view contrib/perf.py @ 23787:678f53865c68

revset: use localrepo revbranchcache for branch name filtering

Branch name filtering in revsets was expensive. For every rev it created a
changectx and called .branch() which retrieved the branch name from the
changelog.

Instead, use the revbranchcache.

The revbranchcache is used read-only. The revset implementation with generators
and callbacks makes it hard to figure out when we are done using/updating the
cache and could write it back. It would also be 'tricky' to lock the repo for
writing from within a revset execution. Finally, the branchmap update will
usually make sure that the cache is updated before any revset can be run.
The revbranchcache is used without any locking but is short-lived and used in a
tight loop where we can assume that the changelog doesn't change ... or where
it not is relevant to us if it does.

perfrevset 'branch(mobile)' on mozilla-central.
Before:
! wall 10.989637 comb 10.970000 user 10.940000 sys 0.030000 (best of 3)
After, no cache:
! wall 7.368656 comb 7.370000 user 7.360000 sys 0.010000 (best of 3)
After, with cache:
! wall 0.528098 comb 0.530000 user 0.530000 sys 0.000000 (best of 18)

The performance improvement even without cache come from being based on
branchinfo on the changelog instead of using ctx.branch().

Some tests are added to verify that the revbranchcache works and keep an eye on
when the cache files actually are updated.

# perf.py - performance test routines
'''helper extension to measure performance'''

from mercurial import cmdutil, scmutil, util, commands, obsolete
from mercurial import repoview, branchmap, merge, copies
import time, os, sys
import functools

cmdtable = {}
command = cmdutil.command(cmdtable)

def gettimer(ui, opts=None):
    """return a timer function and formatter: (timer, formatter)

    This functions exist to gather the creation of formatter in a single
    place instead of duplicating it in all performance command."""
    if opts is None:
        opts = {}
    # redirect all to stderr
    ui = ui.copy()
    ui.fout = ui.ferr
    # get a formatter
    fm = ui.formatter('perf', opts)
    return functools.partial(_timer, fm), fm

def _timer(fm, func, title=None):
    results = []
    begin = time.time()
    count = 0
    while True:
        ostart = os.times()
        cstart = time.time()
        r = func()
        cstop = time.time()
        ostop = os.times()
        count += 1
        a, b = ostart, ostop
        results.append((cstop - cstart, b[0] - a[0], b[1]-a[1]))
        if cstop - begin > 3 and count >= 100:
            break
        if cstop - begin > 10 and count >= 3:
            break

    fm.startitem()

    if title:
        fm.write('title', '! %s\n', title)
    if r:
        fm.write('result', '! result: %s\n', r)
    m = min(results)
    fm.plain('!')
    fm.write('wall', ' wall %f', m[0])
    fm.write('comb', ' comb %f', m[1] + m[2])
    fm.write('user', ' user %f', m[1])
    fm.write('sys',  ' sys %f', m[2])
    fm.write('count',  ' (best of %d)', count)
    fm.plain('\n')

@command('perfwalk')
def perfwalk(ui, repo, *pats):
    timer, fm = gettimer(ui)
    try:
        m = scmutil.match(repo[None], pats, {})
        timer(lambda: len(list(repo.dirstate.walk(m, [], True, False))))
    except Exception:
        try:
            m = scmutil.match(repo[None], pats, {})
            timer(lambda: len([b for a, b, c in repo.dirstate.statwalk([], m)]))
        except Exception:
            timer(lambda: len(list(cmdutil.walk(repo, pats, {}))))
    fm.end()

@command('perfannotate')
def perfannotate(ui, repo, f):
    timer, fm = gettimer(ui)
    fc = repo['.'][f]
    timer(lambda: len(fc.annotate(True)))
    fm.end()

@command('perfstatus',
         [('u', 'unknown', False,
           'ask status to look for unknown files')])
def perfstatus(ui, repo, **opts):
    #m = match.always(repo.root, repo.getcwd())
    #timer(lambda: sum(map(len, repo.dirstate.status(m, [], False, False,
    #                                                False))))
    timer, fm = gettimer(ui)
    timer(lambda: sum(map(len, repo.status(**opts))))
    fm.end()

