view tests/test-mq-safety.t @ 23787:678f53865c68

revset: use localrepo revbranchcache for branch name filtering

Branch name filtering in revsets was expensive. For every rev it created a
changectx and called .branch() which retrieved the branch name from the
changelog.

Instead, use the revbranchcache.

The revbranchcache is used read-only. The revset implementation with generators
and callbacks makes it hard to figure out when we are done using/updating the
cache and could write it back. It would also be 'tricky' to lock the repo for
writing from within a revset execution. Finally, the branchmap update will
usually make sure that the cache is updated before any revset can be run.
The revbranchcache is used without any locking but is short-lived and used in a
tight loop where we can assume that the changelog doesn't change ... or where
it not is relevant to us if it does.

perfrevset 'branch(mobile)' on mozilla-central.
Before:
! wall 10.989637 comb 10.970000 user 10.940000 sys 0.030000 (best of 3)
After, no cache:
! wall 7.368656 comb 7.370000 user 7.360000 sys 0.010000 (best of 3)
After, with cache:
! wall 0.528098 comb 0.530000 user 0.530000 sys 0.000000 (best of 18)

The performance improvement even without cache come from being based on
branchinfo on the changelog instead of using ctx.branch().

Some tests are added to verify that the revbranchcache works and keep an eye on
when the cache files actually are updated.

  $ echo '[extensions]' >> $HGRCPATH
  $ echo 'hgext.mq =' >> $HGRCPATH

  $ hg init repo
  $ cd repo

  $ echo foo > foo
  $ hg ci -qAm 'add a file'

  $ hg qinit

  $ hg qnew foo
  $ echo foo >> foo
  $ hg qrefresh -m 'append foo'

  $ hg qnew bar
  $ echo bar >> foo
  $ hg qrefresh -m 'append bar'

Try to operate on public mq changeset

  $ hg qpop
  popping bar
  now at: foo
  $ hg phase --public qbase
  $ echo babar >> foo
  $ hg qref
  abort: cannot refresh immutable revision
  (see "hg help phases" for details)
  [255]
  $ hg revert -a
  reverting foo
  $ hg qpop
  abort: popping would remove an immutable revision
  (see "hg help phases" for details)
  [255]
  $ hg qfold bar
  abort: cannot refresh immutable revision
  (see "hg help phases" for details)
  [255]
  $ hg revert -a
  reverting foo

restore state for remaining test

  $ hg qpush
  applying bar
  now at: bar

try to commit on top of a patch

  $ echo quux >> foo
  $ hg ci -m 'append quux'
  abort: cannot commit over an applied mq patch
  [255]


cheat a bit...

  $ mv .hg/patches .hg/patches2
  $ hg ci -m 'append quux'
  $ mv .hg/patches2 .hg/patches


qpop/qrefresh on the wrong revision

  $ hg qpop
  abort: popping would remove a revision not managed by this patch queue
  [255]
  $ hg qpop -n patches
  using patch queue: $TESTTMP/repo/.hg/patches (glob)
  abort: popping would remove a revision not managed by this patch queue
  [255]
  $ hg qrefresh
  abort: working directory revision is not qtip
  [255]

  $ hg up -C qtip
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg qpop
  abort: popping would remove a revision not managed by this patch queue
  [255]
  $ hg qrefresh
  abort: cannot refresh a revision with children
  [255]
  $ hg tip --template '{rev} {desc}\n'
  3 append quux


qpush warning branchheads

  $ cd ..
  $ hg init branchy
  $ cd branchy
  $ echo q > q
  $ hg add q
  $ hg qnew -f qp
  $ hg qpop
  popping qp
  patch queue now empty
  $ echo a > a
  $ hg ci -Ama
  adding a
  $ hg up null
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg branch b
  marked working directory as branch b
  (branches are permanent and global, did you want a bookmark?)
  $ echo c > c
  $ hg ci -Amc
  adding c
  $ hg merge default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci -mmerge
  $ hg up default
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg log
  changeset:   2:65309210bf4e
  branch:      b
  tag:         tip
  parent:      1:707adb4c8ae1
  parent:      0:cb9a9f314b8b
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     merge
  
  changeset:   1:707adb4c8ae1
  branch:      b
  parent:      -1:000000000000
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     c
  
  changeset:   0:cb9a9f314b8b
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     a
  
  $ hg qpush
  applying qp
  now at: qp

Testing applied patches, push and --force

  $ cd ..
  $ hg init forcepush
  $ cd forcepush
  $ echo a > a
  $ hg ci -Am adda
  adding a
  $ echo a >> a
  $ hg ci -m changea
  $ hg up 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg branch branch
  marked working directory as branch branch
  (branches are permanent and global, did you want a bookmark?)
  $ echo b > b
  $ hg ci -Am addb
  adding b
  $ hg up 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg --cwd .. clone -r 0 forcepush forcepush2
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a >> a
  $ hg qnew patch

Pushing applied patch with --rev without --force

  $ hg push -r . ../forcepush2
  pushing to ../forcepush2
  abort: source has mq patches applied
  [255]

Pushing applied patch with branchhash, without --force

  $ hg push ../forcepush2#default
  pushing to ../forcepush2
  abort: source has mq patches applied
  [255]

Pushing revs excluding applied patch

  $ hg push --new-branch -r 'branch(branch)' -r 2 ../forcepush2
  pushing to ../forcepush2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files

Pushing applied patch with --force

  $ hg phase --force --secret 'mq()'
  $ hg push --force -r default ../forcepush2
  pushing to ../forcepush2
  searching for changes
  no changes found (ignored 1 secret changesets)
  [1]
  $ hg phase --draft 'mq()'
  $ hg push --force -r default ../forcepush2
  pushing to ../forcepush2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)

  $ cd ..