Mercurial > hg

================
python-zstandard
================

This project provides Python bindings for interfacing with the
`Zstandard <http://www.zstd.net>`_ compression library. A C extension
and CFFI interface are provided.

The primary goal of the project is to provide a rich interface to the
underlying C API through a Pythonic interface while not sacrificing
performance. This means exposing most of the features and flexibility
of the C API while not sacrificing usability or safety that Python provides.

The canonical home for this project is
https://github.com/indygreg/python-zstandard.

|  |ci-status| |win-ci-status|

State of Project
================

The project is officially in beta state. The author is reasonably satisfied
with the current API and that functionality works as advertised. There
may be some backwards incompatible changes before 1.0. Though the author
does not intend to make any major changes to the Python API.

This project is vendored and distributed with Mercurial 4.1, where it is
used in a production capacity.

There is continuous integration for Python versions 2.6, 2.7, and 3.3+
on Linux x86_x64 and Windows x86 and x86_64. The author is reasonably
confident the extension is stable and works as advertised on these
platforms.

Expected Changes
----------------

The author is reasonably confident in the current state of what's
implemented on the ``ZstdCompressor`` and ``ZstdDecompressor`` types.
Those APIs likely won't change significantly. Some low-level behavior
(such as naming and types expected by arguments) may change.

There will likely be arguments added to control the input and output
buffer sizes (currently, certain operations read and write in chunk
sizes using zstd's preferred defaults).

There should be an API that accepts an object that conforms to the buffer
interface and returns an iterator over compressed or decompressed output.

The author is on the fence as to whether to support the extremely
low level compression and decompression APIs. It could be useful to
support compression without the framing headers. But the author doesn't
believe it a high priority at this time.

The CFFI bindings are feature complete and all tests run against both
the C extension and CFFI bindings to ensure behavior parity.

Requirements
============

This extension is designed to run with Python 2.6, 2.7, 3.3, 3.4, 3.5, and
3.6 on common platforms (Linux, Windows, and OS X). Only x86_64 is
currently well-tested as an architecture.

Installing
==========

This package is uploaded to PyPI at https://pypi.python.org/pypi/zstandard.
So, to install this package::

   $ pip install zstandard

Binary wheels are made available for some platforms. If you need to
install from a source distribution, all you should need is a working C
compiler and the Python development headers/libraries. On many Linux
distributions, you can install a ``python-dev`` or ``python-devel``
package to provide these dependencies.

Packages are also uploaded to Anaconda Cloud at
https://anaconda.org/indygreg/zstandard. See that URL for how to install
this package with ``conda``.

Performance
===========

Very crude and non-scientific benchmarking (most benchmarks fall in this
category because proper benchmarking is hard) show that the Python bindings
perform within 10% of the native C implementation.

The following table compares the performance of compressing and decompressing
a 1.1 GB tar file comprised of the files in a Firefox source checkout. Values
obtained with the ``zstd`` program are on the left. The remaining columns detail
performance of various compression APIs in the Python bindings.

+-------+-----------------+-----------------+-----------------+---------------+
| Level | Native          | Simple          | Stream In       | Stream Out    |
|       | Comp / Decomp   | Comp / Decomp   | Comp / Decomp   | Comp          |
+=======+=================+=================+=================+===============+
|   1   | 490 / 1338 MB/s | 458 / 1266 MB/s | 407 / 1156 MB/s |  405 MB/s     |
+-------+-----------------+-----------------+-----------------+---------------+
|   2   | 412 / 1288 MB/s | 381 / 1203 MB/s | 345 / 1128 MB/s |  349 MB/s     |
+-------+-----------------+-----------------+-----------------+---------------+
|   3   | 342 / 1312 MB/s | 319 / 1182 MB/s | 285 / 1165 MB/s |  287 MB/s     |
+-------+-----------------+-----------------+-----------------+---------------+
|  11   |  64 / 1506 MB/s |  66 / 1436 MB/s |  56 / 1342 MB/s |   57 MB/s     |
+-------+-----------------+-----------------+-----------------+---------------+

Again, these are very unscientific. But it shows that Python is capable of
compressing at several hundred MB/s and decompressing at over 1 GB/s.

