match: making visitdir() deal with non-recursive entries
Primarily as an optimization to avoid recursing into directories that will
never have a match inside, this classifies each matcher pattern's root as
recursive or non-recursive (erring on the side of keeping it recursive,
which may lead to wasteful directory or manifest walks that yield no matches).
I measured the performance of "rootfilesin" in two repos:
- The Firefox repo with tree manifests, with
"hg files -r . -I rootfilesin:browser".
The browser directory contains about 3K files across 249 subdirectories.
- A specific Google-internal directory which contains 75K files across 19K
subdirectories, with "hg files -r . -I rootfilesin:REDACTED".
I tested with both cold and warm disk caches. Cold cache was produced by
running "sync; echo 3 > /proc/sys/vm/drop_caches". Warm cache was produced
by re-running the same command a few times.
These were the results:
Cold cache Warm cache
Before After Before After
firefox 0m5.1s 0m2.18s 0m0.22s 0m0.14s
google3 dir 2m3.9s 0m1.57s 0m8.12s 0m0.16s
Certain extensions, notably narrowhg, can depend on this for correctness
(not trying to recurse into directories for which it has no information).
$ cat <<EOF >> $HGRCPATH
> [extensions]
> mq =
> shelve =
> [defaults]
> diff = --nodates --git
> qnew = --date '0 0'
> [shelve]
> maxbackups = 2
> EOF
$ hg init repo
$ cd repo
$ mkdir a b
$ echo a > a/a
$ echo b > b/b
$ echo c > c
$ echo d > d
$ echo x > x
$ hg addremove -q
shelve has a help message
$ hg shelve -h
hg shelve [OPTION]... [FILE]...
save and set aside changes from the working directory
Shelving takes files that "hg status" reports as not clean, saves the
modifications to a bundle (a shelved change), and reverts the files so
that their state in the working directory becomes clean.
To restore these changes to the working directory, using "hg unshelve";
this will work even if you switch to a different commit.
When no files are specified, "hg shelve" saves all not-clean files. If
specific files or directories are named, only changes to those files are
shelved.
In bare shelve (when no files are specified, without interactive, include
and exclude option), shelving remembers information if the working
directory was on newly created branch, in other words working directory
was on different branch than its first parent. In this situation
unshelving restores branch information to the working directory.
Each shelved change has a name that makes it easier to find later. The
name of a shelved change defaults to being based on the active bookmark,
or if there is no active bookmark, the current named branch. To specify a
different name, use "--name".
To see a list of existing shelved changes, use the "--list" option. For
each shelved change, this will print its name, age, and description; use "
--patch" or "--stat" for more details.
To delete specific shelved changes, use "--delete". To delete all shelved
changes, use "--cleanup".
(use 'hg help -e shelve' to show help for the shelve extension)
options ([+] can be repeated):
-A --addremove mark new/missing files as added/removed before
shelving
-u --unknown store unknown files in the shelve
--cleanup delete all shelved changes
--date DATE shelve with the specified commit date
-d --delete delete the named shelved change(s)
-e --edit invoke editor on commit messages
-l --list list current shelves
-m --message TEXT use text as shelve message
-n --name NAME use the given name for the shelved commit
-p --patch show patch
-i --interactive interactive mode, only works while creating a shelve
--stat output diffstat-style summary of changes
-I --include PATTERN [+] include names matching the given patterns
-X --exclude PATTERN [+] exclude names matching the given patterns
--mq operate on patch repository
(some details hidden, use --verbose to show complete help)
shelving in an empty repo should be possible
(this tests also that editor is not invoked, if '--edit' is not
specified)
$ HGEDITOR=cat hg shelve
shelved as default
0 files updated, 0 files merged, 5 files removed, 0 files unresolved
$ hg unshelve
unshelving change 'default'
$ hg commit -q -m 'initial commit'
$ hg shelve
nothing changed
[1]
make sure shelve files were backed up
$ ls .hg/shelve-backup
default.hg
default.patch
checks to make sure we dont create a directory or
hidden file while choosing a new shelve name
when we are given a name
$ hg shelve -n foo/bar
abort: shelved change names can not contain slashes
[255]
$ hg shelve -n .baz
abort: shelved change names can not start with '.'
