match: making visitdir() deal with non-recursive entries
Primarily as an optimization to avoid recursing into directories that will
never have a match inside, this classifies each matcher pattern's root as
recursive or non-recursive (erring on the side of keeping it recursive,
which may lead to wasteful directory or manifest walks that yield no matches).
I measured the performance of "rootfilesin" in two repos:
- The Firefox repo with tree manifests, with
"hg files -r . -I rootfilesin:browser".
The browser directory contains about 3K files across 249 subdirectories.
- A specific Google-internal directory which contains 75K files across 19K
subdirectories, with "hg files -r . -I rootfilesin:REDACTED".
I tested with both cold and warm disk caches. Cold cache was produced by
running "sync; echo 3 > /proc/sys/vm/drop_caches". Warm cache was produced
by re-running the same command a few times.
These were the results:
Cold cache Warm cache
Before After Before After
firefox 0m5.1s 0m2.18s 0m0.22s 0m0.14s
google3 dir 2m3.9s 0m1.57s 0m8.12s 0m0.16s
Certain extensions, notably narrowhg, can depend on this for correctness
(not trying to recurse into directories for which it has no information).
#require serve
$ echo "[extensions]" >> $HGRCPATH
$ echo "fetch=" >> $HGRCPATH
test fetch with default branches only
$ hg init a
$ echo a > a/a
$ hg --cwd a commit -Ama
adding a
$ hg clone a b
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg clone a c
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo b > a/b
$ hg --cwd a commit -Amb
adding b
$ hg --cwd a parents -q
1:d2ae7f538514
should pull one change
$ hg --cwd b fetch ../a
pulling from ../a
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg --cwd b parents -q
1:d2ae7f538514
$ echo c > c/c
$ hg --cwd c commit -Amc
adding c
$ hg clone c d
updating to branch default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg clone c e
updating to branch default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
We cannot use the default commit message if fetching from a local
repo, because the path of the repo will be included in the commit
message, making every commit appear different.
should merge c into a
$ hg --cwd c fetch -d '0 0' -m 'automated merge' ../a
pulling from ../a
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
updating to 2:d2ae7f538514
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
merging with 1:d36c0562f908
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
new changeset 3:a323a0c43ec4 merges remote changes with local
$ ls c
a
b
c
$ hg serve --cwd a -a localhost -p $HGPORT -d --pid-file=hg.pid
$ cat a/hg.pid >> "$DAEMON_PIDS"
fetch over http, no auth
(this also tests that editor is invoked if '--edit' is specified)
$ HGEDITOR=cat hg --cwd d fetch --edit http://localhost:$HGPORT/
pulling from http://localhost:$HGPORT/
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
updating to 2:d2ae7f538514
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
merging with 1:d36c0562f908
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
Automated merge with http://localhost:$HGPORT/
HG: Enter commit message. Lines beginning with 'HG:' are removed.
HG: Leave message empty to abort commit.
HG: --
HG: user: test
HG: branch merge
HG: branch 'default'
HG: changed c
new changeset 3:* merges remote changes with local (glob)
$ hg --cwd d tip --template '{desc}\n'
Automated merge with http://localhost:$HGPORT/
$ hg --cwd d status --rev 'tip^1' --rev tip
A c
$ hg --cwd d status --rev 'tip^2' --rev tip
A b
fetch over http with auth (should be hidden in desc)
(this also tests that editor is not invoked if '--edit' is not
specified, even though commit message is not specified explicitly)
$ HGEDITOR=cat hg --cwd e fetch http://user:password@localhost:$HGPORT/
pulling from http://user:***@localhost:$HGPORT/
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
updating to 2:d2ae7f538514
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
merging with 1:d36c0562f908
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
new changeset 3:* merges remote changes with local (glob)
$ hg --cwd e tip --template '{desc}\n'
Automated merge with http://localhost:$HGPORT/
$ hg clone a f
updating to branch default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg clone a g
updating to branch default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo f > f/f
$ hg --cwd f ci -Amf
adding f
$ echo g > g/g
$ hg --cwd g ci -Amg
adding g
$ hg clone -q f h
$ hg clone -q g i
should merge f into g
$ hg --cwd g fetch -d '0 0' --switch -m 'automated merge' ../f
pulling from ../f
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
merging with 3:6343ca3eff20
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
new changeset 4:f7faa0b7d3c6 merges remote changes with local
$ rm i/g
should abort, because i is modified
$ hg --cwd i fetch ../h
abort: uncommitted changes
[255]
test fetch with named branches
$ hg init nbase
$ echo base > nbase/a
$ hg -R nbase ci -Am base
adding a
$ hg -R nbase branch a
marked working directory as branch a
(branches are permanent and global, did you want a bookmark?)