@command('perfaddremove')
def perfaddremove(ui, repo):
    timer, fm = gettimer(ui)
    try:
        oldquiet = repo.ui.quiet
        repo.ui.quiet = True
        matcher = scmutil.match(repo[None])
        timer(lambda: scmutil.addremove(repo, matcher, "", dry_run=True))
    finally:
        repo.ui.quiet = oldquiet
        fm.end()

def clearcaches(cl):
    # behave somewhat consistently across internal API changes
    if util.safehasattr(cl, 'clearcaches'):
        cl.clearcaches()
    elif util.safehasattr(cl, '_nodecache'):
        from mercurial.node import nullid, nullrev
        cl._nodecache = {nullid: nullrev}
        cl._nodepos = None

@command('perfheads')
def perfheads(ui, repo):
    timer, fm = gettimer(ui)
    cl = repo.changelog
    def d():
        len(cl.headrevs())
        clearcaches(cl)
    timer(d)
    fm.end()

@command('perftags')
def perftags(ui, repo):
    import mercurial.changelog
    import mercurial.manifest
    timer, fm = gettimer(ui)
    def t():
        repo.changelog = mercurial.changelog.changelog(repo.sopener)
        repo.manifest = mercurial.manifest.manifest(repo.sopener)
        repo._tags = None
        return len(repo.tags())
    timer(t)
    fm.end()

@command('perfancestors')
def perfancestors(ui, repo):
    timer, fm = gettimer(ui)
    heads = repo.changelog.headrevs()
    def d():
        for a in repo.changelog.ancestors(heads):
            pass
    timer(d)
    fm.end()

@command('perfancestorset')
def perfancestorset(ui, repo, revset):
    timer, fm = gettimer(ui)
    revs = repo.revs(revset)
    heads = repo.changelog.headrevs()
    def d():
        s = repo.changelog.ancestors(heads)
        for rev in revs:
            rev in s
    timer(d)
    fm.end()

@command('perfdirs')
def perfdirs(ui, repo):
    timer, fm = gettimer(ui)
    dirstate = repo.dirstate
    'a' in dirstate
    def d():
        dirstate.dirs()
        del dirstate._dirs
    timer(d)
    fm.end()

@command('perfdirstate')
def perfdirstate(ui, repo):
    timer, fm = gettimer(ui)
    "a" in repo.dirstate
    def d():
        repo.dirstate.invalidate()
        "a" in repo.dirstate
    timer(d)
    fm.end()

@command('perfdirstatedirs')
def perfdirstatedirs(ui, repo):
    timer, fm = gettimer(ui)
    "a" in repo.dirstate
    def d():
        "a" in repo.dirstate._dirs
        del repo.dirstate._dirs
    timer(d)
    fm.end()

@command('perfdirstatefoldmap')
def perffoldmap(ui, repo):
    timer, fm = gettimer(ui)
    dirstate = repo.dirstate
    'a' in dirstate
    def d():
        dirstate._foldmap.get('a')
        del dirstate._foldmap
        del dirstate._dirs
    timer(d)
    fm.end()

@command('perfdirstatewrite')
def perfdirstatewrite(ui, repo):
    timer, fm = gettimer(ui)
    ds = repo.dirstate
    "a" in ds
    def d():
        ds._dirty = True
        ds.write()
    timer(d)
    fm.end()

@command('perfmergecalculate',
         [('r', 'rev', '.', 'rev to merge against')])
def perfmergecalculate(ui, repo, rev):
    timer, fm = gettimer(ui)
    wctx = repo[None]
    rctx = scmutil.revsingle(repo, rev, rev)
    ancestor = wctx.ancestor(rctx)
    # we don't want working dir files to be stat'd in the benchmark, so prime
    # that cache
    wctx.dirty()
    def d():
        # acceptremote is True because we don't want prompts in the middle of
        # our benchmark
        merge.calculateupdates(repo, wctx, rctx, ancestor, False, False, False,
                               acceptremote=True)
    timer(d)
    fm.end()

@command('perfpathcopies', [], "REV REV")
def perfpathcopies(ui, repo, rev1, rev2):
    timer, fm = gettimer(ui)
    ctx1 = scmutil.revsingle(repo, rev1, rev1)
    ctx2 = scmutil.revsingle(repo, rev2, rev2)
    def d():
        copies.pathcopies(ctx1, ctx2)
    timer(d)
    fm.end()