Comparison to Other Python Bindings
===================================

https://pypi.python.org/pypi/zstd is an alternate Python binding to
Zstandard. At the time this was written, the latest release of that
package (1.1.2) only exposed the simple APIs for compression and decompression.
This package exposes much more of the zstd API, including streaming and
dictionary compression. This package also has CFFI support.

Bundling of Zstandard Source Code
=================================

The source repository for this project contains a vendored copy of the
Zstandard source code. This is done for a few reasons.

First, Zstandard is relatively new and not yet widely available as a system
package. Providing a copy of the source code enables the Python C extension
to be compiled without requiring the user to obtain the Zstandard source code
separately.

Second, Zstandard has both a stable *public* API and an *experimental* API.
The *experimental* API is actually quite useful (contains functionality for
training dictionaries for example), so it is something we wish to expose to
Python. However, the *experimental* API is only available via static linking.
Furthermore, the *experimental* API can change at any time. So, control over
the exact version of the Zstandard library linked against is important to
ensure known behavior.

Instructions for Building and Testing
=====================================

Once you have the source code, the extension can be built via setup.py::

   $ python setup.py build_ext

We recommend testing with ``nose``::

   $ nosetests

A Tox configuration is present to test against multiple Python versions::

   $ tox

Tests use the ``hypothesis`` Python package to perform fuzzing. If you
don't have it, those tests won't run.

There is also an experimental CFFI module. You need the ``cffi`` Python
package installed to build and test that.

To create a virtualenv with all development dependencies, do something
like the following::

  # Python 2
  $ virtualenv venv

  # Python 3
  $ python3 -m venv venv

  $ source venv/bin/activate
  $ pip install cffi hypothesis nose tox

API
===

The compiled C extension provides a ``zstd`` Python module. This module
exposes the following interfaces.

ZstdCompressor
--------------

The ``ZstdCompressor`` class provides an interface for performing
compression operations.

Each instance is associated with parameters that control compression
behavior. These come from the following named arguments (all optional):

level
   Integer compression level. Valid values are between 1 and 22.
dict_data
   Compression dictionary to use.

   Note: When using dictionary data and ``compress()`` is called multiple
   times, the ``CompressionParameters`` derived from an integer compression
   ``level`` and the first compressed data's size will be reused for all
   subsequent operations. This may not be desirable if source data size
   varies significantly.
compression_params
   A ``CompressionParameters`` instance (overrides the ``level`` value).
write_checksum
   Whether a 4 byte checksum should be written with the compressed data.
   Defaults to False. If True, the decompressor can verify that decompressed
   data matches the original input data.
write_content_size
   Whether the size of the uncompressed data will be written into the
   header of compressed data. Defaults to False. The data will only be
   written if the compressor knows the size of the input data. This is
   likely not true for streaming compression.
write_dict_id
   Whether to write the dictionary ID into the compressed data.
   Defaults to True. The dictionary ID is only written if a dictionary
   is being used.

Unless specified otherwise, assume that no two methods of ``ZstdCompressor``
instances can be called from multiple Python threads simultaneously. In other
words, assume instances are not thread safe unless stated otherwise.

Simple API
^^^^^^^^^^

``compress(data)`` compresses and returns data as a one-shot operation.::

   cctx = zstd.ZstdCompressor()
   compressed = cctx.compress(b'data to compress')

Unless ``compression_params`` or ``dict_data`` are passed to the
``ZstdCompressor``, each invocation of ``compress()`` will calculate the
optimal compression parameters for the configured compression ``level`` and
input data size (some parameters are fine-tuned for small input sizes).

If a compression dictionary is being used, the compression parameters
determined from the first input's size will be reused for subsequent
operations.

There is currently a deficiency in zstd's C APIs that makes it difficult
to round trip empty inputs when ``write_content_size=True``. Attempting
this will raise a ``ValueError`` unless ``allow_empty=True`` is passed
to ``compress()``.

