view tests/test-exchange-obsmarkers-case-B4.t @ 36611:6906547c8476

wireproto: don't expose legacy commands to version 2 of wire protocol

Now that we have the ability to control which transports a wire
protocol command is exposed on, let's put it to use.

We flag the "branches," "changegroup," and "changegroupsubset"
commands as only available on version 1. "branches" was used by the
legacy discovery mechanism and was replaced by the "known" and
"heads" commands. "changegroup" and "changegroupsubset" were
replaced by "getbundle."

"between" is also legacy. However, since it is used by the SSH
handshake protocol, marking it as legacy is a bit more complicated
and will be done in a later commit.

Another nuanced issue with this change is that the server-advertised
capabilities still list "changegroupsubset" despite the command not
being available. This will be addressed in a subsequent commit.

Differential Revision: https://phab.mercurial-scm.org/D2485

============================================
Testing obsolescence markers push: Cases B.4
============================================

Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).

This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.

Category B: pruning case
TestCase 4: Pruned changeset on common part of the history
Variants:
# a: explicite push
# b: bare push

B.4 Pruned changeset on common part of history
=============================================

.. {{{
..   ⊗ C
..   | ● B
..   | |
..   | ● A
..   |/
..   ● O
.. }}}
..
.. Marker exist from:
..
..  * C (prune)
..
.. Command run:
..
..  * hg push -r B
..  * hg push
..
.. Expected exchange:
..
..  * prune for C

Setup
-----

  $ . $TESTDIR/testlib/exchange-obsmarker-util.sh

initial

  $ setuprepos B.4
  creating test repo for test case B.4
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A
  $ mkcommit B
  $ hg phase --public .
  $ hg push ../pushdest
  pushing to ../pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 2 changesets with 2 changes to 2 files
  $ hg push ../pulldest
  pushing to ../pulldest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 2 changesets with 2 changes to 2 files
  $ hg update -q 0
  $ mkcommit C
  created new head
  $ hg prune -qd '0 0' .
  $ hg log -G --hidden
  x  7f7f229b13a6 (draft): C
  |
  | o  f6fbb35d8ac9 (public): B
  | |
  | o  f5bc6836db60 (public): A
  |/
  @  a9bdc8b26820 (public): O
  
  $ inspect_obsmarkers
  obsstore content
  ================
  7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  $ cd ..
  $ cd ..

  $ cp -R B.4 B.4.a
  $ cp -R B.4 B.4.b

Actual Test (explicit push version)
-----------------------------------

  $ dotest B.4.a O
  ## Running testcase B.4.a
  # testing echange of "O" (a9bdc8b26820)
  ## initial state
  # obstore: main
  7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "O" from main to pushdest
  pushing to pushdest
  searching for changes
  no changes found
  remote: 1 new obsolescence markers
  ## post push state
  # obstore: main
  7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling "a9bdc8b26820" from main into pulldest
  pulling from main
  no changes found
  1 new obsolescence markers
  ## post pull state
  # obstore: main
  7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}

Actual Test (bare push version)
-----------------------------------

  $ dotest B.4.b
  ## Running testcase B.4.b
  ## initial state
  # obstore: main
  7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing from main to pushdest
  pushing to pushdest
  searching for changes
  no changes found
  remote: 1 new obsolescence markers
  ## post push state
  # obstore: main
  7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling from main into pulldest
  pulling from main
  searching for changes
  no changes found
  1 new obsolescence markers
  ## post pull state
  # obstore: main
  7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}