match: making visitdir() deal with non-recursive entries
Primarily as an optimization to avoid recursing into directories that will
never have a match inside, this classifies each matcher pattern's root as
recursive or non-recursive (erring on the side of keeping it recursive,
which may lead to wasteful directory or manifest walks that yield no matches).
I measured the performance of "rootfilesin" in two repos:
- The Firefox repo with tree manifests, with
"hg files -r . -I rootfilesin:browser".
The browser directory contains about 3K files across 249 subdirectories.
- A specific Google-internal directory which contains 75K files across 19K
subdirectories, with "hg files -r . -I rootfilesin:REDACTED".
I tested with both cold and warm disk caches. Cold cache was produced by
running "sync; echo 3 > /proc/sys/vm/drop_caches". Warm cache was produced
by re-running the same command a few times.
These were the results:
Cold cache Warm cache
Before After Before After
firefox 0m5.1s 0m2.18s 0m0.22s 0m0.14s
google3 dir 2m3.9s 0m1.57s 0m8.12s 0m0.16s
Certain extensions, notably narrowhg, can depend on this for correctness
(not trying to recurse into directories for which it has no information).
$ remove() {
> hg rm $@
> echo "exit code: $?"
> hg st
> # do not use ls -R, which recurses in .hg subdirs on Mac OS X 10.5
> find . -name .hg -prune -o -type f -print | sort
> hg up -C
> }
$ cat >> $HGRCPATH <<EOF
> [progress]
> disable=False
> assume-tty = 1
> delay = 0
> # set changedelay really large so we don't see nested topics
> changedelay = 30000
> format = topic bar number
> refresh = 0
> width = 60
> EOF
$ hg init a
$ cd a
$ echo a > foo
file not managed
$ remove foo
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
not removing foo: file is untracked
exit code: 1
? foo
./foo
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg add foo
$ hg commit -m1
the table cases
00 state added, options none
$ echo b > bar
$ hg add bar
$ remove bar
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
skipping [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
not removing bar: file has been marked for add (use 'hg forget' to undo add)
exit code: 1
A bar
./bar
./foo
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
01 state clean, options none
$ remove foo
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
exit code: 0
R foo
? bar
./bar
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
02 state modified, options none
$ echo b >> foo
$ remove foo
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
skipping [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
not removing foo: file is modified (use -f to force removal)
exit code: 1
M foo
? bar
./bar
./foo
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
03 state missing, options none
$ rm foo
$ remove foo
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
exit code: 0
R foo
? bar
./bar
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
10 state added, options -f
$ echo b > bar
$ hg add bar
$ remove -f bar
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
exit code: 0
? bar
./bar
./foo
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm bar
11 state clean, options -f
$ remove -f foo
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
exit code: 0
R foo
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
12 state modified, options -f
$ echo b >> foo
$ remove -f foo
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
exit code: 0
R foo
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
13 state missing, options -f
$ rm foo
$ remove -f foo
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
exit code: 0
R foo
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
20 state added, options -A
$ echo b > bar
$ hg add bar
$ remove -A bar
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
skipping [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
not removing bar: file still exists
exit code: 1
A bar
./bar
./foo
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
21 state clean, options -A
$ remove -A foo
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
skipping [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
not removing foo: file still exists
exit code: 1
? bar
./bar
./foo
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
22 state modified, options -A
$ echo b >> foo
$ remove -A foo
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
skipping [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
not removing foo: file still exists
exit code: 1
M foo
? bar
./bar
./foo
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
23 state missing, options -A
$ rm foo
$ remove -A foo
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
exit code: 0
R foo
? bar
./bar
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
30 state added, options -Af
$ echo b > bar
$ hg add bar
$ remove -Af bar
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
exit code: 0
? bar
./bar
./foo
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm bar
31 state clean, options -Af
$ remove -Af foo
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
exit code: 0
R foo
./foo
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
32 state modified, options -Af
$ echo b >> foo
$ remove -Af foo
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
exit code: 0
R foo
./foo
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
33 state missing, options -Af
$ rm foo
$ remove -Af foo
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
exit code: 0
R foo
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
test some directory stuff
$ mkdir test
$ echo a > test/foo
$ echo b > test/bar
$ hg ci -Am2
adding test/bar
adding test/foo
dir, options none
$ rm test/bar
$ remove test
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
deleting [=====================> ] 1/2\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
deleting [===========================================>] 2/2\r (no-eol) (esc)
\r (no-eol) (esc)
removing test/bar (glob)
removing test/foo (glob)
exit code: 0
R test/bar
R test/foo
./foo
\r (no-eol) (esc)
updating [===========================================>] 2/2\r (no-eol) (esc)
\r (no-eol) (esc)
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
dir, options -f
$ rm test/bar
$ remove -f test
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
deleting [=====================> ] 1/2\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
deleting [===========================================>] 2/2\r (no-eol) (esc)
\r (no-eol) (esc)
removing test/bar (glob)
removing test/foo (glob)
exit code: 0
R test/bar
R test/foo
./foo
\r (no-eol) (esc)
updating [===========================================>] 2/2\r (no-eol) (esc)
\r (no-eol) (esc)
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
dir, options -A
$ rm test/bar
$ remove -A test
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
skipping [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
removing test/bar (glob)
not removing test/foo: file still exists (glob)
exit code: 1
R test/bar
./foo
./test/foo
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
dir, options -Af
$ rm test/bar
$ remove -Af test
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
deleting [=====================> ] 1/2\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
deleting [===========================================>] 2/2\r (no-eol) (esc)
\r (no-eol) (esc)
removing test/bar (glob)
removing test/foo (glob)
exit code: 0
R test/bar
R test/foo
./foo
./test/foo
\r (no-eol) (esc)
updating [===========================================>] 2/2\r (no-eol) (esc)
\r (no-eol) (esc)
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
test remove dropping empty trees (issue1861)
$ mkdir -p issue1861/b/c
$ echo x > issue1861/x
$ echo y > issue1861/b/c/y
$ hg ci -Am add
adding issue1861/b/c/y
adding issue1861/x
$ hg rm issue1861/b
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
removing issue1861/b/c/y (glob)
$ hg ci -m remove
$ ls issue1861
x
test that commit does not crash if the user removes a newly added file
$ touch f1
$ hg add f1
$ rm f1
$ hg ci -A -mx
removing f1
nothing changed
[1]
handling of untracked directories and missing files
$ mkdir d1
$ echo a > d1/a
$ hg rm --after d1
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
not removing d1: no tracked files
[1]
$ hg add d1/a
$ rm d1/a
$ hg rm --after d1
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
removing d1/a (glob)
$ hg rm --after nosuch
nosuch: * (glob)
\r (no-eol) (esc)
deleting [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
[1]