[255]
$ hg shelve -n foo\\bar
abort: shelved change names can not contain slashes
[255]
when shelve has to choose itself
$ hg branch x/y -q
$ hg commit -q -m "Branch commit 0"
$ hg shelve
nothing changed
[1]
$ hg branch .x -q
$ hg commit -q -m "Branch commit 1"
$ hg shelve
nothing changed
[1]
$ hg branch x\\y -q
$ hg commit -q -m "Branch commit 2"
$ hg shelve
nothing changed
[1]
cleaning the branches made for name checking tests
$ hg up default -q
$ hg strip 3 -q
$ hg strip 2 -q
$ hg strip 1 -q
create an mq patch - shelving should work fine with a patch applied
$ echo n > n
$ hg add n
$ hg commit n -m second
$ hg qnew second.patch
shelve a change that we will delete later
$ echo a >> a/a
$ hg shelve
shelved as default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
set up some more complex changes to shelve
$ echo a >> a/a
$ hg mv b b.rename
moving b/b to b.rename/b (glob)
$ hg cp c c.copy
$ hg status -C
M a/a
A b.rename/b
b/b
A c.copy
c
R b/b
the common case - no options or filenames
$ hg shelve
shelved as default-01
2 files updated, 0 files merged, 2 files removed, 0 files unresolved
$ hg status -C
ensure that our shelved changes exist
$ hg shelve -l
default-01 (*)* changes to: [mq]: second.patch (glob)
default (*)* changes to: [mq]: second.patch (glob)
$ hg shelve -l -p default
default (*)* changes to: [mq]: second.patch (glob)
diff --git a/a/a b/a/a
--- a/a/a
+++ b/a/a
@@ -1,1 +1,2 @@
a
+a
$ hg shelve --list --addremove
abort: options '--list' and '--addremove' may not be used together
[255]
delete our older shelved change
$ hg shelve -d default
$ hg qfinish -a -q
ensure shelve backups aren't overwritten
$ ls .hg/shelve-backup/
default-1.hg
default-1.patch
default.hg
default.patch
local edits should not prevent a shelved change from applying
$ printf "z\na\n" > a/a
$ hg unshelve --keep
unshelving change 'default-01'
temporarily committing pending changes (restore with 'hg unshelve --abort')
rebasing shelved changes
rebasing 4:32c69314e062 "changes to: [mq]: second.patch" (tip)
merging a/a
$ hg revert --all -q
$ rm a/a.orig b.rename/b c.copy
apply it and make sure our state is as expected
(this also tests that same timestamp prevents backups from being
removed, even though there are more than 'maxbackups' backups)
$ f -t .hg/shelve-backup/default.patch
.hg/shelve-backup/default.patch: file
$ touch -t 200001010000 .hg/shelve-backup/default.patch
$ f -t .hg/shelve-backup/default-1.patch
.hg/shelve-backup/default-1.patch: file
$ touch -t 200001010000 .hg/shelve-backup/default-1.patch
$ hg unshelve
unshelving change 'default-01'
$ hg status -C
M a/a
A b.rename/b
b/b
A c.copy
c
R b/b
$ hg shelve -l
(both of default.hg and default-1.hg should be still kept, because it
is difficult to decide actual order of them from same timestamp)
$ ls .hg/shelve-backup/
default-01.hg
default-01.patch
default-1.hg
default-1.patch
default.hg
default.patch
$ hg unshelve
abort: no shelved changes to apply!
[255]
$ hg unshelve foo
abort: shelved change 'foo' not found
[255]
named shelves, specific filenames, and "commit messages" should all work
(this tests also that editor is invoked, if '--edit' is specified)
$ hg status -C
M a/a
A b.rename/b
b/b
A c.copy
c
R b/b
$ HGEDITOR=cat hg shelve -q -n wibble -m wat -e a
wat
HG: Enter commit message. Lines beginning with 'HG:' are removed.
HG: Leave message empty to abort commit.
HG: --
HG: user: shelve@localhost
HG: branch 'default'
HG: changed a/a
expect "a" to no longer be present, but status otherwise unchanged
$ hg status -C
A b.rename/b
b/b
A c.copy
c
R b/b
$ hg shelve -l --stat
wibble (*) wat (glob)
a/a | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
and now "a/a" should reappear
$ cd a
$ hg unshelve -q wibble
$ cd ..
$ hg status -C
M a/a
A b.rename/b
b/b
A c.copy
c
R b/b
ensure old shelve backups are being deleted automatically
$ ls .hg/shelve-backup/
default-01.hg
default-01.patch
wibble.hg
wibble.patch
cause unshelving to result in a merge with 'a' conflicting
$ hg shelve -q
$ echo c>>a/a
$ hg commit -m second
$ hg tip --template '{files}\n'
a/a
add an unrelated change that should be preserved
$ mkdir foo
$ echo foo > foo/foo
$ hg add foo/foo
force a conflicted merge to occur
$ hg unshelve
unshelving change 'default'
temporarily committing pending changes (restore with 'hg unshelve --abort')
rebasing shelved changes
rebasing 5:32c69314e062 "changes to: [mq]: second.patch" (tip)
merging a/a
warning: conflicts while merging a/a! (edit, then use 'hg resolve --mark')
unresolved conflicts (see 'hg resolve', then 'hg unshelve --continue')
[1]
ensure that we have a merge with unresolved conflicts
$ hg heads -q --template '{rev}\n'
5
4
$ hg parents -q --template '{rev}\n'
4
5
$ hg status
M a/a
M b.rename/b
M c.copy
R b/b
? a/a.orig
$ hg diff
diff --git a/a/a b/a/a
--- a/a/a
+++ b/a/a
@@ -1,2 +1,6 @@
a
+<<<<<<< dest: * - shelve: pending changes temporary commit (glob)
c
+=======
+a
+>>>>>>> source: 32c69314e062 - shelve: changes to: [mq]: second.patch
diff --git a/b/b b/b.rename/b
rename from b/b
rename to b.rename/b
diff --git a/c b/c.copy
