view tests/test-batching.py @ 23787:678f53865c68

revset: use localrepo revbranchcache for branch name filtering

Branch name filtering in revsets was expensive. For every rev it created a
changectx and called .branch() which retrieved the branch name from the
changelog.

Instead, use the revbranchcache.

The revbranchcache is used read-only. The revset implementation with generators
and callbacks makes it hard to figure out when we are done using/updating the
cache and could write it back. It would also be 'tricky' to lock the repo for
writing from within a revset execution. Finally, the branchmap update will
usually make sure that the cache is updated before any revset can be run.
The revbranchcache is used without any locking but is short-lived and used in a
tight loop where we can assume that the changelog doesn't change ... or where
it not is relevant to us if it does.

perfrevset 'branch(mobile)' on mozilla-central.
Before:
! wall 10.989637 comb 10.970000 user 10.940000 sys 0.030000 (best of 3)
After, no cache:
! wall 7.368656 comb 7.370000 user 7.360000 sys 0.010000 (best of 3)
After, with cache:
! wall 0.528098 comb 0.530000 user 0.530000 sys 0.000000 (best of 18)

The performance improvement even without cache come from being based on
branchinfo on the changelog instead of using ctx.branch().

Some tests are added to verify that the revbranchcache works and keep an eye on
when the cache files actually are updated.

# test-batching.py - tests for transparent command batching
#
# Copyright 2011 Peter Arrenbrecht <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from mercurial.wireproto import localbatch, remotebatch, batchable, future

# equivalent of repo.repository
class thing(object):
    def hello(self):
        return "Ready."

# equivalent of localrepo.localrepository
class localthing(thing):
    def foo(self, one, two=None):
        if one:
            return "%s and %s" % (one, two,)
        return "Nope"
    def bar(self, b, a):
        return "%s und %s" % (b, a,)
    def greet(self, name=None):
        return "Hello, %s" % name
    def batch(self):
        '''Support for local batching.'''
        return localbatch(self)

# usage of "thing" interface
def use(it):

    # Direct call to base method shared between client and server.
    print it.hello()

    # Direct calls to proxied methods. They cause individual roundtrips.
    print it.foo("Un", two="Deux")
    print it.bar("Eins", "Zwei")

    # Batched call to a couple of (possibly proxied) methods.
    batch = it.batch()
    # The calls return futures to eventually hold results.
    foo = batch.foo(one="One", two="Two")
    foo2 = batch.foo(None)
    bar = batch.bar("Eins", "Zwei")
    # We can call non-batchable proxy methods, but the break the current batch
    # request and cause additional roundtrips.
    greet = batch.greet(name="John Smith")
    # We can also add local methods into the mix, but they break the batch too.
    hello = batch.hello()
    bar2 = batch.bar(b="Uno", a="Due")
    # Only now are all the calls executed in sequence, with as few roundtrips
    # as possible.
    batch.submit()
    # After the call to submit, the futures actually contain values.
    print foo.value
    print foo2.value
    print bar.value
    print greet.value
    print hello.value
    print bar2.value

# local usage
mylocal = localthing()
print
print "== Local"
use(mylocal)

# demo remoting; mimicks what wireproto and HTTP/SSH do

# shared

def escapearg(plain):
    return (plain
            .replace(':', '::')
            .replace(',', ':,')
            .replace(';', ':;')
            .replace('=', ':='))
def unescapearg(escaped):
    return (escaped
            .replace(':=', '=')
            .replace(':;', ';')
            .replace(':,', ',')
            .replace('::', ':'))

# server side

# equivalent of wireproto's global functions
class server(object):
    def __init__(self, local):
        self.local = local
    def _call(self, name, args):
        args = dict(arg.split('=', 1) for arg in args)
        return getattr(self, name)(**args)
    def perform(self, req):
        print "REQ:", req
        name, args = req.split('?', 1)
        args = args.split('&')
        vals = dict(arg.split('=', 1) for arg in args)
        res = getattr(self, name)(**vals)
        print "  ->", res
        return res
    def batch(self, cmds):
        res = []
        for pair in cmds.split(';'):
            name, args = pair.split(':', 1)
            vals = {}
            for a in args.split(','):
                if a:
                    n, v = a.split('=')
                    vals[n] = unescapearg(v)
            res.append(escapearg(getattr(self, name)(**vals)))
        return ';'.join(res)
    def foo(self, one, two):
        return mangle(self.local.foo(unmangle(one), unmangle(two)))
    def bar(self, b, a):
        return mangle(self.local.bar(unmangle(b), unmangle(a)))
    def greet(self, name):
        return mangle(self.local.greet(unmangle(name)))
myserver = server(mylocal)

# local side

# equivalent of wireproto.encode/decodelist, that is, type-specific marshalling
# here we just transform the strings a bit to check we're properly en-/decoding
def mangle(s):
    return ''.join(chr(ord(c) + 1) for c in s)
def unmangle(s):
    return ''.join(chr(ord(c) - 1) for c in s)

# equivalent of wireproto.wirerepository and something like http's wire format
class remotething(thing):
    def __init__(self, server):
        self.server = server
    def _submitone(self, name, args):
        req = name + '?' + '&'.join(['%s=%s' % (n, v) for n, v in args])
        return self.server.perform(req)
    def _submitbatch(self, cmds):
        req = []
        for name, args in cmds:
            args = ','.join(n + '=' + escapearg(v) for n, v in args)
            req.append(name + ':' + args)
        req = ';'.join(req)
        res = self._submitone('batch', [('cmds', req,)])
        return res.split(';')

    def batch(self):
        return remotebatch(self)

    @batchable
    def foo(self, one, two=None):
        if not one:
            yield "Nope", None
        encargs = [('one', mangle(one),), ('two', mangle(two),)]
        encresref = future()
        yield encargs, encresref
        yield unmangle(encresref.value)

    @batchable
    def bar(self, b, a):
        encresref = future()
        yield [('b', mangle(b),), ('a', mangle(a),)], encresref
        yield unmangle(encresref.value)

    # greet is coded directly. It therefore does not support batching. If it
    # does appear in a batch, the batch is split around greet, and the call to
    # greet is done in its own roundtrip.
    def greet(self, name=None):
        return unmangle(self._submitone('greet', [('name', mangle(name),)]))

# demo remote usage

myproxy = remotething(myserver)
print
print "== Remote"
use(myproxy)