Mercurial > hg
view tests/test-http-bad-server.t @ 36611:6906547c8476
wireproto: don't expose legacy commands to version 2 of wire protocol
Now that we have the ability to control which transports a wire
protocol command is exposed on, let's put it to use.
We flag the "branches," "changegroup," and "changegroupsubset"
commands as only available on version 1. "branches" was used by the
legacy discovery mechanism and was replaced by the "known" and
"heads" commands. "changegroup" and "changegroupsubset" were
replaced by "getbundle."
"between" is also legacy. However, since it is used by the SSH
handshake protocol, marking it as legacy is a bit more complicated
and will be done in a later commit.
Another nuanced issue with this change is that the server-advertised
capabilities still list "changegroupsubset" despite the command not
being available. This will be addressed in a subsequent commit.
Differential Revision: https://phab.mercurial-scm.org/D2485
author | Gregory Szorc <gregory.szorc@gmail.com> |
---|---|
date | Tue, 27 Feb 2018 15:06:10 -0800 |
parents | 1d118f9f4f57 |
children | e89959970a08 |
line wrap: on
line source
#require killdaemons serve zstd Client version is embedded in HTTP request and is effectively dynamic. Pin the version so behavior is deterministic. $ cat > fakeversion.py << EOF > from mercurial import util > util.version = lambda: '4.2' > EOF $ cat >> $HGRCPATH << EOF > [extensions] > fakeversion = `pwd`/fakeversion.py > [devel] > legacy.exchange = phases > EOF $ hg init server0 $ cd server0 $ touch foo $ hg -q commit -A -m initial Also disable compression because zstd is optional and causes output to vary and because debugging partial responses is hard when compression is involved $ cat > .hg/hgrc << EOF > [extensions] > badserver = $TESTDIR/badserverext.py > [server] > compressionengines = none > EOF Failure to accept() socket should result in connection related error message $ hg serve --config badserver.closebeforeaccept=true -p $HGPORT -d --pid-file=hg.pid $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone abort: error: $ECONNRESET$ [255] (The server exits on its own, but there is a race between that and starting a new server. So ensure the process is dead.) $ killdaemons.py $DAEMON_PIDS Failure immediately after accept() should yield connection related error message $ hg serve --config badserver.closeafteraccept=true -p $HGPORT -d --pid-file=hg.pid $ cat hg.pid > $DAEMON_PIDS TODO: this usually outputs good results, but sometimes emits abort: error: '' on FreeBSD and OS X. What we ideally want are: abort: error: $ECONNRESET$ The flakiness in this output was observable easily with --runs-per-test=20 on macOS 10.12 during the freeze for 4.2. $ hg clone http://localhost:$HGPORT/ clone abort: error: * (glob) [255] $ killdaemons.py $DAEMON_PIDS Failure to read all bytes in initial HTTP request should yield connection related error message $ hg serve --config badserver.closeafterrecvbytes=1 -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone abort: error: bad HTTP status line: '' [255] $ killdaemons.py $DAEMON_PIDS $ cat error.log readline(1 from 65537) -> (1) G read limit reached; closing socket $ rm -f error.log Same failure, but server reads full HTTP request line $ hg serve --config badserver.closeafterrecvbytes=40 -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone abort: error: bad HTTP status line: '' [255] $ killdaemons.py $DAEMON_PIDS $ cat error.log readline(40 from 65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n readline(7 from -1) -> (7) Accept- read limit reached; closing socket $ rm -f error.log Failure on subsequent HTTP request on the same socket (cmd?batch) $ hg serve --config badserver.closeafterrecvbytes=210 -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone abort: error: bad HTTP status line: '' [255] $ killdaemons.py $DAEMON_PIDS $ cat error.log readline(210 from 65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n readline(177 from -1) -> (27) Accept-Encoding: identity\r\n readline(150 from -1) -> (35) accept: application/mercurial-0.1\r\n readline(115 from -1) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(9? from -1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob) readline(4? from -1) -> (2) \r\n (glob) write(36) -> HTTP/1.1 200 Script output follows\r\n write(23) -> Server: badhttpserver\r\n write(37) -> Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n write(41) -> Content-Type: application/mercurial-0.1\r\n write(21) -> Content-Length: 417\r\n write(2) -> \r\n write(417) -> lookup changegroupsubset branchmap pushkey known getbundle unbundlehash batch streamreqs=generaldelta,revlogv1 bundle2=HG20%0Abookmarks%0Achangegroup%3D01%2C02%0Adigests%3Dmd5%2Csha1%2Csha512%0Aerror%3Dabort%2Cunsupportedcontent%2Cpushraced%2Cpushkey%0Ahgtagsfnodes%0Alistkeys%0Apushkey%0Aremote-changegroup%3Dhttp%2Chttps unbundle=HG10GZ,HG10BZ,HG10UN httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx compression=none readline(4? from 65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n (glob) readline(1? from -1) -> (1?) Accept-Encoding* (glob) read limit reached; closing socket readline(210 from 65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n