view tests/test-unionrepo.t @ 23787:678f53865c68

revset: use localrepo revbranchcache for branch name filtering

Branch name filtering in revsets was expensive. For every rev it created a
changectx and called .branch() which retrieved the branch name from the
changelog.

Instead, use the revbranchcache.

The revbranchcache is used read-only. The revset implementation with generators
and callbacks makes it hard to figure out when we are done using/updating the
cache and could write it back. It would also be 'tricky' to lock the repo for
writing from within a revset execution. Finally, the branchmap update will
usually make sure that the cache is updated before any revset can be run.
The revbranchcache is used without any locking but is short-lived and used in a
tight loop where we can assume that the changelog doesn't change ... or where
it not is relevant to us if it does.

perfrevset 'branch(mobile)' on mozilla-central.
Before:
! wall 10.989637 comb 10.970000 user 10.940000 sys 0.030000 (best of 3)
After, no cache:
! wall 7.368656 comb 7.370000 user 7.360000 sys 0.010000 (best of 3)
After, with cache:
! wall 0.528098 comb 0.530000 user 0.530000 sys 0.000000 (best of 18)

The performance improvement even without cache come from being based on
branchinfo on the changelog instead of using ctx.branch().

Some tests are added to verify that the revbranchcache works and keep an eye on
when the cache files actually are updated.

Test unionrepo functionality

Create one repository

  $ hg init repo1
  $ cd repo1
  $ touch repo1-0
  $ echo repo1-0 > f
  $ hg ci -Aqmrepo1-0
  $ touch repo1-1
  $ echo repo1-1 >> f
  $ hg ci -Aqmrepo1-1
  $ touch repo1-2
  $ echo repo1-2 >> f
  $ hg ci -Aqmrepo1-2
  $ hg log --template '{rev}:{node|short}  {desc|firstline}\n'
  2:68c0685446a3  repo1-2
  1:8a58db72e69d  repo1-1
  0:f093fec0529b  repo1-0
  $ tip1=`hg id -q`
  $ cd ..

- and a clone with a not-completely-trivial history

  $ hg clone -q repo1 --rev 0 repo2
  $ cd repo2
  $ touch repo2-1
  $ sed '1i\
  > repo2-1 at top
  > ' f > f.tmp
  $ mv f.tmp f
  $ hg ci -Aqmrepo2-1
  $ touch repo2-2
  $ hg pull -q ../repo1 -r 1
  $ hg merge -q
  $ hg ci -Aqmrepo2-2-merge
  $ touch repo2-3
  $ echo repo2-3 >> f
  $ hg ci -mrepo2-3
  $ hg log --template '{rev}:{node|short}  {desc|firstline}\n'
  4:2f0d178c469c  repo2-3
  3:9e6fb3e0b9da  repo2-2-merge
  2:8a58db72e69d  repo1-1
  1:c337dba826e7  repo2-1
  0:f093fec0529b  repo1-0
  $ cd ..

revisions from repo2 appear as appended / pulled to repo1

  $ hg -R union:repo1+repo2 log --template '{rev}:{node|short}  {desc|firstline}\n'
  5:2f0d178c469c  repo2-3
  4:9e6fb3e0b9da  repo2-2-merge
  3:c337dba826e7  repo2-1
  2:68c0685446a3  repo1-2
  1:8a58db72e69d  repo1-1
  0:f093fec0529b  repo1-0

manifest can be retrieved for revisions in both repos

  $ hg -R union:repo1+repo2 mani -r $tip1
  f
  repo1-0
  repo1-1
  repo1-2
  $ hg -R union:repo1+repo2 mani -r 4
  f
  repo1-0
  repo1-1
  repo2-1
  repo2-2

files can be retrieved form both repos

  $ hg -R repo1 cat repo1/f -r2
  repo1-0
  repo1-1
  repo1-2

  $ hg -R union:repo1+repo2 cat -r$tip1 repo1/f
  repo1-0
  repo1-1
  repo1-2

  $ hg -R union:repo1+repo2 cat -r4 $TESTTMP/repo1/f
  repo2-1 at top
  repo1-0
  repo1-1

files can be compared across repos

  $ hg -R union:repo1+repo2 diff -r$tip1 -rtip
  diff -r 68c0685446a3 -r 2f0d178c469c f
  --- a/f	Thu Jan 01 00:00:00 1970 +0000
  +++ b/f	Thu Jan 01 00:00:00 1970 +0000
  @@ -1,3 +1,4 @@
  +repo2-1 at top
   repo1-0
   repo1-1
  -repo1-2
  +repo2-3

heads from both repos are found correctly

  $ hg -R union:repo1+repo2 heads --template '{rev}:{node|short}  {desc|firstline}\n'
  5:2f0d178c469c  repo2-3
  2:68c0685446a3  repo1-2

revsets works across repos

  $ hg -R union:repo1+repo2 id -r "ancestor($tip1, 5)"
  8a58db72e69d

annotate works - an indication that linkrevs works

  $ hg --cwd repo1 -Runion:../repo2 annotate $TESTTMP/repo1/f -r tip
  3: repo2-1 at top
  0: repo1-0
  1: repo1-1
  5: repo2-3

union repos can be cloned ... and clones works correctly

  $ hg clone -U union:repo1+repo2 repo3
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 11 changes to 6 files (+1 heads)

  $ hg -R repo3 paths
  default = union:repo1+repo2

  $ hg -R repo3 verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  6 files, 6 changesets, 11 total revisions

  $ hg -R repo3 heads --template '{rev}:{node|short}  {desc|firstline}\n'
  5:2f0d178c469c  repo2-3
  2:68c0685446a3  repo1-2

  $ hg -R repo3 log --template '{rev}:{node|short}  {desc|firstline}\n'
  5:2f0d178c469c  repo2-3
  4:9e6fb3e0b9da  repo2-2-merge
  3:c337dba826e7  repo2-1
  2:68c0685446a3  repo1-2
  1:8a58db72e69d  repo1-1
  0:f093fec0529b  repo1-0