view tests/test-mq-qpush-fail.t @ 41277:61f9ef23a12f

dagop: minor python optimization to `headrevs`

Less lookup and less function call never hurt. This provides a small speedup
on various run of the 'heads()' revset. This also buys back some of the slow
down we observed in the previous changesets for single value lookup.

Performance number:
0) before dagop.headrevs usage
1) after dagop.headrevs usage
2) after this change

revset: heads(all())
   plain         min           max           first         last          reverse       rev..rst      rev..ast      sort          sor..rst      sor..ast
0) 0.036503      0.032564      0.030024      0.032378      0.030887      0.036367      0.031713      0.032205      0.036467      0.032286      0.030300
1) 0.036668      0.035347 108% 0.035611 118% 0.035358 109% 0.035726 115% 0.036411      0.035261 111% 0.036096 112% 0.036052      0.035095 108% 0.035792 118%
2) 0.034254  93% 0.034482      0.035003      0.034353      0.033754  94% 0.034689      0.034361      0.035059      0.034636      0.034662      0.035465

revset: heads(-10000:-1)
   plain         min           max           first         last          reverse       rev..rst      rev..ast      sort          sor..rst      sor..ast
0) 0.003936      0.003218      0.003227      0.003302      0.003328      0.003848      0.003305      0.003252      0.003839      0.003306      0.003279
1) 0.003870      0.003785 117% 0.003821 118% 0.003780 114% 0.003769 113% 0.003776      0.003792 114% 0.003805 117% 0.003810      0.003798 114% 0.003840 117%
2) 0.003666  94% 0.003577  94% 0.003632      0.003644      0.003614      0.003638      0.003652      0.003632      0.003661      0.003660      0.003658

revset: (-5000:-1000) and heads(-10000:-1)
   plain         min           max           first         last          reverse       rev..rst      rev..ast      sort          sor..rst      sor..ast
0) 0.004244      0.003368      0.003313      0.003367      0.003327      0.004325      0.003401      0.003379      0.004310      0.003359      0.003396
1) 0.003969  93% 0.003862 114% 0.003834 115% 0.003810 113% 0.003822 114% 0.003940  91% 0.003908 114% 0.003814 112% 0.003986  92% 0.003954 117% 0.003816 112%
2) 0.003728  93% 0.003638  94% 0.003659      0.003685      0.003628  94% 0.003716  94% 0.003653  93% 0.003655      0.003748  94% 0.003740  94% 0.003686

revset: heads(matching(tip, "author"))
   plain         min           max           first         last          reverse       rev..rst      rev..ast      sort          sor..rst      sor..ast
0) 7.574666      7.545950      7.570743      7.578697      7.525725      7.509929      7.443854      7.488442      7.452880      7.445411      7.689107
1) 7.549390      7.389162      7.529790      7.536297      7.450467      7.555347      7.404586      7.514948      7.542794      7.524787      7.536918
2) 7.568294      7.479326      7.578624      7.380375      7.440102      7.454218      7.515189      7.556511      7.524585      7.537566      7.507418

revset: heads(matching(tip, "author")) and -10000:-1
   plain         min           max           first         last          reverse       rev..rst      rev..ast      sort          sor..rst      sor..ast
0) 7.512533      7.605877      7.382894      7.462109      7.420086      7.575034      7.448452      7.549374      7.457880      7.450308      7.515019
1) 7.548677      7.551832      7.629598      7.494857      7.550554      7.521838      7.451794      error         7.321781      7.546885      7.557523
2) 7.451985      7.541044      7.506563      7.470928      7.512618      7.474988      7.498887      7.547930      7.560276      7.618599      7.465442

revset: (-10000:-1) and heads(matching(tip, "author"))
   plain         min           max           first         last          reverse       rev..rst      rev..ast      sort          sor..rst      sor..ast
0) 7.465419      7.570089      7.439594      7.521221      7.498716      7.492922      7.479108      7.552397      7.407888      error         7.468264
1) 7.539866      7.548045      7.491761      7.517170      7.469824      7.501990      7.579102      7.502568      7.578102      7.555754      7.567622
2) 7.370463      7.514712      7.497024      7.679428      7.638138      7.490775      7.472273      7.652587      7.584139      7.511893      7.466384

