match: making visitdir() deal with non-recursive entries
Primarily as an optimization to avoid recursing into directories that will
never have a match inside, this classifies each matcher pattern's root as
recursive or non-recursive (erring on the side of keeping it recursive,
which may lead to wasteful directory or manifest walks that yield no matches).
I measured the performance of "rootfilesin" in two repos:
- The Firefox repo with tree manifests, with
"hg files -r . -I rootfilesin:browser".
The browser directory contains about 3K files across 249 subdirectories.
- A specific Google-internal directory which contains 75K files across 19K
subdirectories, with "hg files -r . -I rootfilesin:REDACTED".
I tested with both cold and warm disk caches. Cold cache was produced by
running "sync; echo 3 > /proc/sys/vm/drop_caches". Warm cache was produced
by re-running the same command a few times.
These were the results:
Cold cache Warm cache
Before After Before After
firefox 0m5.1s 0m2.18s 0m0.22s 0m0.14s
google3 dir 2m3.9s 0m1.57s 0m8.12s 0m0.16s
Certain extensions, notably narrowhg, can depend on this for correctness
(not trying to recurse into directories for which it has no information).
#require killdaemons
Tests discovery against servers without getbundle support:
$ CAP="getbundle bundle2"
$ . "$TESTDIR/notcapable"
$ cat >> $HGRCPATH <<EOF
> [ui]
> logtemplate="{rev} {node|short}: {desc} {branches}\n"
> EOF
Setup HTTP server control:
$ remote=http://localhost:$HGPORT/
$ export remote
$ tstart() {
> echo '[web]' > $1/.hg/hgrc
> echo 'push_ssl = false' >> $1/.hg/hgrc
> echo 'allow_push = *' >> $1/.hg/hgrc
> hg serve -R $1 -p $HGPORT -d --pid-file=hg.pid -A access.log -E errors.log
> cat hg.pid >> $DAEMON_PIDS
> }
$ tstop() {
> killdaemons.py
> [ "$1" ] && cut -d' ' -f6- access.log && cat errors.log
> rm access.log errors.log
> }
Both are empty:
$ hg init empty1
$ hg init empty2
$ tstart empty2
$ hg incoming -R empty1 $remote
comparing with http://localhost:$HGPORT/
no changes found
[1]
$ hg outgoing -R empty1 $remote
comparing with http://localhost:$HGPORT/
no changes found
[1]
$ hg pull -R empty1 $remote
pulling from http://localhost:$HGPORT/
no changes found
$ hg push -R empty1 $remote
pushing to http://localhost:$HGPORT/
no changes found
[1]
$ tstop
Base repo:
$ hg init main
$ cd main
$ hg debugbuilddag -mo '+2:tbase @name1 +3:thead1 <tbase @name2 +4:thead2 @both /thead1 +2:tmaintip'
$ hg log -G
o 11 a19bfa7e7328: r11 both
|
o 10 8b6bad1512e1: r10 both
|
o 9 025829e08038: r9 both
|\
| o 8 d8f638ac69e9: r8 name2
| |
| o 7 b6b4d315a2ac: r7 name2
| |
| o 6 6c6f5d5f3c11: r6 name2
| |
| o 5 70314b29987d: r5 name2
| |
o | 4 e71dbbc70e03: r4 name1
| |
o | 3 2c8d5d5ec612: r3 name1
| |
o | 2 a7892891da29: r2 name1
|/
o 1 0019a3b924fd: r1
|
o 0 d57206cc072a: r0
$ cd ..
$ tstart main
Full clone:
$ hg clone main full
updating to branch default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd full
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
no changes found
$ hg push $remote
pushing to http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
Local is empty:
$ cd empty1
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
0 d57206cc072a: r0
1 0019a3b924fd: r1
2 a7892891da29: r2 name1
3 2c8d5d5ec612: r3 name1
4 e71dbbc70e03: r4 name1
5 70314b29987d: r5 name2
6 6c6f5d5f3c11: r6 name2
7 b6b4d315a2ac: r7 name2
8 d8f638ac69e9: r8 name2
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
no changes found
[1]
$ hg push $remote
pushing to http://localhost:$HGPORT/
no changes found
[1]
$ hg pull $remote
pulling from http://localhost:$HGPORT/
requesting all changes
adding changesets
adding manifests
adding file changes
added 12 changesets with 24 changes to 2 files
(run 'hg update' to get a working copy)
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
Local is subset:
$ hg clone main subset --rev name2 ; cd subset
adding changesets
adding manifests
adding file changes
added 6 changesets with 12 changes to 2 files
updating to branch name2
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
6 a7892891da29: r2 name1
7 2c8d5d5ec612: r3 name1
8 e71dbbc70e03: r4 name1
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg push $remote
pushing to http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
adding changesets
adding manifests
adding file changes
added 6 changesets with 12 changes to 2 files
(run 'hg update' to get a working copy)
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
$ tstop
Remote is empty:
$ tstart empty2
$ cd main
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
0 d57206cc072a: r0
1 0019a3b924fd: r1
2 a7892891da29: r2 name1
3 2c8d5d5ec612: r3 name1
4 e71dbbc70e03: r4 name1
5 70314b29987d: r5 name2
6 6c6f5d5f3c11: r6 name2
7 b6b4d315a2ac: r7 name2
8 d8f638ac69e9: r8 name2
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
no changes found
$ hg push $remote
pushing to http://localhost:$HGPORT/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 12 changesets with 24 changes to 2 files
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
$ tstop
Local is superset:
$ hg clone main subset2 --rev name2
adding changesets
adding manifests
adding file changes
added 6 changesets with 12 changes to 2 files
updating to branch name2
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ tstart subset2
$ cd main
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
2 a7892891da29: r2 name1
3 2c8d5d5ec612: r3 name1
4 e71dbbc70e03: r4 name1
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
no changes found
$ hg push $remote
pushing to http://localhost:$HGPORT/
searching for changes
abort: push creates new remote branches: both, name1!