readline(184 from -1) -> (27) Accept-Encoding: identity\r\n readline(157 from -1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n readline(128 from -1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n readline(87 from -1) -> (48) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$\r\n readline(39 from -1) -> (35) accept: application/mercurial-0.1\r\n readline(4 from -1) -> (4) host read limit reached; closing socket $ rm -f error.log Failure to read getbundle HTTP request $ hg serve --config badserver.closeafterrecvbytes=304 -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone requesting all changes abort: error: bad HTTP status line: '' [255] $ killdaemons.py $DAEMON_PIDS $ cat error.log readline(1 from -1) -> (1) x (?) readline(1 from -1) -> (1) x (?) readline(304 from 65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n readline(271 from -1) -> (27) Accept-Encoding: identity\r\n readline(244 from -1) -> (35) accept: application/mercurial-0.1\r\n readline(209 from -1) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(18? from -1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob) readline(13? from -1) -> (2) \r\n (glob) write(36) -> HTTP/1.1 200 Script output follows\r\n write(23) -> Server: badhttpserver\r\n write(37) -> Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n write(41) -> Content-Type: application/mercurial-0.1\r\n write(21) -> Content-Length: 417\r\n write(2) -> \r\n write(417) -> lookup changegroupsubset branchmap pushkey known getbundle unbundlehash batch streamreqs=generaldelta,revlogv1 bundle2=HG20%0Abookmarks%0Achangegroup%3D01%2C02%0Adigests%3Dmd5%2Csha1%2Csha512%0Aerror%3Dabort%2Cunsupportedcontent%2Cpushraced%2Cpushkey%0Ahgtagsfnodes%0Alistkeys%0Apushkey%0Aremote-changegroup%3Dhttp%2Chttps unbundle=HG10GZ,HG10BZ,HG10UN httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx compression=none readline(13? from 65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n (glob) readline(1?? from -1) -> (27) Accept-Encoding: identity\r\n (glob) readline(8? from -1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n (glob) readline(5? from -1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n (glob) readline(1? from -1) -> (1?) x-hgproto-1:* (glob) read limit reached; closing socket readline(304 from 65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n readline(278 from -1) -> (27) Accept-Encoding: identity\r\n readline(251 from -1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n readline(222 from -1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n readline(181 from -1) -> (48) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$\r\n readline(133 from -1) -> (35) accept: application/mercurial-0.1\r\n readline(98 from -1) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(7? from -1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob) readline(2? from -1) -> (2) \r\n (glob) write(36) -> HTTP/1.1 200 Script output follows\r\n write(23) -> Server: badhttpserver\r\n write(37) -> Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n write(41) -> Content-Type: application/mercurial-0.1\r\n write(20) -> Content-Length: 42\r\n write(2) -> \r\n write(42) -> 96ee1d7354c4ad7372047672c36a1f561e3a6a4c\n; readline(2? from 65537) -> (2?) GET /?cmd=getbundle HTTP* (glob) read limit reached; closing socket readline(304 from 65537) -> (30) GET /?cmd=getbundle HTTP/1.1\r\n readline(274 from -1) -> (27) Accept-Encoding: identity\r\n readline(247 from -1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n readline(218 from -1) -> (218) x-hgarg-1: bookmarks=1&bundlecaps=HG20%2Cbundle2%3DHG20%250Abookmarks%250Achangegroup%253D01%252C02%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtag read limit reached; closing socket $ rm -f error.log Now do a variation using POST to send arguments $ hg serve --config experimental.httppostargs=true --config badserver.closeafterrecvbytes=315 -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone abort: error: bad HTTP status line: '' [255] $ killdaemons.py $DAEMON_PIDS $ cat error.log readline(315 from 65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n readline(282 from -1) -> (27) Accept-Encoding: identity\r\n readline(255 from -1) -> (35) accept: application/mercurial-0.1\r\n readline(220 from -1) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(19? from -1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob) readline(14? from -1) -> (2) \r\n (glob) write(36) -> HTTP/1.1 200 Script output follows\r\n write(23) -> Server: badhttpserver\r\n write(37) -> Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n write(41) -> Content-Type: application/mercurial-0.1\r\n write(21) -> Content-Length: 430\r\n write(2) -> \r\n write(430) -> lookup changegroupsubset branchmap pushkey known getbundle unbundlehash batch streamreqs=generaldelta,revlogv1 bundle2=HG20%0Abookmarks%0Achangegroup%3D01%2C02%0Adigests%3Dmd5%2Csha1%2Csha512%0Aerror%3Dabort%2Cunsupportedcontent%2Cpushraced%2Cpushkey%0Ahgtagsfnodes%0Alistkeys%0Apushkey%0Aremote-changegroup%3Dhttp%2Chttps unbundle=HG10GZ,HG10BZ,HG10UN httpheader=1024 httppostargs httpmediatype=0.1rx,0.1tx,0.2tx compression=none readline\(14[67] from 65537\) -> \(2[67]\) POST /\?cmd=batch HTTP/1.1\\r\\n (re) readline\(1(19|20) from -1\) -> \(27\) Accept-Encoding: identity\\r\\n (re) readline(9? from -1) -> (41) content-type: application/mercurial-0.1\r\n (glob) readline(5? from -1) -> (19) vary: X-HgProto-1\r\n (glob) readline(3? from -1) -> (19) x-hgargs-post: 28\r\n (glob) readline(1? from -1) -> (1?) x-hgproto-1: * (glob) read limit reached; closing socket readline(315 from 65537) -> (27) POST /?cmd=batch HTTP/1.1\r\n readline(288 from -1) -> (27) Accept-Encoding: identity\r\n readline(261 from -1) -> (41) content-type: application/mercurial-0.1\r\n readline(220 from -1) -> (19) vary: X-HgProto-1\r\n readline(201 from -1) -> (19) x-hgargs-post: 28\r\n readline(182 from -1) -> (48) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$\r\n readline(134 from -1) -> (35) accept: application/mercurial-0.1\r\n readline(99 from -1) -> (20) content-length: 28\r\n readline(79 from -1) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(5? from -1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob) readline(? from -1) -> (2) \r\n (glob) read(? from 28) -> (?) cmds=* (glob) read limit reached, closing socket write(36) -> HTTP/1.1 500 Internal Server Error\r\n $ rm -f error.log Now move on to partial server responses Server sends a single character from the HTTP response line $ hg serve --config badserver.closeaftersendbytes=1 -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone abort: error: bad HTTP status line: H [255] $ killdaemons.py $DAEMON_PIDS $ cat error.log readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n readline(-1) -> (27) Accept-Encoding: identity\r\n readline(-1) -> (35) accept: application/mercurial-0.1\r\n readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n readline(-1) -> (2) \r\n write(1 from 36) -> (0) H write limit reached; closing socket write(36) -> HTTP/1.1 500 Internal Server Error\r\n $ rm -f error.log Server sends an incomplete capabilities response body $ hg serve --config badserver.closeaftersendbytes=180 -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone abort: HTTP request error (incomplete response; expected 397 bytes got 20) (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator) [255] $ killdaemons.py $DAEMON_PIDS $ cat error.log readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n readline(-1) -> (27) Accept-Encoding: identity\r\n readline(-1) -> (35) accept: application/mercurial-0.1\r\n readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n readline(-1) -> (2) \r\n write(36 from 36) -> (144) HTTP/1.1 200 Script output follows\r\n write(23 from 23) -> (121) Server: badhttpserver\r\n write(37 from 37) -> (84) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n write(41 from 41) -> (43) Content-Type: application/mercurial-0.1\r\n write(21 from 21) -> (22) Content-Length: 417\r\n write(2 from 2) -> (20) \r\n write(20 from 417) -> (0) lookup changegroupsu write limit reached; closing socket $ rm -f error.log Server sends incomplete headers for batch request $ hg serve --config badserver.closeaftersendbytes=695 -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS TODO this output is horrible $ hg clone http://localhost:$HGPORT/ clone abort: 'http://localhost:$HGPORT/' does not appear to be an hg repository: ---%<--- (applicat) ---%<--- ! [255] $ killdaemons.py $DAEMON_PIDS $ cat error.log readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n readline(-1) -> (27) Accept-Encoding: identity\r\n readline(-1) -> (35) accept: application/mercurial-0.1\r\n readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n readline(-1) -> (2) \r\n write(36 from 36) -> (659) HTTP/1.1 200 Script output follows\r\n write(23 from 23) -> (636) Server: badhttpserver\r\n write(37 from 37) -> (599) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n write(41 from 41) -> (558) Content-Type: application/mercurial-0.1\r\n write(21 from 21) -> (537) Content-Length: 417\r\n write(2 from 2) -> (535) \r\n write(417 from 417) -> (118) lookup changegroupsubset branchmap pushkey known getbundle unbundlehash batch streamreqs=generaldelta,revlogv1 bundle2=HG20%0Abookmarks%0Achangegroup%3D01%2C02%0Adigests%3Dmd5%2Csha1%2Csha512%0Aerror%3Dabort%2Cunsupportedcontent%2Cpushraced%2Cpushkey%0Ahgtagsfnodes%0Alistkeys%0Apushkey%0Aremote-changegroup%3Dhttp%2Chttps unbundle=HG10GZ,HG10BZ,HG10UN httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx compression=none readline(65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n readline(-1) -> (27) Accept-Encoding: identity\r\n readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n readline(-1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n readline(-1) -> (48) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$\r\n readline(-1) -> (35) accept: application/mercurial-0.1\r\n readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n readline(-1) -> (2) \r\n write(36 from 36) -> (82) HTTP/1.1 200 Script output follows\r\n write(23 from 23) -> (59) Server: badhttpserver\r\n write(37 from 37) -> (22) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n write(22 from 41) -> (0) Content-Type: applicat write limit reached; closing socket write(36) -> HTTP/1.1 500 Internal Server Error\r\n $ rm -f error.log Server sends an incomplete HTTP response body to batch request $ hg serve --config badserver.closeaftersendbytes=760 -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS TODO client spews a stack due to uncaught ValueError in batch.results() #if no-chg $ hg clone http://localhost:$HGPORT/ clone 2> /dev/null [1] #else $ hg clone http://localhost:$HGPORT/ clone 2> /dev/null [255] #endif $ killdaemons.py $DAEMON_PIDS $ cat error.log readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n readline(-1) -> (27) Accept-Encoding: identity\r\n readline(-1) -> (35) accept: application/mercurial-0.1\r\n readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n readline(-1) -> (2) \r\n write(36 from 36) -> (724) HTTP/1.1 200 Script output follows\r\n write(23 from 23) -> (701) Server: badhttpserver\r\n write(37 from 37) -> (664) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n write(41 from 41) -> (623) Content-Type: application/mercurial-0.1\r\n write(21 from 21) -> (602) Content-Length: 417\r\n write(2 from 2) -> (600) \r\n write(417 from 417) -> (183) lookup changegroupsubset branchmap pushkey known getbundle unbundlehash batch streamreqs=generaldelta,revlogv1 bundle2=HG20%0Abookmarks%0Achangegroup%3D01%2C02%0Adigests%3Dmd5%2Csha1%2Csha512%0Aerror%3Dabort%2Cunsupportedcontent%2Cpushraced%2Cpushkey%0Ahgtagsfnodes%0Alistkeys%0Apushkey%0Aremote-changegroup%3Dhttp%2Chttps unbundle=HG10GZ,HG10BZ,HG10UN httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx compression=none readline(65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n readline(-1) -> (27) Accept-Encoding: identity\r\n readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n readline(-1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n readline(-1) -> (48) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$\r\n readline(-1) -> (35) accept: application/mercurial-0.1\r\n readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n readline(-1) -> (2) \r\n write(36 from 36) -> (147) HTTP/1.1 200 Script output follows\r\n write(23 from 23) -> (124) Server: badhttpserver\r\n write(37 from 37) -> (87) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n write(41 from 41) -> (46) Content-Type: application/mercurial-0.1\r\n write(20 from 20) -> (26) Content-Length: 42\r\n write(2 from 2) -> (24) \r\n write(24 from 42) -> (0) 96ee1d7354c4ad7372047672 write limit reached; closing socket $ rm -f error.log Server sends incomplete headers for getbundle response $ hg serve --config badserver.closeaftersendbytes=907 -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS TODO this output is terrible $ hg clone http://localhost:$HGPORT/ clone requesting all changes abort: 'http://localhost:$HGPORT/' does not appear to be an hg repository: ---%<--- (application/mercuri) ---%<--- ! [255] $ killdaemons.py $DAEMON_PIDS $ cat error.log readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n readline(-1) -> (27) Accept-Encoding: identity\r\n readline(-1) -> (35) accept: application/mercurial-0.1\r\n readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n readline(-1) -> (2) \r\n write(36 from 36) -> (871) HTTP/1.1 200 Script output follows\r\n write(23 from 23) -> (848) Server: badhttpserver\r\n write(37 from 37) -> (811) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n write(41 from 41) -> (770) Content-Type: application/mercurial-0.1\r\n write(21 from 21) -> (749) Content-Length: 417\r\n write(2 from 2) -> (747) \r\n write(417 from 417) -> (330) lookup changegroupsubset branchmap pushkey known getbundle unbundlehash batch streamreqs=generaldelta,revlogv1 bundle2=HG20%0Abookmarks%0Achangegroup%3D01%2C02%0Adigests%3Dmd5%2Csha1%2Csha512%0Aerror%3Dabort%2Cunsupportedcontent%2Cpushraced%2Cpushkey%0Ahgtagsfnodes%0Alistkeys%0Apushkey%0Aremote-changegroup%3Dhttp%2Chttps unbundle=HG10GZ,HG10BZ,HG10UN httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx compression=none readline(65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n readline(-1) -> (27) Accept-Encoding: identity\r\n readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n readline(-1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n readline(-1) -> (48) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$\r\n readline(-1) -> (35) accept: application/mercurial-0.1\r\n readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n readline(-1) -> (2) \r\n write(36 from 36) -> (294) HTTP/1.1 200 Script output follows\r\n write(23 from 23) -> (271) Server: badhttpserver\r\n write(37 from 37) -> (234) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n write(41 from 41) -> (193) Content-Type: application/mercurial-0.1\r\n write(20 from 20) -> (173) Content-Length: 42\r\n write(2 from 2) -> (171) \r\n write(42 from 42) -> (129) 96ee1d7354c4ad7372047672c36a1f561e3a6a4c\n; readline(65537) -> (30) GET /?cmd=getbundle HTTP/1.1\r\n readline(-1) -> (27) Accept-Encoding: identity\r\n readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n readline(-1) -> (440) x-hgarg-1: bookmarks=1&bundlecaps=HG20%2Cbundle2%3DHG20%250Abookmarks%250Achangegroup%253D01%252C02%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps%250Astream%253Dv2&cg=1&common=0000000000000000000000000000000000000000&heads=96ee1d7354c4ad7372047672c36a1f561e3a6a4c&listkeys=phases%2Cbookmarks\r\n