Streaming Input API
^^^^^^^^^^^^^^^^^^^

``write_to(fh)`` (which behaves as a context manager) allows you to *stream*
data into a compressor.::

   cctx = zstd.ZstdCompressor(level=10)
   with cctx.write_to(fh) as compressor:
       compressor.write(b'chunk 0')
       compressor.write(b'chunk 1')
       ...

The argument to ``write_to()`` must have a ``write(data)`` method. As
compressed data is available, ``write()`` will be called with the compressed
data as its argument. Many common Python types implement ``write()``, including
open file handles and ``io.BytesIO``.

``write_to()`` returns an object representing a streaming compressor instance.
It **must** be used as a context manager. That object's ``write(data)`` method
is used to feed data into the compressor.

A ``flush()`` method can be called to evict whatever data remains within the
compressor's internal state into the output object. This may result in 0 or
more ``write()`` calls to the output object.

Both ``write()`` and ``flush()`` return the number of bytes written to the
object's ``write()``. In many cases, small inputs do not accumulate enough
data to cause a write and ``write()`` will return ``0``.

If the size of the data being fed to this streaming compressor is known,
you can declare it before compression begins::

   cctx = zstd.ZstdCompressor()
   with cctx.write_to(fh, size=data_len) as compressor:
       compressor.write(chunk0)
       compressor.write(chunk1)
       ...

Declaring the size of the source data allows compression parameters to
be tuned. And if ``write_content_size`` is used, it also results in the
content size being written into the frame header of the output data.

The size of chunks being ``write()`` to the destination can be specified::

    cctx = zstd.ZstdCompressor()
    with cctx.write_to(fh, write_size=32768) as compressor:
        ...

To see how much memory is being used by the streaming compressor::

    cctx = zstd.ZstdCompressor()
    with cctx.write_to(fh) as compressor:
        ...
        byte_size = compressor.memory_size()

Streaming Output API
^^^^^^^^^^^^^^^^^^^^

``read_from(reader)`` provides a mechanism to stream data out of a compressor
as an iterator of data chunks.::

   cctx = zstd.ZstdCompressor()
   for chunk in cctx.read_from(fh):
        # Do something with emitted data.

``read_from()`` accepts an object that has a ``read(size)`` method or conforms
to the buffer protocol. (``bytes`` and ``memoryview`` are 2 common types that
provide the buffer protocol.)

Uncompressed data is fetched from the source either by calling ``read(size)``
or by fetching a slice of data from the object directly (in the case where
the buffer protocol is being used). The returned iterator consists of chunks
of compressed data.

If reading from the source via ``read()``, ``read()`` will be called until
it raises or returns an empty bytes (``b''``). It is perfectly valid for
the source to deliver fewer bytes than were what requested by ``read(size)``.

Like ``write_to()``, ``read_from()`` also accepts a ``size`` argument
declaring the size of the input stream::

    cctx = zstd.ZstdCompressor()
    for chunk in cctx.read_from(fh, size=some_int):
        pass

You can also control the size that data is ``read()`` from the source and
the ideal size of output chunks::

    cctx = zstd.ZstdCompressor()
    for chunk in cctx.read_from(fh, read_size=16384, write_size=8192):
        pass

Unlike ``write_to()``, ``read_from()`` does not give direct control over the
sizes of chunks fed into the compressor. Instead, chunk sizes will be whatever
the object being read from delivers. These will often be of a uniform size.

Stream Copying API
^^^^^^^^^^^^^^^^^^

``copy_stream(ifh, ofh)`` can be used to copy data between 2 streams while
compressing it.::

   cctx = zstd.ZstdCompressor()
   cctx.copy_stream(ifh, ofh)

For example, say you wish to compress a file::

   cctx = zstd.ZstdCompressor()
   with open(input_path, 'rb') as ifh, open(output_path, 'wb') as ofh:
       cctx.copy_stream(ifh, ofh)

It is also possible to declare the size of the source stream::

   cctx = zstd.ZstdCompressor()
   cctx.copy_stream(ifh, ofh, size=len_of_input)

You can also specify how large the chunks that are ``read()`` and ``write()``
from and to the streams::

   cctx = zstd.ZstdCompressor()
   cctx.copy_stream(ifh, ofh, read_size=32768, write_size=16384)

The stream copier returns a 2-tuple of bytes read and written::

   cctx = zstd.ZstdCompressor()
   read_count, write_count = cctx.copy_stream(ifh, ofh)

Compressor API
^^^^^^^^^^^^^^

``compressobj()`` returns an object that exposes ``compress(data)`` and
``flush()`` methods. Each returns compressed data or an empty bytes.