@command('perfmanifest', [], 'REV')
def perfmanifest(ui, repo, rev):
    timer, fm = gettimer(ui)
    ctx = scmutil.revsingle(repo, rev, rev)
    t = ctx.manifestnode()
    def d():
        repo.manifest._mancache.clear()
        repo.manifest._cache = None
        repo.manifest.read(t)
    timer(d)
    fm.end()

@command('perfchangeset')
def perfchangeset(ui, repo, rev):
    timer, fm = gettimer(ui)
    n = repo[rev].node()
    def d():
        repo.changelog.read(n)
        #repo.changelog._cache = None
    timer(d)
    fm.end()

@command('perfindex')
def perfindex(ui, repo):
    import mercurial.revlog
    timer, fm = gettimer(ui)
    mercurial.revlog._prereadsize = 2**24 # disable lazy parser in old hg
    n = repo["tip"].node()
    def d():
        cl = mercurial.revlog.revlog(repo.sopener, "00changelog.i")
        cl.rev(n)
    timer(d)
    fm.end()

@command('perfstartup')
def perfstartup(ui, repo):
    timer, fm = gettimer(ui)
    cmd = sys.argv[0]
    def d():
        os.system("HGRCPATH= %s version -q > /dev/null" % cmd)
    timer(d)
    fm.end()

@command('perfparents')
def perfparents(ui, repo):
    timer, fm = gettimer(ui)
    nl = [repo.changelog.node(i) for i in xrange(1000)]
    def d():
        for n in nl:
            repo.changelog.parents(n)
    timer(d)
    fm.end()

@command('perflookup')
def perflookup(ui, repo, rev):
    timer, fm = gettimer(ui)
    timer(lambda: len(repo.lookup(rev)))
    fm.end()

@command('perfrevrange')
def perfrevrange(ui, repo, *specs):
    timer, fm = gettimer(ui)
    revrange = scmutil.revrange
    timer(lambda: len(revrange(repo, specs)))
    fm.end()

@command('perfnodelookup')
def perfnodelookup(ui, repo, rev):
    timer, fm = gettimer(ui)
    import mercurial.revlog
    mercurial.revlog._prereadsize = 2**24 # disable lazy parser in old hg
    n = repo[rev].node()
    cl = mercurial.revlog.revlog(repo.sopener, "00changelog.i")
    def d():
        cl.rev(n)
        clearcaches(cl)
    timer(d)
    fm.end()

@command('perflog',
         [('', 'rename', False, 'ask log to follow renames')])
def perflog(ui, repo, **opts):
    timer, fm = gettimer(ui)
    ui.pushbuffer()
    timer(lambda: commands.log(ui, repo, rev=[], date='', user='',
                               copies=opts.get('rename')))
    ui.popbuffer()
    fm.end()

@command('perfmoonwalk')
def perfmoonwalk(ui, repo):
    """benchmark walking the changelog backwards

    This also loads the changelog data for each revision in the changelog.
    """
    timer, fm = gettimer(ui)
    def moonwalk():
        for i in xrange(len(repo), -1, -1):
            ctx = repo[i]
            ctx.branch() # read changelog data (in addition to the index)
    timer(moonwalk)
    fm.end()

@command('perftemplating')
def perftemplating(ui, repo):
    timer, fm = gettimer(ui)
    ui.pushbuffer()
    timer(lambda: commands.log(ui, repo, rev=[], date='', user='',
                               template='{date|shortdate} [{rev}:{node|short}]'
                               ' {author|person}: {desc|firstline}\n'))
    ui.popbuffer()
    fm.end()

@command('perfcca')
def perfcca(ui, repo):
    timer, fm = gettimer(ui)
    timer(lambda: scmutil.casecollisionauditor(ui, False, repo.dirstate))
    fm.end()

@command('perffncacheload')
def perffncacheload(ui, repo):
    timer, fm = gettimer(ui)
    s = repo.store
    def d():
        s.fncache._load()
    timer(d)
    fm.end()

@command('perffncachewrite')
def perffncachewrite(ui, repo):
    timer, fm = gettimer(ui)
    s = repo.store
    s.fncache._load()
    def d():
        s.fncache._dirty = True
        s.fncache.write()
    timer(d)
    fm.end()

@command('perffncacheencode')
def perffncacheencode(ui, repo):
    timer, fm = gettimer(ui)
    s = repo.store
    s.fncache._load()
    def d():
        for p in s.fncache.entries:
            s.encode(p)
    timer(d)
    fm.end()

