match: making visitdir() deal with non-recursive entries
Primarily as an optimization to avoid recursing into directories that will
never have a match inside, this classifies each matcher pattern's root as
recursive or non-recursive (erring on the side of keeping it recursive,
which may lead to wasteful directory or manifest walks that yield no matches).
I measured the performance of "rootfilesin" in two repos:
- The Firefox repo with tree manifests, with
"hg files -r . -I rootfilesin:browser".
The browser directory contains about 3K files across 249 subdirectories.
- A specific Google-internal directory which contains 75K files across 19K
subdirectories, with "hg files -r . -I rootfilesin:REDACTED".
I tested with both cold and warm disk caches. Cold cache was produced by
running "sync; echo 3 > /proc/sys/vm/drop_caches". Warm cache was produced
by re-running the same command a few times.
These were the results:
Cold cache Warm cache
Before After Before After
firefox 0m5.1s 0m2.18s 0m0.22s 0m0.14s
google3 dir 2m3.9s 0m1.57s 0m8.12s 0m0.16s
Certain extensions, notably narrowhg, can depend on this for correctness
(not trying to recurse into directories for which it has no information).
# Copyright 2005, 2006 Benoit Boissinot <benoit.boissinot@ens-lyon.org>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
'''commands to sign and verify changesets'''
from __future__ import absolute_import
import binascii
import os
import tempfile
from mercurial.i18n import _
from mercurial import (
cmdutil,
commands,
error,
match,
node as hgnode,
pycompat,
util,
)
cmdtable = {}
command = cmdutil.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'
class gpg(object):
def __init__(self, path, key=None):
self.path = path
self.key = (key and " --local-user \"%s\"" % key) or ""
def sign(self, data):
gpgcmd = "%s --sign --detach-sign%s" % (self.path, self.key)
return util.filter(data, gpgcmd)
def verify(self, data, sig):
""" returns of the good and bad signatures"""
sigfile = datafile = None
try:
# create temporary files
fd, sigfile = tempfile.mkstemp(prefix="hg-gpg-", suffix=".sig")
fp = os.fdopen(fd, pycompat.sysstr('wb'))
fp.write(sig)
fp.close()
fd, datafile = tempfile.mkstemp(prefix="hg-gpg-", suffix=".txt")
fp = os.fdopen(fd, pycompat.sysstr('wb'))
fp.write(data)
fp.close()
gpgcmd = ("%s --logger-fd 1 --status-fd 1 --verify "
"\"%s\" \"%s\"" % (self.path, sigfile, datafile))
ret = util.filter("", gpgcmd)
finally:
for f in (sigfile, datafile):
try:
if f:
os.unlink(f)
except OSError:
pass
keys = []
key, fingerprint = None, None
for l in ret.splitlines():
# see DETAILS in the gnupg documentation
# filter the logger output
if not l.startswith("[GNUPG:]"):
continue
l = l[9:]
if l.startswith("VALIDSIG"):
# fingerprint of the primary key
fingerprint = l.split()[10]
elif l.startswith("ERRSIG"):
key = l.split(" ", 3)[:2]
key.append("")
fingerprint = None
elif (l.startswith("GOODSIG") or
l.startswith("EXPSIG") or
l.startswith("EXPKEYSIG") or
l.startswith("BADSIG")):
if key is not None:
keys.append(key + [fingerprint])
key = l.split(" ", 2)
fingerprint = None
if key is not None:
keys.append(key + [fingerprint])
return keys
def newgpg(ui, **opts):
"""create a new gpg instance"""
gpgpath = ui.config("gpg", "cmd", "gpg")
gpgkey = opts.get('key')
if not gpgkey:
gpgkey = ui.config("gpg", "key", None)
return gpg(gpgpath, gpgkey)
def sigwalk(repo):
"""
walk over every sigs, yields a couple
((node, version, sig), (filename, linenumber))
"""
def parsefile(fileiter, context):
ln = 1
for l in fileiter:
if not l:
continue
yield (l.split(" ", 2), (context, ln))
ln += 1
# read the heads
fl = repo.file(".hgsigs")
for r in reversed(fl.heads()):
fn = ".hgsigs|%s" % hgnode.short(r)
for item in parsefile(fl.read(r).splitlines(), fn):
yield item
try:
# read local signatures
fn = "localsigs"
for item in parsefile(repo.vfs(fn), fn):
yield item
except IOError:
pass
def getkeys(ui, repo, mygpg, sigdata, context):
"""get the keys who signed a data"""
fn, ln = context
node, version, sig = sigdata
prefix = "%s:%d" % (fn, ln)
node = hgnode.bin(node)
data = node2txt(repo, node, version)
sig = binascii.a2b_base64(sig)
keys = mygpg.verify(data, sig)
validkeys = []
# warn for expired key and/or sigs
for key in keys:
if key[0] == "ERRSIG":
ui.write(_("%s Unknown key ID \"%s\"\n")
% (prefix, shortkey(ui, key[1][:15])))
continue
if key[0] == "BADSIG":
ui.write(_("%s Bad signature from \"%s\"\n") % (prefix, key[2]))
continue
if key[0] == "EXPSIG":