copy from c
copy to c.copy
$ hg resolve -l
U a/a
$ hg shelve
abort: unshelve already in progress
(use 'hg unshelve --continue' or 'hg unshelve --abort')
[255]
abort the unshelve and be happy
$ hg status
M a/a
M b.rename/b
M c.copy
R b/b
? a/a.orig
$ hg unshelve -a
rebase aborted
unshelve of 'default' aborted
$ hg heads -q
3:2e69b451d1ea
$ hg parents
changeset: 3:2e69b451d1ea
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: second
$ hg resolve -l
$ hg status
A foo/foo
? a/a.orig
try to continue with no unshelve underway
$ hg unshelve -c
abort: no unshelve in progress
[255]
$ hg status
A foo/foo
? a/a.orig
redo the unshelve to get a conflict
$ hg unshelve -q
warning: conflicts while merging a/a! (edit, then use 'hg resolve --mark')
unresolved conflicts (see 'hg resolve', then 'hg unshelve --continue')
[1]
attempt to continue
$ hg unshelve -c
abort: unresolved conflicts, can't continue
(see 'hg resolve', then 'hg unshelve --continue')
[255]
$ hg revert -r . a/a
$ hg resolve -m a/a
(no more unresolved files)
continue: hg unshelve --continue
$ hg commit -m 'commit while unshelve in progress'
abort: unshelve already in progress
(use 'hg unshelve --continue' or 'hg unshelve --abort')
[255]
$ hg graft --continue
abort: no graft in progress
(continue: hg unshelve --continue)
[255]
$ hg unshelve -c
rebasing 5:32c69314e062 "changes to: [mq]: second.patch" (tip)
unshelve of 'default' complete
ensure the repo is as we hope
$ hg parents
changeset: 3:2e69b451d1ea
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: second
$ hg heads -q
3:2e69b451d1ea
$ hg status -C
A b.rename/b
b/b
A c.copy
c
A foo/foo
R b/b
? a/a.orig
there should be no shelves left
$ hg shelve -l
#if execbit
ensure that metadata-only changes are shelved
$ chmod +x a/a
$ hg shelve -q -n execbit a/a
$ hg status a/a
$ hg unshelve -q execbit
$ hg status a/a
M a/a
$ hg revert a/a
#endif
#if symlink
$ rm a/a
$ ln -s foo a/a
$ hg shelve -q -n symlink a/a
$ hg status a/a
$ hg unshelve -q symlink
$ hg status a/a
M a/a
$ hg revert a/a
#endif
set up another conflict between a commit and a shelved change
$ hg revert -q -C -a
$ rm a/a.orig b.rename/b c.copy
$ echo a >> a/a
$ hg shelve -q
$ echo x >> a/a
$ hg ci -m 'create conflict'
$ hg add foo/foo
if we resolve a conflict while unshelving, the unshelve should succeed
$ hg unshelve --tool :merge-other --keep
unshelving change 'default'
temporarily committing pending changes (restore with 'hg unshelve --abort')
rebasing shelved changes
rebasing 6:2f694dd83a13 "changes to: second" (tip)
merging a/a
$ hg parents -q
4:33f7f61e6c5e
$ hg shelve -l
default (*)* changes to: second (glob)
$ hg status
M a/a
A foo/foo
$ cat a/a
a
c
a
$ cat > a/a << EOF
> a
> c
> x
> EOF
$ HGMERGE=true hg unshelve
unshelving change 'default'
temporarily committing pending changes (restore with 'hg unshelve --abort')
rebasing shelved changes
rebasing 6:2f694dd83a13 "changes to: second" (tip)
merging a/a
note: rebase of 6:2f694dd83a13 created no changes to commit
$ hg parents -q
4:33f7f61e6c5e
$ hg shelve -l
$ hg status
A foo/foo
$ cat a/a
a
c
x
test keep and cleanup
$ hg shelve
shelved as default
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg shelve --list
default (*)* changes to: create conflict (glob)
$ hg unshelve -k
unshelving change 'default'
$ hg shelve --list
default (*)* changes to: create conflict (glob)
$ hg shelve --cleanup
$ hg shelve --list
$ hg shelve --cleanup --delete
abort: options '--cleanup' and '--delete' may not be used together
[255]
$ hg shelve --cleanup --patch
abort: options '--cleanup' and '--patch' may not be used together
[255]
$ hg shelve --cleanup --message MESSAGE
abort: options '--cleanup' and '--message' may not be used together
[255]
test bookmarks
$ hg bookmark test
$ hg bookmark
* test 4:33f7f61e6c5e
$ hg shelve
shelved as test
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg bookmark
* test 4:33f7f61e6c5e
$ hg unshelve
unshelving change 'test'
$ hg bookmark
* test 4:33f7f61e6c5e
shelve should still work even if mq is disabled
$ hg --config extensions.mq=! shelve
shelved as test
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg --config extensions.mq=! shelve --list
test (*)* changes to: create conflict (glob)
$ hg bookmark
* test 4:33f7f61e6c5e
$ hg --config extensions.mq=! unshelve
unshelving change 'test'
$ hg bookmark
* test 4:33f7f61e6c5e
shelve should leave dirstate clean (issue4055)
$ cd ..
$ hg init shelverebase
$ cd shelverebase
$ printf 'x\ny\n' > x
$ echo z > z
$ hg commit -Aqm xy
$ echo z >> x
$ hg commit -Aqm z
$ hg up 0
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ printf 'a\nx\ny\nz\n' > x
$ hg commit -Aqm xyz
$ echo c >> z
$ hg shelve
shelved as default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg rebase -d 1 --config extensions.rebase=
rebasing 2:323bfa07f744 "xyz" (tip)
merging x
saved backup bundle to $TESTTMP/shelverebase/.hg/strip-backup/323bfa07f744-78114325-backup.hg (glob)
$ hg unshelve
unshelving change 'default'
rebasing shelved changes
rebasing 4:82a0d7d6ba61 "changes to: xyz" (tip)
$ hg status
M z
$ cd ..