@command('perfdiffwd')
def perfdiffwd(ui, repo):
    """Profile diff of working directory changes"""
    timer, fm = gettimer(ui)
    options = {
        'w': 'ignore_all_space',
        'b': 'ignore_space_change',
        'B': 'ignore_blank_lines',
        }

    for diffopt in ('', 'w', 'b', 'B', 'wB'):
        opts = dict((options[c], '1') for c in diffopt)
        def d():
            ui.pushbuffer()
            commands.diff(ui, repo, **opts)
            ui.popbuffer()
        title = 'diffopts: %s' % (diffopt and ('-' + diffopt) or 'none')
        timer(d, title)
    fm.end()

@command('perfrevlog',
         [('d', 'dist', 100, 'distance between the revisions')],
         "[INDEXFILE]")
def perfrevlog(ui, repo, file_, **opts):
    timer, fm = gettimer(ui)
    from mercurial import revlog
    dist = opts['dist']
    def d():
        r = revlog.revlog(lambda fn: open(fn, 'rb'), file_)
        for x in xrange(0, len(r), dist):
            r.revision(r.node(x))

    timer(d)
    fm.end()

@command('perfrevset',
         [('C', 'clear', False, 'clear volatile cache between each call.')],
         "REVSET")
def perfrevset(ui, repo, expr, clear=False):
    """benchmark the execution time of a revset

    Use the --clean option if need to evaluate the impact of build volatile
    revisions set cache on the revset execution. Volatile cache hold filtered
    and obsolete related cache."""
    timer, fm = gettimer(ui)
    def d():
        if clear:
            repo.invalidatevolatilesets()
        for r in repo.revs(expr): pass
    timer(d)
    fm.end()

@command('perfvolatilesets')
def perfvolatilesets(ui, repo, *names):
    """benchmark the computation of various volatile set

    Volatile set computes element related to filtering and obsolescence."""
    timer, fm = gettimer(ui)
    repo = repo.unfiltered()

    def getobs(name):
        def d():
            repo.invalidatevolatilesets()
            obsolete.getrevs(repo, name)
        return d

    allobs = sorted(obsolete.cachefuncs)
    if names:
        allobs = [n for n in allobs if n in names]

    for name in allobs:
        timer(getobs(name), title=name)

    def getfiltered(name):
        def d():
            repo.invalidatevolatilesets()
            repoview.filterrevs(repo, name)
        return d

    allfilter = sorted(repoview.filtertable)
    if names:
        allfilter = [n for n in allfilter if n in names]

    for name in allfilter:
        timer(getfiltered(name), title=name)
    fm.end()

@command('perfbranchmap',
         [('f', 'full', False,
           'Includes build time of subset'),
         ])
def perfbranchmap(ui, repo, full=False):
    """benchmark the update of a branchmap

    This benchmarks the full repo.branchmap() call with read and write disabled
    """
    timer, fm = gettimer(ui)
    def getbranchmap(filtername):
        """generate a benchmark function for the filtername"""
        if filtername is None:
            view = repo
        else:
            view = repo.filtered(filtername)
        def d():
            if full:
                view._branchcaches.clear()
            else:
                view._branchcaches.pop(filtername, None)
            view.branchmap()
        return d
    # add filter in smaller subset to bigger subset
    possiblefilters = set(repoview.filtertable)
    allfilters = []
    while possiblefilters:
        for name in possiblefilters:
            subset = branchmap.subsettable.get(name)
            if subset not in possiblefilters:
                break
        else:
            assert False, 'subset cycle %s!' % possiblefilters
        allfilters.append(name)
        possiblefilters.remove(name)

    # warm the cache
    if not full:
        for name in allfilters:
            repo.filtered(name).branchmap()
    # add unfiltered
    allfilters.append(None)
    oldread = branchmap.read
    oldwrite = branchmap.branchcache.write
    try:
        branchmap.read = lambda repo: None
        branchmap.write = lambda repo: None
        for name in allfilters:
            timer(getbranchmap(name), title=str(name))
    finally:
        branchmap.read = oldread
        branchmap.branchcache.write = oldwrite
    fm.end()

@command('perfloadmarkers')
def perfloadmarkers(ui, repo):
    """benchmark the time to parse the on-disk markers for a repo

    Result is the number of markers in the repo."""
    timer, fm = gettimer(ui)
    timer(lambda: len(obsolete.obsstore(repo.sopener)))
    fm.end()