view hgext/censor.py @ 29322:66dbdd3cc2b9 stable

bdiff: extend matches across popular lines

For very large diffs that have large numbers of identical lines (JSON
dumps) that also have large blocks of identical text, bdiff could become
confused about which block matches which because it can only match
very limited regions. The result is very large diffs for small sets of edits.

The earlier recursion rebalancing fix made this behavior more frequent because
it's now more prone to match block 1 to block 2. One frequent user of
large JSON files reported being unable to pass the resulting diffs
through their code review system.

Prior to this change, bdiff would calculate the length of a match at
(i, j) as 1 + length found at (i-1, j-1). With large number of popular
(ignored) lines, this often meant matches couldn't be extended
backwards at all and thus all matching regions were very small.
Disabling the popularity threshold is not an option because it brings
back quadratic behavior.

Instead, we extend a match backwards until we either found a previously
discovered match or we find a mismatching line. This thus successfully
bridges over any popular lines inside and before a matching region.
The larger regions then significant reduce the probability of confusion.

# Copyright (C) 2015 - Mike Edgar <[e-mail]>
#
# This extension enables removal of file content at a given revision,
# rewriting the data/metadata of successive revisions to preserve revision log
# integrity.

"""erase file content at a given revision

The censor command instructs Mercurial to erase all content of a file at a given
revision *without updating the changeset hash.* This allows existing history to
remain valid while preventing future clones/pulls from receiving the erased
data.

Typical uses for censor are due to security or legal requirements, including::

 * Passwords, private keys, cryptographic material
 * Licensed data/code/libraries for which the license has expired
 * Personally Identifiable Information or other private data

Censored nodes can interrupt mercurial's typical operation whenever the excised
data needs to be materialized. Some commands, like ``hg cat``/``hg revert``,
simply fail when asked to produce censored data. Others, like ``hg verify`` and
``hg update``, must be capable of tolerating censored data to continue to
function in a meaningful way. Such commands only tolerate censored file
revisions if they are allowed by the "censor.policy=ignore" config option.
"""

from __future__ import absolute_import

from mercurial.i18n import _
from mercurial.node import short

from mercurial import (
    cmdutil,
    error,
    filelog,
    lock as lockmod,
    revlog,
    scmutil,
    util,
)

cmdtable = {}
command = cmdutil.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'internal' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'internal'

@command('censor',
    [('r', 'rev', '', _('censor file from specified revision'), _('REV')),
     ('t', 'tombstone', '', _('replacement tombstone data'), _('TEXT'))],
    _('-r REV [-t TEXT] [FILE]'))
def censor(ui, repo, path, rev='', tombstone='', **opts):
    wlock = lock = None
    try:
        wlock = repo.wlock()
        lock = repo.lock()
        return _docensor(ui, repo, path, rev, tombstone, **opts)
    finally:
        lockmod.release(lock, wlock)

def _docensor(ui, repo, path, rev='', tombstone='', **opts):
    if not path:
        raise error.Abort(_('must specify file path to censor'))
    if not rev:
        raise error.Abort(_('must specify revision to censor'))

    wctx = repo[None]

    m = scmutil.match(wctx, (path,))
    if m.anypats() or len(m.files()) != 1:
        raise error.Abort(_('can only specify an explicit filename'))
    path = m.files()[0]
    flog = repo.file(path)
    if not len(flog):
        raise error.Abort(_('cannot censor file with no history'))

    rev = scmutil.revsingle(repo, rev, rev).rev()
    try:
        ctx = repo[rev]
    except KeyError:
        raise error.Abort(_('invalid revision identifier %s') % rev)

    try:
        fctx = ctx.filectx(path)
    except error.LookupError:
        raise error.Abort(_('file does not exist at revision %s') % rev)