shelve should only unshelve pending changes (issue4068)
$ hg init onlypendingchanges
$ cd onlypendingchanges
$ touch a
$ hg ci -Aqm a
$ touch b
$ hg ci -Aqm b
$ hg up -q 0
$ touch c
$ hg ci -Aqm c
$ touch d
$ hg add d
$ hg shelve
shelved as default
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg up -q 1
$ hg unshelve
unshelving change 'default'
rebasing shelved changes
rebasing 3:958bcbd1776e "changes to: c" (tip)
$ hg status
A d
unshelve should work on an ancestor of the original commit
$ hg shelve
shelved as default
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg up 0
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg unshelve
unshelving change 'default'
rebasing shelved changes
rebasing 3:013284d9655e "changes to: b" (tip)
$ hg status
A d
test bug 4073 we need to enable obsolete markers for it
$ cat >> $HGRCPATH << EOF
> [experimental]
> evolution=createmarkers
> EOF
$ hg shelve
shelved as default
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg debugobsolete `hg --debug id -i -r 1`
$ hg unshelve
unshelving change 'default'
unshelve should leave unknown files alone (issue4113)
$ echo e > e
$ hg shelve
shelved as default
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg status
? e
$ hg unshelve
unshelving change 'default'
$ hg status
A d
? e
$ cat e
e
unshelve should keep a copy of unknown files
$ hg add e
$ hg shelve
shelved as default
0 files updated, 0 files merged, 2 files removed, 0 files unresolved
$ echo z > e
$ hg unshelve
unshelving change 'default'
$ cat e
e
$ cat e.orig
z
unshelve and conflicts with tracked and untracked files
preparing:
$ rm *.orig
$ hg ci -qm 'commit stuff'
$ hg phase -p null:
no other changes - no merge:
$ echo f > f
$ hg add f
$ hg shelve
shelved as default
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo g > f
$ hg unshelve
unshelving change 'default'
$ hg st
A f
? f.orig
$ cat f
f
$ cat f.orig
g
other uncommitted changes - merge:
$ hg st
A f
? f.orig
$ hg shelve
shelved as default
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg log -G --template '{rev} {desc|firstline} {author}' -R bundle://.hg/shelved/default.hg -r 'bundle()'
o 4 changes to: commit stuff shelve@localhost
|
~
$ hg log -G --template '{rev} {desc|firstline} {author}'
@ 3 commit stuff test
|
| o 2 c test
|/
o 0 a test
$ mv f.orig f
$ echo 1 > a
$ hg unshelve --date '1073741824 0'
unshelving change 'default'
temporarily committing pending changes (restore with 'hg unshelve --abort')
rebasing shelved changes
rebasing 5:81152db69da7 "changes to: commit stuff" (tip)
merging f
warning: conflicts while merging f! (edit, then use 'hg resolve --mark')
unresolved conflicts (see 'hg resolve', then 'hg unshelve --continue')
[1]
$ hg log -G --template '{rev} {desc|firstline} {author} {date|isodate}'
@ 5 changes to: commit stuff shelve@localhost 1970-01-01 00:00 +0000
|
| @ 4 pending changes temporary commit shelve@localhost 2004-01-10 13:37 +0000
|/
o 3 commit stuff test 1970-01-01 00:00 +0000
|
| o 2 c test 1970-01-01 00:00 +0000
|/
o 0 a test 1970-01-01 00:00 +0000
$ hg st
M f
? f.orig
$ cat f
<<<<<<< dest: 5f6b880e719b - shelve: pending changes temporary commit
g
=======
f
>>>>>>> source: 81152db69da7 - shelve: changes to: commit stuff
$ cat f.orig
g
$ hg unshelve --abort -t false
tool option will be ignored
rebase aborted
unshelve of 'default' aborted
$ hg st
M a
? f.orig
$ cat f.orig
g
$ hg unshelve
unshelving change 'default'
temporarily committing pending changes (restore with 'hg unshelve --abort')
rebasing shelved changes
rebasing 5:81152db69da7 "changes to: commit stuff" (tip)
$ hg st
M a
A f
? f.orig
other committed changes - merge:
$ hg shelve f
shelved as default
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg ci a -m 'intermediate other change'
$ mv f.orig f
$ hg unshelve
unshelving change 'default'
rebasing shelved changes
rebasing 5:81152db69da7 "changes to: commit stuff" (tip)
merging f
warning: conflicts while merging f! (edit, then use 'hg resolve --mark')
unresolved conflicts (see 'hg resolve', then 'hg unshelve --continue')
[1]
$ hg st
M f
? f.orig
$ cat f
<<<<<<< dest: * - test: intermediate other change (glob)
g
=======
f
>>>>>>> source: 81152db69da7 - shelve: changes to: commit stuff
$ cat f.orig
g
$ hg unshelve --abort
rebase aborted
unshelve of 'default' aborted
$ hg st
? f.orig
$ cat f.orig
g
$ hg shelve --delete default
Recreate some conflict again
$ cd ../repo
$ hg up -C -r 3
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(leaving bookmark test)
$ echo y >> a/a
$ hg shelve
shelved as default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg up test
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(activating bookmark test)
$ hg bookmark
* test 4:33f7f61e6c5e
$ hg unshelve
unshelving change 'default'
rebasing shelved changes
rebasing 5:e42a7da90865 "changes to: second" (tip)
merging a/a
warning: conflicts while merging a/a! (edit, then use 'hg resolve --mark')
unresolved conflicts (see 'hg resolve', then 'hg unshelve --continue')
[1]
$ hg bookmark
test 4:33f7f61e6c5e
Test that resolving all conflicts in one direction (so that the rebase
is a no-op), works (issue4398)
$ hg revert -a -r .
