tests/test-bundle-type.t

match: making visitdir() deal with non-recursive entries

Primarily as an optimization to avoid recursing into directories that will
never have a match inside, this classifies each matcher pattern's root as
recursive or non-recursive (erring on the side of keeping it recursive,
which may lead to wasteful directory or manifest walks that yield no matches).

I measured the performance of "rootfilesin" in two repos:
- The Firefox repo with tree manifests, with
  "hg files -r . -I rootfilesin:browser".
  The browser directory contains about 3K files across 249 subdirectories.
- A specific Google-internal directory which contains 75K files across 19K
  subdirectories, with "hg files -r . -I rootfilesin:REDACTED".

I tested with both cold and warm disk caches. Cold cache was produced by
running "sync; echo 3 > /proc/sys/vm/drop_caches". Warm cache was produced
by re-running the same command a few times.

These were the results:

               Cold cache           Warm cache
             Before   After      Before   After
firefox      0m5.1s   0m2.18s   0m0.22s  0m0.14s
google3 dir  2m3.9s   0m1.57s   0m8.12s  0m0.16s

Certain extensions, notably narrowhg, can depend on this for correctness
(not trying to recurse into directories for which it has no information).

  $ cat << EOF >> $HGRCPATH
  > [format]
  > usegeneraldelta=yes
  > EOF

bundle w/o type option

  $ hg init t1
  $ hg init t2
  $ cd t1
  $ echo blablablablabla > file.txt
  $ hg ci -Ama
  adding file.txt
  $ hg log | grep summary
  summary:     a
  $ hg bundle ../b1 ../t2
  searching for changes
  1 changesets found

  $ cd ../t2
  $ hg pull ../b1
  pulling from ../b1
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  (run 'hg update' to get a working copy)
  $ hg up
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg log | grep summary
  summary:     a
  $ cd ..

test bundle types

  $ testbundle() {
  >   echo % test bundle type $1
  >   hg init t$1
  >   cd t1
  >   hg bundle -t $1 ../b$1 ../t$1
  >   f -q -B6 -D ../b$1; echo
  >   cd ../t$1
  >   hg debugbundle ../b$1
  >   hg debugbundle --spec ../b$1
  >   echo
  >   cd ..
  > }

  $ for t in "None" "bzip2" "gzip" "none-v2" "v2" "v1" "gzip-v1"; do
  >   testbundle $t
  > done
  % test bundle type None
  searching for changes
  1 changesets found
  HG20\x00\x00 (esc)
  Stream params: {}
  changegroup -- "sortdict([('version', '02'), ('nbchanges', '1')])"
      c35a0f9217e65d1fdb90c936ffa7dbe679f83ddf
  none-v2
  
  % test bundle type bzip2
  searching for changes
  1 changesets found
  HG20\x00\x00 (esc)
  Stream params: sortdict([('Compression', 'BZ')])
  changegroup -- "sortdict([('version', '02'), ('nbchanges', '1')])"
      c35a0f9217e65d1fdb90c936ffa7dbe679f83ddf
  bzip2-v2
  
  % test bundle type gzip
  searching for changes
  1 changesets found
  HG20\x00\x00 (esc)
  Stream params: sortdict([('Compression', 'GZ')])
  changegroup -- "sortdict([('version', '02'), ('nbchanges', '1')])"
      c35a0f9217e65d1fdb90c936ffa7dbe679f83ddf
  gzip-v2
  
  % test bundle type none-v2
  searching for changes
  1 changesets found
  HG20\x00\x00 (esc)
  Stream params: {}
  changegroup -- "sortdict([('version', '02'), ('nbchanges', '1')])"
      c35a0f9217e65d1fdb90c936ffa7dbe679f83ddf
  none-v2
  
  % test bundle type v2
  searching for changes
  1 changesets found
  HG20\x00\x00 (esc)
  Stream params: sortdict([('Compression', 'BZ')])
  changegroup -- "sortdict([('version', '02'), ('nbchanges', '1')])"
      c35a0f9217e65d1fdb90c936ffa7dbe679f83ddf
  bzip2-v2
  
  % test bundle type v1
  searching for changes
  1 changesets found
  HG10BZ
  c35a0f9217e65d1fdb90c936ffa7dbe679f83ddf
  bzip2-v1
  
  % test bundle type gzip-v1
  searching for changes
  1 changesets found
  HG10GZ
  c35a0f9217e65d1fdb90c936ffa7dbe679f83ddf
  gzip-v1
  

Compression level can be adjusted for bundle2 bundles

  $ hg init test-complevel
  $ cd test-complevel

  $ cat > file0 << EOF
  > this is a file
  > with some text
  > and some more text
  > and other content
  > EOF
  $ cat > file1 << EOF
  > this is another file
  > with some other content
  > and repeated, repeated, repeated, repeated content
  > EOF
  $ hg -q commit -A -m initial

  $ hg bundle -a -t gzip-v2 gzip-v2.hg
  1 changesets found
  $ f --size gzip-v2.hg
  gzip-v2.hg: size=427

  $ hg --config experimental.bundlecomplevel=1 bundle -a -t gzip-v2 gzip-v2-level1.hg
  1 changesets found
  $ f --size gzip-v2-level1.hg
  gzip-v2-level1.hg: size=435

  $ cd ..

#if zstd

  $ for t in "zstd" "zstd-v2"; do
  >   testbundle $t
  > done
  % test bundle type zstd
  searching for changes
  1 changesets found
  HG20\x00\x00 (esc)
  Stream params: sortdict([('Compression', 'ZS')])
  changegroup -- "sortdict([('version', '02'), ('nbchanges', '1')])"
      c35a0f9217e65d1fdb90c936ffa7dbe679f83ddf
  zstd-v2
  
  % test bundle type zstd-v2
  searching for changes
  1 changesets found
  HG20\x00\x00 (esc)
  Stream params: sortdict([('Compression', 'ZS')])
  changegroup -- "sortdict([('version', '02'), ('nbchanges', '1')])"
      c35a0f9217e65d1fdb90c936ffa7dbe679f83ddf
  zstd-v2
  
#else

zstd is a valid engine but isn't available

  $ hg -R t1 bundle -a -t zstd irrelevant.hg
  abort: compression engine zstd could not be loaded
  [255]

#endif

test garbage file

  $ echo garbage > bgarbage
  $ hg init tgarbage
  $ cd tgarbage
  $ hg pull ../bgarbage
  pulling from ../bgarbage
  abort: ../bgarbage: not a Mercurial bundle
  [255]
  $ cd ..

test invalid bundle type

  $ cd t1
  $ hg bundle -a -t garbage ../bgarbage
  abort: garbage is not a recognized bundle specification
  (see 'hg help bundle' for supported values for --type)
  [255]
  $ cd ..