Test that qpush cleans things up if it doesn't complete

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mq=" >> $HGRCPATH
  $ hg init repo
  $ cd repo
  $ echo foo > foo
  $ hg ci -Am 'add foo'
  adding foo
  $ touch untracked-file
  $ echo 'syntax: glob' > .hgignore
  $ echo '.hgignore' >> .hgignore
  $ hg qinit

test qpush on empty series

  $ hg qpush
  no patches in series
  $ hg qnew patch1
  $ echo >> foo
  $ hg qrefresh -m 'patch 1'
  $ hg qnew patch2
  $ echo bar > bar
  $ hg add bar
  $ hg qrefresh -m 'patch 2'
  $ hg qnew --config 'mq.plain=true' -U bad-patch
  $ echo >> foo
  $ hg qrefresh
  $ hg qpop -a
  popping bad-patch
  popping patch2
  popping patch1
  patch queue now empty
  $ "$PYTHON" -c 'import sys; getattr(sys.stdout, "buffer", sys.stdout).write(b"\xe9\n")' > message
  $ cat .hg/patches/bad-patch >> message
  $ mv message .hg/patches/bad-patch
  $ cat > $TESTTMP/wrapplayback.py <<EOF
  > import os
  > from mercurial import extensions, transaction
  > def wrapplayback(orig,
  >                  journal, report, opener, vfsmap, entries, backupentries,
  >                  unlink=True, checkambigfiles=None):
  >     orig(journal, report, opener, vfsmap, entries, backupentries, unlink,
  >          checkambigfiles)
  >     # Touching files truncated at "transaction.abort" causes
  >     # forcible re-loading invalidated filecache properties
  >     # (including repo.changelog)
  >     for f, o, _ignore in entries:
  >         if o or not unlink:
  >             os.utime(opener.join(f), (0.0, 0.0))
  > def extsetup(ui):
  >     extensions.wrapfunction(transaction, '_playback', wrapplayback)
  > EOF
  $ hg qpush -a --config extensions.wrapplayback=$TESTTMP/wrapplayback.py  && echo 'qpush succeeded?!'
  applying patch1
  applying patch2
  applying bad-patch
  transaction abort!
  rollback completed
  cleaning up working directory...
  reverting foo
  done
  abort: decoding near '\xe9': 'ascii' codec can't decode byte 0xe9 in position 0: ordinal not in range(128)! (esc)
  [255]
  $ hg parents
  changeset:   0:bbd179dfa0a7
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     add foo
  

test corrupt status file
  $ hg qpush
  applying patch1
  now at: patch1
  $ cp .hg/patches/status .hg/patches/status.orig
  $ hg qpop
  popping patch1
  patch queue now empty
  $ cp .hg/patches/status.orig .hg/patches/status
  $ hg qpush
  abort: working directory revision is not qtip
  [255]
  $ rm .hg/patches/status .hg/patches/status.orig


bar should be gone; other unknown/ignored files should still be around

  $ hg status -A
  ? untracked-file
  I .hgignore
  C foo

preparing qpush of a missing patch

  $ hg qpop -a
  no patches applied
  $ hg qpush
  applying patch1
  now at: patch1
  $ rm .hg/patches/patch2

now we expect the push to fail, but it should NOT complain about patch1

  $ hg qpush
  applying patch2
  unable to read patch2
  now at: patch1
  [1]

preparing qpush of missing patch with no patch applied

  $ hg qpop -a
  popping patch1
  patch queue now empty
  $ rm .hg/patches/patch1

qpush should fail the same way as below

  $ hg qpush
  applying patch1
  unable to read patch1
  [1]

Test qpush to a patch below the currently applied patch.