The purpose of ``compressobj()`` is to provide an API-compatible interface
with ``zlib.compressobj`` and ``bz2.BZ2Compressor``. This allows callers to
swap in different compressor objects while using the same API.

``flush()`` accepts an optional argument indicating how to end the stream.
``zstd.COMPRESSOBJ_FLUSH_FINISH`` (the default) ends the compression stream.
Once this type of flush is performed, ``compress()`` and ``flush()`` can
no longer be called. This type of flush **must** be called to end the
compression context. If not called, returned data may be incomplete.

A ``zstd.COMPRESSOBJ_FLUSH_BLOCK`` argument to ``flush()`` will flush a
zstd block. Flushes of this type can be performed multiple times. The next
call to ``compress()`` will begin a new zstd block.

Here is how this API should be used::

   cctx = zstd.ZstdCompressor()
   cobj = cctx.compressobj()
   data = cobj.compress(b'raw input 0')
   data = cobj.compress(b'raw input 1')
   data = cobj.flush()

Or to flush blocks::

   cctx.zstd.ZstdCompressor()
   cobj = cctx.compressobj()
   data = cobj.compress(b'chunk in first block')
   data = cobj.flush(zstd.COMPRESSOBJ_FLUSH_BLOCK)
   data = cobj.compress(b'chunk in second block')
   data = cobj.flush()

For best performance results, keep input chunks under 256KB. This avoids
extra allocations for a large output object.

It is possible to declare the input size of the data that will be fed into
the compressor::

   cctx = zstd.ZstdCompressor()
   cobj = cctx.compressobj(size=6)
   data = cobj.compress(b'foobar')
   data = cobj.flush()

ZstdDecompressor
----------------

The ``ZstdDecompressor`` class provides an interface for performing
decompression.

Each instance is associated with parameters that control decompression. These
come from the following named arguments (all optional):

dict_data
   Compression dictionary to use.

The interface of this class is very similar to ``ZstdCompressor`` (by design).

Unless specified otherwise, assume that no two methods of ``ZstdDecompressor``
instances can be called from multiple Python threads simultaneously. In other
words, assume instances are not thread safe unless stated otherwise.

Simple API
^^^^^^^^^^

``decompress(data)`` can be used to decompress an entire compressed zstd
frame in a single operation.::

    dctx = zstd.ZstdDecompressor()
    decompressed = dctx.decompress(data)

By default, ``decompress(data)`` will only work on data written with the content
size encoded in its header. This can be achieved by creating a
``ZstdCompressor`` with ``write_content_size=True``. If compressed data without
an embedded content size is seen, ``zstd.ZstdError`` will be raised.

If the compressed data doesn't have its content size embedded within it,
decompression can be attempted by specifying the ``max_output_size``
argument.::

    dctx = zstd.ZstdDecompressor()
    uncompressed = dctx.decompress(data, max_output_size=1048576)

Ideally, ``max_output_size`` will be identical to the decompressed output
size.

If ``max_output_size`` is too small to hold the decompressed data,
``zstd.ZstdError`` will be raised.

If ``max_output_size`` is larger than the decompressed data, the allocated
output buffer will be resized to only use the space required.

Please note that an allocation of the requested ``max_output_size`` will be
performed every time the method is called. Setting to a very large value could
result in a lot of work for the memory allocator and may result in
``MemoryError`` being raised if the allocation fails.

If the exact size of decompressed data is unknown, it is **strongly**
recommended to use a streaming API.

Streaming Input API
^^^^^^^^^^^^^^^^^^^

``write_to(fh)`` can be used to incrementally send compressed data to a
decompressor.::

    dctx = zstd.ZstdDecompressor()
    with dctx.write_to(fh) as decompressor:
        decompressor.write(compressed_data)

This behaves similarly to ``zstd.ZstdCompressor``: compressed data is written to
the decompressor by calling ``write(data)`` and decompressed output is written
to the output object by calling its ``write(data)`` method.

