tests/test-repo-compengines.t

infinitepush: use the new function to determine push destination

Since 066b8d8f75b8, the push command accept multiple destination. `infinitepush`
was not aware of that. We now use the new `urlutil.get_push_paths` function to
determine the push destination, fixing the issue. This will also make future
evolution of that logic transparent for infinitepush

We still disallow push to multiple destinations if infinite push is enabled
because I don't know what this means for infinite push. However user will now
get a clear error message instead of a crash.

Differential Revision: https://phab.mercurial-scm.org/D10379

A new repository uses zlib storage, which doesn't need a requirement

  $ cat << EOF >> $HGRCPATH
  > [format]
  > # stabilize test accross variant
  > revlog-compression=zlib
  > EOF


  $ hg init default
  $ cd default
  $ cat .hg/requires
  dotencode
  fncache
  generaldelta
  persistent-nodemap (rust !)
  revlogv1
  sparserevlog
  store
  testonly-simplestore (reposimplestore !)

  $ touch foo
  $ hg -q commit -A -m 'initial commit with a lot of repeated repeated repeated text to trigger compression'
  $ hg debugrevlog -c | grep 0x78
      0x78 (x)  :   1 (100.00%)
      0x78 (x)  : 110 (100.00%)

  $ cd ..

Unknown compression engine to format.compression aborts

  $ hg --config format.revlog-compression=unknown init unknown
  abort: compression engines "unknown" defined by format.revlog-compression not available
  (run "hg debuginstall" to list available compression engines)
  [255]

unknown compression engine in a list with known one works fine

  $ hg --config format.revlog-compression=zlib,unknown init zlib-before-unknow
  $ hg --config format.revlog-compression=unknown,zlib init unknown-before-zlib

A requirement specifying an unknown compression engine results in bail

  $ hg init unknownrequirement
  $ cd unknownrequirement
  $ echo exp-compression-unknown >> .hg/requires
  $ hg log
  abort: repository requires features unknown to this Mercurial: exp-compression-unknown
  (see https://mercurial-scm.org/wiki/MissingRequirement for more information)
  [255]

  $ cd ..

Specifying a new format.compression on an existing repo won't introduce data
with that engine or a requirement

  $ cd default
  $ touch bar
  $ hg --config format.revlog-compression=none -q commit -A -m 'add bar with a lot of repeated repeated repeated text'

  $ cat .hg/requires
  dotencode
  fncache
  generaldelta
  persistent-nodemap (rust !)
  revlogv1
  sparserevlog
  store
  testonly-simplestore (reposimplestore !)

  $ hg debugrevlog -c | grep 0x78
      0x78 (x)  :   2 (100.00%)
      0x78 (x)  : 199 (100.00%)
  $ cd ..

#if zstd

  $ hg --config format.revlog-compression=zstd init zstd
  $ cd zstd
  $ cat .hg/requires
  dotencode
  fncache
  generaldelta
  persistent-nodemap (rust !)
  revlog-compression-zstd
  revlogv1
  sparserevlog
  store
  testonly-simplestore (reposimplestore !)

  $ touch foo
  $ hg -q commit -A -m 'initial commit with a lot of repeated repeated repeated text'

  $ hg debugrevlog -c | grep 0x28
      0x28      :  1 (100.00%)
      0x28      : 98 (100.00%)

  $ cd ..


#endif

checking zlib options
=====================

  $ hg init zlib-level-default
  $ hg init zlib-level-1
  $ cat << EOF >> zlib-level-1/.hg/hgrc
  > [storage]
  > revlog.zlib.level=1
  > EOF
  $ hg init zlib-level-9
  $ cat << EOF >> zlib-level-9/.hg/hgrc
  > [storage]
  > revlog.zlib.level=9
  > EOF


  $ commitone() {
  >    repo=$1
  >    cp $RUNTESTDIR/bundles/issue4438-r1.hg $repo/a
  >    hg -R $repo add $repo/a
  >    hg -R $repo commit -m some-commit
  > }

  $ for repo in zlib-level-default zlib-level-1 zlib-level-9; do
  >     commitone $repo
  > done

  $ $RUNTESTDIR/f -s */.hg/store/data/*
  default/.hg/store/data/bar.i: size=64
  default/.hg/store/data/foo.i: size=64
  zlib-level-1/.hg/store/data/a.i: size=4146
  zlib-level-9/.hg/store/data/a.i: size=4138
  zlib-level-default/.hg/store/data/a.i: size=4138
  zstd/.hg/store/data/foo.i: size=64 (zstd !)