readline(-1) -> (48) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$\r\n readline(-1) -> (35) accept: application/mercurial-0.1\r\n readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n readline(-1) -> (2) \r\n write(36 from 36) -> (93) HTTP/1.1 200 Script output follows\r\n write(23 from 23) -> (70) Server: badhttpserver\r\n write(37 from 37) -> (33) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n write(33 from 41) -> (0) Content-Type: application/mercuri write limit reached; closing socket write(36) -> HTTP/1.1 500 Internal Server Error\r\n $ rm -f error.log Server sends empty HTTP body for getbundle $ hg serve --config badserver.closeaftersendbytes=945 -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone requesting all changes abort: HTTP request error (incomplete response) (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator) [255] $ killdaemons.py $DAEMON_PIDS $ cat error.log readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n readline(-1) -> (27) Accept-Encoding: identity\r\n readline(-1) -> (35) accept: application/mercurial-0.1\r\n readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n readline(-1) -> (2) \r\n write(36 from 36) -> (909) HTTP/1.1 200 Script output follows\r\n write(23 from 23) -> (886) Server: badhttpserver\r\n write(37 from 37) -> (849) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n write(41 from 41) -> (808) Content-Type: application/mercurial-0.1\r\n write(21 from 21) -> (787) Content-Length: 417\r\n write(2 from 2) -> (785) \r\n write(417 from 417) -> (368) lookup changegroupsubset branchmap pushkey known getbundle unbundlehash batch streamreqs=generaldelta,revlogv1 bundle2=HG20%0Abookmarks%0Achangegroup%3D01%2C02%0Adigests%3Dmd5%2Csha1%2Csha512%0Aerror%3Dabort%2Cunsupportedcontent%2Cpushraced%2Cpushkey%0Ahgtagsfnodes%0Alistkeys%0Apushkey%0Aremote-changegroup%3Dhttp%2Chttps unbundle=HG10GZ,HG10BZ,HG10UN httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx compression=none readline(65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n readline(-1) -> (27) Accept-Encoding: identity\r\n readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n readline(-1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n readline(-1) -> (48) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$\r\n readline(-1) -> (35) accept: application/mercurial-0.1\r\n readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n readline(-1) -> (2) \r\n write(36 from 36) -> (332) HTTP/1.1 200 Script output follows\r\n write(23 from 23) -> (309) Server: badhttpserver\r\n write(37 from 37) -> (272) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n write(41 from 41) -> (231) Content-Type: application/mercurial-0.1\r\n write(20 from 20) -> (211) Content-Length: 42\r\n write(2 from 2) -> (209) \r\n write(42 from 42) -> (167) 96ee1d7354c4ad7372047672c36a1f561e3a6a4c\n; readline(65537) -> (30) GET /?cmd=getbundle HTTP/1.1\r\n readline(-1) -> (27) Accept-Encoding: identity\r\n readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n readline(-1) -> (440) x-hgarg-1: bookmarks=1&bundlecaps=HG20%2Cbundle2%3DHG20%250Abookmarks%250Achangegroup%253D01%252C02%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps%250Astream%253Dv2&cg=1&common=0000000000000000000000000000000000000000&heads=96ee1d7354c4ad7372047672c36a1f561e3a6a4c&listkeys=phases%2Cbookmarks\r\n readline(-1) -> (48) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$\r\n readline(-1) -> (35) accept: application/mercurial-0.1\r\n readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n readline(-1) -> (2) \r\n write(36 from 36) -> (131) HTTP/1.1 200 Script output follows\r\n write(23 from 23) -> (108) Server: badhttpserver\r\n write(37 from 37) -> (71) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n write(41 from 41) -> (30) Content-Type: application/mercurial-0.2\r\n write(28 from 28) -> (2) Transfer-Encoding: chunked\r\n write(2 from 2) -> (0) \r\n write limit reached; closing socket write(36) -> HTTP/1.1 500 Internal Server Error\r\n $ rm -f error.log Server sends partial compression string $ hg serve --config badserver.closeaftersendbytes=969 -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone requesting all changes abort: HTTP request error (incomplete response) (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator) [255] $ killdaemons.py $DAEMON_PIDS $ cat error.log readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n readline(-1) -> (27) Accept-Encoding: identity\r\n readline(-1) -> (35) accept: application/mercurial-0.1\r\n readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n readline(-1) -> (2) \r\n write(36 from 36) -> (933) HTTP/1.1 200 Script output follows\r\n write(23 from 23) -> (910) Server: badhttpserver\r\n write(37 from 37) -> (873) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n write(41 from 41) -> (832) Content-Type: application/mercurial-0.1\r\n write(21 from 21) -> (811) Content-Length: 417\r\n write(2 from 2) -> (809) \r\n write(417 from 417) -> (392) lookup changegroupsubset branchmap pushkey known getbundle unbundlehash batch streamreqs=generaldelta,revlogv1 