Calls to ``write()`` will return the number of bytes written to the output
object. Not all inputs will result in bytes being written, so return values
of ``0`` are possible.

The size of chunks being ``write()`` to the destination can be specified::

    dctx = zstd.ZstdDecompressor()
    with dctx.write_to(fh, write_size=16384) as decompressor:
        pass

You can see how much memory is being used by the decompressor::

    dctx = zstd.ZstdDecompressor()
    with dctx.write_to(fh) as decompressor:
        byte_size = decompressor.memory_size()

Streaming Output API
^^^^^^^^^^^^^^^^^^^^

``read_from(fh)`` provides a mechanism to stream decompressed data out of a
compressed source as an iterator of data chunks.::

    dctx = zstd.ZstdDecompressor()
    for chunk in dctx.read_from(fh):
        # Do something with original data.

``read_from()`` accepts a) an object with a ``read(size)`` method that will
return  compressed bytes b) an object conforming to the buffer protocol that
can expose its data as a contiguous range of bytes. The ``bytes`` and
``memoryview`` types expose this buffer protocol.

``read_from()`` returns an iterator whose elements are chunks of the
decompressed data.

The size of requested ``read()`` from the source can be specified::

    dctx = zstd.ZstdDecompressor()
    for chunk in dctx.read_from(fh, read_size=16384):
        pass

It is also possible to skip leading bytes in the input data::

    dctx = zstd.ZstdDecompressor()
    for chunk in dctx.read_from(fh, skip_bytes=1):
        pass

Skipping leading bytes is useful if the source data contains extra
*header* data but you want to avoid the overhead of making a buffer copy
or allocating a new ``memoryview`` object in order to decompress the data.

Similarly to ``ZstdCompressor.read_from()``, the consumer of the iterator
controls when data is decompressed. If the iterator isn't consumed,
decompression is put on hold.

When ``read_from()`` is passed an object conforming to the buffer protocol,
the behavior may seem similar to what occurs when the simple decompression
API is used. However, this API works when the decompressed size is unknown.
Furthermore, if feeding large inputs, the decompressor will work in chunks
instead of performing a single operation.

Stream Copying API
^^^^^^^^^^^^^^^^^^

``copy_stream(ifh, ofh)`` can be used to copy data across 2 streams while
performing decompression.::

    dctx = zstd.ZstdDecompressor()
    dctx.copy_stream(ifh, ofh)

e.g. to decompress a file to another file::

    dctx = zstd.ZstdDecompressor()
    with open(input_path, 'rb') as ifh, open(output_path, 'wb') as ofh:
        dctx.copy_stream(ifh, ofh)

The size of chunks being ``read()`` and ``write()`` from and to the streams
can be specified::

    dctx = zstd.ZstdDecompressor()
    dctx.copy_stream(ifh, ofh, read_size=8192, write_size=16384)

Decompressor API
^^^^^^^^^^^^^^^^

``decompressobj()`` returns an object that exposes a ``decompress(data)``
methods. Compressed data chunks are fed into ``decompress(data)`` and
uncompressed output (or an empty bytes) is returned. Output from subsequent
calls needs to be concatenated to reassemble the full decompressed byte
sequence.

The purpose of ``decompressobj()`` is to provide an API-compatible interface
with ``zlib.decompressobj`` and ``bz2.BZ2Decompressor``. This allows callers
to swap in different decompressor objects while using the same API.

Each object is single use: once an input frame is decoded, ``decompress()``
can no longer be called.

Here is how this API should be used::

   dctx = zstd.ZstdDeompressor()
   dobj = cctx.decompressobj()
   data = dobj.decompress(compressed_chunk_0)
   data = dobj.decompress(compressed_chunk_1)

Content-Only Dictionary Chain Decompression
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

``decompress_content_dict_chain(frames)`` performs decompression of a list of
zstd frames produced using chained *content-only* dictionary compression. Such
a list of frames is produced by compressing discrete inputs where each
non-initial input is compressed with a *content-only* dictionary consisting
of the content of the previous input.