ui.write(_("%s Note: Signature has expired"
" (signed by: \"%s\")\n") % (prefix, key[2]))
elif key[0] == "EXPKEYSIG":
ui.write(_("%s Note: This key has expired"
" (signed by: \"%s\")\n") % (prefix, key[2]))
validkeys.append((key[1], key[2], key[3]))
return validkeys
@command("sigs", [], _('hg sigs'))
def sigs(ui, repo):
"""list signed changesets"""
mygpg = newgpg(ui)
revs = {}
for data, context in sigwalk(repo):
node, version, sig = data
fn, ln = context
try:
n = repo.lookup(node)
except KeyError:
ui.warn(_("%s:%d node does not exist\n") % (fn, ln))
continue
r = repo.changelog.rev(n)
keys = getkeys(ui, repo, mygpg, data, context)
if not keys:
continue
revs.setdefault(r, [])
revs[r].extend(keys)
for rev in sorted(revs, reverse=True):
for k in revs[rev]:
r = "%5d:%s" % (rev, hgnode.hex(repo.changelog.node(rev)))
ui.write("%-30s %s\n" % (keystr(ui, k), r))
@command("sigcheck", [], _('hg sigcheck REV'))
def sigcheck(ui, repo, rev):
"""verify all the signatures there may be for a particular revision"""
mygpg = newgpg(ui)
rev = repo.lookup(rev)
hexrev = hgnode.hex(rev)
keys = []
for data, context in sigwalk(repo):
node, version, sig = data
if node == hexrev:
k = getkeys(ui, repo, mygpg, data, context)
if k:
keys.extend(k)
if not keys:
ui.write(_("no valid signature for %s\n") % hgnode.short(rev))
return
# print summary
ui.write(_("%s is signed by:\n") % hgnode.short(rev))
for key in keys:
ui.write(" %s\n" % keystr(ui, key))
def keystr(ui, key):
"""associate a string to a key (username, comment)"""
keyid, user, fingerprint = key
comment = ui.config("gpg", fingerprint, None)
if comment:
return "%s (%s)" % (user, comment)
else:
return user
@command("sign",
[('l', 'local', None, _('make the signature local')),
('f', 'force', None, _('sign even if the sigfile is modified')),
('', 'no-commit', None, _('do not commit the sigfile after signing')),
('k', 'key', '',
_('the key id to sign with'), _('ID')),
('m', 'message', '',
_('use text as commit message'), _('TEXT')),
('e', 'edit', False, _('invoke editor on commit messages')),
] + commands.commitopts2,
_('hg sign [OPTION]... [REV]...'))
def sign(ui, repo, *revs, **opts):
"""add a signature for the current or given revision
If no revision is given, the parent of the working directory is used,
or tip if no revision is checked out.
The ``gpg.cmd`` config setting can be used to specify the command
to run. A default key can be specified with ``gpg.key``.
See :hg:`help dates` for a list of formats valid for -d/--date.
"""
with repo.wlock():
return _dosign(ui, repo, *revs, **opts)
def _dosign(ui, repo, *revs, **opts):
mygpg = newgpg(ui, **opts)
sigver = "0"
sigmessage = ""
date = opts.get('date')
if date:
opts['date'] = util.parsedate(date)
if revs:
nodes = [repo.lookup(n) for n in revs]
else:
nodes = [node for node in repo.dirstate.parents()
if node != hgnode.nullid]
if len(nodes) > 1:
raise error.Abort(_('uncommitted merge - please provide a '
'specific revision'))
if not nodes:
nodes = [repo.changelog.tip()]
for n in nodes:
hexnode = hgnode.hex(n)
ui.write(_("signing %d:%s\n") % (repo.changelog.rev(n),
hgnode.short(n)))
# build data
data = node2txt(repo, n, sigver)
sig = mygpg.sign(data)
if not sig:
raise error.Abort(_("error while signing"))
sig = binascii.b2a_base64(sig)
sig = sig.replace("\n", "")
sigmessage += "%s %s %s\n" % (hexnode, sigver, sig)
# write it
if opts['local']:
repo.vfs.append("localsigs", sigmessage)
return
if not opts["force"]:
msigs = match.exact(repo.root, '', ['.hgsigs'])
if any(repo.status(match=msigs, unknown=True, ignored=True)):
raise error.Abort(_("working copy of .hgsigs is changed "),
hint=_("please commit .hgsigs manually"))
sigsfile = repo.wfile(".hgsigs", "ab")
sigsfile.write(sigmessage)
sigsfile.close()
if '.hgsigs' not in repo.dirstate:
repo[None].add([".hgsigs"])
if opts["no_commit"]:
return
message = opts['message']
if not message:
# we don't translate commit messages
message = "\n".join(["Added signature for changeset %s"
% hgnode.short(n)
for n in nodes])
try:
editor = cmdutil.getcommiteditor(editform='gpg.sign', **opts)
repo.commit(message, opts['user'], opts['date'], match=msigs,
editor=editor)
except ValueError as inst:
raise error.Abort(str(inst))
def shortkey(ui, key):
if len(key) != 16:
ui.debug("key ID \"%s\" format error\n" % key)
return key
return key[-8:]
def node2txt(repo, node, ver):
"""map a manifest into some text"""
if ver == "0":
return "%s\n" % hgnode.hex(node)
else:
raise error.Abort(_("unknown signature version"))