store: add a `target_id` attribute on RevlogStoreEntry
This hold the "target" (file, directory, etc) of a revlog. Having this
available will help a lot of code to avoid direct file path access.
This file used to contains all largefile tests.
Do not add any new tests in this file as it his already far too long to run.
It contains all the testing of the basic concepts of large file in a single block.
$ USERCACHE="$TESTTMP/cache"; export USERCACHE
$ mkdir "${USERCACHE}"
$ cat >> $HGRCPATH <<EOF
> [extensions]
> largefiles=
> purge=
> rebase=
> transplant=
> [phases]
> publish=False
> [largefiles]
> minsize=2
> patterns=glob:**.dat
> usercache=${USERCACHE}
> [hooks]
> precommit=sh -c "echo \\"Invoking status precommit hook\\"; hg status"
> EOF
Create the repo with a couple of revisions of both large and normal
files.
Test status and dirstate of largefiles and that summary output is correct.
$ hg init a
$ cd a
$ mkdir sub
$ echo normal1 > normal1
$ echo normal2 > sub/normal2
$ echo large1 > large1
$ echo large2 > sub/large2
$ hg add normal1 sub/normal2
$ hg add --large large1 sub/large2
$ hg commit -m "add files"
Invoking status precommit hook
A large1
A normal1
A sub/large2
A sub/normal2
$ touch large1 sub/large2
$ sleep 1
$ hg st
$ hg debugstate --no-dates
n 644 41 set .hglf/large1
n 644 41 set .hglf/sub/large2
n 644 8 set normal1
n 644 8 set sub/normal2
$ hg debugstate --large --no-dates
n 644 7 set large1
n 644 7 set sub/large2
$ echo normal11 > normal1
$ echo normal22 > sub/normal2
$ echo large11 > large1
$ echo large22 > sub/large2
$ hg commit -m "edit files"
Invoking status precommit hook
M large1
M normal1
M sub/large2
M sub/normal2
$ hg sum --large
parent: 1:ce8896473775 tip
edit files
branch: default
commit: (clean)
update: (current)
phases: 2 draft
largefiles: (no remote repo)
Commit preserved largefile contents.
$ cat normal1
normal11
$ cat large1
large11
$ cat sub/normal2
normal22
$ cat sub/large2
large22
Test status, subdir and unknown files
$ echo unknown > sub/unknown
$ hg st --all
? sub/unknown
C large1
C normal1
C sub/large2
C sub/normal2
$ hg st --all sub
? sub/unknown
C sub/large2
C sub/normal2
$ rm sub/unknown
Test messages and exit codes for remove warning cases
$ hg remove -A large1
not removing large1: file still exists
[1]
$ echo 'modified' > large1
$ hg remove large1
not removing large1: file is modified (use -f to force removal)
[1]
$ echo 'new' > normalnew
$ hg add normalnew
$ echo 'new' > largenew
$ hg add --large normalnew
normalnew already tracked!
$ hg remove normalnew largenew
not removing largenew: file is untracked
not removing normalnew: file has been marked for add (use 'hg forget' to undo add)
[1]
$ rm normalnew largenew
$ hg up -Cq
Remove both largefiles and normal files.
$ hg remove normal1 large1
$ hg status large1
R large1
$ hg commit -m "remove files"
Invoking status precommit hook
R large1
R normal1
$ ls -A
.hg
.hglf
sub
$ echo "testlargefile" > large1-test
$ hg add --large large1-test
$ hg st
A large1-test
$ hg rm large1-test
not removing large1-test: file has been marked for add (use forget to undo)
[1]
$ hg st
A large1-test
$ hg forget large1-test
$ hg st
? large1-test
$ hg remove large1-test
not removing large1-test: file is untracked
[1]
$ hg forget large1-test
not removing large1-test: file is already untracked
[1]
$ rm large1-test
Copy both largefiles and normal files (testing that status output is correct).
$ hg cp sub/normal2 normal1
$ hg cp sub/large2 large1
$ hg commit -m "copy files"
Invoking status precommit hook
A large1
A normal1
$ cat normal1
normal22
$ cat large1
large22
Test moving largefiles and verify that normal files are also unaffected.
$ hg mv normal1 normal3
$ hg mv large1 large3
$ hg mv sub/normal2 sub/normal4
$ hg mv sub/large2 sub/large4
$ hg commit -m "move files"
Invoking status precommit hook
A large3
A normal3
A sub/large4
A sub/normal4
R large1
R normal1
R sub/large2
R sub/normal2
$ cat normal3
normal22
$ cat large3
large22
$ cat sub/normal4
normal22
$ cat sub/large4
large22
#if serve
Test display of largefiles in hgweb
$ hg serve -d -p $HGPORT --pid-file ../hg.pid
$ cat ../hg.pid >> $DAEMON_PIDS
$ get-with-headers.py $LOCALIP:$HGPORT 'file/tip/?style=raw'
200 Script output follows
drwxr-xr-x sub
-rw-r--r-- 41 large3
-rw-r--r-- 9 normal3
$ get-with-headers.py $LOCALIP:$HGPORT 'file/tip/sub/?style=raw'
200 Script output follows
-rw-r--r-- 41 large4
-rw-r--r-- 9 normal4
$ killdaemons.py
#endif
Test largefiles can be loaded in hgweb (wrapcommand() shouldn't fail)
$ cat <<EOF > "$TESTTMP/hgweb.cgi"
> #!$PYTHON
> from mercurial import demandimport; demandimport.enable()
> from mercurial.hgweb import hgweb
> from mercurial.hgweb import wsgicgi
> application = hgweb(b'.', b'test repo')
> wsgicgi.launch(application)
> EOF
$ . "$TESTDIR/cgienv"
$ SCRIPT_NAME='' \
> "$PYTHON" "$TESTTMP/hgweb.cgi" > /dev/null
Test archiving the various revisions. These hit corner cases known with
archiving.
$ hg archive -r 0 ../archive0
$ hg archive -r 1 ../archive1
$ hg archive -r 2 ../archive2
$ hg archive -r 3 ../archive3
$ hg archive -r 4 ../archive4
$ cd ../archive0
$ cat normal1
normal1
$ cat large1
large1
$ cat sub/normal2
normal2
$ cat sub/large2
large2
$ cd ../archive1
$ cat normal1
normal11
$ cat large1
large11
$ cat sub/normal2
normal22
$ cat sub/large2
large22
$ cd ../archive2
$ ls -A
.hg_archival.txt
sub
$ cat sub/normal2
normal22
$ cat sub/large2
large22
$ cd ../archive3
$ cat normal1
normal22
$ cat large1
large22
$ cat sub/normal2
normal22
$ cat sub/large2
large22
$ cd ../archive4
$ cat normal3
normal22
$ cat large3
large22
$ cat sub/normal4
normal22
$ cat sub/large4
large22
Commit corner case: specify files to commit.