$ echo a > nbase/a
$ hg -R nbase ci -m a
$ hg -R nbase up -C 0
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg -R nbase branch b
marked working directory as branch b
$ echo b > nbase/b
$ hg -R nbase ci -Am b
adding b
pull in change on foreign branch
$ hg clone nbase n1
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg clone nbase n2
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg -R n1 up -C a
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo aa > n1/a
$ hg -R n1 ci -m a1
$ hg -R n2 up -C b
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg -R n2 fetch -m 'merge' n1
pulling from n1
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
parent should be 2 (no automatic update)
$ hg -R n2 parents --template '{rev}\n'
2
$ rm -fr n1 n2
pull in changes on both foreign and local branches
$ hg clone nbase n1
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg clone nbase n2
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg -R n1 up -C a
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo aa > n1/a
$ hg -R n1 ci -m a1
$ hg -R n1 up -C b
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo bb > n1/b
$ hg -R n1 ci -m b1
$ hg -R n2 up -C b
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg -R n2 fetch -m 'merge' n1
pulling from n1
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
parent should be 4 (fast forward)
$ hg -R n2 parents --template '{rev}\n'
4
$ rm -fr n1 n2
pull changes on foreign (2 new heads) and local (1 new head) branches
with a local change
$ hg clone nbase n1
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg clone nbase n2
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg -R n1 up -C a
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a1 > n1/a
$ hg -R n1 ci -m a1
$ hg -R n1 up -C b
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo bb > n1/b
$ hg -R n1 ci -m b1
$ hg -R n1 up -C 1
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo a2 > n1/a
$ hg -R n1 ci -m a2
created new head
$ hg -R n2 up -C b
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo change >> n2/c
$ hg -R n2 ci -A -m local
adding c
$ hg -R n2 fetch -d '0 0' -m 'merge' n1
pulling from n1
searching for changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 3 changes to 2 files (+2 heads)
updating to 5:3c4a837a864f
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
merging with 3:1267f84a9ea5
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
new changeset 7:2cf2a1261f21 merges remote changes with local
parent should be 7 (new merge changeset)
$ hg -R n2 parents --template '{rev}\n'
7
$ rm -fr n1 n2
pull in changes on foreign (merge of local branch) and local (2 new
heads) with a local change
$ hg clone nbase n1
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg clone nbase n2
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg -R n1 up -C a
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg -R n1 merge b
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg -R n1 ci -m merge
$ hg -R n1 up -C 2
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo c > n1/a
$ hg -R n1 ci -m c
$ hg -R n1 up -C 2
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo cc > n1/a
$ hg -R n1 ci -m cc
created new head
$ hg -R n2 up -C b
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo change >> n2/b
$ hg -R n2 ci -A -m local
$ hg -R n2 fetch -m 'merge' n1
pulling from n1
searching for changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 2 changes to 1 files (+2 heads)
not merging with 1 other new branch heads (use "hg heads ." and "hg merge" to merge them)
[1]
parent should be 3 (fetch did not merge anything)
$ hg -R n2 parents --template '{rev}\n'
3
$ rm -fr n1 n2
pull in change on different branch than dirstate
$ hg init n1
$ echo a > n1/a
$ hg -R n1 ci -Am initial
adding a
$ hg clone n1 n2
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo b > n1/a
$ hg -R n1 ci -m next
$ hg -R n2 branch topic
marked working directory as branch topic
(branches are permanent and global, did you want a bookmark?)
$ hg -R n2 fetch -m merge n1
abort: working directory not at branch tip
(use 'hg update' to check out branch tip)
[255]
parent should be 0 (fetch did not update or merge anything)
$ hg -R n2 parents --template '{rev}\n'
0
$ rm -fr n1 n2
test fetch with inactive branches
$ hg init ib1
$ echo a > ib1/a
$ hg --cwd ib1 ci -Am base
adding a
$ hg --cwd ib1 branch second
marked working directory as branch second
(branches are permanent and global, did you want a bookmark?)
$ echo b > ib1/b
$ hg --cwd ib1 ci -Am onsecond
adding b
$ hg --cwd ib1 branch -f default
marked working directory as branch default
$ echo c > ib1/c
$ hg --cwd ib1 ci -Am newdefault
adding c
created new head
$ hg clone ib1 ib2
updating to branch default
3 files updated, 0 files merged, 0 files removed, 0 files unresolved
fetch should succeed
$ hg --cwd ib2 fetch ../ib1
pulling from ../ib1
searching for changes
no changes found
$ rm -fr ib1 ib2
test issue1726
$ hg init i1726r1
$ echo a > i1726r1/a
$ hg --cwd i1726r1 ci -Am base
adding a
$ hg clone i1726r1 i1726r2
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo b > i1726r1/a
$ hg --cwd i1726r1 ci -m second
$ echo c > i1726r2/a
$ hg --cwd i1726r2 ci -m third
$ HGMERGE=true hg --cwd i1726r2 fetch ../i1726r1
pulling from ../i1726r1
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
updating to 2:7837755a2789
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
merging with 1:d1f0c6c48ebd
merging a
0 files updated, 1 files merged, 0 files removed, 0 files unresolved
new changeset 3:* merges remote changes with local (glob)
$ hg --cwd i1726r2 heads default --template '{rev}\n'
3
test issue2047
$ hg -q init i2047a
$ cd i2047a
$ echo a > a
$ hg -q ci -Am a
$ hg -q branch stable
$ echo b > b
$ hg -q ci -Am b
$ cd ..
$ hg -q clone -r 0 i2047a i2047b
$ cd i2047b
$ hg fetch ../i2047a
pulling from ../i2047a
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
$ cd ..