reverting a/a (glob)
$ hg resolve -m a/a
(no more unresolved files)
continue: hg unshelve --continue
$ hg unshelve -c
rebasing 5:e42a7da90865 "changes to: second" (tip)
note: rebase of 5:e42a7da90865 created no changes to commit
unshelve of 'default' complete
$ hg bookmark
* test 4:33f7f61e6c5e
$ hg diff
$ hg status
? a/a.orig
? foo/foo
$ hg summary
parent: 4:33f7f61e6c5e tip
create conflict
branch: default
bookmarks: *test
commit: 2 unknown (clean)
update: (current)
phases: 5 draft
$ hg shelve --delete --stat
abort: options '--delete' and '--stat' may not be used together
[255]
$ hg shelve --delete --name NAME
abort: options '--delete' and '--name' may not be used together
[255]
Test interactive shelve
$ cat <<EOF >> $HGRCPATH
> [ui]
> interactive = true
> EOF
$ echo 'a' >> a/b
$ cat a/a >> a/b
$ echo 'x' >> a/b
$ mv a/b a/a
$ echo 'a' >> foo/foo
$ hg st
M a/a
? a/a.orig
? foo/foo
$ cat a/a
a
a
c
x
x
$ cat foo/foo
foo
a
$ hg shelve --interactive --config ui.interactive=false
abort: running non-interactively
[255]
$ hg shelve --interactive << EOF
> y
> y
> n
> EOF
diff --git a/a/a b/a/a
2 hunks, 2 lines changed
examine changes to 'a/a'? [Ynesfdaq?] y
@@ -1,3 +1,4 @@
+a
a
c
x
record change 1/2 to 'a/a'? [Ynesfdaq?] y
@@ -1,3 +2,4 @@
a
c
x
+x
record change 2/2 to 'a/a'? [Ynesfdaq?] n
shelved as test
merging a/a
0 files updated, 1 files merged, 0 files removed, 0 files unresolved
$ cat a/a
a
c
x
x
$ cat foo/foo
foo
a
$ hg st
M a/a
? foo/foo
$ hg bookmark
* test 4:33f7f61e6c5e
$ hg unshelve
unshelving change 'test'
temporarily committing pending changes (restore with 'hg unshelve --abort')
rebasing shelved changes
rebasing 6:96a1354f65f6 "changes to: create conflict" (tip)
merging a/a
$ hg bookmark
* test 4:33f7f61e6c5e
$ cat a/a
a
a
c
x
x
shelve --patch and shelve --stat should work with valid shelfnames
$ hg up --clean .
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(leaving bookmark test)
$ hg shelve --list
$ echo 'patch a' > shelf-patch-a
$ hg add shelf-patch-a
$ hg shelve
shelved as default
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo 'patch b' > shelf-patch-b
$ hg add shelf-patch-b
$ hg shelve
shelved as default-01
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg shelve --patch default default-01
default-01 (*)* changes to: create conflict (glob)
diff --git a/shelf-patch-b b/shelf-patch-b
new file mode 100644
--- /dev/null
+++ b/shelf-patch-b
@@ -0,0 +1,1 @@
+patch b
default (*)* changes to: create conflict (glob)
diff --git a/shelf-patch-a b/shelf-patch-a
new file mode 100644
--- /dev/null
+++ b/shelf-patch-a
@@ -0,0 +1,1 @@
+patch a
$ hg shelve --stat default default-01
default-01 (*)* changes to: create conflict (glob)
shelf-patch-b | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
default (*)* changes to: create conflict (glob)
shelf-patch-a | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
$ hg shelve --patch default
default (*)* changes to: create conflict (glob)
diff --git a/shelf-patch-a b/shelf-patch-a
new file mode 100644
--- /dev/null
+++ b/shelf-patch-a
@@ -0,0 +1,1 @@
+patch a
$ hg shelve --stat default
default (*)* changes to: create conflict (glob)
shelf-patch-a | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
$ hg shelve --patch nonexistentshelf
abort: cannot find shelf nonexistentshelf
[255]
$ hg shelve --stat nonexistentshelf
abort: cannot find shelf nonexistentshelf
[255]
$ hg shelve --patch default nonexistentshelf
abort: cannot find shelf nonexistentshelf
[255]
$ hg shelve --patch
abort: --patch expects at least one shelf
[255]
$ cd ..
Shelve from general delta repo uses bundle2 on disk
--------------------------------------------------
no general delta
$ hg clone --pull repo bundle1 --config format.usegeneraldelta=0
requesting all changes
adding changesets
adding manifests
adding file changes
added 5 changesets with 8 changes to 6 files
updating to branch default
6 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd bundle1
$ echo babar > jungle
$ hg add jungle
$ hg shelve
shelved as default
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg debugbundle .hg/shelved/*.hg
45993d65fe9dc3c6d8764b9c3b07fa831ee7d92d
$ cd ..
with general delta
$ hg clone --pull repo bundle2 --config format.usegeneraldelta=1
requesting all changes
adding changesets
adding manifests
adding file changes
added 5 changesets with 8 changes to 6 files
updating to branch default
6 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd bundle2
$ echo babar > jungle
$ hg add jungle
$ hg shelve
shelved as default
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg debugbundle .hg/shelved/*.hg
Stream params: sortdict([('Compression', 'BZ')])
changegroup -- "sortdict([('version', '02'), ('nbchanges', '1')])"
45993d65fe9dc3c6d8764b9c3b07fa831ee7d92d
$ cd ..
