view tests/test-convert-cvsnt-mergepoints.t @ 23787:678f53865c68

revset: use localrepo revbranchcache for branch name filtering

Branch name filtering in revsets was expensive. For every rev it created a
changectx and called .branch() which retrieved the branch name from the
changelog.

Instead, use the revbranchcache.

The revbranchcache is used read-only. The revset implementation with generators
and callbacks makes it hard to figure out when we are done using/updating the
cache and could write it back. It would also be 'tricky' to lock the repo for
writing from within a revset execution. Finally, the branchmap update will
usually make sure that the cache is updated before any revset can be run.
The revbranchcache is used without any locking but is short-lived and used in a
tight loop where we can assume that the changelog doesn't change ... or where
it not is relevant to us if it does.

perfrevset 'branch(mobile)' on mozilla-central.
Before:
! wall 10.989637 comb 10.970000 user 10.940000 sys 0.030000 (best of 3)
After, no cache:
! wall 7.368656 comb 7.370000 user 7.360000 sys 0.010000 (best of 3)
After, with cache:
! wall 0.528098 comb 0.530000 user 0.530000 sys 0.000000 (best of 18)

The performance improvement even without cache come from being based on
branchinfo on the changelog instead of using ctx.branch().

Some tests are added to verify that the revbranchcache works and keep an eye on
when the cache files actually are updated.

#require cvs

  $ filterpath()
  > {
  >     eval "$@" | sed "s:$CVSROOT:*REPO*:g"
  > }
  $ cvscall()
  > {
  >     cvs -f "$@"
  > }

output of 'cvs ci' varies unpredictably, so discard most of it
-- just keep the part that matters

  $ cvsci()
  > {
  >     cvs -f ci -f "$@" > /dev/null
  > }
  $ hgcat()
  > {
  >     hg --cwd src-hg cat -r tip "$1"
  > }
  $ echo "[extensions]" >> $HGRCPATH
  $ echo "convert = " >> $HGRCPATH

create cvs repository

  $ mkdir cvsmaster
  $ cd cvsmaster
  $ CVSROOT=`pwd`
  $ export CVSROOT
  $ CVS_OPTIONS=-f
  $ export CVS_OPTIONS
  $ cd ..
  $ rmdir cvsmaster
  $ filterpath cvscall -Q -d "$CVSROOT" init

checkout #1: add foo.txt

  $ cvscall -Q checkout -d cvsworktmp .
  $ cd cvsworktmp
  $ mkdir foo
  $ cvscall -Q add foo
  $ cd foo
  $ echo foo > foo.txt
  $ cvscall -Q add foo.txt
  $ cvsci -m "add foo.txt" foo.txt
  $ cd ../..
  $ rm -rf cvsworktmp

checkout #2: create MYBRANCH1 and modify foo.txt on it

  $ cvscall -Q checkout -d cvswork foo
  $ cd cvswork
  $ cvscall -q rtag -b -R MYBRANCH1 foo
  $ cvscall -Q update -P -r MYBRANCH1
  $ echo bar > foo.txt
  $ cvsci -m "bar" foo.txt
  $ echo baz > foo.txt
  $ cvsci -m "baz" foo.txt

create MYBRANCH1_2 and modify foo.txt some more

  $ cvscall -q rtag -b -R -r MYBRANCH1 MYBRANCH1_2 foo
  $ cvscall -Q update -P -r MYBRANCH1_2
  $ echo bazzie > foo.txt
  $ cvsci -m "bazzie" foo.txt

create MYBRANCH1_1 and modify foo.txt yet again

  $ cvscall -q rtag -b -R MYBRANCH1_1 foo
  $ cvscall -Q update -P -r MYBRANCH1_1
  $ echo quux > foo.txt
  $ cvsci -m "quux" foo.txt

merge MYBRANCH1 to MYBRANCH1_1

  $ filterpath cvscall -Q update -P -jMYBRANCH1
  rcsmerge: warning: conflicts during merge
  RCS file: *REPO*/foo/foo.txt,v
  retrieving revision 1.1
  retrieving revision 1.1.2.2
  Merging differences between 1.1 and 1.1.2.2 into foo.txt

carefully placed sleep to dodge cvs bug (optimization?) where it
sometimes ignores a "commit" command if it comes too fast (the -f
option in cvsci seems to work for all the other commits in this
script)

  $ sleep 1
  $ echo xyzzy > foo.txt
  $ cvsci -m "merge1+clobber" foo.txt

#if unix-permissions

return to trunk and merge MYBRANCH1_2

  $ cvscall -Q update -P -A
  $ filterpath cvscall -Q update -P -jMYBRANCH1_2
  RCS file: *REPO*/foo/foo.txt,v
  retrieving revision 1.1
  retrieving revision 1.1.2.2.2.1
  Merging differences between 1.1 and 1.1.2.2.2.1 into foo.txt
  $ cvsci -m "merge2" foo.txt
  $ REALCVS=`which cvs`
  $ echo "for x in \$*; do if [ \"\$x\" = \"rlog\" ]; then echo \"RCS file: $CVSROOT/foo/foo.txt,v\"; cat \"$TESTDIR/test-convert-cvsnt-mergepoints.rlog\"; exit 0; fi; done; $REALCVS \$*" > ../cvs
  $ chmod +x ../cvs
  $ PATH=..:${PATH} hg debugcvsps --parents foo
  collecting CVS rlog
  7 log entries
  creating changesets
  7 changeset entries
  ---------------------
  PatchSet 1 
  Date: * (glob)
  Author: user
  Branch: HEAD
  Tag: (none) 
  Branchpoints: MYBRANCH1, MYBRANCH1_1 
  Log:
  foo.txt
  
  Members: 
  	foo.txt:INITIAL->1.1 
  
  ---------------------
  PatchSet 2 
  Date: * (glob)
  Author: user
  Branch: MYBRANCH1
  Tag: (none) 
  Parent: 1
  Log:
  bar
  
  Members: 
  	foo.txt:1.1->1.1.2.1 
  
  ---------------------
  PatchSet 3 
  Date: * (glob)
  Author: user
  Branch: MYBRANCH1
  Tag: (none) 
  Branchpoints: MYBRANCH1_2 
  Parent: 2
  Log:
  baz
  
  Members: 
  	foo.txt:1.1.2.1->1.1.2.2 
  
  ---------------------
  PatchSet 4 
  Date: * (glob)
  Author: user
  Branch: MYBRANCH1_1
  Tag: (none) 
  Parent: 1
  Log:
  quux
  
  Members: 
  	foo.txt:1.1->1.1.4.1 
  
  ---------------------
  PatchSet 5 
  Date: * (glob)
  Author: user
  Branch: MYBRANCH1_2
  Tag: (none) 
  Parent: 3
  Log:
  bazzie
  
  Members: 
  	foo.txt:1.1.2.2->1.1.2.2.2.1 
  
  ---------------------
  PatchSet 6 
  Date: * (glob)
  Author: user
  Branch: HEAD
  Tag: (none) 
  Parents: 1,5
  Log:
  merge
  
  Members: 
  	foo.txt:1.1->1.2 
  
  ---------------------
  PatchSet 7 
  Date: * (glob)
  Author: user
  Branch: MYBRANCH1_1
  Tag: (none) 
  Parents: 4,3
  Log:
  merge
  
  Members: 
  	foo.txt:1.1.4.1->1.1.4.2 
  
#endif

  $ cd ..