bundle2=HG20%0Abookmarks%0Achangegroup%3D01%2C02%0Adigests%3Dmd5%2Csha1%2Csha512%0Aerror%3Dabort%2Cunsupportedcontent%2Cpushraced%2Cpushkey%0Ahgtagsfnodes%0Alistkeys%0Apushkey%0Aremote-changegroup%3Dhttp%2Chttps unbundle=HG10GZ,HG10BZ,HG10UN httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx compression=none readline(65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n readline(-1) -> (27) Accept-Encoding: identity\r\n readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n readline(-1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n readline(-1) -> (48) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$\r\n readline(-1) -> (35) accept: application/mercurial-0.1\r\n readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n readline(-1) -> (2) \r\n write(36 from 36) -> (356) HTTP/1.1 200 Script output follows\r\n write(23 from 23) -> (333) Server: badhttpserver\r\n write(37 from 37) -> (296) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n write(41 from 41) -> (255) Content-Type: application/mercurial-0.1\r\n write(20 from 20) -> (235) Content-Length: 42\r\n write(2 from 2) -> (233) \r\n write(42 from 42) -> (191) 96ee1d7354c4ad7372047672c36a1f561e3a6a4c\n; readline(65537) -> (30) GET /?cmd=getbundle HTTP/1.1\r\n readline(-1) -> (27) Accept-Encoding: identity\r\n readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n readline(-1) -> (440) x-hgarg-1: bookmarks=1&bundlecaps=HG20%2Cbundle2%3DHG20%250Abookmarks%250Achangegroup%253D01%252C02%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps%250Astream%253Dv2&cg=1&common=0000000000000000000000000000000000000000&heads=96ee1d7354c4ad7372047672c36a1f561e3a6a4c&listkeys=phases%2Cbookmarks\r\n readline(-1) -> (48) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$\r\n readline(-1) -> (35) accept: application/mercurial-0.1\r\n readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob) readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n readline(-1) -> (2) \r\n write(36 from 36) -> (155) HTTP/1.1 200 Script output follows\r\n write(23 from 23) -> (132) Server: badhttpserver\r\n write(37 from 37) -> (95) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n write(41 from 41) -> (54) Content-Type: application/mercurial-0.2\r\n write(28 from 28) -> (26) Transfer-Encoding: chunked\r\n write(2 from 2) -> (24) \r\n write(6 from 6) -> (18) 1\\r\\n\x04\\r\\n (esc) write(9 from 9) -> (9) 4\r\nnone\r\n write(9 from 9) -> (0) 4\r\nHG20\r\n write limit reached; closing socket write(27) -> 15\r\nInternal Server Error\r\n $ rm -f error.log Server sends partial bundle2 header magic $ hg serve --config badserver.closeaftersendbytes=966 -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone requesting all changes abort: HTTP request error (incomplete response; expected 1 bytes got 3) (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator) [255] $ killdaemons.py $DAEMON_PIDS $ tail -7 error.log write(28 from 28) -> (23) Transfer-Encoding: chunked\r\n write(2 from 2) -> (21) \r\n write(6 from 6) -> (15) 1\\r\\n\x04\\r\\n (esc) write(9 from 9) -> (6) 4\r\nnone\r\n write(6 from 9) -> (0) 4\r\nHG2 write limit reached; closing socket write(27) -> 15\r\nInternal Server Error\r\n $ rm -f error.log Server sends incomplete bundle2 stream params length $ hg serve --config badserver.closeaftersendbytes=975 -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone requesting all changes abort: HTTP request error (incomplete response; expected 1 bytes got 3) (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator) [255] $ killdaemons.py $DAEMON_PIDS $ tail -8 error.log write(28 from 28) -> (32) Transfer-Encoding: chunked\r\n write(2 from 2) -> (30) \r\n write(6 from 6) -> (24) 1\\r\\n\x04\\r\\n (esc) write(9 from 9) -> (15) 4\r\nnone\r\n write(9 from 9) -> (6) 4\r\nHG20\r\n write(6 from 9) -> (0) 4\\r\\n\x00\x00\x00 (esc) write limit reached; closing socket write(27) -> 15\r\nInternal Server Error\r\n $ rm -f error.log Servers stops after bundle2 stream params header $ hg serve --config badserver.closeaftersendbytes=978 -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone requesting all changes abort: HTTP request error (incomplete response) (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator) [255] $ killdaemons.py $DAEMON_PIDS $ tail -8 error.log write(28 from 28) -> (35) Transfer-Encoding: chunked\r\n write(2 from 2) -> (33) \r\n write(6 from 6) -> (27) 1\\r\\n\x04\\r\\n (esc) write(9 from 9) -> (18) 4\r\nnone\r\n write(9 from 9) -> (9) 4\r\nHG20\r\n write(9 from 9) -> (0) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) write limit reached; closing socket write(27) -> 15\r\nInternal Server Error\r\n $ rm -f error.log Server stops sending after bundle2 part header length $ hg serve --config badserver.closeaftersendbytes=987 -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone requesting all changes abort: HTTP request error (incomplete response) (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator) [255] $ killdaemons.py $DAEMON_PIDS $ tail -9 error.log write(28 from 28) -> (44) Transfer-Encoding: chunked\r\n write(2 from 2) -> (42) \r\n write(6 from 6) -> (36) 1\\r\\n\x04\\r\\n (esc) write(9 from 9) -> (27) 4\r\nnone\r\n