Test visibility of in-memory changes inside transaction to external hook
------------------------------------------------------------------------
$ cd repo
$ echo xxxx >> x
$ hg commit -m "#5: changes to invoke rebase"
$ cat > $TESTTMP/checkvisibility.sh <<EOF
> echo "==== \$1:"
> hg parents --template "VISIBLE {rev}:{node|short}\n"
> # test that pending changes are hidden
> unset HG_PENDING
> hg parents --template "ACTUAL {rev}:{node|short}\n"
> echo "===="
> EOF
$ cat >> .hg/hgrc <<EOF
> [defaults]
> # to fix hash id of temporary revisions
> unshelve = --date '0 0'
> EOF
"hg unshelve" at REV5 implies steps below:
(1) commit changes in the working directory (REV6)
(2) unbundle shelved revision (REV7)
(3) rebase: merge REV7 into REV6 (REV6 => REV6, REV7)
(4) rebase: commit merged revision (REV8)
(5) rebase: update to REV6 (REV8 => REV6)
(6) update to REV5 (REV6 => REV5)
(7) abort transaction
== test visibility to external preupdate hook
$ cat >> .hg/hgrc <<EOF
> [hooks]
> preupdate.visibility = sh $TESTTMP/checkvisibility.sh preupdate
> EOF
$ echo nnnn >> n
$ sh $TESTTMP/checkvisibility.sh before-unshelving
==== before-unshelving:
VISIBLE 5:703117a2acfb
ACTUAL 5:703117a2acfb
====
$ hg unshelve --keep default
temporarily committing pending changes (restore with 'hg unshelve --abort')
rebasing shelved changes
rebasing 7:206bf5d4f922 "changes to: create conflict" (tip)
==== preupdate:
VISIBLE 6:66b86db80ee4
ACTUAL 5:703117a2acfb
====
==== preupdate:
VISIBLE 8:a0e04704317e
ACTUAL 5:703117a2acfb
====
==== preupdate:
VISIBLE 6:66b86db80ee4
ACTUAL 5:703117a2acfb
====
$ cat >> .hg/hgrc <<EOF
> [hooks]
> preupdate.visibility =
> EOF
$ sh $TESTTMP/checkvisibility.sh after-unshelving
==== after-unshelving:
VISIBLE 5:703117a2acfb
ACTUAL 5:703117a2acfb
====
== test visibility to external update hook
$ hg update -q -C 5
$ cat >> .hg/hgrc <<EOF
> [hooks]
> update.visibility = sh $TESTTMP/checkvisibility.sh update
> EOF
$ echo nnnn >> n
$ sh $TESTTMP/checkvisibility.sh before-unshelving
==== before-unshelving:
VISIBLE 5:703117a2acfb
ACTUAL 5:703117a2acfb
====
$ hg unshelve --keep default
temporarily committing pending changes (restore with 'hg unshelve --abort')
rebasing shelved changes
rebasing 7:206bf5d4f922 "changes to: create conflict" (tip)
==== update:
VISIBLE 6:66b86db80ee4
VISIBLE 7:206bf5d4f922
ACTUAL 5:703117a2acfb
====
==== update:
VISIBLE 6:66b86db80ee4
ACTUAL 5:703117a2acfb
====
==== update:
VISIBLE 5:703117a2acfb
ACTUAL 5:703117a2acfb
====
$ cat >> .hg/hgrc <<EOF
> [hooks]
> update.visibility =
> EOF
$ sh $TESTTMP/checkvisibility.sh after-unshelving
==== after-unshelving:
VISIBLE 5:703117a2acfb
ACTUAL 5:703117a2acfb
====
$ cd ..
test .orig files go where the user wants them to
---------------------------------------------------------------
$ hg init salvage
$ cd salvage
$ echo 'content' > root
$ hg commit -A -m 'root' -q
$ echo '' > root
$ hg shelve -q
$ echo 'contADDent' > root
$ hg unshelve -q --config 'ui.origbackuppath=.hg/origbackups'
warning: conflicts while merging root! (edit, then use 'hg resolve --mark')
unresolved conflicts (see 'hg resolve', then 'hg unshelve --continue')
[1]
$ ls .hg/origbackups
root.orig
$ rm -rf .hg/origbackups
test Abort unshelve always gets user out of the unshelved state
---------------------------------------------------------------
Wreak havoc on the unshelve process
$ rm .hg/unshelverebasestate
$ hg unshelve --abort
unshelve of 'default' aborted
abort: (No such file or directory|The system cannot find the file specified) (re)
[255]
Can the user leave the current state?
$ hg up -C .
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
Try again but with a corrupted shelve state file
$ hg strip -r 2 -r 1 -q
$ hg up -r 0 -q
$ echo '' > root
$ hg shelve -q
$ echo 'contADDent' > root
$ hg unshelve -q
warning: conflicts while merging root! (edit, then use 'hg resolve --mark')
unresolved conflicts (see 'hg resolve', then 'hg unshelve --continue')
[1]
$ sed 's/ae8c668541e8/123456789012/' .hg/shelvedstate > ../corrupt-shelvedstate
$ mv ../corrupt-shelvedstate .hg/histedit-state
$ hg unshelve --abort 2>&1 | grep 'rebase aborted'
rebase aborted
$ hg up -C .
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd ..