  $ hg qq -c guardedseriesorder
  $ hg qnew a
  $ hg qguard +block
  $ hg qnew b
  $ hg qnew c

  $ hg qpop -a
  popping c
  popping b
  popping a
  patch queue now empty

try to push and pop while a is guarded

  $ hg qpush a
  cannot push 'a' - guarded by '+block'
  [1]
  $ hg qpush -a
  applying b
  patch b is empty
  applying c
  patch c is empty
  now at: c

now try it when a is unguarded, and we're at the top of the queue

  $ hg qapplied -v
  0 G a
  1 A b
  2 A c
  $ hg qsel block
  $ hg qpush b
  abort: cannot push to a previous patch: b
  [255]
  $ hg qpush a
  abort: cannot push to a previous patch: a
  [255]

and now we try it one more time with a unguarded, while we're not at the top of the queue

  $ hg qpop b
  popping c
  now at: b
  $ hg qpush a
  abort: cannot push to a previous patch: a
  [255]

test qpop --force and backup files

  $ hg qpop -a
  popping b
  patch queue now empty
  $ hg qq --create force
  $ echo a > a
  $ echo b > b
  $ echo c > c
  $ hg ci -Am add a b c
  $ echo a >> a
  $ hg rm b
  $ hg rm c
  $ hg qnew p1
  $ echo a >> a
  $ echo bb > b
  $ hg add b
  $ echo cc > c
  $ hg add c
  $ hg qpop --force --verbose
  saving current version of a as a.orig
  saving current version of b as b.orig
  saving current version of c as c.orig
  popping p1
  patch queue now empty
  $ hg st
  ? a.orig
  ? b.orig
  ? c.orig
  ? untracked-file
  $ cat a.orig
  a
  a
  a
  $ cat b.orig
  bb
  $ cat c.orig
  cc

test qpop --force --no-backup

  $ hg qpush
  applying p1
  now at: p1
  $ rm a.orig
  $ echo a >> a
  $ hg qpop --force --no-backup --verbose
  popping p1
  patch queue now empty
  $ test -f a.orig && echo 'error: backup with --no-backup'
  [1]

test qpop --keep-changes

  $ hg qpush
  applying p1
  now at: p1
  $ hg qpop --keep-changes --force
  abort: cannot use both --force and --keep-changes
  [255]
  $ echo a >> a
  $ hg qpop --keep-changes
  abort: local changes found, qrefresh first
  [255]
  $ hg revert -qa a
  $ rm a
  $ hg qpop --keep-changes
  abort: local changes found, qrefresh first
  [255]
  $ hg rm -A a
  $ hg qpop --keep-changes
  abort: local changes found, qrefresh first
  [255]
  $ hg revert -qa a
  $ echo b > b
  $ hg add b
  $ hg qpop --keep-changes
  abort: local changes found, qrefresh first
  [255]
  $ hg forget b
  $ echo d > d
  $ hg add d
  $ hg qpop --keep-changes
  popping p1
  patch queue now empty
  $ hg forget d
  $ rm d

test qpush --force and backup files

  $ echo a >> a
  $ hg qnew p2
  $ echo b >> b
  $ echo d > d
  $ echo e > e
  $ hg add d e
  $ hg rm c
  $ hg qnew p3
  $ hg qpop -a
  popping p3
  popping p2
  patch queue now empty
  $ echo a >> a
  $ echo b1 >> b
  $ echo d1 > d
  $ hg add d
  $ echo e1 > e
  $ hg qpush -a --force --verbose
  applying p2
  saving current version of a as a.orig
  patching file a
  committing files:
  a
  committing manifest
  committing changelog
  applying p3
  saving current version of b as b.orig
  saving current version of d as d.orig
  patching file b
  patching file c
  patching file d
  file d already exists
  1 out of 1 hunks FAILED -- saving rejects to file d.rej
  patching file e
  file e already exists
  1 out of 1 hunks FAILED -- saving rejects to file e.rej
  patch failed to apply
  committing files:
  b
  committing manifest
  committing changelog
  patch failed, rejects left in working directory
  errors during apply, please fix and qrefresh p3
  [2]
  $ cat a.orig
  a
  a
  $ cat b.orig
  b
  b1
  $ cat d.orig
  d1