$ cd ../a
$ echo normal3 > normal3
$ echo large3 > large3
$ echo normal4 > sub/normal4
$ echo large4 > sub/large4
$ hg commit normal3 large3 sub/normal4 sub/large4 -m "edit files again"
Invoking status precommit hook
M large3
M normal3
M sub/large4
M sub/normal4
$ cat normal3
normal3
$ cat large3
large3
$ cat sub/normal4
normal4
$ cat sub/large4
large4
One more commit corner case: commit from a subdirectory.
$ cd ../a
$ echo normal33 > normal3
$ echo large33 > large3
$ echo normal44 > sub/normal4
$ echo large44 > sub/large4
$ cd sub
$ hg commit -m "edit files yet again"
Invoking status precommit hook
M large3
M normal3
M sub/large4
M sub/normal4
$ cat ../normal3
normal33
$ cat ../large3
large33
$ cat normal4
normal44
$ cat large4
large44
Committing standins is not allowed.
$ cd ..
$ echo large3 > large3
$ hg commit .hglf/large3 -m "try to commit standin"
abort: file ".hglf/large3" is a largefile standin
(commit the largefile itself instead)
[255]
Corner cases for adding largefiles.
$ echo large5 > large5
$ hg add --large large5
$ hg add --large large5
large5 already a largefile
$ mkdir sub2
$ echo large6 > sub2/large6
$ echo large7 > sub2/large7
$ hg add --large sub2
adding sub2/large6 as a largefile
adding sub2/large7 as a largefile
$ hg st
M large3
A large5
A sub2/large6
A sub2/large7
Committing directories containing only largefiles.
$ mkdir -p z/y/x/m
$ touch z/y/x/m/large1
$ touch z/y/x/large2
$ hg add --large z/y/x/m/large1 z/y/x/large2
$ hg commit -m "Subdir with directory only containing largefiles" z
Invoking status precommit hook
M large3
A large5
A sub2/large6
A sub2/large7
A z/y/x/large2
A z/y/x/m/large1
(and a bit of log testing)
$ hg log -T '{rev}\n' z/y/x/m/large1
7
$ hg log -T '{rev}\n' z/y/x/m # with only a largefile
7
$ hg rollback --quiet
$ touch z/y/x/m/normal
$ hg add z/y/x/m/normal
$ hg commit -m "Subdir with mixed contents" z
Invoking status precommit hook
M large3
A large5
A sub2/large6
A sub2/large7
A z/y/x/large2
A z/y/x/m/large1
A z/y/x/m/normal
$ hg st
M large3
A large5
A sub2/large6
A sub2/large7
$ hg rollback --quiet
$ hg revert z/y/x/large2 z/y/x/m/large1
$ rm z/y/x/large2 z/y/x/m/large1
$ hg commit -m "Subdir with normal contents" z
Invoking status precommit hook
M large3
A large5
A sub2/large6
A sub2/large7
A z/y/x/m/normal
$ hg st
M large3
A large5
A sub2/large6
A sub2/large7
$ hg rollback --quiet
$ hg revert --quiet z
$ hg commit -m "Empty subdir" z
abort: z: no match under directory!
[10]
$ rm -rf z
$ hg ci -m "standin" .hglf
abort: file ".hglf" is a largefile standin
(commit the largefile itself instead)
[255]
Test "hg status" with combination of 'file pattern' and 'directory
pattern' for largefiles:
$ hg status sub2/large6 sub2
A sub2/large6
A sub2/large7
Config settings (pattern **.dat, minsize 2 MB) are respected.
$ echo testdata > test.dat
$ dd bs=1k count=2k if=/dev/zero of=reallylarge > /dev/null 2> /dev/null
$ hg add
adding reallylarge as a largefile
adding test.dat as a largefile
Test that minsize and --lfsize handle float values;
also tests that --lfsize overrides largefiles.minsize.
(0.250 MB = 256 kB = 262144 B)
$ dd if=/dev/zero of=ratherlarge bs=1024 count=256 > /dev/null 2> /dev/null
$ dd if=/dev/zero of=medium bs=1024 count=128 > /dev/null 2> /dev/null
$ hg --config largefiles.minsize=.25 add
adding ratherlarge as a largefile
adding medium
$ hg forget medium
$ hg --config largefiles.minsize=.25 add --lfsize=.125
adding medium as a largefile
$ dd if=/dev/zero of=notlarge bs=1024 count=127 > /dev/null 2> /dev/null
$ hg --config largefiles.minsize=.25 add --lfsize=.125
adding notlarge
$ hg forget notlarge
Test forget on largefiles.
$ hg forget large3 large5 test.dat reallylarge ratherlarge medium
$ hg commit -m "add/edit more largefiles"
Invoking status precommit hook
A sub2/large6
A sub2/large7
R large3
? large5
? medium
? notlarge
? ratherlarge
? reallylarge
? test.dat
$ hg st
? large3
? large5
? medium
? notlarge
? ratherlarge
? reallylarge
? test.dat
Purge with largefiles: verify that largefiles are still in the working
dir after a purge.
$ hg purge --all
$ cat sub/large4
large44
$ cat sub2/large6
large6
$ cat sub2/large7
large7
Test addremove: verify that files that should be added as largefiles are added as
such and that already-existing largefiles are not added as normal files by
accident.
$ rm normal3
$ rm sub/large4
$ echo "testing addremove with patterns" > testaddremove.dat
$ echo "normaladdremove" > normaladdremove
$ hg addremove
removing sub/large4
adding testaddremove.dat as a largefile
removing normal3
adding normaladdremove
Test addremove with -R
$ hg up -C
getting changed largefiles
1 largefiles updated, 0 removed
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm normal3
$ rm sub/large4
$ echo "testing addremove with patterns" > testaddremove.dat
$ echo "normaladdremove" > normaladdremove
$ cd ..
$ hg -R a -v addremove
removing sub/large4
adding testaddremove.dat as a largefile
removing normal3
adding normaladdremove
$ cd a
Test 3364
$ hg clone . ../addrm
updating to branch default
getting changed largefiles
3 largefiles updated, 0 removed
5 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd ../addrm
$ cat >> .hg/hgrc <<EOF
> [hooks]
> post-commit.stat=sh -c "echo \\"Invoking status postcommit hook\\"; hg status -A"
> EOF
$ touch foo
$ hg add --large foo
$ hg ci -m "add foo"
Invoking status precommit hook
A foo
Invoking status postcommit hook
C foo
C normal3
C sub/large4
C sub/normal4
C sub2/large6
C sub2/large7
$ rm foo
$ hg st
! foo
hmm.. no precommit invoked, but there is a postcommit??