Keep active bookmark while (un)shelving even on shared repo (issue4940)
-----------------------------------------------------------------------
$ cat <<EOF >> $HGRCPATH
> [extensions]
> share =
> EOF
$ hg bookmarks -R repo
test 4:33f7f61e6c5e
$ hg share -B repo share
updating working directory
6 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd share
$ hg bookmarks
test 4:33f7f61e6c5e
$ hg bookmarks foo
$ hg bookmarks
* foo 5:703117a2acfb
test 4:33f7f61e6c5e
$ echo x >> x
$ hg shelve
shelved as foo
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg bookmarks
* foo 5:703117a2acfb
test 4:33f7f61e6c5e
$ hg unshelve
unshelving change 'foo'
$ hg bookmarks
* foo 5:703117a2acfb
test 4:33f7f61e6c5e
$ cd ..
Shelve and unshelve unknown files. For the purposes of unshelve, a shelved
unknown file is the same as a shelved added file, except that it will be in
unknown state after unshelve if and only if it was either absent or unknown
before the unshelve operation.
$ hg init unknowns
$ cd unknowns
The simplest case is if I simply have an unknown file that I shelve and unshelve
$ echo unknown > unknown
$ hg status
? unknown
$ hg shelve --unknown
shelved as default
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg status
$ hg unshelve
unshelving change 'default'
$ hg status
? unknown
$ rm unknown
If I shelve, add the file, and unshelve, does it stay added?
$ echo unknown > unknown
$ hg shelve -u
shelved as default
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg status
$ touch unknown
$ hg add unknown
$ hg status
A unknown
$ hg unshelve
unshelving change 'default'
temporarily committing pending changes (restore with 'hg unshelve --abort')
rebasing shelved changes
rebasing 1:098df96e7410 "(changes in empty repository)" (tip)
merging unknown
$ hg status
A unknown
$ hg forget unknown
$ rm unknown
And if I shelve, commit, then unshelve, does it become modified?
$ echo unknown > unknown
$ hg shelve -u
shelved as default
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg status
$ touch unknown
$ hg add unknown
$ hg commit -qm "Add unknown"
$ hg status
$ hg unshelve
unshelving change 'default'
rebasing shelved changes
rebasing 1:098df96e7410 "(changes in empty repository)" (tip)
merging unknown
$ hg status
M unknown
$ hg remove --force unknown
$ hg commit -qm "Remove unknown"
$ cd ..
We expects that non-bare shelve keeps newly created branch in
working directory.
$ hg init shelve-preserve-new-branch
$ cd shelve-preserve-new-branch
$ echo "a" >> a
$ hg add a
$ echo "b" >> b
$ hg add b
$ hg commit -m "ab"
$ echo "aa" >> a
$ echo "bb" >> b
$ hg branch new-branch
marked working directory as branch new-branch
(branches are permanent and global, did you want a bookmark?)
$ hg status
M a
M b
$ hg branch
new-branch
$ hg shelve a
shelved as default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg branch
new-branch
$ hg status
M b
$ touch "c" >> c
$ hg add c
$ hg status
M b
A c
$ hg shelve --exclude c
shelved as default-01
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg branch
new-branch
$ hg status
A c
$ hg shelve --include c
shelved as default-02
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg branch
new-branch
$ hg status
$ echo "d" >> d
$ hg add d
$ hg status
A d
We expect that bare-shelve will not keep branch in current working directory.
$ hg shelve
shelved as default-03
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg branch
default
$ cd ..
When i shelve commit on newly created branch i expect
that after unshelve newly created branch will be preserved.
$ hg init shelve_on_new_branch_simple
$ cd shelve_on_new_branch_simple
$ echo "aaa" >> a
$ hg commit -A -m "a"
adding a
$ hg branch
default
$ hg branch test
marked working directory as branch test
(branches are permanent and global, did you want a bookmark?)
$ echo "bbb" >> a
$ hg status
M a
$ hg shelve
shelved as default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg branch
default
$ echo "bbb" >> b
$ hg status
? b
$ hg unshelve
unshelving change 'default'
marked working directory as branch test
$ hg status
M a
? b
$ hg branch
test
$ cd ..
When i shelve commit on newly created branch, make
some changes, unshelve it and running into merge
conflicts i expect that after fixing them and
running unshelve --continue newly created branch
will be preserved.
$ hg init shelve_on_new_branch_conflict
$ cd shelve_on_new_branch_conflict
$ echo "aaa" >> a
$ hg commit -A -m "a"
adding a
$ hg branch
default
$ hg branch test
marked working directory as branch test
(branches are permanent and global, did you want a bookmark?)
$ echo "bbb" >> a
$ hg status
M a
$ hg shelve
shelved as default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg branch
default
$ echo "ccc" >> a
$ hg status
M a
$ hg unshelve
unshelving change 'default'
temporarily committing pending changes (restore with 'hg unshelve --abort')
rebasing shelved changes
rebasing 2:425c97ef07f3 "changes to: a" (tip)
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
unresolved conflicts (see 'hg resolve', then 'hg unshelve --continue')
[1]
$ echo "aaabbbccc" > a
$ rm a.orig
$ hg resolve --mark a
(no more unresolved files)
continue: hg unshelve --continue
$ hg unshelve --continue
rebasing 2:425c97ef07f3 "changes to: a" (tip)
marked working directory as branch test
unshelve of 'default' complete
$ cat a
aaabbbccc
$ hg status
M a
$ hg branch
test
$ hg commit -m "test-commit"
When i shelve on test branch, update to default branch
and unshelve i expect that it will not preserve previous
test branch.
