Mercurial > hg
view hgext/share.py @ 33619:609606d21765
rebase: use one dirstateguard for when using rebase.singletransaction
This was previously landed as 2519994d25ca but backed out in b63351f6a2 because
it broke hooks mid-rebase and caused conflict resolution data loss in the event
of unexpected exceptions. This new version adds the behavior back but behind a
config flag, since the performance improvement is notable in large repositories.
The old commit message was:
Recently we switched rebases to run the entire rebase inside a single
transaction, which dramatically improved the speed of rebases in repos with
large working copies. Let's also move the dirstate into a single dirstateguard
to get the same benefits. This let's us avoid serializing the dirstate after
each commit.
In a large repo, rebasing 27 commits is sped up by about 20%.
I believe the test changes are because us touching the dirstate gave the
transaction something to actually rollback.
(grafted from 9e3dc3a1638b9754b58a0cb26aaa75d868058109)
(grafted from 7d38b41d2266d9a02a15c64229fae0da5738dcec)
Differential Revision: https://phab.mercurial-scm.org/D135
author | Durham Goode <durham@fb.com> |
---|---|
date | Thu, 20 Jul 2017 01:30:41 -0700 |
parents | 3325c7dcabaa |
children | f9734580f2b6 |
line wrap: on
line source
# Copyright 2006, 2007 Matt Mackall <mpm@selenic.com> # # This software may be used and distributed according to the terms of the # GNU General Public License version 2 or any later version. '''share a common history between several working directories Automatic Pooled Storage for Clones ----------------------------------- When this extension is active, :hg:`clone` can be configured to automatically share/pool storage across multiple clones. This mode effectively converts :hg:`clone` to :hg:`clone` + :hg:`share`. The benefit of using this mode is the automatic management of store paths and intelligent pooling of related repositories. The following ``share.`` config options influence this feature: ``share.pool`` Filesystem path where shared repository data will be stored. When defined, :hg:`clone` will automatically use shared repository storage instead of creating a store inside each clone. ``share.poolnaming`` How directory names in ``share.pool`` are constructed. "identity" means the name is derived from the first changeset in the repository. In this mode, different remotes share storage if their root/initial changeset is identical. In this mode, the local shared repository is an aggregate of all encountered remote repositories. "remote" means the name is derived from the source repository's path or URL. In this mode, storage is only shared if the path or URL requested in the :hg:`clone` command matches exactly to a repository that was cloned before. The default naming mode is "identity." ''' from __future__ import absolute_import import errno from mercurial.i18n import _ from mercurial import ( bookmarks, commands, error, extensions, hg, registrar, txnutil, util, ) repository = hg.repository parseurl = hg.parseurl cmdtable = {} command = registrar.command(cmdtable) # Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for # extensions which SHIP WITH MERCURIAL. Non-mainline extensions should # be specifying the version(s) of Mercurial they are tested with, or # leave the attribute unspecified. testedwith = 'ships-with-hg-core' @command('share', [('U', 'noupdate', None, _('do not create a working directory')), ('B', 'bookmarks', None, _('also share bookmarks')), ('', 'relative', None, _('point to source using a relative path ' '(EXPERIMENTAL)')), ], _('[-U] [-B] SOURCE [DEST]'), norepo=True) def share(ui, source, dest=None, noupdate=False, bookmarks=False, relative=False): """create a new shared repository Initialize a new repository and working directory that shares its history (and optionally bookmarks) with another repository. .. note:: using rollback or extensions that destroy/modify history (mq, rebase, etc.) can cause considerable confusion with shared clones. In particular, if two shared clones are both updated to the same changeset, and one of them destroys that changeset with rollback, the other clone will suddenly stop working: all operations will fail with "abort: working directory has unknown parent". The only known workaround is to use debugsetparents on the broken clone to reset it to a changeset that still exists. """ return hg.share(ui, source, dest=dest, update=not noupdate, bookmarks=bookmarks, relative=relative) @command('unshare', [], '') def unshare(ui, repo): """convert a shared repository to a normal one Copy the store data to the repo and remove the sharedpath data. """ if not repo.shared(): raise error.Abort(_("this is not a shared repo")) destlock = lock = None lock = repo.lock() try: # we use locks here because if we race with commit, we # can end up with extra data in the cloned revlogs that's # not pointed to by changesets, thus causing verify to # fail destlock = hg.copystore(ui, repo, repo.path) sharefile = repo.vfs.join('sharedpath') util.rename(sharefile, sharefile + '.old') repo.requirements.discard('shared') repo.requirements.discard('relshared') repo._writerequirements() finally: destlock and destlock.release() lock and lock.release() # update store, spath, svfs and sjoin of repo repo.unfiltered().__init__(repo.baseui, repo.root) # Wrap clone command to pass auto share options. def clone(orig, ui, source, *args, **opts): pool = ui.config('share', 'pool', None) if pool: pool = util.expandpath(pool) opts[r'shareopts'] = { 'pool': pool, 'mode': ui.config('share', 'poolnaming', 'identity'), } return orig(ui, source, *args, **opts) def extsetup(ui): extensions.wrapfunction(bookmarks, '_getbkfile', getbkfile) extensions.wrapfunction(bookmarks.bmstore, '_recordchange', recordchange) extensions.wrapfunction(bookmarks.bmstore, '_writerepo', writerepo) extensions.wrapcommand(commands.table, 'clone', clone) def _hassharedbookmarks(repo): """Returns whether this repo has shared bookmarks""" try: shared = repo.vfs.read('shared').splitlines() except IOError as inst: if inst.errno != errno.ENOENT: raise return False return hg.sharedbookmarks in shared def _getsrcrepo(repo): """ Returns the source repository object for a given shared repository. If repo is not a shared repository, return None. """ if repo.sharedpath == repo.path: return None if util.safehasattr(repo, 'srcrepo') and repo.srcrepo: return repo.srcrepo # the sharedpath always ends in the .hg; we want the path to the repo source = repo.vfs.split(repo.sharedpath)[0] srcurl, branches = parseurl(source) srcrepo = repository(repo.ui, srcurl) repo.srcrepo = srcrepo return srcrepo def getbkfile(orig, repo): if _hassharedbookmarks(repo): srcrepo = _getsrcrepo(repo) if srcrepo is not None: # just orig(srcrepo) doesn't work as expected, because # HG_PENDING refers repo.root. try: fp, pending = txnutil.trypending(repo.root, repo.vfs, 'bookmarks') if pending: # only in this case, bookmark information in repo # is up-to-date. return fp fp.close() except IOError as inst: if inst.errno != errno.ENOENT: raise # otherwise, we should read bookmarks from srcrepo, # because .hg/bookmarks in srcrepo might be already # changed via another sharing repo repo = srcrepo # TODO: Pending changes in repo are still invisible in # srcrepo, because bookmarks.pending is written only into repo. # See also https://www.mercurial-scm.org/wiki/SharedRepository return orig(repo) def recordchange(orig, self, tr): # Continue with write to local bookmarks file as usual orig(self, tr) if _hassharedbookmarks(self._repo): srcrepo = _getsrcrepo(self._repo) if srcrepo is not None: category = 'share-bookmarks' tr.addpostclose(category, lambda tr: self._writerepo(srcrepo)) def writerepo(orig, self, repo): # First write local bookmarks file in case we ever unshare orig(self, repo) if _hassharedbookmarks(self._repo): srcrepo = _getsrcrepo(self._repo) if srcrepo is not None: orig(self, srcrepo)