$ hg ci -m "will not checkin"
nothing changed (1 missing files, see 'hg status')
Invoking status postcommit hook
! foo
C normal3
C sub/large4
C sub/normal4
C sub2/large6
C sub2/large7
[1]
$ hg addremove
removing foo
$ hg st
R foo
$ hg ci -m "used to say nothing changed"
Invoking status precommit hook
R foo
Invoking status postcommit hook
C normal3
C sub/large4
C sub/normal4
C sub2/large6
C sub2/large7
$ hg st
Test 3507 (both normal files and largefiles were a problem)
$ touch normal
$ touch large
$ hg add normal
$ hg add --large large
$ hg ci -m "added"
Invoking status precommit hook
A large
A normal
Invoking status postcommit hook
C large
C normal
C normal3
C sub/large4
C sub/normal4
C sub2/large6
C sub2/large7
$ hg remove normal
$ hg addremove --traceback
$ hg ci -m "addremoved normal"
Invoking status precommit hook
R normal
Invoking status postcommit hook
C large
C normal3
C sub/large4
C sub/normal4
C sub2/large6
C sub2/large7
$ hg up -C '.^'
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg remove large
$ hg addremove --traceback
$ hg ci -m "removed large"
Invoking status precommit hook
R large
created new head
Invoking status postcommit hook
C normal
C normal3
C sub/large4
C sub/normal4
C sub2/large6
C sub2/large7
Test commit -A (issue3542)
$ echo large8 > large8
$ hg add --large large8
$ hg ci -Am 'this used to add large8 as normal and commit both'
Invoking status precommit hook
A large8
Invoking status postcommit hook
C large8
C normal
C normal3
C sub/large4
C sub/normal4
C sub2/large6
C sub2/large7
$ rm large8
$ hg ci -Am 'this used to not notice the rm'
removing large8
Invoking status precommit hook
R large8
Invoking status postcommit hook
C normal
C normal3
C sub/large4
C sub/normal4
C sub2/large6
C sub2/large7
Test that a standin can't be added as a large file
$ touch large
$ hg add --large large
$ hg ci -m "add"
Invoking status precommit hook
A large
Invoking status postcommit hook
C large
C normal
C normal3
C sub/large4
C sub/normal4
C sub2/large6
C sub2/large7
$ hg remove large
$ touch large
$ hg addremove --config largefiles.patterns=**large --traceback
adding large as a largefile
Test that outgoing --large works (with revsets too)
$ hg outgoing --rev '.^' --large
comparing with $TESTTMP/a
searching for changes
changeset: 8:c02fd3b77ec4
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: add foo
changeset: 9:289dd08c9bbb
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: used to say nothing changed
changeset: 10:34f23ac6ac12
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: added
changeset: 12:710c1b2f523c
parent: 10:34f23ac6ac12
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: removed large
changeset: 13:0a3e75774479
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: this used to add large8 as normal and commit both
changeset: 14:84f3d378175c
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: this used to not notice the rm
largefiles to upload (1 entities):
large8
$ cd ../a
Clone a largefiles repo.
$ hg clone . ../b
updating to branch default
getting changed largefiles
3 largefiles updated, 0 removed
5 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd ../b
$ hg log --template '{rev}:{node|short} {desc|firstline}\n'
7:daea875e9014 add/edit more largefiles
6:4355d653f84f edit files yet again
5:9d5af5072dbd edit files again
4:74c02385b94c move files
3:9e8fbc4bce62 copy files
2:51a0ae4d5864 remove files
1:ce8896473775 edit files
0:30d30fe6a5be add files
$ cat normal3
normal33
Test graph log
$ hg log -G --template '{rev}:{node|short} {desc|firstline}\n'
@ 7:daea875e9014 add/edit more largefiles
|
o 6:4355d653f84f edit files yet again
|
o 5:9d5af5072dbd edit files again
|
o 4:74c02385b94c move files
|
o 3:9e8fbc4bce62 copy files
|
o 2:51a0ae4d5864 remove files
|
o 1:ce8896473775 edit files
|
o 0:30d30fe6a5be add files
Test log with --patch
$ hg log --patch -r 6::7
changeset: 6:4355d653f84f
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: edit files yet again
diff -r 9d5af5072dbd -r 4355d653f84f .hglf/large3
--- a/.hglf/large3 Thu Jan 01 00:00:00 1970 +0000
+++ b/.hglf/large3 Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +1,1 @@
-baaf12afde9d8d67f25dab6dced0d2bf77dba47c
+7838695e10da2bb75ac1156565f40a2595fa2fa0
diff -r 9d5af5072dbd -r 4355d653f84f .hglf/sub/large4
--- a/.hglf/sub/large4 Thu Jan 01 00:00:00 1970 +0000
+++ b/.hglf/sub/large4 Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +1,1 @@
-aeb2210d19f02886dde00dac279729a48471e2f9
+971fb41e78fea4f8e0ba5244784239371cb00591
diff -r 9d5af5072dbd -r 4355d653f84f normal3
--- a/normal3 Thu Jan 01 00:00:00 1970 +0000
+++ b/normal3 Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +1,1 @@
-normal3
+normal33
diff -r 9d5af5072dbd -r 4355d653f84f sub/normal4
--- a/sub/normal4 Thu Jan 01 00:00:00 1970 +0000
+++ b/sub/normal4 Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +1,1 @@
-normal4
+normal44
changeset: 7:daea875e9014
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: add/edit more largefiles
diff -r 4355d653f84f -r daea875e9014 .hglf/large3
--- a/.hglf/large3 Thu Jan 01 00:00:00 1970 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +0,0 @@
-7838695e10da2bb75ac1156565f40a2595fa2fa0
diff -r 4355d653f84f -r daea875e9014 .hglf/sub2/large6
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/.hglf/sub2/large6 Thu Jan 01 00:00:00 1970 +0000
@@ -0,0 +1,1 @@
+0d6d75887db61b2c7e6c74b5dd8fc6ad50c0cc30
diff -r 4355d653f84f -r daea875e9014 .hglf/sub2/large7
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/.hglf/sub2/large7 Thu Jan 01 00:00:00 1970 +0000
@@ -0,0 +1,1 @@
+bb3151689acb10f0c3125c560d5e63df914bc1af
$ hg log --patch -r 6::7 sub/
changeset: 6:4355d653f84f
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: edit files yet again
diff -r 9d5af5072dbd -r 4355d653f84f .hglf/sub/large4
--- a/.hglf/sub/large4 Thu Jan 01 00:00:00 1970 +0000
+++ b/.hglf/sub/large4 Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +1,1 @@
-aeb2210d19f02886dde00dac279729a48471e2f9
+971fb41e78fea4f8e0ba5244784239371cb00591
diff -r 9d5af5072dbd -r 4355d653f84f sub/normal4
--- a/sub/normal4 Thu Jan 01 00:00:00 1970 +0000
+++ b/sub/normal4 Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +1,1 @@
-normal4
+normal44
log with both --follow and --patch
$ hg log --follow --patch --limit 2
changeset: 7:daea875e9014
