match: making visitdir() deal with non-recursive entries
Primarily as an optimization to avoid recursing into directories that will
never have a match inside, this classifies each matcher pattern's root as
recursive or non-recursive (erring on the side of keeping it recursive,
which may lead to wasteful directory or manifest walks that yield no matches).
I measured the performance of "rootfilesin" in two repos:
- The Firefox repo with tree manifests, with
"hg files -r . -I rootfilesin:browser".
The browser directory contains about 3K files across 249 subdirectories.
- A specific Google-internal directory which contains 75K files across 19K
subdirectories, with "hg files -r . -I rootfilesin:REDACTED".
I tested with both cold and warm disk caches. Cold cache was produced by
running "sync; echo 3 > /proc/sys/vm/drop_caches". Warm cache was produced
by re-running the same command a few times.
These were the results:
Cold cache Warm cache
Before After Before After
firefox 0m5.1s 0m2.18s 0m0.22s 0m0.14s
google3 dir 2m3.9s 0m1.57s 0m8.12s 0m0.16s
Certain extensions, notably narrowhg, can depend on this for correctness
(not trying to recurse into directories for which it has no information).
$ USERCACHE="$TESTTMP/cache"; export USERCACHE
$ mkdir "${USERCACHE}"
$ cat >> $HGRCPATH <<EOF
> [format]
> usegeneraldelta=yes
> [extensions]
> largefiles =
> share =
> strip =
> convert =
> [largefiles]
> minsize = 0.5
> patterns = **.other
> **.dat
> usercache=${USERCACHE}
> EOF
"lfconvert" works
$ hg init bigfile-repo
$ cd bigfile-repo
$ cat >> .hg/hgrc <<EOF
> [extensions]
> largefiles = !
> EOF
$ mkdir sub
$ dd if=/dev/zero bs=1k count=256 > large 2> /dev/null
$ dd if=/dev/zero bs=1k count=256 > large2 2> /dev/null
$ echo normal > normal1
$ echo alsonormal > sub/normal2
$ dd if=/dev/zero bs=1k count=10 > sub/maybelarge.dat 2> /dev/null
$ hg addremove
adding large
adding large2
adding normal1
adding sub/maybelarge.dat
adding sub/normal2
$ hg commit -m"add large, normal1" large normal1
$ hg commit -m"add sub/*" sub
Test tag parsing
$ cat >> .hgtags <<EOF
> IncorrectlyFormattedTag!
> invalidhash sometag
> 0123456789abcdef anothertag
> EOF
$ hg add .hgtags
$ hg commit -m"add large2" large2 .hgtags
Test link+rename largefile codepath
$ [ -d .hg/largefiles ] && echo fail || echo pass
pass
$ cd ..
$ hg lfconvert --size 0.2 bigfile-repo largefiles-repo
initializing destination largefiles-repo
skipping incorrectly formatted tag IncorrectlyFormattedTag!
skipping incorrectly formatted id invalidhash
no mapping for id 0123456789abcdef
#if symlink
$ hg --cwd bigfile-repo rename large2 large3
$ ln -sf large bigfile-repo/large3
$ hg --cwd bigfile-repo commit -m"make large2 a symlink" large2 large3
$ hg lfconvert --size 0.2 bigfile-repo largefiles-repo-symlink
initializing destination largefiles-repo-symlink
skipping incorrectly formatted tag IncorrectlyFormattedTag!
skipping incorrectly formatted id invalidhash
no mapping for id 0123456789abcdef
abort: renamed/copied largefile large3 becomes symlink
[255]
#endif
$ cd bigfile-repo
$ hg strip --no-backup 2
0 files updated, 0 files merged, 2 files removed, 0 files unresolved
$ cd ..
$ rm -rf largefiles-repo largefiles-repo-symlink
$ hg lfconvert --size 0.2 bigfile-repo largefiles-repo
initializing destination largefiles-repo
"lfconvert" converts content correctly
$ cd largefiles-repo
$ hg up
getting changed largefiles
2 largefiles updated, 0 removed
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg locate
.hglf/large
.hglf/sub/maybelarge.dat
normal1
sub/normal2
$ cat normal1
normal
$ cat sub/normal2
alsonormal
$ md5sum.py large sub/maybelarge.dat
ec87a838931d4d5d2e94a04644788a55 large
1276481102f218c981e0324180bafd9f sub/maybelarge.dat
"lfconvert" adds 'largefiles' to .hg/requires.