For example, say you have the following inputs::

   inputs = [b'input 1', b'input 2', b'input 3']

The zstd frame chain consists of:

1. ``b'input 1'`` compressed in standalone/discrete mode
2. ``b'input 2'`` compressed using ``b'input 1'`` as a *content-only* dictionary
3. ``b'input 3'`` compressed using ``b'input 2'`` as a *content-only* dictionary

Each zstd frame **must** have the content size written.

The following Python code can be used to produce a *content-only dictionary
chain*::

	def make_chain(inputs):
	    frames = []

		# First frame is compressed in standalone/discrete mode.
		zctx = zstd.ZstdCompressor(write_content_size=True)
		frames.append(zctx.compress(inputs[0]))

		# Subsequent frames use the previous fulltext as a content-only dictionary
		for i, raw in enumerate(inputs[1:]):
		    dict_data = zstd.ZstdCompressionDict(inputs[i])
			zctx = zstd.ZstdCompressor(write_content_size=True, dict_data=dict_data)
			frames.append(zctx.compress(raw))

		return frames

``decompress_content_dict_chain()`` returns the uncompressed data of the last
element in the input chain.

It is possible to implement *content-only dictionary chain* decompression
on top of other Python APIs. However, this function will likely be significantly
faster, especially for long input chains, as it avoids the overhead of
instantiating and passing around intermediate objects between C and Python.

Choosing an API
---------------

Various forms of compression and decompression APIs are provided because each
are suitable for different use cases.

The simple/one-shot APIs are useful for small data, when the decompressed
data size is known (either recorded in the zstd frame header via
``write_content_size`` or known via an out-of-band mechanism, such as a file
size).

A limitation of the simple APIs is that input or output data must fit in memory.
And unless using advanced tricks with Python *buffer objects*, both input and
output must fit in memory simultaneously.

Another limitation is that compression or decompression is performed as a single
operation. So if you feed large input, it could take a long time for the
function to return.

The streaming APIs do not have the limitations of the simple API. The cost to
this is they are more complex to use than a single function call.

The streaming APIs put the caller in control of compression and decompression
behavior by allowing them to directly control either the input or output side
of the operation.

With the streaming input APIs, the caller feeds data into the compressor or
decompressor as they see fit. Output data will only be written after the caller
has explicitly written data.

With the streaming output APIs, the caller consumes output from the compressor
or decompressor as they see fit. The compressor or decompressor will only
consume data from the source when the caller is ready to receive it.

One end of the streaming APIs involves a file-like object that must
``write()`` output data or ``read()`` input data. Depending on what the
backing storage for these objects is, those operations may not complete quickly.
For example, when streaming compressed data to a file, the ``write()`` into
a streaming compressor could result in a ``write()`` to the filesystem, which
may take a long time to finish due to slow I/O on the filesystem. So, there
may be overhead in streaming APIs beyond the compression and decompression
operations.

Dictionary Creation and Management
----------------------------------

Zstandard allows *dictionaries* to be used when compressing and
decompressing data. The idea is that if you are compressing a lot of similar
data, you can precompute common properties of that data (such as recurring
byte sequences) to achieve better compression ratios.

In Python, compression dictionaries are represented as the
``ZstdCompressionDict`` type.

Instances can be constructed from bytes::

   dict_data = zstd.ZstdCompressionDict(data)

It is possible to construct a dictionary from *any* data. Unless the
data begins with a magic header, the dictionary will be treated as
*content-only*. *Content-only* dictionaries allow compression operations
that follow to reference raw data within the content. For one use of
*content-only* dictionaries, see
``ZstdDecompressor.decompress_content_dict_chain()``.

More interestingly, instances can be created by *training* on sample data::

   dict_data = zstd.train_dictionary(size, samples)

This takes a list of bytes instances and creates and returns a
``ZstdCompressionDict``.