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: add/edit more largefiles
diff -r 4355d653f84f -r daea875e9014 .hglf/large3
--- a/.hglf/large3 Thu Jan 01 00:00:00 1970 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +0,0 @@
-7838695e10da2bb75ac1156565f40a2595fa2fa0
diff -r 4355d653f84f -r daea875e9014 .hglf/sub2/large6
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/.hglf/sub2/large6 Thu Jan 01 00:00:00 1970 +0000
@@ -0,0 +1,1 @@
+0d6d75887db61b2c7e6c74b5dd8fc6ad50c0cc30
diff -r 4355d653f84f -r daea875e9014 .hglf/sub2/large7
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/.hglf/sub2/large7 Thu Jan 01 00:00:00 1970 +0000
@@ -0,0 +1,1 @@
+bb3151689acb10f0c3125c560d5e63df914bc1af
changeset: 6:4355d653f84f
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: edit files yet again
diff -r 9d5af5072dbd -r 4355d653f84f .hglf/large3
--- a/.hglf/large3 Thu Jan 01 00:00:00 1970 +0000
+++ b/.hglf/large3 Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +1,1 @@
-baaf12afde9d8d67f25dab6dced0d2bf77dba47c
+7838695e10da2bb75ac1156565f40a2595fa2fa0
diff -r 9d5af5072dbd -r 4355d653f84f .hglf/sub/large4
--- a/.hglf/sub/large4 Thu Jan 01 00:00:00 1970 +0000
+++ b/.hglf/sub/large4 Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +1,1 @@
-aeb2210d19f02886dde00dac279729a48471e2f9
+971fb41e78fea4f8e0ba5244784239371cb00591
diff -r 9d5af5072dbd -r 4355d653f84f normal3
--- a/normal3 Thu Jan 01 00:00:00 1970 +0000
+++ b/normal3 Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +1,1 @@
-normal3
+normal33
diff -r 9d5af5072dbd -r 4355d653f84f sub/normal4
--- a/sub/normal4 Thu Jan 01 00:00:00 1970 +0000
+++ b/sub/normal4 Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +1,1 @@
-normal4
+normal44
$ hg log --follow --patch sub/large4
changeset: 6:4355d653f84f
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: edit files yet again
diff -r 9d5af5072dbd -r 4355d653f84f .hglf/sub/large4
--- a/.hglf/sub/large4 Thu Jan 01 00:00:00 1970 +0000
+++ b/.hglf/sub/large4 Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +1,1 @@
-aeb2210d19f02886dde00dac279729a48471e2f9
+971fb41e78fea4f8e0ba5244784239371cb00591
changeset: 5:9d5af5072dbd
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: edit files again
diff -r 74c02385b94c -r 9d5af5072dbd .hglf/sub/large4
--- a/.hglf/sub/large4 Thu Jan 01 00:00:00 1970 +0000
+++ b/.hglf/sub/large4 Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +1,1 @@
-eb7338044dc27f9bc59b8dd5a246b065ead7a9c4
+aeb2210d19f02886dde00dac279729a48471e2f9
changeset: 4:74c02385b94c
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: move files
diff -r 9e8fbc4bce62 -r 74c02385b94c .hglf/sub/large4
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/.hglf/sub/large4 Thu Jan 01 00:00:00 1970 +0000
@@ -0,0 +1,1 @@
+eb7338044dc27f9bc59b8dd5a246b065ead7a9c4
changeset: 1:ce8896473775
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: edit files
diff -r 30d30fe6a5be -r ce8896473775 .hglf/sub/large2
--- a/.hglf/sub/large2 Thu Jan 01 00:00:00 1970 +0000
+++ b/.hglf/sub/large2 Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +1,1 @@
-1deebade43c8c498a3c8daddac0244dc55d1331d
+eb7338044dc27f9bc59b8dd5a246b065ead7a9c4
changeset: 0:30d30fe6a5be
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: add files
diff -r 000000000000 -r 30d30fe6a5be .hglf/sub/large2
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/.hglf/sub/large2 Thu Jan 01 00:00:00 1970 +0000
@@ -0,0 +1,1 @@
+1deebade43c8c498a3c8daddac0244dc55d1331d
$ cat sub/normal4
normal44
$ cat sub/large4
large44
$ cat sub2/large6
large6
$ cat sub2/large7
large7
$ hg log -qf sub2/large7
7:daea875e9014
$ hg log -Gqf sub2/large7
@ 7:daea875e9014
|
~
$ cd ..
Test log from outside repo
$ hg log b/sub -T '{rev}:{node|short} {desc|firstline}\n'
6:4355d653f84f edit files yet again
5:9d5af5072dbd edit files again
4:74c02385b94c move files
1:ce8896473775 edit files
0:30d30fe6a5be add files
Test clone at revision
$ hg clone a -r 3 c
adding changesets
adding manifests
adding file changes
added 4 changesets with 10 changes to 4 files
new changesets 30d30fe6a5be:9e8fbc4bce62 (4 drafts)
updating to branch default
getting changed largefiles
2 largefiles updated, 0 removed
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd c
$ hg log --template '{rev}:{node|short} {desc|firstline}\n'
3:9e8fbc4bce62 copy files
2:51a0ae4d5864 remove files
1:ce8896473775 edit files
0:30d30fe6a5be add files
$ cat normal1
normal22
$ cat large1
large22
$ cat sub/normal2
normal22
$ cat sub/large2
large22
Old revisions of a clone have correct largefiles content (this also
tests update).
$ hg update -r 1
getting changed largefiles
1 largefiles updated, 0 removed
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cat large1
large11
$ cat sub/large2
large22
$ cd ..
Test cloning with --all-largefiles flag
$ rm "${USERCACHE}"/*
$ hg clone --all-largefiles a a-backup
updating to branch default
getting changed largefiles
3 largefiles updated, 0 removed
5 files updated, 0 files merged, 0 files removed, 0 files unresolved
7 additional largefiles cached
$ rm "${USERCACHE}"/*
$ hg clone --all-largefiles -u 0 a a-clone0
updating to branch default
getting changed largefiles
2 largefiles updated, 0 removed
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
8 additional largefiles cached
$ hg -R a-clone0 sum
parent: 0:30d30fe6a5be
add files
branch: default
commit: (clean)
update: 7 new changesets (update)
phases: 8 draft
$ rm "${USERCACHE}"/*
$ hg clone --all-largefiles -u 1 a a-clone1
updating to branch default
getting changed largefiles
2 largefiles updated, 0 removed
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
8 additional largefiles cached
$ hg -R a-clone1 verify --large --lfa --lfc -q
$ hg -R a-clone1 sum
parent: 1:ce8896473775
edit files
branch: default
commit: (clean)
update: 6 new changesets (update)
phases: 8 draft
$ rm "${USERCACHE}"/*
$ hg clone --all-largefiles -U a a-clone-u
10 additional largefiles cached
$ hg -R a-clone-u sum
parent: -1:000000000000 (no revision checked out)
branch: default
commit: (clean)
update: 8 new changesets (update)
phases: 8 draft
Show computed destination directory:
$ mkdir xyz
$ cd xyz
$ hg clone ../a
destination directory: a
updating to branch default
getting changed largefiles
3 largefiles updated, 0 removed
5 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd ..
