view tests/test-export.t @ 23971:6becb9dbca25 stable

merge: mark .hgsubstate as possibly dirty before submerge for consistency

Before this patch, failure of updating subrepos may cause inconsistent
".hgsubstate". For example:

  1. dirstate entry for ".hgsubstate" of the parent repo is filled
     with valid size/date (via "hg state" or so)

  2. "hg update" is invoked at the parent repo

  3. ".hgsubstate" of the parent repo is updated on the filesystem as
     a part of "g"(et) action in "merge.applyupdates"

  4. it is assumed that size/date of ".hgsubstate" on the filesystem
     aren't changed from ones at (1)

     this is not so difficult condition, because just changing hash
     ids (every ids are same in length) in ".hgsubstate" doesn't
     change the file size of it

  5. "subrepo.submerge()" is invoked to update subrepos

  6. failure of updating in one of subrepos raises exception
     (e.g. "untracked file differs")

  7. "hg update" is aborted without updating dirstate of the parent repo

     dirstate entry for ".hgsubstate" still holds size/date at (1)

Then, ".hgsubstate" of the parent repo is treated as "CLEAN"
unexpectedly, because updating ".hgsubstate" at (3) doesn't change
size/date of it on the filesystem: see assumption at (4).

This inconsistent ".hgsubstate" status causes unexpected behavior, for
example:

  - "hg revert" forgets to revert ".hgsubstate"

  - "hg update" misunderstands that (not yet updated) subrepos diverge
    (then, it shows the prompt to confirm user's decision)

To avoid inconsistent ".hgsubstate" status above, this patch marks
".hgsubstate" as possibly dirty before "submerge" invocation.
"normallookup"-ed (= dirty) dirstate should be written out, even if
processing is aborted by failure.

This patch marks ".hgsubstate" as possibly dirty before "submerge",
also when it is removed or merged while merging, for safety. This
should prevent Mercurial from misunderstanding inconsistent
".hgsubstate" as clean.

To satisfy conditions at (1) and (4) above, this patch uses "hg status
--config debug.dirstate.delaywrite=2" (to fill valid size/date into
dirstate) and "touch" (to fix date of the file).

  $ hg init repo
  $ cd repo
  $ touch foo
  $ hg add foo
  $ for i in 0 1 2 3 4 5 6 7 8 9 10 11; do
  >    echo "foo-$i" >> foo
  >    hg ci -m "foo-$i"
  > done

  $ for out in "%nof%N" "%%%H" "%b-%R" "%h" "%r" "%m"; do
  >    echo
  >    echo "# foo-$out.patch"
  >    hg export -v -o "foo-$out.patch" 2:tip
  > done
  
  # foo-%nof%N.patch
  exporting patches:
  foo-01of10.patch
  foo-02of10.patch
  foo-03of10.patch
  foo-04of10.patch
  foo-05of10.patch
  foo-06of10.patch
  foo-07of10.patch
  foo-08of10.patch
  foo-09of10.patch
  foo-10of10.patch
  
  # foo-%%%H.patch
  exporting patches:
  foo-%617188a1c80f869a7b66c85134da88a6fb145f67.patch
  foo-%dd41a5ff707a5225204105611ba49cc5c229d55f.patch
  foo-%f95a5410f8664b6e1490a4af654e4b7d41a7b321.patch
  foo-%4346bcfde53b4d9042489078bcfa9c3e28201db2.patch
  foo-%afda8c3a009cc99449a05ad8aa4655648c4ecd34.patch
  foo-%35284ce2b6b99c9d2ac66268fe99e68e1974e1aa.patch
  foo-%9688c41894e6931305fa7165a37f6568050b4e9b.patch
  foo-%747d3c68f8ec44bb35816bfcd59aeb50b9654c2f.patch
  foo-%5f17a83f5fbd9414006a5e563eab4c8a00729efd.patch
  foo-%f3acbafac161ec68f1598af38f794f28847ca5d3.patch
  
  # foo-%b-%R.patch
  exporting patches:
  foo-repo-2.patch
  foo-repo-3.patch
  foo-repo-4.patch
  foo-repo-5.patch
  foo-repo-6.patch
  foo-repo-7.patch
  foo-repo-8.patch
  foo-repo-9.patch
  foo-repo-10.patch
  foo-repo-11.patch
  
  # foo-%h.patch
  exporting patches:
  foo-617188a1c80f.patch
  foo-dd41a5ff707a.patch
  foo-f95a5410f866.patch
  foo-4346bcfde53b.patch
  foo-afda8c3a009c.patch
  foo-35284ce2b6b9.patch
  foo-9688c41894e6.patch
  foo-747d3c68f8ec.patch
  foo-5f17a83f5fbd.patch
  foo-f3acbafac161.patch
  