$ cat .hg/requires
dotencode
fncache
generaldelta
largefiles
revlogv1
store
"lfconvert" includes a newline at the end of the standin files.
$ cat .hglf/large .hglf/sub/maybelarge.dat
2e000fa7e85759c7f4c254d4d9c33ef481e459a7
34e163be8e43c5631d8b92e9c43ab0bf0fa62b9c
$ cd ..
add some changesets to rename/remove/merge
$ cd bigfile-repo
$ hg mv -q sub stuff
$ hg commit -m"rename sub/ to stuff/"
$ hg update -q 1
$ echo blah >> normal3
$ echo blah >> sub/normal2
$ echo blah >> sub/maybelarge.dat
$ md5sum.py sub/maybelarge.dat
1dd0b99ff80e19cff409702a1d3f5e15 sub/maybelarge.dat
$ hg commit -A -m"add normal3, modify sub/*"
adding normal3
created new head
$ hg rm large normal3
$ hg commit -q -m"remove large, normal3"
$ hg merge
merging sub/maybelarge.dat and stuff/maybelarge.dat to stuff/maybelarge.dat
merging sub/normal2 and stuff/normal2 to stuff/normal2
warning: $TESTTMP/bigfile-repo/stuff/maybelarge.dat looks like a binary file. (glob)
warning: conflicts while merging stuff/maybelarge.dat! (edit, then use 'hg resolve --mark')
0 files updated, 1 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
[1]
$ hg cat -r . sub/maybelarge.dat > stuff/maybelarge.dat
$ hg resolve -m stuff/maybelarge.dat
(no more unresolved files)
$ hg commit -m"merge"
$ hg log -G --template "{rev}:{node|short} {desc|firstline}\n"
@ 5:4884f215abda merge
|\
| o 4:7285f817b77e remove large, normal3
| |
| o 3:67e3892e3534 add normal3, modify sub/*
| |
o | 2:c96c8beb5d56 rename sub/ to stuff/
|/
o 1:020c65d24e11 add sub/*
|
o 0:117b8328f97a add large, normal1
$ cd ..
lfconvert with rename, merge, and remove
$ rm -rf largefiles-repo
$ hg lfconvert --size 0.2 bigfile-repo largefiles-repo
initializing destination largefiles-repo
$ cd largefiles-repo
$ hg log -G --template "{rev}:{node|short} {desc|firstline}\n"
o 5:8e05f5f2b77e merge
|\
| o 4:a5a02de7a8e4 remove large, normal3
| |
| o 3:55759520c76f add normal3, modify sub/*
| |
o | 2:261ad3f3f037 rename sub/ to stuff/
|/
o 1:334e5237836d add sub/*
|
o 0:d4892ec57ce2 add large, normal1
$ hg locate -r 2
.hglf/large
.hglf/stuff/maybelarge.dat
normal1
stuff/normal2
$ hg locate -r 3
.hglf/large
.hglf/sub/maybelarge.dat
normal1
normal3
sub/normal2
$ hg locate -r 4
.hglf/sub/maybelarge.dat
normal1
sub/normal2
$ hg locate -r 5
.hglf/stuff/maybelarge.dat
normal1
stuff/normal2
$ hg update
getting changed largefiles
1 largefiles updated, 0 removed
3 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cat stuff/normal2
alsonormal
blah
$ md5sum.py stuff/maybelarge.dat
1dd0b99ff80e19cff409702a1d3f5e15 stuff/maybelarge.dat
$ cat .hglf/stuff/maybelarge.dat
76236b6a2c6102826c61af4297dd738fb3b1de38
$ cd ..
"lfconvert" error cases
$ hg lfconvert http://localhost/foo foo
abort: http://localhost/foo is not a local Mercurial repo
[255]
$ hg lfconvert foo ssh://localhost/foo
abort: ssh://localhost/foo is not a local Mercurial repo
[255]
$ hg lfconvert nosuchrepo foo
abort: repository nosuchrepo not found!