test qpush --force --no-backup

  $ hg revert -qa
  $ hg qpop -a
  popping p3
  popping p2
  patch queue now empty
  $ echo a >> a
  $ rm a.orig
  $ hg qpush --force --no-backup --verbose
  applying p2
  patching file a
  committing files:
  a
  committing manifest
  committing changelog
  now at: p2
  $ test -f a.orig && echo 'error: backup with --no-backup'
  [1]

test qgoto --force --no-backup

  $ hg qpop
  popping p2
  patch queue now empty
  $ echo a >> a
  $ hg qgoto --force --no-backup p2 --verbose
  applying p2
  patching file a
  committing files:
  a
  committing manifest
  committing changelog
  now at: p2
  $ test -f a.orig && echo 'error: backup with --no-backup'
  [1]

test qpush --keep-changes

  $ hg qpush --keep-changes --force
  abort: cannot use both --force and --keep-changes
  [255]
  $ hg qpush --keep-changes --exact
  abort: cannot use --exact and --keep-changes together
  [255]
  $ echo b >> b
  $ hg qpush --keep-changes
  applying p3
  abort: conflicting local changes found
  (did you forget to qrefresh?)
  [255]
  $ rm b
  $ hg qpush --keep-changes
  applying p3
  abort: conflicting local changes found
  (did you forget to qrefresh?)
  [255]
  $ hg rm -A b
  $ hg qpush --keep-changes
  applying p3
  abort: conflicting local changes found
  (did you forget to qrefresh?)
  [255]
  $ hg revert -aq b
  $ echo d > d
  $ hg add d
  $ hg qpush --keep-changes
  applying p3
  abort: conflicting local changes found
  (did you forget to qrefresh?)
  [255]
  $ hg forget d
  $ rm d
  $ hg qpop
  popping p2
  patch queue now empty
  $ echo b >> b
  $ hg qpush -a --keep-changes
  applying p2
  applying p3
  abort: conflicting local changes found
  (did you forget to qrefresh?)
  [255]
  $ hg qtop
  p2
  $ hg parents --template "{rev} {desc}\n"
  2 imported patch p2
  $ hg st b
  M b
  $ cat b
  b
  b

test qgoto --keep-changes

  $ hg revert -aq b
  $ rm e
  $ hg qgoto --keep-changes --force p3
  abort: cannot use both --force and --keep-changes
  [255]
  $ echo a >> a
  $ hg qgoto --keep-changes p3
  applying p3
  now at: p3
  $ hg st a
  M a
  $ hg qgoto --keep-changes p2
  popping p3
  now at: p2
  $ hg st a
  M a

test mq.keepchanges setting

  $ hg --config mq.keepchanges=1 qpush
  applying p3
  now at: p3
  $ hg st a
  M a
  $ hg --config mq.keepchanges=1 qpop
  popping p3
  now at: p2
  $ hg st a
  M a
  $ hg --config mq.keepchanges=1 qgoto p3
  applying p3
  now at: p3
  $ hg st a
  M a
  $ echo b >> b
  $ hg --config mq.keepchanges=1 qpop --force --config 'ui.origbackuppath=.hg/origbackups'
  popping p3
  now at: p2
  $ hg st b
  $ hg --config mq.keepchanges=1 qpush --exact
  abort: local changes found, qrefresh first
  [255]
  $ hg revert -qa a
  $ hg qpop
  popping p2
  patch queue now empty
  $ echo a >> a
  $ hg --config mq.keepchanges=1 qpush --force
  applying p2
  now at: p2
  $ hg st a

test previous qpop (with --force and --config) saved .orig files to where user
wants them
  $ ls .hg/origbackups
  b
  $ rm -rf .hg/origbackups

  $ cd ..