revset: use localrepo revbranchcache for branch name filtering
Branch name filtering in revsets was expensive. For every rev it created a
changectx and called .branch() which retrieved the branch name from the
changelog.
Instead, use the revbranchcache.
The revbranchcache is used read-only. The revset implementation with generators
and callbacks makes it hard to figure out when we are done using/updating the
cache and could write it back. It would also be 'tricky' to lock the repo for
writing from within a revset execution. Finally, the branchmap update will
usually make sure that the cache is updated before any revset can be run.
The revbranchcache is used without any locking but is short-lived and used in a
tight loop where we can assume that the changelog doesn't change ... or where
it not is relevant to us if it does.
perfrevset 'branch(mobile)' on mozilla-central.
Before:
! wall 10.989637 comb 10.970000 user 10.940000 sys 0.030000 (best of 3)
After, no cache:
! wall 7.368656 comb 7.370000 user 7.360000 sys 0.010000 (best of 3)
After, with cache:
! wall 0.528098 comb 0.530000 user 0.530000 sys 0.000000 (best of 18)
The performance improvement even without cache come from being based on
branchinfo on the changelog instead of using ctx.branch().
Some tests are added to verify that the revbranchcache works and keep an eye on
when the cache files actually are updated.
Set vars:
$ CONTRIBDIR="$TESTDIR/../contrib"
Prepare repo-a:
$ hg init repo-a
$ cd repo-a
$ echo this is file a > a
$ hg add a
$ hg commit -m first
$ echo adding to file a >> a
$ hg commit -m second
$ echo adding more to file a >> a
$ hg commit -m third
$ hg verify
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
1 files, 3 changesets, 3 total revisions
Dumping revlog of file a to stdout:
$ python "$CONTRIBDIR/dumprevlog" .hg/store/data/a.i
file: .hg/store/data/a.i
node: 183d2312b35066fb6b3b449b84efc370d50993d0
linkrev: 0
parents: 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000
length: 15
-start-
this is file a
-end-
node: b1047953b6e6b633c0d8197eaa5116fbdfd3095b
linkrev: 1
parents: 183d2312b35066fb6b3b449b84efc370d50993d0 0000000000000000000000000000000000000000
length: 32
-start-
this is file a
adding to file a
-end-
node: 8c4fd1f7129b8cdec6c7f58bf48fb5237a4030c1
linkrev: 2
parents: b1047953b6e6b633c0d8197eaa5116fbdfd3095b 0000000000000000000000000000000000000000
length: 54
-start-
this is file a
adding to file a
adding more to file a
-end-
Dump all revlogs to file repo.dump:
$ find .hg/store -name "*.i" | sort | xargs python "$CONTRIBDIR/dumprevlog" > ../repo.dump
$ cd ..
Undumping into repo-b:
$ hg init repo-b
$ cd repo-b
$ python "$CONTRIBDIR/undumprevlog" < ../repo.dump
.hg/store/00changelog.i
.hg/store/00manifest.i
.hg/store/data/a.i
$ cd ..
Rebuild fncache with clone --pull:
$ hg clone --pull -U repo-b repo-c
requesting all changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 3 changes to 1 files
Verify:
$ hg -R repo-c verify
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
1 files, 3 changesets, 3 total revisions
Compare repos:
$ hg -R repo-c incoming repo-a
comparing with repo-a
searching for changes
no changes found
[1]
$ hg -R repo-a incoming repo-c
comparing with repo-c
searching for changes
no changes found
[1]
Test simplemerge command:
$ cp "$CONTRIBDIR/simplemerge" .
$ echo base > base
$ echo local > local
$ cat base >> local
$ cp local orig
$ cat base > other
$ echo other >> other
changing local directly
$ python simplemerge local base other && echo "merge succeeded"
merge succeeded
$ cat local
local
base
other
$ cp orig local
printing to stdout
$ python simplemerge -p local base other
local
base
other
local:
$ cat local
local
base
conflicts
$ cp base conflict-local
$ cp other conflict-other
$ echo not other >> conflict-local
$ echo end >> conflict-local
$ echo end >> conflict-other
$ python simplemerge -p conflict-local base conflict-other
base
<<<<<<< conflict-local
not other
end
=======
other
end
>>>>>>> conflict-other
warning: conflicts during merge.
[1]
1 label
$ python simplemerge -p -L foo conflict-local base conflict-other
base
<<<<<<< foo
not other
end
=======
other
end
>>>>>>> conflict-other
warning: conflicts during merge.
[1]
2 labels
$ python simplemerge -p -L foo -L bar conflict-local base conflict-other
base
<<<<<<< foo
not other
end
=======
other
end
>>>>>>> bar
warning: conflicts during merge.
[1]
3 labels
$ python simplemerge -p -L foo -L bar -L base conflict-local base conflict-other
base
<<<<<<< foo
not other
end
||||||| base
=======
other
end
>>>>>>> bar
warning: conflicts during merge.
[1]
too many labels
$ python simplemerge -p -L foo -L bar -L baz -L buz conflict-local base conflict-other
abort: can only specify three labels.
[255]
binary file
$ $PYTHON -c "f = file('binary-local', 'w'); f.write('\x00'); f.close()"
$ cat orig >> binary-local
$ python simplemerge -p binary-local base other
warning: binary-local looks like a binary file.
[1]
binary file --text
$ python simplemerge -a -p binary-local base other 2>&1
warning: binary-local looks like a binary file.
\x00local (esc)
base
other
help
$ python simplemerge --help
simplemerge [OPTS] LOCAL BASE OTHER
Simple three-way file merge utility with a minimal feature set.
Apply to LOCAL the changes necessary to go from BASE to OTHER.
By default, LOCAL is overwritten with the results of this operation.
options:
-L --label labels to use on conflict markers
-a --text treat all files as text
-p --print print results instead of overwriting LOCAL
--no-minimal no effect (DEPRECATED)
-h --help display help and exit
-q --quiet suppress output
wrong number of arguments
$ python simplemerge
simplemerge: wrong number of arguments
simplemerge [OPTS] LOCAL BASE OTHER
Simple three-way file merge utility with a minimal feature set.
Apply to LOCAL the changes necessary to go from BASE to OTHER.
By default, LOCAL is overwritten with the results of this operation.
options:
-L --label labels to use on conflict markers
-a --text treat all files as text
-p --print print results instead of overwriting LOCAL
--no-minimal no effect (DEPRECATED)
-h --help display help and exit
-q --quiet suppress output
[1]
bad option
$ python simplemerge --foo -p local base other
simplemerge: option --foo not recognized
simplemerge [OPTS] LOCAL BASE OTHER
Simple three-way file merge utility with a minimal feature set.
Apply to LOCAL the changes necessary to go from BASE to OTHER.
By default, LOCAL is overwritten with the results of this operation.
options:
-L --label labels to use on conflict markers
-a --text treat all files as text
-p --print print results instead of overwriting LOCAL
--no-minimal no effect (DEPRECATED)
-h --help display help and exit
-q --quiet suppress output
[1]