view tests/test-blackbox.t @ 23787:678f53865c68

revset: use localrepo revbranchcache for branch name filtering

Branch name filtering in revsets was expensive. For every rev it created a
changectx and called .branch() which retrieved the branch name from the
changelog.

Instead, use the revbranchcache.

The revbranchcache is used read-only. The revset implementation with generators
and callbacks makes it hard to figure out when we are done using/updating the
cache and could write it back. It would also be 'tricky' to lock the repo for
writing from within a revset execution. Finally, the branchmap update will
usually make sure that the cache is updated before any revset can be run.
The revbranchcache is used without any locking but is short-lived and used in a
tight loop where we can assume that the changelog doesn't change ... or where
it not is relevant to us if it does.

perfrevset 'branch(mobile)' on mozilla-central.
Before:
! wall 10.989637 comb 10.970000 user 10.940000 sys 0.030000 (best of 3)
After, no cache:
! wall 7.368656 comb 7.370000 user 7.360000 sys 0.010000 (best of 3)
After, with cache:
! wall 0.528098 comb 0.530000 user 0.530000 sys 0.000000 (best of 18)

The performance improvement even without cache come from being based on
branchinfo on the changelog instead of using ctx.branch().

Some tests are added to verify that the revbranchcache works and keep an eye on
when the cache files actually are updated.

setup
  $ cat > mock.py <<EOF
  > from mercurial import util
  > 
  > def makedate():
  >     return 0, 0
  > def getuser():
  >     return 'bob'
  > # mock the date and user apis so the output is always the same
  > def uisetup(ui):
  >     util.makedate = makedate
  >     util.getuser = getuser
  > EOF
  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > blackbox=
  > mock=`pwd`/mock.py
  > mq=
  > EOF
  $ hg init blackboxtest
  $ cd blackboxtest

command, exit codes, and duration

  $ echo a > a
  $ hg add a
  $ hg blackbox
  1970/01/01 00:00:00 bob> add a
  1970/01/01 00:00:00 bob> add a exited 0 after * seconds (glob)

incoming change tracking

create two heads to verify that we only see one change in the log later
  $ hg commit -ma
  $ hg up null
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo b > b
  $ hg commit -Amb
  adding b
  created new head

clone, commit, pull
  $ hg clone . ../blackboxtest2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo c > c
  $ hg commit -Amc
  adding c
  $ cd ../blackboxtest2
  $ hg pull
  pulling from $TESTTMP/blackboxtest (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  (run 'hg update' to get a working copy)
  $ hg blackbox -l 5
  1970/01/01 00:00:00 bob> pull
  1970/01/01 00:00:00 bob> updated served branch cache in ?.???? seconds (glob)
  1970/01/01 00:00:00 bob> wrote served branch cache with 1 labels and 2 nodes
  1970/01/01 00:00:00 bob> 1 incoming changes - new heads: d02f48003e62
  1970/01/01 00:00:00 bob> pull exited 0 after * seconds (glob)

we must not cause a failure if we cannot write to the log

  $ hg rollback
  repository tip rolled back to revision 1 (undo pull)

#if unix-permissions no-root
  $ chmod 000 .hg/blackbox.log
  $ hg --debug incoming
  warning: cannot write to blackbox.log: Permission denied
  comparing with $TESTTMP/blackboxtest (glob)
  query 1; heads
  searching for changes
  all local heads known remotely
  changeset:   2:d02f48003e62c24e2659d97d30f2a83abe5d5d51
  tag:         tip
  phase:       draft
  parent:      1:6563da9dcf87b1949716e38ff3e3dfaa3198eb06
  parent:      -1:0000000000000000000000000000000000000000
  manifest:    2:ab9d46b053ebf45b7996f2922b9893ff4b63d892
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files+:      c
  extra:       branch=default
  description:
  c
  
  
#endif
  $ hg pull
  pulling from $TESTTMP/blackboxtest (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  (run 'hg update' to get a working copy)

a failure reading from the log is fine
#if unix-permissions no-root
  $ hg blackbox -l 3
  abort: Permission denied: $TESTTMP/blackboxtest2/.hg/blackbox.log
  [255]

  $ chmod 600 .hg/blackbox.log
#endif

backup bundles get logged

  $ touch d
  $ hg commit -Amd
  adding d
  created new head
  $ hg strip tip
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  saved backup bundle to $TESTTMP/blackboxtest2/.hg/strip-backup/*-backup.hg (glob)
  $ hg blackbox -l 5
  1970/01/01 00:00:00 bob> strip tip
  1970/01/01 00:00:00 bob> saved backup bundle to $TESTTMP/blackboxtest2/.hg/strip-backup/*-backup.hg (glob)
  1970/01/01 00:00:00 bob> updated base branch cache in ?.???? seconds (glob)
  1970/01/01 00:00:00 bob> wrote base branch cache with 1 labels and 2 nodes
  1970/01/01 00:00:00 bob> strip tip exited 0 after * seconds (glob)

tags cache gets logged
  $ hg up tip
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg tag -m 'create test tag' test-tag
  $ hg tags
  tip                                3:5b5562c08298
  test-tag                           2:d02f48003e62
  $ hg blackbox -l 3
  1970/01/01 00:00:00 bob> resolved 1 tags cache entries from 1 manifests in ?.???? seconds (glob)
  1970/01/01 00:00:00 bob> writing tags cache file with 2 heads and 1 tags
  1970/01/01 00:00:00 bob> tags exited 0 after ?.?? seconds (glob)

extension and python hooks - use the eol extension for a pythonhook

  $ echo '[extensions]' >> .hg/hgrc
  $ echo 'eol=' >> .hg/hgrc
  $ echo '[hooks]' >> .hg/hgrc
  $ echo 'update = echo hooked' >> .hg/hgrc
  $ hg update
  hooked
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg blackbox -l 4
  1970/01/01 00:00:00 bob> update
  1970/01/01 00:00:00 bob> pythonhook-preupdate: hgext.eol.preupdate finished in * seconds (glob)
  1970/01/01 00:00:00 bob> exthook-update: echo hooked finished in * seconds (glob)
  1970/01/01 00:00:00 bob> update exited 0 after * seconds (glob)

log rotation

  $ echo '[blackbox]' >> .hg/hgrc
  $ echo 'maxsize = 20 b' >> .hg/hgrc
  $ echo 'maxfiles = 3' >> .hg/hgrc
  $ hg status
  $ hg status
  $ hg status
  $ hg tip -q
  3:5b5562c08298
  $ ls .hg/blackbox.log*
  .hg/blackbox.log
  .hg/blackbox.log.1
  .hg/blackbox.log.2

cleanup
  $ cd ..