    fnode = fctx.filenode()
    headctxs = [repo[c] for c in repo.heads()]
    heads = [c for c in headctxs if path in c and c.filenode(path) == fnode]
    if heads:
        headlist = ', '.join([short(c.node()) for c in heads])
        raise error.Abort(_('cannot censor file in heads (%s)') % headlist,
            hint=_('clean/delete and commit first'))

    wp = wctx.parents()
    if ctx.node() in [p.node() for p in wp]:
        raise error.Abort(_('cannot censor working directory'),
            hint=_('clean/delete/update first'))

    flogv = flog.version & 0xFFFF
    if flogv != revlog.REVLOGNG:
        raise error.Abort(
            _('censor does not support revlog version %d') % (flogv,))

    tombstone = filelog.packmeta({"censored": tombstone}, "")

    crev = fctx.filerev()

    if len(tombstone) > flog.rawsize(crev):
        raise error.Abort(_(
            'censor tombstone must be no longer than censored data'))

    # Using two files instead of one makes it easy to rewrite entry-by-entry
    idxread = repo.svfs(flog.indexfile, 'r')
    idxwrite = repo.svfs(flog.indexfile, 'wb', atomictemp=True)
    if flog.version & revlog.REVLOGNGINLINEDATA:
        dataread, datawrite = idxread, idxwrite
    else:
        dataread = repo.svfs(flog.datafile, 'r')
        datawrite = repo.svfs(flog.datafile, 'wb', atomictemp=True)

    # Copy all revlog data up to the entry to be censored.
    rio = revlog.revlogio()
    offset = flog.start(crev)

    for chunk in util.filechunkiter(idxread, limit=crev * rio.size):
        idxwrite.write(chunk)
    for chunk in util.filechunkiter(dataread, limit=offset):
        datawrite.write(chunk)

    def rewriteindex(r, newoffs, newdata=None):
        """Rewrite the index entry with a new data offset and optional new data.

        The newdata argument, if given, is a tuple of three positive integers:
        (new compressed, new uncompressed, added flag bits).
        """
        offlags, comp, uncomp, base, link, p1, p2, nodeid = flog.index[r]
        flags = revlog.gettype(offlags)
        if newdata:
            comp, uncomp, nflags = newdata
            flags |= nflags
        offlags = revlog.offset_type(newoffs, flags)
        e = (offlags, comp, uncomp, r, link, p1, p2, nodeid)
        idxwrite.write(rio.packentry(e, None, flog.version, r))
        idxread.seek(rio.size, 1)

    def rewrite(r, offs, data, nflags=revlog.REVIDX_DEFAULT_FLAGS):
        """Write the given full text to the filelog with the given data offset.

        Returns:
            The integer number of data bytes written, for tracking data offsets.
        """
        flag, compdata = flog.compress(data)
        newcomp = len(flag) + len(compdata)
        rewriteindex(r, offs, (newcomp, len(data), nflags))
        datawrite.write(flag)
        datawrite.write(compdata)
        dataread.seek(flog.length(r), 1)
        return newcomp

    # Rewrite censored revlog entry with (padded) tombstone data.
    pad = ' ' * (flog.rawsize(crev) - len(tombstone))
    offset += rewrite(crev, offset, tombstone + pad, revlog.REVIDX_ISCENSORED)

    # Rewrite all following filelog revisions fixing up offsets and deltas.
    for srev in xrange(crev + 1, len(flog)):
        if crev in flog.parentrevs(srev):
            # Immediate children of censored node must be re-added as fulltext.
            try:
                revdata = flog.revision(srev)
            except error.CensoredNodeError as e:
                revdata = e.tombstone
            dlen = rewrite(srev, offset, revdata)
        else:
            # Copy any other revision data verbatim after fixing up the offset.
            rewriteindex(srev, offset)
            dlen = flog.length(srev)
            for chunk in util.filechunkiter(dataread, limit=dlen):
                datawrite.write(chunk)
        offset += dlen

    idxread.close()
    idxwrite.close()
    if dataread is not idxread:
        dataread.close()
        datawrite.close()