(use 'hg push --new-branch' to create new remote branches)
[255]
$ hg push $remote --new-branch
pushing to http://localhost:$HGPORT/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 6 changesets with 12 changes to 2 files
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
$ tstop
Partial pull:
$ tstart main
$ hg clone $remote partial --rev name2
adding changesets
adding manifests
adding file changes
added 6 changesets with 12 changes to 2 files
updating to branch name2
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd partial
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
6 a7892891da29: r2 name1
7 2c8d5d5ec612: r3 name1
8 e71dbbc70e03: r4 name1
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ hg incoming $remote --rev name1
comparing with http://localhost:$HGPORT/
searching for changes
6 a7892891da29: r2 name1
7 2c8d5d5ec612: r3 name1
8 e71dbbc70e03: r4 name1
$ hg pull $remote --rev name1
pulling from http://localhost:$HGPORT/
searching for changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 6 changes to 2 files (+1 heads)
(run 'hg heads' to see heads)
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ cd ..
$ tstop
Both have new stuff in new named branches:
$ hg clone main repo1a --rev name1 -q
$ hg clone repo1a repo1b -q
$ hg clone main repo2a --rev name2 -q
$ hg clone repo2a repo2b -q
$ tstart repo1a
$ cd repo2a
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
6 a7892891da29: r2 name1
7 2c8d5d5ec612: r3 name1
8 e71dbbc70e03: r4 name1
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
2 70314b29987d: r5 name2
3 6c6f5d5f3c11: r6 name2
4 b6b4d315a2ac: r7 name2
5 d8f638ac69e9: r8 name2
$ hg push $remote --new-branch
pushing to http://localhost:$HGPORT/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 4 changesets with 8 changes to 2 files (+1 heads)
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 6 changes to 2 files (+1 heads)
(run 'hg heads' to see heads)
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
$ tstop
$ tstart repo1b
$ cd repo2b
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
6 a7892891da29: r2 name1
7 2c8d5d5ec612: r3 name1
8 e71dbbc70e03: r4 name1
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
2 70314b29987d: r5 name2
3 6c6f5d5f3c11: r6 name2
4 b6b4d315a2ac: r7 name2
5 d8f638ac69e9: r8 name2
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 6 changes to 2 files (+1 heads)
(run 'hg heads' to see heads)
$ hg push $remote --new-branch
pushing to http://localhost:$HGPORT/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 4 changesets with 8 changes to 2 files (+1 heads)
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
$ tstop
Both have new stuff in existing named branches:
$ rm -r repo1a repo1b repo2a repo2b
$ hg clone main repo1a --rev 3 --rev 8 -q
$ hg clone repo1a repo1b -q
$ hg clone main repo2a --rev 4 --rev 7 -q
$ hg clone repo2a repo2b -q
$ tstart repo1a
$ cd repo2a
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
8 d8f638ac69e9: r8 name2
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
4 e71dbbc70e03: r4 name1
$ hg push $remote --new-branch
pushing to http://localhost:$HGPORT/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 2 changes to 2 files
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 2 changes to 2 files
(run 'hg update' to get a working copy)
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
$ tstop
$ tstart repo1b
$ cd repo2b
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
8 d8f638ac69e9: r8 name2
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
4 e71dbbc70e03: r4 name1
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 2 changes to 2 files
(run 'hg update' to get a working copy)
$ hg push $remote --new-branch
pushing to http://localhost:$HGPORT/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 2 changes to 2 files
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
#if zstd
$ tstop show
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=zstd,zlib,none,bzip2
"GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=zstd,zlib,none,bzip2
"GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=zstd,zlib,none,bzip2
"GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=zstd,zlib,none,bzip2
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=zstd,zlib,none,bzip2
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=zstd,zlib,none,bzip2
"GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=zstd,zlib,none,bzip2
"GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=zstd,zlib,none,bzip2
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=zstd,zlib,none,bzip2
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=zstd,zlib,none,bzip2
"GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=zstd,zlib,none,bzip2
"GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=zstd,zlib,none,bzip2
"GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=zstd,zlib,none,bzip2
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=zstd,zlib,none,bzip2
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=zstd,zlib,none,bzip2
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=zstd,zlib,none,bzip2
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=zstd,zlib,none,bzip2
"GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=zstd,zlib,none,bzip2
"GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=zstd,zlib,none,bzip2
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=zstd,zlib,none,bzip2
"POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=686173686564+1827a5bb63e602382eb89dd58f2ac9f3b007ad91* (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=zstd,zlib,none,bzip2
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=zstd,zlib,none,bzip2
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=zstd,zlib,none,bzip2
#else
$ tstop show
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=zlib,none,bzip2
"GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=zlib,none,bzip2
"GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=zlib,none,bzip2
"GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=zlib,none,bzip2
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=zlib,none,bzip2
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=zlib,none,bzip2
"GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=zlib,none,bzip2
"GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=zlib,none,bzip2
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=zlib,none,bzip2
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=zlib,none,bzip2
"GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=zlib,none,bzip2
"GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=zlib,none,bzip2
"GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=zlib,none,bzip2
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=zlib,none,bzip2
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=zlib,none,bzip2
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=zlib,none,bzip2
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=zlib,none,bzip2
"GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=zlib,none,bzip2
"GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=zlib,none,bzip2
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=zlib,none,bzip2
"POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=686173686564+1827a5bb63e602382eb89dd58f2ac9f3b007ad91* (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=zlib,none,bzip2
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=zlib,none,bzip2
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=zlib,none,bzip2
#endif