Clone URL without path:
$ hg clone file://
abort: repository / not found
[255]
Ensure base clone command argument validation
$ hg clone -U -u 0 a a-clone-failure
abort: cannot specify both --noupdate and --updaterev
[10]
$ hg clone --all-largefiles a ssh://localhost/a
abort: --all-largefiles is incompatible with non-local destination ssh://localhost/a
[255]
Test pulling with --all-largefiles flag. Also test that the largefiles are
downloaded from 'default' instead of 'default-push' when no source is specified
(issue3584)
$ rm -Rf a-backup
$ hg clone -r 1 a a-backup
adding changesets
adding manifests
adding file changes
added 2 changesets with 8 changes to 4 files
new changesets 30d30fe6a5be:ce8896473775 (2 drafts)
updating to branch default
getting changed largefiles
2 largefiles updated, 0 removed
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm "${USERCACHE}"/*
$ cd a-backup
$ hg pull --all-largefiles --config paths.default-push=bogus/path
pulling from $TESTTMP/a
searching for changes
adding changesets
adding manifests
adding file changes
added 6 changesets with 16 changes to 8 files
new changesets 51a0ae4d5864:daea875e9014 (6 drafts)
(run 'hg update' to get a working copy)
6 largefiles cached
redo pull with --lfrev and check it pulls largefiles for the right revs
$ hg rollback
repository tip rolled back to revision 1 (undo pull)
$ hg pull -v --lfrev 'heads(pulled())+min(pulled())'
pulling from $TESTTMP/a
searching for changes
all local changesets known remotely
6 changesets found
uncompressed size of bundle content:
1401 (changelog)
1710 (manifests)
256 .hglf/large1
570 .hglf/large3
578 .hglf/sub/large4
184 .hglf/sub2/large6
184 .hglf/sub2/large7
214 normal1
463 normal3
471 sub/normal4
adding changesets
adding manifests
adding file changes
added 6 changesets with 16 changes to 8 files
new changesets 51a0ae4d5864:daea875e9014 (6 drafts)
calling hook changegroup.lfiles: hgext.largefiles.reposetup.checkrequireslfiles
(run 'hg update' to get a working copy)
pulling largefiles for revision 7
found 971fb41e78fea4f8e0ba5244784239371cb00591 in store
found 0d6d75887db61b2c7e6c74b5dd8fc6ad50c0cc30 in store
found bb3151689acb10f0c3125c560d5e63df914bc1af in store
pulling largefiles for revision 2
found eb7338044dc27f9bc59b8dd5a246b065ead7a9c4 in store
0 largefiles cached
lfpull
$ hg lfpull -r : --config largefiles.usercache=usercache-lfpull
2 largefiles cached
$ hg lfpull -v -r 4+2 --config largefiles.usercache=usercache-lfpull
pulling largefiles for revision 4
found eb7338044dc27f9bc59b8dd5a246b065ead7a9c4 in store
found eb7338044dc27f9bc59b8dd5a246b065ead7a9c4 in store
pulling largefiles for revision 2
found eb7338044dc27f9bc59b8dd5a246b065ead7a9c4 in store
0 largefiles cached
$ ls usercache-lfpull/* | sort
usercache-lfpull/1deebade43c8c498a3c8daddac0244dc55d1331d
usercache-lfpull/4669e532d5b2c093a78eca010077e708a071bb64
$ cd ..
Rebasing between two repositories does not revert largefiles to old
revisions (this was a very bad bug that took a lot of work to fix).
$ hg clone a d
updating to branch default
getting changed largefiles
3 largefiles updated, 0 removed
5 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd b
$ echo large4-modified > sub/large4
$ echo normal3-modified > normal3
$ hg commit -m "modify normal file and largefile in repo b"
Invoking status precommit hook
M normal3
M sub/large4
$ cd ../d
$ echo large6-modified > sub2/large6
$ echo normal4-modified > sub/normal4
$ hg commit -m "modify normal file largefile in repo d"
Invoking status precommit hook
M sub/normal4
M sub2/large6
$ cd ..
$ hg clone d e
updating to branch default
getting changed largefiles
3 largefiles updated, 0 removed
5 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd d
More rebase testing, but also test that the largefiles are downloaded from
'default-push' when no source is specified (issue3584). (The largefile from the
pulled revision is however not downloaded but found in the local cache.)
Largefiles are fetched for the new pulled revision, not for existing revisions,
rebased or not.
$ [ ! -f .hg/largefiles/e166e74c7303192238d60af5a9c4ce9bef0b7928 ]
$ hg pull --rebase --all-largefiles --config paths.default-push=bogus/path --config paths.default=../b
pulling from $TESTTMP/b
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 2 changes to 2 files (+1 heads)
new changesets a381d2c8c80e (1 drafts)
0 largefiles cached
rebasing 8:f574fb32bb45 "modify normal file largefile in repo d"
Invoking status precommit hook
M sub/normal4
M sub2/large6
saved backup bundle to $TESTTMP/d/.hg/strip-backup/f574fb32bb45-dd1d9f80-rebase.hg
$ [ -f .hg/largefiles/e166e74c7303192238d60af5a9c4ce9bef0b7928 ]
$ hg log --template '{rev}:{node|short} {desc|firstline}\n'
9:598410d3eb9a modify normal file largefile in repo d
8:a381d2c8c80e modify normal file and largefile in repo b
7:daea875e9014 add/edit more largefiles
6:4355d653f84f edit files yet again
5:9d5af5072dbd edit files again
4:74c02385b94c move files
3:9e8fbc4bce62 copy files
2:51a0ae4d5864 remove files
1:ce8896473775 edit files
0:30d30fe6a5be add files
$ hg log -G --template '{rev}:{node|short} {desc|firstline}\n'
@ 9:598410d3eb9a modify normal file largefile in repo d
|
o 8:a381d2c8c80e modify normal file and largefile in repo b
|
o 7:daea875e9014 add/edit more largefiles
|
o 6:4355d653f84f edit files yet again
|
o 5:9d5af5072dbd edit files again
|
o 4:74c02385b94c move files
|
o 3:9e8fbc4bce62 copy files
|
o 2:51a0ae4d5864 remove files
|
o 1:ce8896473775 edit files
|
o 0:30d30fe6a5be add files
$ cat normal3
normal3-modified
$ cat sub/normal4
normal4-modified
$ cat sub/large4
large4-modified
$ cat sub2/large6
large6-modified
$ cat sub2/large7
large7
$ cd ../e
$ hg pull ../b