You can see how many bytes are in the dictionary by calling ``len()``::

   dict_data = zstd.train_dictionary(size, samples)
   dict_size = len(dict_data)  # will not be larger than ``size``

Once you have a dictionary, you can pass it to the objects performing
compression and decompression::

   dict_data = zstd.train_dictionary(16384, samples)

   cctx = zstd.ZstdCompressor(dict_data=dict_data)
   for source_data in input_data:
       compressed = cctx.compress(source_data)
       # Do something with compressed data.

   dctx = zstd.ZstdDecompressor(dict_data=dict_data)
   for compressed_data in input_data:
       buffer = io.BytesIO()
       with dctx.write_to(buffer) as decompressor:
           decompressor.write(compressed_data)
       # Do something with raw data in ``buffer``.

Dictionaries have unique integer IDs. You can retrieve this ID via::

   dict_id = zstd.dictionary_id(dict_data)

You can obtain the raw data in the dict (useful for persisting and constructing
a ``ZstdCompressionDict`` later) via ``as_bytes()``::

   dict_data = zstd.train_dictionary(size, samples)
   raw_data = dict_data.as_bytes()

Explicit Compression Parameters
-------------------------------

Zstandard's integer compression levels along with the input size and dictionary
size are converted into a data structure defining multiple parameters to tune
behavior of the compression algorithm. It is possible to use define this
data structure explicitly to have lower-level control over compression behavior.

The ``zstd.CompressionParameters`` type represents this data structure.
You can see how Zstandard converts compression levels to this data structure
by calling ``zstd.get_compression_parameters()``. e.g.::

    params = zstd.get_compression_parameters(5)

This function also accepts the uncompressed data size and dictionary size
to adjust parameters::

    params = zstd.get_compression_parameters(3, source_size=len(data), dict_size=len(dict_data))

You can also construct compression parameters from their low-level components::

    params = zstd.CompressionParameters(20, 6, 12, 5, 4, 10, zstd.STRATEGY_FAST)

You can then configure a compressor to use the custom parameters::

    cctx = zstd.ZstdCompressor(compression_params=params)

The members/attributes of ``CompressionParameters`` instances are as follows::

* window_log
* chain_log
* hash_log
* search_log
* search_length
* target_length
* strategy

This is the order the arguments are passed to the constructor if not using
named arguments.

You'll need to read the Zstandard documentation for what these parameters
do.

Frame Inspection
----------------

Data emitted from zstd compression is encapsulated in a *frame*. This frame
begins with a 4 byte *magic number* header followed by 2 to 14 bytes describing
the frame in more detail. For more info, see
https://github.com/facebook/zstd/blob/master/doc/zstd_compression_format.md.

``zstd.get_frame_parameters(data)`` parses a zstd *frame* header from a bytes
instance and return a ``FrameParameters`` object describing the frame.

Depending on which fields are present in the frame and their values, the
length of the frame parameters varies. If insufficient bytes are passed
in to fully parse the frame parameters, ``ZstdError`` is raised. To ensure
frame parameters can be parsed, pass in at least 18 bytes.

``FrameParameters`` instances have the following attributes:

content_size
   Integer size of original, uncompressed content. This will be ``0`` if the
   original content size isn't written to the frame (controlled with the
   ``write_content_size`` argument to ``ZstdCompressor``) or if the input
   content size was ``0``.

window_size
   Integer size of maximum back-reference distance in compressed data.

dict_id
   Integer of dictionary ID used for compression. ``0`` if no dictionary
   ID was used or if the dictionary ID was ``0``.

has_checksum
   Bool indicating whether a 4 byte content checksum is stored at the end
   of the frame.

Misc Functionality
------------------

estimate_compression_context_size(CompressionParameters)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Given a ``CompressionParameters`` struct, estimate the memory size required
to perform compression.

estimate_decompression_context_size()
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Estimate the memory size requirements for a decompressor instance.