[255]
$ hg share -q -U bigfile-repo shared
$ printf 'bogus' > shared/.hg/sharedpath
$ hg lfconvert shared foo
abort: .hg/sharedpath points to nonexistent directory $TESTTMP/bogus! (glob)
[255]
$ hg lfconvert bigfile-repo largefiles-repo
initializing destination largefiles-repo
abort: repository largefiles-repo already exists!
[255]
add another largefile to the new largefiles repo
$ cd largefiles-repo
$ dd if=/dev/zero bs=1k count=1k > anotherlarge 2> /dev/null
$ hg add --lfsize=1 anotherlarge
$ hg commit -m "add anotherlarge (should be a largefile)"
$ cat .hglf/anotherlarge
3b71f43ff30f4b15b5cd85dd9e95ebc7e84eb5a3
$ hg tag mytag
$ cd ..
round-trip: converting back to a normal (non-largefiles) repo with
"lfconvert --to-normal" should give the same as ../bigfile-repo
$ cd largefiles-repo
$ hg lfconvert --to-normal . ../normal-repo
initializing destination ../normal-repo
0 additional largefiles cached
scanning source...
sorting...
converting...
7 add large, normal1
6 add sub/*
5 rename sub/ to stuff/
4 add normal3, modify sub/*
3 remove large, normal3
2 merge
1 add anotherlarge (should be a largefile)
0 Added tag mytag for changeset abacddda7028
$ cd ../normal-repo
$ cat >> .hg/hgrc <<EOF
> [extensions]
> largefiles = !
> EOF
$ hg log -G --template "{rev}:{node|short} {desc|firstline}\n"
o 7:b5fedc110b9d Added tag mytag for changeset 867ab992ecf4
|
o 6:867ab992ecf4 add anotherlarge (should be a largefile)
|
o 5:4884f215abda merge
|\
| o 4:7285f817b77e remove large, normal3
| |
| o 3:67e3892e3534 add normal3, modify sub/*
| |
o | 2:c96c8beb5d56 rename sub/ to stuff/
|/
o 1:020c65d24e11 add sub/*
|
o 0:117b8328f97a add large, normal1
$ hg update
5 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg locate
.hgtags
anotherlarge
normal1
stuff/maybelarge.dat
stuff/normal2
$ [ -d .hg/largefiles ] && echo fail || echo pass
pass
$ cd ..
Clearing the usercache ensures that commitctx doesn't try to cache largefiles
from the working dir on a convert.
$ rm "${USERCACHE}"/*
$ hg convert largefiles-repo
assuming destination largefiles-repo-hg
initializing destination largefiles-repo-hg repository
scanning source...
sorting...
converting...
7 add large, normal1
6 add sub/*
5 rename sub/ to stuff/
4 add normal3, modify sub/*
3 remove large, normal3
2 merge
1 add anotherlarge (should be a largefile)
0 Added tag mytag for changeset abacddda7028
$ hg -R largefiles-repo-hg log -G --template "{rev}:{node|short} {desc|firstline}\n"
o 7:2f08f66459b7 Added tag mytag for changeset 17126745edfd
|
o 6:17126745edfd add anotherlarge (should be a largefile)
|
o 5:9cc5aa7204f0 merge
|\
| o 4:a5a02de7a8e4 remove large, normal3
| |
| o 3:55759520c76f add normal3, modify sub/*
| |
o | 2:261ad3f3f037 rename sub/ to stuff/
|/
o 1:334e5237836d add sub/*
|
o 0:d4892ec57ce2 add large, normal1
Verify will fail (for now) if the usercache is purged before converting, since
largefiles are not cached in the converted repo's local store by the conversion
process.
$ cd largefiles-repo-hg
$ cat >> .hg/hgrc <<EOF
> [experimental]
> evolution=createmarkers
> EOF
$ hg debugobsolete `hg log -r tip -T "{node}"`
$ cd ..