pulling from ../b
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 2 changes to 2 files (+1 heads)
new changesets a381d2c8c80e (1 drafts)
(run 'hg heads' to see heads, 'hg merge' to merge)
$ hg rebase
rebasing 8:f574fb32bb45 "modify normal file largefile in repo d"
Invoking status precommit hook
M sub/normal4
M sub2/large6
saved backup bundle to $TESTTMP/e/.hg/strip-backup/f574fb32bb45-dd1d9f80-rebase.hg
$ hg log --template '{rev}:{node|short} {desc|firstline}\n'
9:598410d3eb9a modify normal file largefile in repo d
8:a381d2c8c80e modify normal file and largefile in repo b
7:daea875e9014 add/edit more largefiles
6:4355d653f84f edit files yet again
5:9d5af5072dbd edit files again
4:74c02385b94c move files
3:9e8fbc4bce62 copy files
2:51a0ae4d5864 remove files
1:ce8896473775 edit files
0:30d30fe6a5be add files
$ cat normal3
normal3-modified
$ cat sub/normal4
normal4-modified
$ cat sub/large4
large4-modified
$ cat sub2/large6
large6-modified
$ cat sub2/large7
large7
Log on largefiles
- same output
$ hg log --template '{rev}:{node|short} {desc|firstline}\n' .hglf/sub/large4
8:a381d2c8c80e modify normal file and largefile in repo b
6:4355d653f84f edit files yet again
5:9d5af5072dbd edit files again
4:74c02385b94c move files
$ hg log -G --template '{rev}:{node|short} {desc|firstline}\n' .hglf/sub/large4
o 8:a381d2c8c80e modify normal file and largefile in repo b
:
o 6:4355d653f84f edit files yet again
|
o 5:9d5af5072dbd edit files again
|
o 4:74c02385b94c move files
|
~
$ hg log --template '{rev}:{node|short} {desc|firstline}\n' sub/large4
8:a381d2c8c80e modify normal file and largefile in repo b
6:4355d653f84f edit files yet again
5:9d5af5072dbd edit files again
4:74c02385b94c move files
$ hg log -G --template '{rev}:{node|short} {desc|firstline}\n' .hglf/sub/large4
o 8:a381d2c8c80e modify normal file and largefile in repo b
:
o 6:4355d653f84f edit files yet again
|
o 5:9d5af5072dbd edit files again
|
o 4:74c02385b94c move files
|
~
- .hglf only matches largefiles, without .hglf it matches 9 bco sub/normal
$ hg log --template '{rev}:{node|short} {desc|firstline}\n' .hglf/sub
8:a381d2c8c80e modify normal file and largefile in repo b
6:4355d653f84f edit files yet again
5:9d5af5072dbd edit files again
4:74c02385b94c move files
1:ce8896473775 edit files
0:30d30fe6a5be add files
$ hg log -G --template '{rev}:{node|short} {desc|firstline}\n' .hglf/sub
o 8:a381d2c8c80e modify normal file and largefile in repo b
:
o 6:4355d653f84f edit files yet again
|
o 5:9d5af5072dbd edit files again
|
o 4:74c02385b94c move files
:
o 1:ce8896473775 edit files
|
o 0:30d30fe6a5be add files
$ hg log --template '{rev}:{node|short} {desc|firstline}\n' sub
9:598410d3eb9a modify normal file largefile in repo d
8:a381d2c8c80e modify normal file and largefile in repo b
6:4355d653f84f edit files yet again
5:9d5af5072dbd edit files again
4:74c02385b94c move files
1:ce8896473775 edit files
0:30d30fe6a5be add files
$ hg log -G --template '{rev}:{node|short} {desc|firstline}\n' sub
@ 9:598410d3eb9a modify normal file largefile in repo d
|
o 8:a381d2c8c80e modify normal file and largefile in repo b
:
o 6:4355d653f84f edit files yet again
|
o 5:9d5af5072dbd edit files again
|
o 4:74c02385b94c move files
:
o 1:ce8896473775 edit files
|
o 0:30d30fe6a5be add files
- globbing gives same result
$ hg log --template '{rev}:{node|short} {desc|firstline}\n' 'glob:sub/*'
9:598410d3eb9a modify normal file largefile in repo d
8:a381d2c8c80e modify normal file and largefile in repo b
6:4355d653f84f edit files yet again
5:9d5af5072dbd edit files again
4:74c02385b94c move files
1:ce8896473775 edit files
0:30d30fe6a5be add files
$ hg log -G --template '{rev}:{node|short} {desc|firstline}\n' 'glob:sub/*'
@ 9:598410d3eb9a modify normal file largefile in repo d
|
o 8:a381d2c8c80e modify normal file and largefile in repo b
:
o 6:4355d653f84f edit files yet again
|
o 5:9d5af5072dbd edit files again
|
o 4:74c02385b94c move files
:
o 1:ce8896473775 edit files
|
o 0:30d30fe6a5be add files
Rollback on largefiles.
$ echo large4-modified-again > sub/large4
$ hg commit -m "Modify large4 again"
Invoking status precommit hook
M sub/large4
$ hg rollback
repository tip rolled back to revision 9 (undo commit)
working directory now based on revision 9
$ hg st
M sub/large4
$ hg log --template '{rev}:{node|short} {desc|firstline}\n'
9:598410d3eb9a modify normal file largefile in repo d
8:a381d2c8c80e modify normal file and largefile in repo b
7:daea875e9014 add/edit more largefiles
6:4355d653f84f edit files yet again
5:9d5af5072dbd edit files again
4:74c02385b94c move files
3:9e8fbc4bce62 copy files
2:51a0ae4d5864 remove files
1:ce8896473775 edit files
0:30d30fe6a5be add files
$ cat sub/large4
large4-modified-again
"update --check" refuses to update with uncommitted changes.
$ hg update --check 8
abort: uncommitted changes
[255]
"update --clean" leaves correct largefiles in working copy, even when there is
.orig files from revert in .hglf.
$ echo mistake > sub2/large7
$ hg revert sub2/large7
$ cat sub2/large7
large7
$ cat sub2/large7.orig
mistake
$ test ! -f .hglf/sub2/large7.orig
$ hg -q update --clean -r null
$ hg update --clean
getting changed largefiles
3 largefiles updated, 0 removed
5 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cat normal3
normal3-modified
$ cat sub/normal4
normal4-modified
$ cat sub/large4
large4-modified
$ cat sub2/large6
large6-modified
$ cat sub2/large7
large7
$ cat sub2/large7.orig
mistake
$ test ! -f .hglf/sub2/large7.orig
verify that largefile .orig file no longer is overwritten on every update -C:
$ hg update --clean
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cat sub2/large7.orig
mistake
$ rm sub2/large7.orig
Now "update check" is happy.
