  $ hg pull -u ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 800c91d5bfc1
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updated to "107cefe13e42: m"
  1 other heads for branch "default"

  $ HGMERGE=true hg merge
  merging foo
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci -mm

  $ cd ../t

Should work:

  $ hg pull -u ../tt
  pulling from ../tt
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (-1 heads)
  new changesets 483b76ad4309
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Similarity between "hg update" and "hg pull -u" in handling bookmark
====================================================================

Test that updating activates the bookmark, which matches with the
explicit destination of the update.

  $ echo 4 >> foo
  $ hg commit -m "#4"
  $ hg bookmark active-after-pull
  $ cd ../tt

(1) activating by --rev BOOKMARK

  $ hg bookmark -f active-before-pull
  $ hg bookmarks
   * active-before-pull        3:483b76ad4309

  $ hg pull -u -r active-after-pull
  pulling from $TESTTMP/t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  adding remote bookmark active-after-pull
  new changesets f815b3da6163
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (activating bookmark active-after-pull)

  $ hg parents -q
  4:f815b3da6163
  $ hg bookmarks
   * active-after-pull         4:f815b3da6163
     active-before-pull        3:483b76ad4309

(discard pulled changes)

  $ hg update -q 483b76ad4309
  $ hg rollback -q

(2) activating by URL#BOOKMARK

  $ hg bookmark -f active-before-pull
  $ hg bookmarks
   * active-before-pull        3:483b76ad4309

  $ hg pull -u $TESTTMP/t#active-after-pull
  pulling from $TESTTMP/t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  adding remote bookmark active-after-pull
  new changesets f815b3da6163
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (activating bookmark active-after-pull)

  $ hg parents -q
  4:f815b3da6163
  $ hg bookmarks
   * active-after-pull         4:f815b3da6163
     active-before-pull        3:483b76ad4309

(discard pulled changes)

  $ hg update -q 483b76ad4309
  $ hg rollback -q

Test that updating deactivates current active bookmark, if the
destination of the update is explicitly specified, and it doesn't
match with the name of any existing bookmarks.

  $ cd ../t
  $ hg bookmark -d active-after-pull
  $ hg branch bar -q
  $ hg commit -m "#5 (bar #1)"
  $ cd ../tt

(1) deactivating by --rev REV

  $ hg bookmark -f active-before-pull
  $ hg bookmarks
   * active-before-pull        3:483b76ad4309

  $ hg pull -u -r b5e4babfaaa7
  pulling from $TESTTMP/t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 1 changes to 1 files
  new changesets f815b3da6163:b5e4babfaaa7
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (leaving bookmark active-before-pull)

  $ hg parents -q
  5:b5e4babfaaa7
  $ hg bookmarks
     active-before-pull        3:483b76ad4309

(discard pulled changes)

  $ hg update -q 483b76ad4309
  $ hg rollback -q

(2) deactivating by --branch BRANCH

  $ hg bookmark -f active-before-pull
  $ hg bookmarks
   * active-before-pull        3:483b76ad4309

  $ hg pull -u -b bar
  pulling from $TESTTMP/t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 1 changes to 1 files
  new changesets f815b3da6163:b5e4babfaaa7
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (leaving bookmark active-before-pull)

  $ hg parents -q
  5:b5e4babfaaa7
  $ hg bookmarks
     active-before-pull        3:483b76ad4309

(discard pulled changes)

  $ hg update -q 483b76ad4309
  $ hg rollback -q

(3) deactivating by URL#ANOTHER-BRANCH

  $ hg bookmark -f active-before-pull
  $ hg bookmarks
   * active-before-pull        3:483b76ad4309

  $ hg pull -u $TESTTMP/t#bar
  pulling from $TESTTMP/t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 1 changes to 1 files
  new changesets f815b3da6163:b5e4babfaaa7
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (leaving bookmark active-before-pull)

  $ hg parents -q
  5:b5e4babfaaa7
  $ hg bookmarks
     active-before-pull        3:483b76ad4309

  $ cd ..