Constants
---------

The following module constants/attributes are exposed:

ZSTD_VERSION
    This module attribute exposes a 3-tuple of the Zstandard version. e.g.
    ``(1, 0, 0)``
MAX_COMPRESSION_LEVEL
    Integer max compression level accepted by compression functions
COMPRESSION_RECOMMENDED_INPUT_SIZE
    Recommended chunk size to feed to compressor functions
COMPRESSION_RECOMMENDED_OUTPUT_SIZE
    Recommended chunk size for compression output
DECOMPRESSION_RECOMMENDED_INPUT_SIZE
    Recommended chunk size to feed into decompresor functions
DECOMPRESSION_RECOMMENDED_OUTPUT_SIZE
    Recommended chunk size for decompression output

FRAME_HEADER
    bytes containing header of the Zstandard frame
MAGIC_NUMBER
    Frame header as an integer

WINDOWLOG_MIN
    Minimum value for compression parameter
WINDOWLOG_MAX
    Maximum value for compression parameter
CHAINLOG_MIN
    Minimum value for compression parameter
CHAINLOG_MAX
    Maximum value for compression parameter
HASHLOG_MIN
    Minimum value for compression parameter
HASHLOG_MAX
    Maximum value for compression parameter
SEARCHLOG_MIN
    Minimum value for compression parameter
SEARCHLOG_MAX
    Maximum value for compression parameter
SEARCHLENGTH_MIN
    Minimum value for compression parameter
SEARCHLENGTH_MAX
    Maximum value for compression parameter
TARGETLENGTH_MIN
    Minimum value for compression parameter
TARGETLENGTH_MAX
    Maximum value for compression parameter
STRATEGY_FAST
    Compression strategy
STRATEGY_DFAST
    Compression strategy
STRATEGY_GREEDY
    Compression strategy
STRATEGY_LAZY
    Compression strategy
STRATEGY_LAZY2
    Compression strategy
STRATEGY_BTLAZY2
    Compression strategy
STRATEGY_BTOPT
    Compression strategy

Performance Considerations
--------------------------

The ``ZstdCompressor`` and ``ZstdDecompressor`` types maintain state to a
persistent compression or decompression *context*. Reusing a ``ZstdCompressor``
or ``ZstdDecompressor`` instance for multiple operations is faster than
instantiating a new ``ZstdCompressor`` or ``ZstdDecompressor`` for each
operation. The differences are magnified as the size of data decreases. For
example, the difference between *context* reuse and non-reuse for 100,000
100 byte inputs will be significant (possiby over 10x faster to reuse contexts)
whereas 10 1,000,000 byte inputs will be more similar in speed (because the
time spent doing compression dwarfs time spent creating new *contexts*).

Note on Zstandard's *Experimental* API
======================================

Many of the Zstandard APIs used by this module are marked as *experimental*
within the Zstandard project. This includes a large number of useful
features, such as compression and frame parameters and parts of dictionary
compression.

It is unclear how Zstandard's C API will evolve over time, especially with
regards to this *experimental* functionality. We will try to maintain
backwards compatibility at the Python API level. However, we cannot
guarantee this for things not under our control.

Since a copy of the Zstandard source code is distributed with this
module and since we compile against it, the behavior of a specific
version of this module should be constant for all of time. So if you
pin the version of this module used in your projects (which is a Python
best practice), you should be buffered from unwanted future changes.

Donate
======

A lot of time has been invested into this project by the author.

If you find this project useful and would like to thank the author for
their work, consider donating some money. Any amount is appreciated.

.. image:: https://www.paypalobjects.com/en_US/i/btn/btn_donate_LG.gif
    :target: https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=gregory%2eszorc%40gmail%2ecom&lc=US&item_name=python%2dzstandard&currency_code=USD&bn=PP%2dDonationsBF%3abtn_donate_LG%2egif%3aNonHosted
    :alt: Donate via PayPal

.. |ci-status| image:: https://travis-ci.org/indygreg/python-zstandard.svg?branch=master
    :target: https://travis-ci.org/indygreg/python-zstandard

.. |win-ci-status| image:: https://ci.appveyor.com/api/projects/status/github/indygreg/python-zstandard?svg=true
    :target: https://ci.appveyor.com/project/indygreg/python-zstandard
    :alt: Windows build status
author	Yuya Nishihara <yuya@tcha.org>
date	Sat, 25 Feb 2017 18:41:00 +0900
parents	c32454d69b85
children	e0dc40530c5a