$ hg update --check 8
getting changed largefiles
1 largefiles updated, 0 removed
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg update --check
getting changed largefiles
1 largefiles updated, 0 removed
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
Test removing empty largefiles directories on update
$ test -d sub2 && echo "sub2 exists"
sub2 exists
$ hg update -q null
$ test -d sub2 && echo "error: sub2 should not exist anymore"
[1]
$ hg update -q
Test hg remove removes empty largefiles directories
$ test -d sub2 && echo "sub2 exists"
sub2 exists
$ hg remove sub2/*
$ test -d sub2 && echo "error: sub2 should not exist anymore"
[1]
$ hg revert sub2/large6 sub2/large7
"revert" works on largefiles (and normal files too).
$ echo hack3 >> normal3
$ echo hack4 >> sub/normal4
$ echo hack4 >> sub/large4
$ rm sub2/large6
$ hg revert sub2/large6
$ hg rm sub2/large6
$ echo new >> sub2/large8
$ hg add --large sub2/large8
# XXX we don't really want to report that we're reverting the standin;
# that's just an implementation detail. But I don't see an obvious fix. ;-(
$ hg revert sub
reverting .hglf/sub/large4
reverting sub/normal4
$ hg status
M normal3
A sub2/large8
R sub2/large6
? sub/large4.orig
? sub/normal4.orig
$ cat sub/normal4
normal4-modified
$ cat sub/large4
large4-modified
$ hg revert -a --no-backup
forgetting .hglf/sub2/large8
reverting normal3
undeleting .hglf/sub2/large6
$ hg status
? sub/large4.orig
? sub/normal4.orig
? sub2/large8
$ cat normal3
normal3-modified
$ cat sub2/large6
large6-modified
$ rm sub/*.orig sub2/large8
revert some files to an older revision
$ hg revert --no-backup -r 8 sub2
reverting .hglf/sub2/large6
$ cat sub2/large6
large6
$ hg revert --no-backup -C -r '.^' sub2
$ hg revert --no-backup sub2
reverting .hglf/sub2/large6
$ hg status
"verify --large" actually verifies largefiles
- Where Do We Come From? What Are We? Where Are We Going?
$ pwd
$TESTTMP/e
$ hg paths
default = $TESTTMP/d
$ hg verify --large
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
checking dirstate
checked 10 changesets with 28 changes to 10 files
searching 1 changesets for largefiles
verified existence of 3 revisions of 3 largefiles
- introduce missing blob in local store repo and remote store
and make sure that this is caught:
$ mv $TESTTMP/d/.hg/largefiles/e166e74c7303192238d60af5a9c4ce9bef0b7928 .
$ rm .hg/largefiles/e166e74c7303192238d60af5a9c4ce9bef0b7928
$ hg verify --large -q
changeset 9:598410d3eb9a: sub/large4 references missing $TESTTMP/d/.hg/largefiles/e166e74c7303192238d60af5a9c4ce9bef0b7928
[1]
- introduce corruption and make sure that it is caught when checking content:
$ echo '5 cents' > $TESTTMP/d/.hg/largefiles/e166e74c7303192238d60af5a9c4ce9bef0b7928
$ hg verify -q --large --lfc
changeset 9:598410d3eb9a: sub/large4 references corrupted $TESTTMP/d/.hg/largefiles/e166e74c7303192238d60af5a9c4ce9bef0b7928
[1]
- cleanup
$ cp e166e74c7303192238d60af5a9c4ce9bef0b7928 $TESTTMP/d/.hg/largefiles/
$ mv e166e74c7303192238d60af5a9c4ce9bef0b7928 .hg/largefiles/
- verifying all revisions will fail because we didn't clone all largefiles to d:
$ echo 'T-shirt' > $TESTTMP/d/.hg/largefiles/eb7338044dc27f9bc59b8dd5a246b065ead7a9c4
$ hg verify -q --lfa --lfc
changeset 0:30d30fe6a5be: large1 references missing $TESTTMP/d/.hg/largefiles/4669e532d5b2c093a78eca010077e708a071bb64
changeset 0:30d30fe6a5be: sub/large2 references missing $TESTTMP/d/.hg/largefiles/1deebade43c8c498a3c8daddac0244dc55d1331d
changeset 1:ce8896473775: large1 references missing $TESTTMP/d/.hg/largefiles/5f78770c0e77ba4287ad6ef3071c9bf9c379742f
changeset 1:ce8896473775: sub/large2 references corrupted $TESTTMP/d/.hg/largefiles/eb7338044dc27f9bc59b8dd5a246b065ead7a9c4
changeset 3:9e8fbc4bce62: large1 references corrupted $TESTTMP/d/.hg/largefiles/eb7338044dc27f9bc59b8dd5a246b065ead7a9c4
changeset 4:74c02385b94c: large3 references corrupted $TESTTMP/d/.hg/largefiles/eb7338044dc27f9bc59b8dd5a246b065ead7a9c4
changeset 4:74c02385b94c: sub/large4 references corrupted $TESTTMP/d/.hg/largefiles/eb7338044dc27f9bc59b8dd5a246b065ead7a9c4
changeset 5:9d5af5072dbd: large3 references missing $TESTTMP/d/.hg/largefiles/baaf12afde9d8d67f25dab6dced0d2bf77dba47c
changeset 5:9d5af5072dbd: sub/large4 references missing $TESTTMP/d/.hg/largefiles/aeb2210d19f02886dde00dac279729a48471e2f9
changeset 6:4355d653f84f: large3 references missing $TESTTMP/d/.hg/largefiles/7838695e10da2bb75ac1156565f40a2595fa2fa0
[1]
- cleanup
$ rm $TESTTMP/d/.hg/largefiles/eb7338044dc27f9bc59b8dd5a246b065ead7a9c4
$ rm -f .hglf/sub/*.orig
Update to revision with missing largefile - and make sure it really is missing
$ rm ${USERCACHE}/7838695e10da2bb75ac1156565f40a2595fa2fa0
$ hg up -r 6
getting changed largefiles
large3: largefile 7838695e10da2bb75ac1156565f40a2595fa2fa0 not available from file:/*/$TESTTMP/d (glob)
1 largefiles updated, 2 removed
4 files updated, 0 files merged, 2 files removed, 0 files unresolved
$ rm normal3
$ echo >> sub/normal4
$ hg ci -m 'commit with missing files'
Invoking status precommit hook
M sub/normal4
! large3
! normal3
created new head
$ hg st
! large3
! normal3
$ hg up -r.
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg st
! large3
! normal3
$ hg up -Cr.
getting changed largefiles
large3: largefile 7838695e10da2bb75ac1156565f40a2595fa2fa0 not available from file:/*/$TESTTMP/d (glob)
0 largefiles updated, 0 removed
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg st
! large3
$ hg rollback
repository tip rolled back to revision 9 (undo commit)
working directory now based on revision 6
Merge with revision with missing largefile - and make sure it tries to fetch it.