Test error cases

  $ hg init zlib-level-invalid
  $ cat << EOF >> zlib-level-invalid/.hg/hgrc
  > [storage]
  > revlog.zlib.level=foobar
  > EOF
  $ commitone zlib-level-invalid
  config error: storage.revlog.zlib.level is not a valid integer ('foobar')
  config error: storage.revlog.zlib.level is not a valid integer ('foobar')
  [30]

  $ hg init zlib-level-out-of-range
  $ cat << EOF >> zlib-level-out-of-range/.hg/hgrc
  > [storage]
  > revlog.zlib.level=42
  > EOF

  $ commitone zlib-level-out-of-range
  abort: invalid value for `storage.revlog.zlib.level` config: 42
  abort: invalid value for `storage.revlog.zlib.level` config: 42
  [255]

checking details of none compression
====================================

  $ hg init none-compression --config format.revlog-compression=none

  $ commitone() {
  >    repo=$1
  >    cp $RUNTESTDIR/bundles/issue4438-r1.hg $repo/a
  >    hg -R $repo add $repo/a
  >    hg -R $repo commit -m some-commit
  > }

  $ commitone none-compression

  $ hg log -R none-compression
  changeset:   0:68b53da39cd8
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     some-commit
  

  $ cat none-compression/.hg/requires
  dotencode
  exp-compression-none
  fncache
  generaldelta
  persistent-nodemap (rust !)
  revlogv1
  sparserevlog
  store
  testonly-simplestore (reposimplestore !)

  $ $RUNTESTDIR/f -s none-compression/.hg/store/data/*
  none-compression/.hg/store/data/a.i: size=4216

#if zstd

checking zstd options
=====================

  $ hg init zstd-level-default --config format.revlog-compression=zstd
  $ hg init zstd-level-1 --config format.revlog-compression=zstd
  $ cat << EOF >> zstd-level-1/.hg/hgrc
  > [storage]
  > revlog.zstd.level=1
  > EOF
  $ hg init zstd-level-22 --config format.revlog-compression=zstd
  $ cat << EOF >> zstd-level-22/.hg/hgrc
  > [storage]
  > revlog.zstd.level=22
  > EOF


  $ commitone() {
  >    repo=$1
  >    cp $RUNTESTDIR/bundles/issue4438-r1.hg $repo/a
  >    hg -R $repo add $repo/a
  >    hg -R $repo commit -m some-commit
  > }

  $ for repo in zstd-level-default zstd-level-1 zstd-level-22; do
  >     commitone $repo
  > done

  $ $RUNTESTDIR/f -s zstd-*/.hg/store/data/*
  zstd-level-1/.hg/store/data/a.i: size=4114
  zstd-level-22/.hg/store/data/a.i: size=4091
  zstd-level-default/\.hg/store/data/a\.i: size=(4094|4102) (re)

Test error cases

  $ hg init zstd-level-invalid --config format.revlog-compression=zstd
  $ cat << EOF >> zstd-level-invalid/.hg/hgrc
  > [storage]
  > revlog.zstd.level=foobar
  > EOF
  $ commitone zstd-level-invalid
  config error: storage.revlog.zstd.level is not a valid integer ('foobar')
  config error: storage.revlog.zstd.level is not a valid integer ('foobar')
  [30]

  $ hg init zstd-level-out-of-range --config format.revlog-compression=zstd
  $ cat << EOF >> zstd-level-out-of-range/.hg/hgrc
  > [storage]
  > revlog.zstd.level=42
  > EOF

  $ commitone zstd-level-out-of-range
  abort: invalid value for `storage.revlog.zstd.level` config: 42
  abort: invalid value for `storage.revlog.zstd.level` config: 42
  [255]

#endif