$ echo "xxx" > b
$ hg add b
$ hg shelve
shelved as test
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg update -r default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg unshelve
unshelving change 'test'
rebasing shelved changes
rebasing 2:357525f34729 "changes to: test-commit" (tip)
$ hg status
A b
$ hg branch
default
$ cd ..
When i unshelve resulting in merge conflicts and makes saved
file shelvedstate looks like in previous versions in
mercurial(without restore branch information in 7th line) i
expect that after resolving conflicts and successfully
running 'shelve --continue' the branch information won't be
restored and branch will be unchanged.
shelve on new branch, conflict with previous shelvedstate
$ hg init conflict
$ cd conflict
$ echo "aaa" >> a
$ hg commit -A -m "a"
adding a
$ hg branch
default
$ hg branch test
marked working directory as branch test
(branches are permanent and global, did you want a bookmark?)
$ echo "bbb" >> a
$ hg status
M a
$ hg shelve
shelved as default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg branch
default
$ echo "ccc" >> a
$ hg status
M a
$ hg unshelve
unshelving change 'default'
temporarily committing pending changes (restore with 'hg unshelve --abort')
rebasing shelved changes
rebasing 2:425c97ef07f3 "changes to: a" (tip)
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
unresolved conflicts (see 'hg resolve', then 'hg unshelve --continue')
[1]
Removing restore branch information from shelvedstate file(making it looks like
in previous versions) and running unshelve --continue
$ head -n 6 < .hg/shelvedstate > .hg/shelvedstate_oldformat
$ rm .hg/shelvedstate
$ mv .hg/shelvedstate_oldformat .hg/shelvedstate
$ echo "aaabbbccc" > a
$ rm a.orig
$ hg resolve --mark a
(no more unresolved files)
continue: hg unshelve --continue
$ hg unshelve --continue
rebasing 2:425c97ef07f3 "changes to: a" (tip)
unshelve of 'default' complete
$ cat a
aaabbbccc
$ hg status
M a
$ hg branch
default
$ cd ..
On non bare shelve the branch information shouldn't be restored
$ hg init bare_shelve_on_new_branch
$ cd bare_shelve_on_new_branch
$ echo "aaa" >> a
$ hg commit -A -m "a"
adding a
$ hg branch
default
$ hg branch test
marked working directory as branch test
(branches are permanent and global, did you want a bookmark?)
$ echo "bbb" >> a
$ hg status
M a
$ hg shelve a
shelved as default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg branch
test
$ hg branch default
marked working directory as branch default
(branches are permanent and global, did you want a bookmark?)
$ echo "bbb" >> b
$ hg status
? b
$ hg unshelve
unshelving change 'default'
$ hg status
M a
? b
$ hg branch
default
$ cd ..
Prepare unshelve with a corrupted shelvedstate
$ hg init r1 && cd r1
$ echo text1 > file && hg add file
$ hg shelve
shelved as default
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo text2 > file && hg ci -Am text1
adding file
$ hg unshelve
unshelving change 'default'
rebasing shelved changes
rebasing 1:396ea74229f9 "(changes in empty repository)" (tip)
merging file
warning: conflicts while merging file! (edit, then use 'hg resolve --mark')
unresolved conflicts (see 'hg resolve', then 'hg unshelve --continue')
[1]
$ echo somethingsomething > .hg/shelvedstate
Unshelve --continue fails with appropriate message if shelvedstate is corrupted
$ hg unshelve --continue
abort: corrupted shelved state file
(please run hg unshelve --abort to abort unshelve operation)
[255]
Unshelve --abort works with a corrupted shelvedstate
$ hg unshelve --abort
could not read shelved state file, your working copy may be in an unexpected state
please update to some commit
Unshelve --abort fails with appropriate message if there's no unshelve in
progress
$ hg unshelve --abort
abort: no unshelve in progress
[255]
$ cd ..
Unshelve respects --keep even if user intervention is needed
$ hg init unshelvekeep && cd unshelvekeep
$ echo 1 > file && hg ci -Am 1
adding file
$ echo 2 >> file
$ hg shelve
shelved as default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo 3 >> file && hg ci -Am 13
$ hg shelve --list
default (1s ago) changes to: 1
$ hg unshelve --keep
unshelving change 'default'
rebasing shelved changes
rebasing 2:3fbe6fbb0bef "changes to: 1" (tip)
merging file
warning: conflicts while merging file! (edit, then use 'hg resolve --mark')
unresolved conflicts (see 'hg resolve', then 'hg unshelve --continue')
[1]
$ hg resolve --mark file
(no more unresolved files)
continue: hg unshelve --continue
$ hg unshelve --continue
rebasing 2:3fbe6fbb0bef "changes to: 1" (tip)
unshelve of 'default' complete
$ hg shelve --list
default (*s ago) changes to: 1 (glob)
$ cd ..
Unshelving when there are deleted files does not crash (issue4176)
$ hg init unshelve-deleted-file && cd unshelve-deleted-file
$ echo a > a && echo b > b && hg ci -Am ab
adding a
adding b
$ echo aa > a && hg shelve
shelved as default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm b
$ hg st
! b
$ hg unshelve
unshelving change 'default'
$ hg shelve
shelved as default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm a && echo b > b
$ hg st
! a
$ hg unshelve
unshelving change 'default'
abort: shelved change touches missing files
(run hg status to see which files are missing)
[255]
$ hg st
! a