$ hg up -Cqr null
$ echo f > f
$ hg ci -Am branch
adding f
Invoking status precommit hook
A f
created new head
$ hg merge -r 6
getting changed largefiles
large3: largefile 7838695e10da2bb75ac1156565f40a2595fa2fa0 not available from file:/*/$TESTTMP/d (glob)
1 largefiles updated, 0 removed
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg rollback -q
$ hg up -Cq
Pulling 0 revisions with --all-largefiles should not fetch for all revisions
$ hg pull --all-largefiles
pulling from $TESTTMP/d
searching for changes
no changes found
Merging does not revert to old versions of largefiles and also check
that merging after having pulled from a non-default remote works
correctly.
$ cd ..
$ hg clone -r 7 e temp
adding changesets
adding manifests
adding file changes
added 8 changesets with 24 changes to 10 files
new changesets 30d30fe6a5be:daea875e9014 (8 drafts)
updating to branch default
getting changed largefiles
3 largefiles updated, 0 removed
5 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg clone temp f
updating to branch default
getting changed largefiles
3 largefiles updated, 0 removed
5 files updated, 0 files merged, 0 files removed, 0 files unresolved
# Delete the largefiles in the largefiles system cache so that we have an
# opportunity to test that caching after a pull works.
$ rm "${USERCACHE}"/*
$ cd f
$ echo "large4-merge-test" > sub/large4
$ hg commit -m "Modify large4 to test merge"
Invoking status precommit hook
M sub/large4
# Test --cache-largefiles flag
$ hg pull --lfrev 'heads(pulled())' ../e
pulling from ../e
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 4 changes to 4 files (+1 heads)
new changesets a381d2c8c80e:598410d3eb9a (2 drafts)
(run 'hg heads' to see heads, 'hg merge' to merge)
2 largefiles cached
$ hg merge
largefile sub/large4 has a merge conflict
ancestor was 971fb41e78fea4f8e0ba5244784239371cb00591
you can keep (l)ocal d846f26643bfa8ec210be40cc93cc6b7ff1128ea or take (o)ther e166e74c7303192238d60af5a9c4ce9bef0b7928.
what do you want to do? l
getting changed largefiles
1 largefiles updated, 0 removed
3 files updated, 1 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg commit -m "Merge repos e and f"
Invoking status precommit hook
M normal3
M sub/normal4
M sub2/large6
$ cat normal3
normal3-modified
$ cat sub/normal4
normal4-modified
$ cat sub/large4
large4-merge-test
$ cat sub2/large6
large6-modified
$ cat sub2/large7
large7
Test status after merging with a branch that introduces a new largefile:
$ echo large > large
$ hg add --large large
$ hg commit -m 'add largefile'
Invoking status precommit hook
A large
$ hg update -q ".^"
$ echo change >> normal3
$ hg commit -m 'some change'
Invoking status precommit hook
M normal3
created new head
$ hg merge
getting changed largefiles
1 largefiles updated, 0 removed
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg status
M large
- make sure update of merge with removed largefiles fails as expected
$ hg rm sub2/large6
$ hg up -r.
abort: outstanding uncommitted merge
[20]
- revert should be able to revert files introduced in a pending merge
$ hg revert --all -r .
removing .hglf/large
undeleting .hglf/sub2/large6
Test that a normal file and a largefile with the same name and path cannot
coexist.
$ rm sub2/large7
$ echo "largeasnormal" > sub2/large7
$ hg add sub2/large7
sub2/large7 already a largefile
Test that transplanting a largefile change works correctly.
$ cd ..
$ hg clone -r 8 d g
adding changesets
adding manifests
adding file changes
added 9 changesets with 26 changes to 10 files
new changesets 30d30fe6a5be:a381d2c8c80e (9 drafts)
updating to branch default
getting changed largefiles
3 largefiles updated, 0 removed
5 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd g
$ hg transplant -s ../d 598410d3eb9a
searching for changes
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 2 changes to 2 files
new changesets 598410d3eb9a (1 drafts)
$ hg log --template '{rev}:{node|short} {desc|firstline}\n'
9:598410d3eb9a modify normal file largefile in repo d
8:a381d2c8c80e modify normal file and largefile in repo b
7:daea875e9014 add/edit more largefiles
6:4355d653f84f edit files yet again
5:9d5af5072dbd edit files again
4:74c02385b94c move files
3:9e8fbc4bce62 copy files
2:51a0ae4d5864 remove files
1:ce8896473775 edit files
0:30d30fe6a5be add files
$ cat normal3
normal3-modified
$ cat sub/normal4
normal4-modified
$ cat sub/large4
large4-modified
$ cat sub2/large6
large6-modified
$ cat sub2/large7
large7
Cat a largefile
$ hg cat normal3
normal3-modified
$ hg cat sub/large4
large4-modified
$ rm "${USERCACHE}"/*
$ hg cat -r a381d2c8c80e -o cat.out sub/large4
$ cat cat.out
large4-modified
$ rm cat.out
$ hg cat -r a381d2c8c80e normal3
normal3-modified
$ hg cat -r '.^' normal3
normal3-modified
$ hg cat -r '.^' sub/large4 doesntexist
large4-modified
doesntexist: no such file in rev a381d2c8c80e
$ hg --cwd sub cat -r '.^' large4
large4-modified
$ hg --cwd sub cat -r '.^' ../normal3
normal3-modified
Cat a standin
$ hg cat .hglf/sub/large4
e166e74c7303192238d60af5a9c4ce9bef0b7928
$ hg cat .hglf/normal3
.hglf/normal3: no such file in rev 598410d3eb9a
[1]
Test that renaming a largefile results in correct output for status
$ hg rename sub/large4 large4-renamed
$ hg commit -m "test rename output"
Invoking status precommit hook
A large4-renamed
R sub/large4
$ cat large4-renamed
large4-modified
$ cd sub2
$ hg rename large6 large6-renamed
$ hg st
A sub2/large6-renamed
R sub2/large6
$ cd ..
Test --normal flag
$ dd if=/dev/zero bs=2k count=11k > new-largefile 2> /dev/null
$ hg add --normal --large new-largefile
abort: --normal cannot be used with --large
[255]
$ hg add --normal new-largefile
new-largefile: up to 69 MB of RAM may be required to manage this file
(use 'hg revert new-largefile' to cancel the pending addition)
$ hg revert new-largefile
$ hg --config ui.large-file-limit=22M add --normal new-largefile
Test explicit commit of switch between normal and largefile - make sure both
the add and the remove is committed.
$ hg up -qC
$ hg forget normal3 large4-renamed
$ hg add --large normal3
$ hg add large4-renamed
$ hg commit -m 'swap' normal3 large4-renamed
Invoking status precommit hook
A large4-renamed
A normal3
? new-largefile
? sub2/large6-renamed
$ hg mani
.hglf/normal3
.hglf/sub2/large6
.hglf/sub2/large7
large4-renamed
sub/normal4
$ cd ..