  # foo-%r.patch
  exporting patches:
  foo-02.patch
  foo-03.patch
  foo-04.patch
  foo-05.patch
  foo-06.patch
  foo-07.patch
  foo-08.patch
  foo-09.patch
  foo-10.patch
  foo-11.patch
  
  # foo-%m.patch
  exporting patches:
  foo-foo_2.patch
  foo-foo_3.patch
  foo-foo_4.patch
  foo-foo_5.patch
  foo-foo_6.patch
  foo-foo_7.patch
  foo-foo_8.patch
  foo-foo_9.patch
  foo-foo_10.patch
  foo-foo_11.patch

Doing it again clobbers the files rather than appending:
  $ hg export -v -o "foo-%m.patch" 2:3
  exporting patches:
  foo-foo_2.patch
  foo-foo_3.patch
  $ grep HG foo-foo_2.patch | wc -l
  \s*1 (re)
  $ grep HG foo-foo_3.patch | wc -l
  \s*1 (re)

Exporting 4 changesets to a file:

  $ hg export -o export_internal 1 2 3 4
  $ grep HG export_internal | wc -l
  \s*4 (re)

Doing it again clobbers the file rather than appending:
  $ hg export -o export_internal 1 2 3 4
  $ grep HG export_internal | wc -l
  \s*4 (re)

Exporting 4 changesets to stdout:

  $ hg export 1 2 3 4 | grep HG | wc -l
  \s*4 (re)

Exporting revision -2 to a file:

  $ hg export -- -2
  # HG changeset patch
  # User test
  # Date 0 0
  #      Thu Jan 01 00:00:00 1970 +0000
  # Node ID 5f17a83f5fbd9414006a5e563eab4c8a00729efd
  # Parent  747d3c68f8ec44bb35816bfcd59aeb50b9654c2f
  foo-10
  
  diff -r 747d3c68f8ec -r 5f17a83f5fbd foo
  --- a/foo	Thu Jan 01 00:00:00 1970 +0000
  +++ b/foo	Thu Jan 01 00:00:00 1970 +0000
  @@ -8,3 +8,4 @@
   foo-7
   foo-8
   foo-9
  +foo-10

Checking if only alphanumeric characters are used in the file name (%m option):

  $ echo "line" >> foo
  $ hg commit -m " !\"#$%&(,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_\`abcdefghijklmnopqrstuvwxyz{|}~"
  $ hg export -v -o %m.patch tip
  exporting patch:
  ____________0123456789_______ABCDEFGHIJKLMNOPQRSTUVWXYZ______abcdefghijklmnopqrstuvwxyz____.patch

Catch exporting unknown revisions (especially empty revsets, see issue3353)

  $ hg export
  # HG changeset patch
  # User test
  # Date 0 0
  #      Thu Jan 01 00:00:00 1970 +0000
  # Node ID 197ecd81a57f760b54f34a58817ad5b04991fa47
  # Parent  f3acbafac161ec68f1598af38f794f28847ca5d3
   !"#$%&(,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~
  
  diff -r f3acbafac161 -r 197ecd81a57f foo
  --- a/foo	Thu Jan 01 00:00:00 1970 +0000
  +++ b/foo	Thu Jan 01 00:00:00 1970 +0000
  @@ -10,3 +10,4 @@
   foo-9
   foo-10
   foo-11
  +line

  $ hg export ""
  hg: parse error: empty query
  [255]
  $ hg export 999
  abort: unknown revision '999'!
  [255]
  $ hg export "not all()"
  abort: export requires at least one changeset
  [255]

Check for color output
  $ cat <<EOF >> $HGRCPATH
  > [color]
  > mode = ansi
  > [extensions]
  > color =
  > EOF

  $ hg export --color always --nodates tip
  # HG changeset patch
  # User test
  # Date 0 0
  #      Thu Jan 01 00:00:00 1970 +0000
  # Node ID * (glob)
  # Parent * (glob)
   !"#$%&(,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~
  
  \x1b[0;1mdiff -r f3acbafac161 -r 197ecd81a57f foo\x1b[0m (esc)
  \x1b[0;31;1m--- a/foo\x1b[0m (esc)
  \x1b[0;32;1m+++ b/foo\x1b[0m (esc)
  \x1b[0;35m@@ -10,3 +10,4 @@\x1b[0m (esc)
   foo-9
   foo-10
   foo-11
  \x1b[0;32m+line\x1b[0m (esc)


  $ cd ..