$ hg -R largefiles-repo-hg verify --large --lfa
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
9 files, 8 changesets, 13 total revisions
searching 7 changesets for largefiles
changeset 0:d4892ec57ce2: large references missing $TESTTMP/largefiles-repo-hg/.hg/largefiles/2e000fa7e85759c7f4c254d4d9c33ef481e459a7 (glob)
changeset 1:334e5237836d: sub/maybelarge.dat references missing $TESTTMP/largefiles-repo-hg/.hg/largefiles/34e163be8e43c5631d8b92e9c43ab0bf0fa62b9c (glob)
changeset 2:261ad3f3f037: stuff/maybelarge.dat references missing $TESTTMP/largefiles-repo-hg/.hg/largefiles/34e163be8e43c5631d8b92e9c43ab0bf0fa62b9c (glob)
changeset 3:55759520c76f: sub/maybelarge.dat references missing $TESTTMP/largefiles-repo-hg/.hg/largefiles/76236b6a2c6102826c61af4297dd738fb3b1de38 (glob)
changeset 5:9cc5aa7204f0: stuff/maybelarge.dat references missing $TESTTMP/largefiles-repo-hg/.hg/largefiles/76236b6a2c6102826c61af4297dd738fb3b1de38 (glob)
changeset 6:17126745edfd: anotherlarge references missing $TESTTMP/largefiles-repo-hg/.hg/largefiles/3b71f43ff30f4b15b5cd85dd9e95ebc7e84eb5a3 (glob)
verified existence of 6 revisions of 4 largefiles
[1]
$ hg -R largefiles-repo-hg showconfig paths
[1]
Avoid a traceback if a largefile isn't available (issue3519)
Ensure the largefile can be cached in the source if necessary
$ hg clone -U largefiles-repo issue3519
$ rm -f "${USERCACHE}"/*
$ hg lfconvert --to-normal issue3519 normalized3519
initializing destination normalized3519
4 additional largefiles cached
scanning source...
sorting...
converting...
7 add large, normal1
6 add sub/*
5 rename sub/ to stuff/
4 add normal3, modify sub/*
3 remove large, normal3
2 merge
1 add anotherlarge (should be a largefile)
0 Added tag mytag for changeset abacddda7028
Ensure the abort message is useful if a largefile is entirely unavailable
$ rm -rf normalized3519
$ rm "${USERCACHE}"/*
$ rm issue3519/.hg/largefiles/*
$ rm largefiles-repo/.hg/largefiles/*
$ hg lfconvert --to-normal issue3519 normalized3519
initializing destination normalized3519
anotherlarge: largefile 3b71f43ff30f4b15b5cd85dd9e95ebc7e84eb5a3 not available from file:/*/$TESTTMP/largefiles-repo (glob)
stuff/maybelarge.dat: largefile 76236b6a2c6102826c61af4297dd738fb3b1de38 not available from file:/*/$TESTTMP/largefiles-repo (glob)
stuff/maybelarge.dat: largefile 76236b6a2c6102826c61af4297dd738fb3b1de38 not available from file:/*/$TESTTMP/largefiles-repo (glob)
sub/maybelarge.dat: largefile 76236b6a2c6102826c61af4297dd738fb3b1de38 not available from file:/*/$TESTTMP/largefiles-repo (glob)
large: largefile 2e000fa7e85759c7f4c254d4d9c33ef481e459a7 not available from file:/*/$TESTTMP/largefiles-repo (glob)
sub/maybelarge.dat: largefile 76236b6a2c6102826c61af4297dd738fb3b1de38 not available from file:/*/$TESTTMP/largefiles-repo (glob)
large: largefile 2e000fa7e85759c7f4c254d4d9c33ef481e459a7 not available from file:/*/$TESTTMP/largefiles-repo (glob)
stuff/maybelarge.dat: largefile 34e163be8e43c5631d8b92e9c43ab0bf0fa62b9c not available from file:/*/$TESTTMP/largefiles-repo (glob)
large: largefile 2e000fa7e85759c7f4c254d4d9c33ef481e459a7 not available from file:/*/$TESTTMP/largefiles-repo (glob)
sub/maybelarge.dat: largefile 34e163be8e43c5631d8b92e9c43ab0bf0fa62b9c not available from file:/*/$TESTTMP/largefiles-repo (glob)
large: largefile 2e000fa7e85759c7f4c254d4d9c33ef481e459a7 not available from file:/*/$TESTTMP/largefiles-repo (glob)
0 additional largefiles cached
11 largefiles failed to download
abort: all largefiles must be present locally
[255]