write(9 from 9) -> (18) 4\r\nHG20\r\n write(9 from 9) -> (9) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) write(9 from 9) -> (0) 4\\r\\n\x00\x00\x00)\\r\\n (esc) write limit reached; closing socket write(27) -> 15\r\nInternal Server Error\r\n $ rm -f error.log Server stops sending after bundle2 part header $ hg serve --config badserver.closeaftersendbytes=1034 -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone requesting all changes adding changesets transaction abort! rollback completed abort: HTTP request error (incomplete response) (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator) [255] $ killdaemons.py $DAEMON_PIDS $ tail -10 error.log write(28 from 28) -> (91) Transfer-Encoding: chunked\r\n write(2 from 2) -> (89) \r\n write(6 from 6) -> (83) 1\\r\\n\x04\\r\\n (esc) write(9 from 9) -> (74) 4\r\nnone\r\n write(9 from 9) -> (65) 4\r\nHG20\r\n write(9 from 9) -> (56) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) write(9 from 9) -> (47) 4\\r\\n\x00\x00\x00)\\r\\n (esc) write(47 from 47) -> (0) 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02 \x01version02nbchanges1\\r\\n (esc) write limit reached; closing socket write(27) -> 15\r\nInternal Server Error\r\n $ rm -f error.log Server stops after bundle2 part payload chunk size $ hg serve --config badserver.closeaftersendbytes=1055 -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone requesting all changes adding changesets transaction abort! rollback completed abort: HTTP request error (incomplete response; expected 459 bytes got 7) (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator) [255] $ killdaemons.py $DAEMON_PIDS $ tail -11 error.log write(2 from 2) -> (110) \r\n write(6 from 6) -> (104) 1\\r\\n\x04\\r\\n (esc) write(9 from 9) -> (95) 4\r\nnone\r\n write(9 from 9) -> (86) 4\r\nHG20\r\n write(9 from 9) -> (77) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) write(9 from 9) -> (68) 4\\r\\n\x00\x00\x00)\\r\\n (esc) write(47 from 47) -> (21) 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02 \x01version02nbchanges1\\r\\n (esc) write(9 from 9) -> (12) 4\\r\\n\x00\x00\x01\xd2\\r\\n (esc) write(12 from 473) -> (0) 1d2\\r\\n\x00\x00\x00\xb2\x96\xee\x1d (esc) write limit reached; closing socket write(27) -> 15\r\nInternal Server Error\r\n $ rm -f error.log Server stops sending in middle of bundle2 payload chunk $ hg serve --config badserver.closeaftersendbytes=1516 -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone requesting all changes adding changesets transaction abort! rollback completed abort: HTTP request error (incomplete response) (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator) [255] $ killdaemons.py $DAEMON_PIDS $ tail -12 error.log write(28 from 28) -> (573) Transfer-Encoding: chunked\r\n write(2 from 2) -> (571) \r\n write(6 from 6) -> (565) 1\\r\\n\x04\\r\\n (esc) write(9 from 9) -> (556) 4\r\nnone\r\n write(9 from 9) -> (547) 4\r\nHG20\r\n write(9 from 9) -> (538) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) write(9 from 9) -> (529) 4\\r\\n\x00\x00\x00)\\r\\n (esc) write(47 from 47) -> (482) 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02 \x01version02nbchanges1\\r\\n (esc) write(9 from 9) -> (473) 4\\r\\n\x00\x00\x01\xd2\\r\\n (esc) write(473 from 473) -> (0) 1d2\\r\\n\x00\x00\x00\xb2\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00>6a3df4de388f3c4f8e28f4f9a814299a3cbb5f50\\ntest\\n0 0\\nfoo\\n\\ninitial\x00\x00\x00\x00\x00\x00\x00\xa1j=\xf4\xde8\x8f<O\x8e(\xf4\xf9\xa8\x14)\x9a<\xbb_P\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00-foo\x00b80de5d138758541c5f05265ad144ab9fa86d1db\\n\x00\x00\x00\x00\x00\x00\x00\x07foo\x00\x00\x00h\xb8\\r\xe5\xd18u\x85A\xc5\xf0Re\xad\x14J\xb9\xfa\x86\xd1\xdb\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\\r\\n (esc) write limit reached; closing socket write(27) -> 15\r\nInternal Server Error\r\n $ rm -f error.log Server stops sending after 0 length payload chunk size $ hg serve --config badserver.closeaftersendbytes=1547 -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files transaction abort! rollback completed abort: HTTP request error (incomplete response; expected 23 bytes got 9) (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator) [255] $ killdaemons.py $DAEMON_PIDS $ tail -13 error.log write(6 from 6) -> (596) 1\\r\\n\x04\\r\\n (esc) write(9 from 9) -> (587) 4\r\nnone\r\n write(9 from 9) -> (578) 4\r\nHG20\r\n write(9 from 9) -> (569) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) write(9 from 9) -> (560) 4\\r\\n\x00\x00\x00)\\r\\n (esc) write(47 from 47) -> (513) 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02 \x01version02nbchanges1\\r\\n (esc) write(9 from 9) -> (504) 4\\r\\n\x00\x00\x01\xd2\\r\\n (esc) write(473 from 473) -> (31) 1d2\\r\\n\x00\x00\x00\xb2\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00>6a3df4de388f3c4f8e28f4f9a814299a3cbb5f50\\ntest\\n0 0\\nfoo\\n\\ninitial\x00\x00\x00\x00\x00\x00\x00\xa1j=\xf4\xde8\x8f<O\x8e(\xf4\xf9\xa8\x14)\x9a<\xbb_P\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00-foo\x00b80de5d138758541c5f05265ad144ab9fa86d1db\\n\x00\x00\x00\x00\x00\x00\x00\x07foo\x00\x00\x00h\xb8\\r\xe5\xd18u\x85A\xc5\xf0Re\xad\x14J\xb9\xfa\x86\xd1\xdb\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\\r\\n (esc) write(9 from 9) -> (22) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) write(9 from 9) -> (13) 4\\r\\n\x00\x00\x00 \\r\\n (esc) write(13 from 38) -> (0) 20\\r\\n\x08LISTKEYS (esc) write limit reached; closing socket write(27) -> 15\r\nInternal Server Error\r\n $ rm -f error.log Server stops sending after 0 part bundle part header (indicating end of bundle2 payload) This is before the 0 size chunked transfer part that signals end of HTTP response. $ hg serve --config badserver.closeaftersendbytes=1722 -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files new changesets 96ee1d7354c4 updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ killdaemons.py $DAEMON_PIDS $ tail -22 error.log write(28 from 28) -> (779) Transfer-Encoding: chunked\r\n write(2 from 2) -> (777) \r\n write(6 from 6) -> (771) 1\\r\\n\x04\\r\\n (esc) write(9 from 9) -> (762) 4\r\nnone\r\n write(9 from 9) -> (753) 4\r\nHG20\r\n write(9 from 9) -> (744) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) write(9 from 9) -> (735) 4\\r\\n\x00\x00\x00)\\r\\n (esc) write(47 from 47) -> (688) 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02 \x01version02nbchanges1\\r\\n (esc) write(9 from 9) -> (679) 4\\r\\n\x00\x00\x01\xd2\\r\\n (esc) write(473 from 473) -> (206) 1d2\\r\\n\x00\x00\x00\xb2\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00>6a3df4de388f3c4f8e28f4f9a814299a3cbb5f50\\ntest\\n0 0\\nfoo\\n\\ninitial\x00\x00\x00\x00\x00\x00\x00\xa1j=\xf4\xde8\x8f<O\x8e(\xf4\xf9\xa8\x14)\x9a<\xbb_P\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00-foo\x00b80de5d138758541c5f05265ad144ab9fa86d1db\\n\x00\x00\x00\x00\x00\x00\x00\x07foo\x00\x00\x00h\xb8\\r\xe5\xd18u\x85A\xc5\xf0Re\xad\x14J\xb9\xfa\x86\xd1\xdb\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\\r\\n (esc) write(9 from 9) -> (197) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) write(9 from 9) -> (188) 4\\r\\n\x00\x00\x00 \\r\\n (esc) write(38 from 38) -> (150) 20\\r\\n\x08LISTKEYS\x00\x00\x00\x01\x01\x00 \x06namespacephases\\r\\n (esc) write(9 from 9) -> (141) 4\\r\\n\x00\x00\x00:\\r\\n (esc) write(64 from 64) -> (77) 3a\r\n96ee1d7354c4ad7372047672c36a1f561e3a6a4c 1\npublishing True\r\n write(9 from 9) -> (68) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) write(9 from 9) -> (59) 4\\r\\n\x00\x00\x00#\\r\\n (esc) write(41 from 41) -> (18) 23\\r\\n\x08LISTKEYS\x00\x00\x00\x02\x01\x00 namespacebookmarks\\r\\n (esc) write(9 from 9) -> (9) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) write(9 from 9) -> (0) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) write limit reached; closing socket write(27) -> 15\r\nInternal Server Error\r\n $ rm -f error.log $ rm -rf clone Server sends a size 0 chunked-transfer size without terminating \r\n $ hg serve --config badserver.closeaftersendbytes=1725 -p $HGPORT -d --pid-file=hg.pid -E error.log $ cat hg.pid > $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ clone requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files new changesets 96ee1d7354c4 updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ killdaemons.py $DAEMON_PIDS $ tail -23 error.log write(28 from 28) -> (782) Transfer-Encoding: chunked\r\n write(2 from 2) -> (780) \r\n write(6 from 6) -> (774) 1\\r\\n\x04\\r\\n (esc) write(9 from 9) -> (765) 4\r\nnone\r\n write(9 from 9) -> (756) 4\r\nHG20\r\n write(9 from 9) -> (747) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) write(9 from 9) -> (738) 4\\r\\n\x00\x00\x00)\\r\\n (esc) write(47 from 47) -> (691) 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02 \x01version02nbchanges1\\r\\n (esc) write(9 from 9) -> (682) 4\\r\\n\x00\x00\x01\xd2\\r\\n (esc) write(473 from 473) -> (209) 1d2\\r\\n\x00\x00\x00\xb2\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00>6a3df4de388f3c4f8e28f4f9a814299a3cbb5f50\\ntest\\n0 0\\nfoo\\n\\ninitial\x00\x00\x00\x00\x00\x00\x00\xa1j=\xf4\xde8\x8f<O\x8e(\xf4\xf9\xa8\x14)\x9a<\xbb_P\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00-foo\x00b80de5d138758541c5f05265ad144ab9fa86d1db\\n\x00\x00\x00\x00\x00\x00\x00\x07foo\x00\x00\x00h\xb8\\r\xe5\xd18u\x85A\xc5\xf0Re\xad\x14J\xb9\xfa\x86\xd1\xdb\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\\r\\n (esc) write(9 from 9) -> (200) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) write(9 from 9) -> (191) 4\\r\\n\x00\x00\x00 \\r\\n (esc) write(38 from 38) -> (153) 20\\r\\n\x08LISTKEYS\x00\x00\x00\x01\x01\x00 \x06namespacephases\\r\\n (esc) write(9 from 9) -> (144) 4\\r\\n\x00\x00\x00:\\r\\n (esc) write(64 from 64) -> (80) 3a\r\n96ee1d7354c4ad7372047672c36a1f561e3a6a4c 1\npublishing True\r\n write(9 from 9) -> (71) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) write(9 from 9) -> (62) 4\\r\\n\x00\x00\x00#\\r\\n (esc) write(41 from 41) -> (21) 23\\r\\n\x08LISTKEYS\x00\x00\x00\x02\x01\x00 namespacebookmarks\\r\\n (esc) write(9 from 9) -> (12) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) write(9 from 9) -> (3) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc) write(3 from 5) -> (0) 0\r\n write limit reached; closing socket write(27) -> 15\r\nInternal Server Error\r\n $ rm -f error.log $ rm -rf clone